Package: acl Status: install ok installed Priority: optional Section: utils Installed-Size: 210 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: foreign Version: 2.3.1-3 Depends: libacl1 (= 2.3.1-3), libc6 (>= 2.34) Description: access control list - utilities This package contains the getfacl and setfacl utilities needed for manipulating access control lists. It also contains the chacl IRIX compatible utility. Homepage: https://savannah.nongnu.org/projects/acl/ Package: acpid Status: install ok installed Priority: optional Section: admin Installed-Size: 154 Maintainer: Josue Ortega Architecture: amd64 Source: acpid (1:2.0.33-2) Version: 1:2.0.33-2+b1 Depends: libc6 (>= 2.34), runit-helper (>= 2.14.0~), lsb-base (>= 3.2-14), kmod Pre-Depends: init-system-helpers (>= 1.54~) Recommends: acpi-support-base (>= 0.114-1) Breaks: runit (<< 2.1.2-46~) Conffiles: /etc/default/acpid 5b934527919a9bba89c7978d15e918b3 /etc/init.d/acpid 2ba41d3445b3052d9d2d170b7a9c30dc /etc/sv/acpid/.meta/installed d41d8cd98f00b204e9800998ecf8427e /etc/sv/acpid/log/run 64d44193d112303b5c9360c7cb87f2f4 /etc/sv/acpid/run c44d60de4e250d17d44545813b94a096 Description: Advanced Configuration and Power Interface event daemon Modern computers support the Advanced Configuration and Power Interface (ACPI) to allow intelligent power management on your system and to query battery and configuration status. . ACPID is a completely flexible, totally extensible daemon for delivering ACPI events. It listens on netlink interface (or on the deprecated file /proc/acpi/event), and when an event occurs, executes programs to handle the event. The programs it executes are configured through a set of configuration files, which can be dropped into place by packages or by the admin. Homepage: http://sourceforge.net/projects/acpid2/ Package: adduser Status: install ok installed Priority: important Section: admin Installed-Size: 686 Maintainer: Debian Adduser Developers Architecture: all Multi-Arch: foreign Version: 3.134 Depends: passwd Suggests: liblocale-gettext-perl, perl, cron, quota Conffiles: /etc/adduser.conf cc3493ecd2d09837ffdcc3e25fdfff18 /etc/deluser.conf 11a06baf8245fd8d690b99024d228c1f Description: add and remove users and groups This package includes the 'adduser' and 'deluser' commands for creating and removing users. . - 'adduser' creates new users and groups and adds existing users to existing groups; - 'deluser' removes users and groups and removes users from a given group. . Adding users with 'adduser' is much easier than adding them manually. 'Adduser' will choose UID and GID values that conform to Debian policy, create a home directory, copy skeletal user configuration, and automate setting initial values for the user's password, real name and so on. . 'Deluser' can back up and remove users' home directories and mail spool or all the files they own on the system. . A custom script can be executed after each of the commands. . 'Adduser' and 'Deluser' are intended to be used by the local administrator in lieu of the tools from the 'useradd' suite, and they provide support for easy use from Debian package maintainer scripts, functioning as kind of a policy layer to make those scripts easier and more stable to write and maintain. Package: apache2-utils Status: install ok installed Priority: optional Section: httpd Installed-Size: 446 Maintainer: Debian Apache Maintainers Architecture: amd64 Multi-Arch: foreign Source: apache2 Version: 2.4.67-1~deb12u3 Depends: libapr1 (>= 1.4.8-2~), libaprutil1 (>= 1.5.0), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libssl3 (>= 3.0.0) Description: Apache HTTP Server (utility programs for web servers) Provides some add-on programs useful for any web server. These include: - ab (Apache benchmark tool) - fcgistarter (Start a FastCGI program) - logresolve (Resolve IP addresses to hostnames in logfiles) - htpasswd (Manipulate basic authentication files) - htdigest (Manipulate digest authentication files) - htdbm (Manipulate basic authentication files in DBM format, using APR) - htcacheclean (Clean up the disk cache) - rotatelogs (Periodically stop writing to a logfile and open a new one) - split-logfile (Split a single log including multiple vhosts) - checkgid (Checks whether the caller can setgid to the specified group) - check_forensic (Extract mod_log_forensic output from Apache log files) - httxt2dbm (Generate dbm files for use with RewriteMap) Homepage: https://httpd.apache.org/ Package: apt Status: install ok installed Priority: required Section: admin Installed-Size: 4232 Maintainer: APT Development Team Architecture: amd64 Version: 2.6.1 Replaces: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~) Provides: apt-transport-https (= 2.6.1) Depends: adduser, gpgv | gpgv2 | gpgv1, libapt-pkg6.0 (>= 2.6.1), debian-archive-keyring, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgnutls30 (>= 3.7.5), libseccomp2 (>= 2.4.2), libstdc++6 (>= 11), libsystemd0 Recommends: ca-certificates Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), gnupg | gnupg2 | gnupg1, powermgmt-base Breaks: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~), aptitude (<< 0.8.10) Conffiles: /etc/apt/apt.conf.d/01autoremove 879455db9b938ce287b23383629aedce /etc/cron.daily/apt-compat 1400ab07a4a2905b04c33e3e93d42b7b /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3 Description: commandline package manager This package provides commandline tools for searching and managing as well as querying information about packages as a low-level access to all features of the libapt-pkg library. . These include: * apt-get for retrieval of packages and information about them from authenticated sources and for installation, upgrade and removal of packages together with their dependencies * apt-cache for querying available information about installed as well as installable packages * apt-cdrom to use removable media as a source for packages * apt-config as an interface to the configuration settings * apt-key as an interface to manage authentication keys Package: apt-transport-https Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 35 Maintainer: APT Development Team Architecture: all Multi-Arch: foreign Source: apt Version: 2.6.1 Depends: apt (>= 1.5~alpha4) Description: transitional package for https support This is a dummy transitional package - https support has been moved into the apt package in 1.5. It can be safely removed. Package: apt-utils Status: install ok installed Priority: important Section: admin Installed-Size: 1037 Maintainer: APT Development Team Architecture: amd64 Source: apt Version: 2.6.1 Depends: apt (= 2.6.1), libapt-pkg6.0 (>= 2.6.1), libc6 (>= 2.34), libdb5.3, libgcc-s1 (>= 3.0), libstdc++6 (>= 11) Description: package management related utility programs This package contains some less used commandline utilities related to package management with APT. . * apt-extracttemplates is used by debconf to prompt for configuration questions before installation. * apt-ftparchive is used to create Packages and other index files needed to publish an archive of Debian packages * apt-sortpkgs is a Packages/Sources file normalizer. Package: aptitude Status: install ok installed Priority: optional Section: admin Installed-Size: 4268 Maintainer: Aptitude Development Team Architecture: amd64 Multi-Arch: foreign Version: 0.8.13-5 Depends: aptitude-common (= 0.8.13-5), libapt-pkg6.0 (>= 1.9.0), libboost-iostreams1.74.0 (>= 1.74.0), libc6 (>= 2.33), libcwidget4 (>= 0.5.18-1), libgcc-s1 (>= 3.0), libncursesw6 (>= 6.1+20180210), libsigc++-2.0-0v5 (>= 2.8.0), libsqlite3-0 (>= 3.6.5), libstdc++6 (>= 11), libtinfo6 (>= 6.1+20180210), libxapian30 (>= 1.4.19~) Recommends: libdpkg-perl, sensible-utils Suggests: apt-xapian-index, aptitude-doc-en | aptitude-doc, debtags, tasksel Conffiles: /etc/cron.daily/aptitude f934222d5eb13cb132e2751bdb023318 /etc/logrotate.d/aptitude fb66bc5dc8c13edbcb83cea15ff86959 Description: terminal-based package manager aptitude is a package manager with a number of useful features, including: a mutt-like syntax for matching packages in a flexible manner, dselect-like persistence of user actions, the ability to retrieve and display the Debian changelog of most packages, and a command-line mode similar to that of apt-get. . aptitude is also Y2K-compliant, non-fattening, naturally cleansing, and housebroken. Homepage: https://wiki.debian.org/Aptitude Package: aptitude-common Status: install ok installed Priority: optional Section: admin Installed-Size: 10093 Maintainer: Aptitude Development Team Architecture: all Multi-Arch: foreign Source: aptitude Version: 0.8.13-5 Replaces: aptitude (<< 0.8.10-4) Recommends: aptitude Breaks: aptitude (<< 0.8.10-4) Description: architecture independent files for the aptitude package manager aptitude is a package manager with a number of useful features, including: a mutt-like syntax for matching packages in a flexible manner, dselect-like persistence of user actions, the ability to retrieve and display the Debian changelog of most packages, and a command-line mode similar to that of apt-get. . This package contains the data files and translations used by aptitude. Homepage: https://wiki.debian.org/Aptitude Package: at Status: install ok installed Priority: standard Section: admin Installed-Size: 159 Maintainer: Jose M Calhariz Architecture: amd64 Multi-Arch: foreign Source: at (3.2.5-1) Version: 3.2.5-1+b1 Depends: libpam-runtime (>= 1.0.1-11), lsb-base (>= 3.2-14), libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~) Recommends: default-mta | mail-transport-agent Conffiles: /etc/at.deny 8cb7e7632119dc26115436938efd2522 /etc/init.d/atd ce2de503acc3de02f544571e89d4d717 /etc/pam.d/atd ccdb71bdfe8764a2feb0f6e4ebbd378d Description: Delayed job execution and batch processing At and batch read shell commands from standard input storing them as a job to be scheduled for execution in the future. . Use at to run the job at a specified time batch to run the job when system load levels permit Homepage: http://blog.calhariz.com Package: autoconf Status: install ok installed Priority: optional Section: devel Installed-Size: 2025 Maintainer: Debian QA Group Architecture: all Multi-Arch: foreign Version: 2.71-3 Depends: perl (>> 5.005), m4 (>= 1.4.13), debianutils (>= 1.8) Recommends: automake | automaken Suggests: autoconf-archive, gnu-standards, autoconf-doc, libtool, gettext Breaks: gettext (<< 0.10.39), pkg-config (<< 0.25-1.1) Conffiles: /etc/emacs/site-start.d/50autoconf.el 297521889d690871ec9d89c5eeff745a Description: automatic configure script builder The standard for FSF source packages. This is only useful if you write your own programs or if you extensively modify other people's programs. . For an extensive library of additional Autoconf macros, install the `autoconf-archive' package. . This version of autoconf is not compatible with scripts meant for Autoconf 2.13 or earlier. Homepage: https://www.gnu.org/software/autoconf/ Package: automake Status: install ok installed Priority: optional Section: devel Installed-Size: 1837 Maintainer: Eric Dorland Architecture: all Multi-Arch: foreign Source: automake-1.16 Version: 1:1.16.5-1.3 Provides: automake-1.16, automaken Depends: autoconf, autotools-dev Suggests: autoconf-doc, gnu-standards Description: Tool for generating GNU Standards-compliant Makefiles Automake is a tool for automatically generating `Makefile.in's from files called `Makefile.am'. . The goal of Automake is to remove the burden of Makefile maintenance from the back of the individual GNU maintainer (and put it on the back of the Automake maintainer). . The `Makefile.am' is basically a series of `make' macro definitions (with rules being thrown in occasionally). The generated `Makefile.in's are compliant with the GNU Makefile standards. . Automake 1.16 fails to work in a number of situations that Automake 1.11, and 1.15 did, so some previous versions are available as separate packages. Homepage: https://www.gnu.org/software/automake/ Package: autotools-dev Status: install ok installed Priority: optional Section: devel Installed-Size: 134 Maintainer: Henrique de Moraes Holschuh Architecture: all Multi-Arch: foreign Version: 20220109.1 Replaces: autoconf (<< 2.70~) Breaks: autoconf (<< 2.70~) Enhances: cdbs, debhelper Description: Update infrastructure for config.{guess,sub} files This package installs an up-to-date version of config.guess and config.sub, used by the automake and libtool packages. It provides the canonical copy of those files for other packages as well. . It also documents in /usr/share/doc/autotools-dev/README.Debian.gz best practices and guidelines for using autoconf, automake and friends on Debian packages. This is a must-read for any developers packaging software that uses the GNU autotools, or GNU gettext. . Additionally this package provides seamless integration into Debhelper or CDBS, allowing maintainers to easily update config.{guess,sub} files in their packages. Homepage: https://savannah.gnu.org/projects/config/ Package: base-files Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 341 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Version: 12.4+deb12u14 Replaces: base, dpkg (<= 1.15.0), miscutils Provides: base Pre-Depends: awk Breaks: debian-security-support (<< 2019.04.25), initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~) Conffiles: /etc/debian_version 8fa9c9c6aa572e65e2c5ec4434499a86 /etc/dpkg/origins/debian c47b6815f67ad1aeccb0d4529bd0b990 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6 /etc/issue 349d61a0e072d678e3e94923f0c3ce0e /etc/issue.net 3ae9b9ff69a78d614864f1957778fecb /etc/update-motd.d/10-uname 9e1b832b7b06f566156e7c9e0548247b Description: Debian base system miscellaneous files This package contains the basic filesystem hierarchy of a Debian system, and several important miscellaneous files, such as /etc/debian_version, /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others, and the text of several common licenses in use on Debian systems. Package: base-passwd Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 247 Maintainer: Colin Watson Architecture: amd64 Multi-Arch: foreign Version: 3.6.1 Replaces: base Depends: libc6 (>= 2.34), libdebconfclient0 (>= 0.145), libselinux1 (>= 3.1~) Recommends: debconf (>= 0.5) | debconf-2.0 Description: Debian base system master password and group files These are the canonical master copies of the user database files (/etc/passwd and /etc/group), containing the Debian-allocated user and group IDs. The update-passwd tool is provided to keep the system databases synchronized with these master files. Package: bash Essential: yes Status: install ok installed Priority: required Section: shells Installed-Size: 7164 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: foreign Source: bash (5.2.15-2) Version: 5.2.15-2+b13 Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1) Depends: base-files (>= 2.1.12), debianutils (>= 5.6-0.1) Pre-Depends: libc6 (>= 2.36), libtinfo6 (>= 6) Recommends: bash-completion (>= 20060301-0) Suggests: bash-doc Conflicts: bash-completion (<< 20060301-0) Conffiles: /etc/bash.bashrc 89269e1298235f1b12b4c16e4065ad0d /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f /etc/skel/.bashrc ee35a240758f374832e809ae0ea4883a /etc/skel/.profile f4e81ade7d6f9fb342541152d08e7a97 Description: GNU Bourne Again SHell Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh). . Bash is ultimately intended to be a conformant implementation of the IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2). . The Programmable Completion Code, by Ian Macdonald, is now found in the bash-completion package. Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html Package: bash-completion Status: install ok installed Priority: standard Section: shells Installed-Size: 1463 Maintainer: Gabriel F. T. Gomes Architecture: all Multi-Arch: foreign Version: 1:2.11-6 Provides: dh-sequence-bash-completion Conffiles: /etc/bash_completion a81b3f1cb197219b815942f4fc7fa94e /etc/profile.d/bash_completion.sh 4257431f99f10e5fbe86b39b6b9e5002 Description: programmable completion for the bash shell bash completion extends bash's standard completion behavior to achieve complex command lines with just a few keystrokes. This project was conceived to produce programmable completion routines for the most common Linux/UNIX commands, reducing the amount of typing sysadmins and programmers need to do on a daily basis. Homepage: https://github.com/scop/bash-completion Package: bc Status: install ok installed Priority: standard Section: math Installed-Size: 241 Maintainer: Ryan Kavanagh Architecture: amd64 Multi-Arch: foreign Source: bc (1.07.1-3) Version: 1.07.1-3+b1 Depends: libc6 (>= 2.14), libreadline8 (>= 6.0) Description: GNU bc arbitrary precision calculator language GNU bc is an interactive algebraic language with arbitrary precision which follows the POSIX 1003.2 draft standard, with several extensions including multi-character variable names, an `else' statement and full Boolean expressions. GNU bc does not require the separate GNU dc program. Homepage: https://www.gnu.org/software/bc/ Package: bind9-host Status: install ok installed Priority: standard Section: net Installed-Size: 144 Maintainer: Debian DNS Team Architecture: amd64 Source: bind9 Version: 1:9.18.49-1~deb12u1 Replaces: bind-host (<< 1:9.13.6~) Provides: host Depends: bind9-libs (= 1:9.18.49-1~deb12u1), libc6 (>= 2.34), libidn2-0 (>= 2.0.0), libjemalloc2 (>= 3.5.0) Breaks: bind-host (<< 1:9.13.6~) Description: DNS Lookup Utility This package provides the 'host' DNS lookup utility in the form that is bundled with the BIND 9 sources. Homepage: https://www.isc.org/downloads/bind/ Package: bind9-libs Status: install ok installed Priority: standard Section: libs Installed-Size: 3506 Maintainer: Debian DNS Team Architecture: amd64 Multi-Arch: same Source: bind9 Version: 1:9.18.49-1~deb12u1 Replaces: bind-libs (<< 1:9.13.6~) Depends: libuv1 (>= 1.40.0), libc6 (>= 2.34), libfstrm0 (>= 0.2.0), libgssapi-krb5-2 (>= 1.17), libjemalloc2 (>= 4.0.0), libjson-c5 (>= 0.15), libkrb5-3 (>= 1.6.dfsg.2), liblmdb0 (>= 0.9.7), libmaxminddb0 (>= 1.3.0), libnghttp2-14 (>= 1.12.0), libprotobuf-c1 (>= 1.0.1), libssl3 (>= 3.0.0), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4) Breaks: bind-libs (<< 1:9.13.6~) Description: Shared Libraries used by BIND 9 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain name server. BIND 9 is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package contains a bundle of shared libraries used by BIND 9. Homepage: https://www.isc.org/downloads/bind/ Package: binutils Status: install ok installed Priority: optional Section: devel Installed-Size: 109 Maintainer: Matthias Klose Architecture: amd64 Version: 2.40-2 Provides: binutils-gold, elf-binutils Depends: binutils-common (= 2.40-2), libbinutils (= 2.40-2), binutils-x86-64-linux-gnu (= 2.40-2) Suggests: binutils-doc (>= 2.40-2) Conflicts: binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), binutils-multiarch (<< 2.27-8), modutils (<< 2.4.19-1) Description: GNU assembler, linker and binary utilities The programs in this package are used to assemble, link and manipulate binary and object files. They may be used in conjunction with a compiler and various libraries to build programs. Homepage: https://www.gnu.org/software/binutils/ Package: binutils-common Status: install ok installed Priority: optional Section: devel Installed-Size: 15021 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: binutils Version: 2.40-2 Replaces: binutils (<< 2.38.50.20220527-2), binutils-multiarch (<< 2.38.50.20220527-2) Breaks: binutils (<< 2.38.50.20220527-2), binutils-multiarch (<< 2.38.50.20220527-2) Conffiles: /etc/gprofng.rc d8f321679d2ce58b1399e4e6de17fcc9 Description: Common files for the GNU assembler, linker and binary utilities This package contains the localization files used by binutils packages for various target architectures and parts of the binutils documentation. It is not useful on its own. Homepage: https://www.gnu.org/software/binutils/ Package: binutils-x86-64-linux-gnu Status: install ok installed Priority: optional Section: devel Installed-Size: 11428 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Source: binutils Version: 2.40-2 Replaces: binutils (<< 2.29-6), binutils-dev (<< 2.38.50.20220609-2) Depends: binutils-common (= 2.40-2), libbinutils (= 2.40-2), libc6 (>= 2.36), libctf-nobfd0 (>= 2.36), libctf0 (>= 2.36), libgcc-s1 (>= 4.2), libgprofng0 (>= 2.40-2), libjansson4 (>= 2.14), libstdc++6 (>= 5), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Suggests: binutils-doc (= 2.40-2) Breaks: binutils (<< 2.29-6), binutils-dev (<< 2.38.50.20220609-2) Description: GNU binary utilities, for x86-64-linux-gnu target This package provides GNU assembler, linker and binary utilities for the x86-64-linux-gnu target. . You don't need this package unless you plan to cross-compile programs for x86-64-linux-gnu and x86-64-linux-gnu is not your native platform. Homepage: https://www.gnu.org/software/binutils/ Package: bsdextrautils Status: install ok installed Priority: optional Section: utils Installed-Size: 337 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: foreign Source: util-linux Version: 2.38.1-5+deb12u3 Replaces: bsdmainutils (<< 12.1.3), nwrite Depends: libc6 (>= 2.34), libsmartcols1 (>= 2.38), libtinfo6 (>= 6) Breaks: bsdmainutils (<< 12.1.3), nwrite Conflicts: nwrite Description: extra utilities from 4.4BSD-Lite This package contains some extra BSD utilities: col, colcrt, colrm, column, hd, hexdump, look, ul and write. Other BSD utilities are provided by bsdutils and calendar. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: bsdutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 355 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: foreign Source: util-linux (2.38.1-5+deb12u3) Version: 1:2.38.1-5+deb12u3 Pre-Depends: libc6 (>= 2.34), libsystemd0 Recommends: bsdextrautils Description: basic utilities from 4.4BSD-Lite This package contains the bare minimum of BSD utilities needed for a Debian system: logger, renice, script, scriptlive, scriptreplay and wall. The remaining standard BSD utilities are provided by bsdextrautils. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: btrfs-progs Status: install ok installed Priority: optional Section: admin Installed-Size: 4483 Maintainer: Nicholas D Steeves Architecture: amd64 Multi-Arch: foreign Version: 6.2-1+deb12u2 Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libext2fs2 (>= 1.42), liblzo2-2 (>= 2.02), libudev1 (>= 183), libuuid1 (>= 2.16), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.2.0) Suggests: duperemove Breaks: initramfs-tools (<< 0.137~) Description: Checksumming Copy on Write Filesystem utilities Btrfs is a copy on write filesystem for Linux aimed at implementing advanced features while focusing on fault tolerance, repair and easy administration. . This package contains utilities (mkfs, fsck) used to work with btrfs and an utility (btrfs-convert) to make a btrfs filesystem from an ext3. Homepage: http://btrfs.wiki.kernel.org/ Package: build-essential Status: install ok installed Priority: optional Section: devel Installed-Size: 20 Maintainer: Matthias Klose Architecture: amd64 Version: 12.9 Depends: libc6-dev | libc-dev, gcc (>= 4:10.2), g++ (>= 4:10.2), make, dpkg-dev (>= 1.17.11) Description: Informational list of build-essential packages If you do not plan to build Debian packages, you don't need this package. Starting with dpkg (>= 1.14.18) this package is required for building Debian packages. . This package contains an informational list of packages which are considered essential for building Debian packages. This package also depends on the packages on that list, to make it easy to have the build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. . This package is NOT the definition of what packages are build-essential; the real definition is in the Debian Policy Manual. This package contains merely an informational list, which is all most people need. However, if this package and the manual disagree, the manual is correct. Package: busybox Status: install ok installed Priority: optional Section: utils Installed-Size: 818 Maintainer: Debian Install System Team Architecture: amd64 Source: busybox (1:1.35.0-4+deb12u1) Version: 1:1.35.0-4+deb12u1+b1 Replaces: busybox-static Depends: libc6 (>= 2.34) Conflicts: busybox-static Description: Tiny utilities for small and embedded systems BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides minimalist replacements for the most common utilities you would usually find on your desktop system (i.e., ls, cp, mv, mount, tar, etc.). The utilities in BusyBox generally have fewer options than their full-featured GNU cousins; however, the options that are included provide the expected functionality and behave very much like their GNU counterparts. . This package installs the BusyBox binary but does not install symlinks for any of the supported utilities. Some of the utilities can be used in the system by installing the busybox-syslogd, busybox-udhcpc or busybox-udhcpd packages. Homepage: http://www.busybox.net Package: bzip2 Status: install ok installed Priority: standard Section: utils Installed-Size: 121 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: foreign Source: bzip2 (1.0.8-5) Version: 1.0.8-5+b1 Replaces: libbz2 (<< 0.9.5d-3) Depends: libbz2-1.0 (= 1.0.8-5+b1), libc6 (>= 2.34) Suggests: bzip2-doc Description: high-quality block-sorting file compressor - utilities bzip2 is a freely available, patent free, data compressor. . bzip2 compresses files using the Burrows-Wheeler block-sorting text compression algorithm, and Huffman coding. Compression is generally considerably better than that achieved by more conventional LZ77/LZ78-based compressors, and approaches the performance of the PPM family of statistical compressors. . The archive file format of bzip2 (.bz2) is incompatible with that of its predecessor, bzip (.bz). Homepage: https://sourceware.org/bzip2/ Package: ca-certificates Status: install ok installed Priority: standard Section: misc Installed-Size: 387 Maintainer: Julien Cristau Architecture: all Multi-Arch: foreign Version: 20230311+deb12u1 Depends: openssl (>= 1.1.1), debconf (>= 0.5) | debconf-2.0 Breaks: ca-certificates-java (<< 20121112+nmu1) Enhances: openssl Description: Common CA certificates Contains the certificate authorities shipped with Mozilla's browser to allow SSL-based applications to check for the authenticity of SSL connections. . Please note that Debian can neither confirm nor deny whether the certificate authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Full responsibility to assess them belongs to the local system administrator. Package: certbot Status: install ok installed Priority: optional Section: web Installed-Size: 159 Maintainer: Debian Let's Encrypt Architecture: all Source: python-certbot Version: 2.1.0-4 Replaces: letsencrypt Provides: letsencrypt Depends: python3-certbot (= 2.1.0-4), debconf (>= 0.5) | debconf-2.0, python3:any Suggests: python-certbot-doc, python3-certbot-apache, python3-certbot-nginx Conffiles: /etc/cron.d/certbot 284af9ad9d67d7d7e9092fdae2d86273 /etc/letsencrypt/cli.ini d409bf370c29a96fe865b5536b2135da /etc/logrotate.d/certbot a815a66a333f2637c00055fcd44b02d4 Description: automatically configure HTTPS using Let's Encrypt The objective of Certbot, Let's Encrypt, and the ACME (Automated Certificate Management Environment) protocol is to make it possible to set up an HTTPS server and have it automatically obtain a browser-trusted certificate, without any human intervention. This is accomplished by running a certificate management agent on the web server. . This agent is used to: . - Automatically prove to the Let's Encrypt CA that you control the website - Obtain a browser-trusted certificate and set it up on your web server - Keep track of when your certificate is going to expire, and renew it - Help you revoke the certificate if that ever becomes necessary. . This package contains the main application, including the standalone and the manual authenticators. Homepage: https://certbot.eff.org/ Package: cgit Status: install ok installed Priority: optional Section: net Installed-Size: 2388 Maintainer: Debian cgit Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1.2.3+git20221219.50.91f2590+git2.39.1-1 Depends: libc6 (>= 2.34), liblua5.1-0, zlib1g (>= 1:1.2.2) Recommends: apache2 (>= 2.4.6-4~) | httpd Suggests: python3, python3-docutils, python3-markdown, python3-pygments | highlight Conffiles: /etc/apache2/conf-available/cgit.conf ddb5eaa67bbbbed076bc160c37c6e186 /etc/cgitrc 4674dbe6f377f0fb7218dc12d4ffa750 Description: hyperfast web frontend for git repositories written in C This is an attempt to create a fast web interface for the Git SCM, using a built-in cache to decrease server I/O pressure. . Features: * basic repository browsing (logs, diffs, trees...) * caching of generated HTML * cloneable URLs (implements dumb HTTP transport) * commit feeds (atom format) * discovery of Git repositories * on-the-fly archives for tags and commits * plugin support for e.g. syntax highlighting * side-by-side diffs * simple time/author statistics * simple virtual hosting support (macro expansion) * understands GitWeb project-lists * understands gitweb.owner in Git config files * has extensive filtering framework using scripts or a built-in Lua interpreter Homepage: https://git.zx2c4.com/cgit/ Package: cifs-utils Status: install ok installed Priority: optional Section: otherosfs Installed-Size: 317 Maintainer: Debian Samba Maintainers Architecture: amd64 Version: 2:7.0-2 Replaces: smbfs (<< 2:4.0~rc1-1) Depends: libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libgssapi-krb5-2 (>= 1.17), libkeyutils1 (>= 1.4), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libtalloc2 (>= 2.0.4~git20101213), libwbclient0 (>= 2:4.0.3+dfsg1), python3 Recommends: keyutils Suggests: smbclient, winbind, bash-completion Conffiles: /etc/request-key.d/cifs.idmap.conf 4c95734a68b45b65a5dc7b108836427b /etc/request-key.d/cifs.spnego.conf db5289bad3063aea58e1814380259a28 Description: Common Internet File System utilities The SMB/CIFS protocol provides support for cross-platform file sharing with Microsoft Windows, OS X, and other Unix systems. . This package provides utilities for managing mounts of CIFS network file systems. Homepage: https://www.samba.org/~jlayton/cifs-utils/ Package: cloud-guest-utils Status: install ok installed Priority: optional Section: admin Installed-Size: 71 Maintainer: Debian Cloud Team Architecture: all Multi-Arch: foreign Source: cloud-utils Version: 0.33-1 Depends: e2fsprogs, fdisk, python3:any Recommends: gdisk Suggests: cloud-init Description: cloud guest utilities This package contains programs useful inside cloud instance. It contains 'growpart' for resizing a partition during boot, which is normally done with the aid of cloud-init. Homepage: https://launchpad.net/cloud-utils Package: cloud-image-utils Status: install ok installed Priority: optional Section: admin Installed-Size: 66 Maintainer: Debian Cloud Team Architecture: all Source: cloud-utils Version: 0.33-1 Depends: ca-certificates, e2fsprogs, file, genisoimage, qemu-utils, wget, python3:any Recommends: distro-info Suggests: mtools Description: cloud image management utilities This package provides a useful set of utilities for working with cloud images. It contains tools to help in modifying cloud images, running, and querying data related to cloud-images. Homepage: https://launchpad.net/cloud-utils Package: cloud-init Status: install ok installed Priority: optional Section: admin Installed-Size: 2709 Maintainer: Debian Cloud Team Architecture: all Version: 22.4.2-1+deb12u3 Replaces: cloud-init-22.4.2 Depends: eject, fdisk | util-linux (<< 2.29.2-3~), gdisk, isc-dhcp-client, locales, lsb-base, lsb-release, procps, python3-configobj, python3-jinja2, python3-jsonpatch, python3-jsonschema, python3-netifaces, python3-oauthlib, python3-requests, python3-serial, python3-yaml, python3:any Recommends: cloud-guest-utils, eatmydata, sudo Suggests: btrfs-progs, e2fsprogs, xfsprogs Conflicts: cloud-init-22.4.2 Conffiles: /etc/NetworkManager/dispatcher.d/cloud-init-hook-network-manager 5fe06610f28360e90a8c04febddd384b /etc/cloud/clean.d/README 022cf5eee551fc4956f021dac31dc939 /etc/cloud/cloud.cfg 9d104b8d5b749eeec889fbc9263c8381 /etc/cloud/cloud.cfg.d/05_logging.cfg b772a8bc0c407baba78b88e89d8fc743 /etc/cloud/cloud.cfg.d/README f5175bd4df5c37ce781f93d20f59561a /etc/cloud/templates/chef_client.rb.tmpl a0844ddc9a42776d41a03d62d10ea139 /etc/cloud/templates/chrony.conf.alpine.tmpl 9b5c5b4a39ae11562a5013812c11121d /etc/cloud/templates/chrony.conf.centos.tmpl 65413a48dedb31d23c93ac417e1a35e8 /etc/cloud/templates/chrony.conf.cos.tmpl 9f97cb21d10890cc268f4382c3f11149 /etc/cloud/templates/chrony.conf.debian.tmpl f6afc8fb02df02a7fad7672a67d34320 /etc/cloud/templates/chrony.conf.fedora.tmpl 8f56d3a782ade6693badf3832775fc82 /etc/cloud/templates/chrony.conf.freebsd.tmpl 8a975ac4cb5ee305bdcb9e0b5f600d90 /etc/cloud/templates/chrony.conf.opensuse.tmpl b7ff0b11f9bded1fc0be5f8806152541 /etc/cloud/templates/chrony.conf.photon.tmpl 8f56d3a782ade6693badf3832775fc82 /etc/cloud/templates/chrony.conf.rhel.tmpl 65413a48dedb31d23c93ac417e1a35e8 /etc/cloud/templates/chrony.conf.sles.tmpl b7ff0b11f9bded1fc0be5f8806152541 /etc/cloud/templates/chrony.conf.ubuntu.tmpl 1ce60fc8d7ab2a82cdf3e572fb9709ff /etc/cloud/templates/host.mariner.tmpl 12321ebb370f349597bf08c8b66d870f /etc/cloud/templates/hosts.alpine.tmpl b376c1ff07007f078ee9580cca61432f /etc/cloud/templates/hosts.arch.tmpl 8721e41953e3d91348b3bb9a17208c1a /etc/cloud/templates/hosts.debian.tmpl 941773df489d046d87ae491c3c95d8ec /etc/cloud/templates/hosts.freebsd.tmpl b93d8b13209900227fd7e1731ae23b0c /etc/cloud/templates/hosts.gentoo.tmpl de3df962ed420b5fa8ad0b338b8f262b /etc/cloud/templates/hosts.photon.tmpl 236edf211d757237c91834a5316dd083 /etc/cloud/templates/hosts.redhat.tmpl bd5a1edd50c1d8b27c5f51ed44040c19 /etc/cloud/templates/hosts.suse.tmpl 7a535f28d538e6bccaaa4dd7b9dd13c8 /etc/cloud/templates/ntp.conf.alpine.tmpl f7a7c7a340e07e36af23248317fb0c09 /etc/cloud/templates/ntp.conf.debian.tmpl 4234ee67d84a3da62e0d97c7329668df /etc/cloud/templates/ntp.conf.fedora.tmpl eb6d3fe3d4ddebfe0e310843e8bbc82b /etc/cloud/templates/ntp.conf.freebsd.tmpl b61275698a566f98fa4610a17a8f3c60 /etc/cloud/templates/ntp.conf.opensuse.tmpl e4bb5100b2dc442b6237ac7e1635acaa /etc/cloud/templates/ntp.conf.photon.tmpl 86295b29892a099d2b0a87461e81cf31 /etc/cloud/templates/ntp.conf.rhel.tmpl 3437363e2f2dd82c94f8c787fc957ee8 /etc/cloud/templates/ntp.conf.sles.tmpl e4bb5100b2dc442b6237ac7e1635acaa /etc/cloud/templates/ntp.conf.ubuntu.tmpl 645795fb4ef5d9801111f7d1eb27d91d /etc/cloud/templates/ntpd.conf.openbsd.tmpl 82dfebda546e4e023b0eec0993a58012 /etc/cloud/templates/resolv.conf.tmpl a32413c9f622d5dfa784ef43e3e9e2be /etc/cloud/templates/sources.list.debian.tmpl a7e69f77a32f15648cee0423fd1ed2bd /etc/cloud/templates/sources.list.ubuntu.tmpl d6b118c48d33b72eb035f8c673292923 /etc/cloud/templates/systemd.resolved.conf.tmpl a454bfaea86f3758d0078819985d711c /etc/cloud/templates/timesyncd.conf.tmpl 9c6b3af8058efc219987863f45bb9198 /etc/dhcp/dhclient-exit-hooks.d/hook-dhclient aa6f407b6895c130f2809755373e739f /etc/init.d/cloud-config 5be7f09acfb69f71526a9c6c23c31e32 /etc/init.d/cloud-final 15fc2d68231ce0929139589910314d99 /etc/init.d/cloud-init 81e6e95a2d2c8a45ea5b1ac4bc11e491 /etc/init.d/cloud-init-local 9bbb2ee504e1d08b1433fb85795bab7f /etc/profile.d/Z99-cloud-locale-test.sh ca1c7cfa9cf8f9192f3d44f74708e01f /etc/systemd/system/sshd-keygen@.service.d/disable-sshd-keygen-if-cloud-init-active.conf e7c2c31c4ceae9e9a4a5c4ef1c165727 Description: initialization system for infrastructure cloud instances Cloud-init provides a framework and tool to configure and customize virtual machine instances for Infrastructure-as-a-Service (IaaS) clouds platforms. It can for example set a default locale and hostname, generate SSH private host keys, install SSH public keys for logging into a default account, set up ephemeral mount points, and run user-provided scripts. . Various methods are supported for passing data to the instance at launch time, including the standard interfaces of multiple platforms. Homepage: https://launchpad.net/cloud-init Package: cloud-initramfs-growroot Status: install ok installed Priority: optional Section: admin Installed-Size: 21 Maintainer: Debian Cloud Architecture: all Source: cloud-initramfs-tools Version: 0.18.debian13+deb12u1 Depends: cloud-utils (>= 0.26-2~), initramfs-tools, fdisk | util-linux (<< 2.29.2-3~) Description: automatically resize the root partition on first boot This package adds functionality to an initramfs built by initramfs-tools. When installed, the initramfs will repartition a disk to make the root volume consume all space that follows it. . You most likely do not want this package unless you know what you are doing. It is primarily interesting in a virtualized environment when a disk can provisioned with a size larger than its original size. In this case, with this package installed, you can automatically use the new space without requiring a reboot to re-read the partition table. Homepage: http://launchpad.net/cloud-initramfs-tools Package: cloud-utils Status: install ok installed Priority: optional Section: admin Installed-Size: 20 Maintainer: Debian Cloud Team Architecture: all Version: 0.33-1 Depends: cloud-guest-utils, cloud-image-utils Description: metapackage for installation of upstream cloud-utils source This metapackage will depend on all sub-packages built by the upstream cloud-utils source. Homepage: https://launchpad.net/cloud-utils Package: console-setup Status: install ok installed Priority: optional Section: utils Installed-Size: 428 Maintainer: Debian Install System Team Architecture: all Multi-Arch: foreign Version: 1.221 Depends: console-setup-linux | console-setup-freebsd | hurd, xkb-data (>= 0.9), keyboard-configuration (= 1.221), debconf (>= 0.5) | debconf-2.0 Pre-Depends: debconf | debconf-2.0 Suggests: lsb-base (>= 3.0-6), locales Breaks: lsb (<< 2.0-6), lsb-base (<< 3.0-6), lsb-core (<< 2.0-6) Conflicts: console-setup-mini Description: console font and keymap setup program This package provides the console with the same keyboard configuration scheme as the X Window System. As a result, there is no need to duplicate or change the keyboard files just to make simple customizations such as the use of dead keys, the key functioning as AltGr or Compose key, the key(s) to switch between Latin and non-Latin mode, etc. . The package also installs console fonts supporting many of the world's languages. It provides an unified set of font faces - the classic VGA, the simplistic Fixed, and the cleaned Terminus, TerminusBold and TerminusBoldVGA. Package: console-setup-linux Status: install ok installed Priority: optional Section: utils Installed-Size: 2192 Maintainer: Debian Install System Team Architecture: all Multi-Arch: foreign Source: console-setup Version: 1.221 Replaces: console-setup (<< 1.71), console-terminus Provides: console-terminus Depends: kbd (>= 0.99-12) | console-tools (>= 1:0.2.3-16), keyboard-configuration (= 1.221), init-system-helpers (>= 1.29~) | initscripts Suggests: console-setup Breaks: console-cyrillic (<= 0.9-11), console-setup (<< 1.71), console-terminus Conflicts: console-setup-freebsd Conffiles: /etc/console-setup/compose.ARMSCII-8.inc fef36b61fb8b1cacc151ad3db127f777 /etc/console-setup/compose.CP1251.inc fef88d8c8dd4c726498003fd3cd84a7f /etc/console-setup/compose.CP1255.inc c972a2e90938657e97b643366b98b2ed /etc/console-setup/compose.CP1256.inc 5ea5e4d41da7a88f742863810e86144b /etc/console-setup/compose.GEORGIAN-ACADEMY.inc b6d80f40abff7e8af236796ebaca0247 /etc/console-setup/compose.GEORGIAN-PS.inc cf45272b6bf35a22223b132600dc36c3 /etc/console-setup/compose.IBM1133.inc a31102602f7e7cab9738022b6c5469ae /etc/console-setup/compose.ISIRI-3342.inc 5ada7fbba750192f11fa238add232ba9 /etc/console-setup/compose.ISO-8859-1.inc f22c32b3b801b60434016c975b5fb66e /etc/console-setup/compose.ISO-8859-10.inc e5fce59617c839b56574c9e323d34686 /etc/console-setup/compose.ISO-8859-11.inc ad2f3cc7ee64602a790bad8a2a989243 /etc/console-setup/compose.ISO-8859-13.inc abbb4fb36d084295075305e33195bd4a /etc/console-setup/compose.ISO-8859-14.inc 3a7519688a9cee5d5f90a5f74b854490 /etc/console-setup/compose.ISO-8859-15.inc 6fd4b1ba84bb627815f6119440e84906 /etc/console-setup/compose.ISO-8859-16.inc 8245c19b5262d8d23ca856587739eb20 /etc/console-setup/compose.ISO-8859-2.inc cd59fdcc7891012d905cdafd3704144a /etc/console-setup/compose.ISO-8859-3.inc 904839fe56359e4822667d241c131f3a /etc/console-setup/compose.ISO-8859-4.inc 414ddf28bfcc94a43191b134e264dfdd /etc/console-setup/compose.ISO-8859-5.inc f861a4b0403490677e6d400f2d7129da /etc/console-setup/compose.ISO-8859-6.inc 41ea36ea1c1a1c0c9bebdf0016395e1f /etc/console-setup/compose.ISO-8859-7.inc 83ee498d8b5eba5ce8ba593b3036f832 /etc/console-setup/compose.ISO-8859-8.inc 9cceaa9f3312f89aba371d3c893f4e7b /etc/console-setup/compose.ISO-8859-9.inc 2df0be84482af83b9d3e124e9ea37513 /etc/console-setup/compose.KOI8-R.inc b6a49ca842c8002b4e3de916f98d180e /etc/console-setup/compose.KOI8-U.inc d59865b46fcb821935da42feb335c1c5 /etc/console-setup/compose.TIS-620.inc 31b73af83ef3993c128e2b983b9eaf89 /etc/console-setup/compose.VISCII.inc edf0e2f7abd0de5184ba5c6d27939af6 /etc/console-setup/remap.inc b72cfe32ffa93987f74c5cec9ac180fd /etc/init.d/console-setup.sh 6d5b1d0c7a12da4e4f70836fe3fec827 /etc/init.d/keyboard-setup.sh 5746e83ec4ca1bda09967a00fe9266fb Description: Linux specific part of console-setup This package includes fonts in psf format and definitions of various 8-bit charmaps. Package: coreutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 18062 Maintainer: Michael Stone Architecture: amd64 Multi-Arch: foreign Version: 9.1-1 Pre-Depends: libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.44), libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg1), libselinux1 (>= 3.1~) Description: GNU core utilities This package contains the basic file, shell and text manipulation utilities which are expected to exist on every operating system. . Specifically, this package includes: arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir dircolors dirname du echo env expand expr factor false flock fmt fold groups head hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test timeout touch tr true truncate tsort tty uname unexpand uniq unlink users vdir wc who whoami yes Homepage: http://gnu.org/software/coreutils Package: cpio Status: install ok installed Priority: important Section: utils Installed-Size: 1141 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: foreign Version: 2.13+dfsg-7.1 Replaces: cpio-mt Depends: libc6 (>= 2.34) Suggests: libarchive-dev Conflicts: cpio-mt, mt-st (<< 0.6) Description: GNU cpio -- a program to manage archives of files GNU cpio is a tool for creating and extracting archives, or copying files from one place to another. It handles a number of cpio formats as well as reading and writing tar files. Homepage: https://www.gnu.org/software/cpio/ Package: cpp Status: install ok installed Priority: optional Section: interpreters Installed-Size: 30 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: allowed Source: gcc-defaults (1.203) Version: 4:12.2.0-3 Depends: cpp-12 (>= 12.2.0-1~) Suggests: cpp-doc Conflicts: cpp-doc (<< 1:2.95.3) Description: GNU C preprocessor (cpp) The GNU C preprocessor is a macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor but not the compiler. . This is a dependency package providing the default GNU C preprocessor. Package: cpp-12 Status: install ok installed Priority: optional Section: interpreters Installed-Size: 33848 Maintainer: Debian GCC Maintainers Architecture: amd64 Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.36), libgmp10 (>= 2:6.2.1+dfsg1), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Suggests: gcc-12-locales (>= 12), cpp-12-doc (>= 12) Breaks: hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4) Description: GNU C preprocessor A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor but not the compiler. Homepage: http://gcc.gnu.org/ Package: cron Status: install ok installed Priority: important Section: admin Installed-Size: 217 Maintainer: Javier Fernández-Sanguino Peña Architecture: amd64 Multi-Arch: foreign Version: 3.0pl1-162 Replaces: bcron, cronie, systemd-cron Provides: cron-daemon Depends: libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), sensible-utils, libpam-runtime Pre-Depends: init-system-helpers (>= 1.54~), cron-daemon-common Recommends: default-mta | mail-transport-agent Suggests: anacron, logrotate, checksecurity Conflicts: bcron, cronie, systemd-cron Conffiles: /etc/default/cron eae0d979b5007d2af41540d8c2631359 /etc/init.d/cron 4824366b523de668591f5b6e258c7043 /etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0 Description: process scheduling daemon The cron daemon is a background process that runs particular programs at particular times (for example, every minute, day, week, or month), as specified in a crontab. By default, users may also create crontabs of their own so that processes are run on their behalf. . Output from the commands is usually mailed to the system administrator (or to the user in question); you should probably install a mail system as well so that you can receive these messages. . This cron package does not provide any system maintenance tasks. Basic periodic maintenance tasks are provided by other packages, such as checksecurity. Homepage: https://ftp.isc.org/isc/cron/ Package: cron-daemon-common Status: install ok installed Priority: important Section: admin Installed-Size: 44 Maintainer: Javier Fernández-Sanguino Peña Architecture: all Source: cron Version: 3.0pl1-162 Replaces: bcron (<< 0.11-9.1), cron (<< 3.0pl1-140), cronie (<< 1.6.1-5), systemd-cron (<< 1.15.18-1.1) Depends: adduser Breaks: systemd-cron (<< 1.15.19-5~) Conflicts: bcron (<< 0.11-9.1), cron (<< 3.0pl1-140), cronie (<< 1.6.1-5), systemd-cron (<< 1.15.18-1.1) Conffiles: /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2 /etc/cron.yearly/.placeholder e5e12910bf011222160404d7bdb824f2 /etc/crontab db66112a5d1014af79fd8077170ddcfa Description: process scheduling daemon's configuration files The cron daemon is a background process that runs particular programs at particular times (for example, every minute, day, week, or month), as specified in a crontab. By default, users may also create crontabs of their own so that processes are run on their behalf. . This package provides configuration files which must be there to define scheduled process sets. Homepage: https://ftp.isc.org/isc/cron/ Package: cryptsetup Status: install ok installed Priority: optional Section: admin Installed-Size: 410 Maintainer: Debian Cryptsetup Team Architecture: amd64 Multi-Arch: foreign Version: 2:2.6.1-4~deb12u2 Replaces: cryptsetup-run (<< 2:2.1.0-6) Depends: cryptsetup-bin (>= 2:1.6.0), dmsetup, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34) Suggests: cryptsetup-initramfs, dosfstools, keyutils, liblocale-gettext-perl Breaks: cryptsetup-run (<< 2:2.1.0-6) Conffiles: /etc/default/cryptdisks 3e3b2248193105b5ecd9456c01ef3736 /etc/init.d/cryptdisks 8dd64a17dcefb1dd1a60eec286a6b502 /etc/init.d/cryptdisks-early 9c68271b34d88afd2764cdb203af9bd1 Description: disk encryption support - startup scripts Cryptsetup provides an interface for configuring encryption on block devices (such as /home or swap partitions), using the Linux kernel device mapper target dm-crypt. It features integrated Linux Unified Key Setup (LUKS) support. . Cryptsetup is backwards compatible with the on-disk format of cryptoloop, but also supports more secure formats. This package includes support for automatically configuring encrypted devices at boot time via the config file /etc/crypttab. Additional features are cryptoroot support through initramfs-tools and several supported ways to read a passphrase or key. . This package provides the cryptdisks_start and _stop wrappers, as well as luksformat. Homepage: https://gitlab.com/cryptsetup/cryptsetup Package: cryptsetup-bin Status: install ok installed Priority: optional Section: admin Installed-Size: 2328 Maintainer: Debian Cryptsetup Team Architecture: amd64 Multi-Arch: foreign Source: cryptsetup Version: 2:2.6.1-4~deb12u2 Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.34), libcryptsetup12 (>= 2:2.6), libpopt0 (>= 1.14), libuuid1 (>= 2.16) Description: disk encryption support - command line tools Cryptsetup provides an interface for configuring encryption on block devices (such as /home or swap partitions), using the Linux kernel device mapper target dm-crypt. It features integrated Linux Unified Key Setup (LUKS) support. . This package provides the cryptsetup, integritysetup and veritysetup utilities. Homepage: https://gitlab.com/cryptsetup/cryptsetup Package: cryptsetup-initramfs Status: install ok installed Priority: optional Section: admin Installed-Size: 107 Maintainer: Debian Cryptsetup Team Architecture: all Source: cryptsetup Version: 2:2.6.1-4~deb12u2 Replaces: cryptsetup (<< 2:2.0.3-1) Depends: busybox | busybox-static, cryptsetup (>= 2:2.6.1-4~deb12u2), initramfs-tools (>= 0.137) | linux-initramfs-tool, debconf (>= 0.5) | debconf-2.0 Recommends: console-setup, kbd Breaks: cryptsetup (<< 2:2.0.3-1) Conflicts: lvm2 (<< 2.03.15-1) Conffiles: /etc/cryptsetup-initramfs/conf-hook 9a127a9edfca239740eba9197b0b901f Description: disk encryption support - initramfs integration Cryptsetup provides an interface for configuring encryption on block devices (such as /home or swap partitions), using the Linux kernel device mapper target dm-crypt. It features integrated Linux Unified Key Setup (LUKS) support. . This package provides initramfs integration for cryptsetup. Homepage: https://gitlab.com/cryptsetup/cryptsetup Package: curl Status: install ok installed Priority: optional Section: web Installed-Size: 489 Maintainer: Alessandro Ghedini Architecture: amd64 Multi-Arch: foreign Version: 7.88.1-10+deb12u14 Depends: libc6 (>= 2.34), libcurl4 (= 7.88.1-10+deb12u14), zlib1g (>= 1:1.1.4) Description: command line tool for transferring data with URL syntax curl is a command line tool for transferring data with URL syntax, supporting DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP. . curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a busload of other useful tricks. Homepage: https://curl.se/ Package: dash Essential: yes Status: install ok installed Priority: required Section: shells Installed-Size: 191 Maintainer: Andrej Shadura Architecture: amd64 Multi-Arch: foreign Version: 0.5.12-2 Depends: debianutils (>= 5.6-0.1), dpkg (>= 1.19.1) Pre-Depends: libc6 (>= 2.34) Description: POSIX-compliant shell The Debian Almquist Shell (dash) is a POSIX-compliant shell derived from ash. . Since it executes scripts faster than bash, and has fewer library dependencies (making it more robust against software or hardware failures), it is used as the default system shell on Debian systems. Homepage: http://gondor.apana.org.au/~herbert/dash/ Package: dbus Status: install ok installed Priority: standard Section: admin Installed-Size: 182 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: foreign Version: 1.14.10-1~deb12u1 Provides: dbus-system-bus (= 1.14.10-1~deb12u1), default-dbus-system-bus Depends: dbus-bin (= 1.14.10-1~deb12u1), dbus-daemon (= 1.14.10-1~deb12u1), dbus-system-bus-common (>= 1.14.10-1~deb12u1), libc6 (>= 2.34), libdbus-1-3 (= 1.14.10-1~deb12u1), libexpat1 (>= 2.1~beta3), libsystemd0 Pre-Depends: init-system-helpers (>= 1.54~) Suggests: default-dbus-session-bus | dbus-session-bus Conffiles: /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015 /etc/init.d/dbus d78b20b35de983cf6f1475dcf8cb21a1 Description: simple interprocess messaging system (system message bus) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . D-Bus supports broadcast messages, asynchronous messages (thus decreasing latency), authentication, and more. It is designed to be low-overhead; messages are sent using a binary protocol, not using XML. D-Bus also supports a method call mapping for its messages, but it is not required; this makes using the system quite simple. . It comes with several bindings, including GLib, Python, Qt and Java. . This package provides a fully-functional D-Bus system bus with activation support, used for communication between system services, and depends on most of the other components of the reference implementation of D-Bus. . To provide a complete D-Bus session bus, install one of the packages that implement the dbus-session-bus virtual package, such as dbus-user-session. The recommended implementation is indicated by the default-dbus-session-bus virtual package. Homepage: https://dbus.freedesktop.org/ Package: dbus-bin Status: install ok installed Priority: optional Section: admin Installed-Size: 213 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: foreign Source: dbus Version: 1.14.10-1~deb12u1 Replaces: dbus (<< 1.13.18-2~) Depends: libc6 (>= 2.34), libdbus-1-3 (= 1.14.10-1~deb12u1) Breaks: dbus (<< 1.13.18-2~) Description: simple interprocess messaging system (command line utilities) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . This package contains the D-Bus command-line utilities such as dbus-send and dbus-monitor. Homepage: https://dbus.freedesktop.org/ Package: dbus-daemon Status: install ok installed Priority: optional Section: admin Installed-Size: 375 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: foreign Source: dbus Version: 1.14.10-1~deb12u1 Replaces: dbus (<< 1.13.18-2~) Depends: dbus-bin (= 1.14.10-1~deb12u1), dbus-session-bus-common (>= 1.14.10-1~deb12u1), libapparmor1 (>= 2.8.94), libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libdbus-1-3 (= 1.14.10-1~deb12u1), libexpat1 (>= 2.1~beta3), libselinux1 (>= 3.1~), libsystemd0 Breaks: dbus (<< 1.13.18-2~) Description: simple interprocess messaging system (reference message bus) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . This package contains dbus-daemon, the reference implementation of a D-Bus message bus, and dbus-run-session, a utility to start a temporary session dbus-daemon in a constrained environment or for automated tests. . To provide a complete D-Bus session bus, install one of the packages that implement the dbus-session-bus virtual package, such as dbus-user-session. The recommended implementation is indicated by the default-dbus-session-bus virtual package. Homepage: https://dbus.freedesktop.org/ Package: dbus-session-bus-common Status: install ok installed Priority: optional Section: admin Installed-Size: 107 Maintainer: Utopia Maintenance Team Architecture: all Multi-Arch: foreign Source: dbus Version: 1.14.10-1~deb12u1 Replaces: dbus (<< 1.13.18-2~) Breaks: dbus (<< 1.13.18-2~) Description: simple interprocess messaging system (session bus configuration) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . This package contains the configuration files defining the behaviour of the D-Bus session bus, used for applications and per-user services. These are used by the reference implementation in the dbus package, and by the reimplementation in the dbus-broker package. . To provide a complete D-Bus session bus, install one of the packages that implement the dbus-session-bus virtual package, such as dbus-user-session. The recommended implementation is indicated by the default-dbus-session-bus virtual package. Homepage: https://dbus.freedesktop.org/ Package: dbus-system-bus-common Status: install ok installed Priority: optional Section: admin Installed-Size: 119 Maintainer: Utopia Maintenance Team Architecture: all Multi-Arch: foreign Source: dbus Version: 1.14.10-1~deb12u1 Replaces: dbus (<< 1.13.18-2~) Depends: adduser Breaks: dbus (<< 1.13.18-2~) Description: simple interprocess messaging system (system bus configuration) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . This package contains the configuration files defining the behaviour of the D-Bus system bus, used for system services such as networking and storage management services. It is also responsible for creating the 'messagebus' system user account used to run the system bus. These are used by the reference implementation in the dbus package, and by the reimplementation in the dbus-broker package. . To provide a complete D-Bus system bus, install one of the packages that implement the dbus-system-bus virtual package, such as dbus. The recommended implementation is indicated by the default-dbus-system-bus virtual package. Homepage: https://dbus.freedesktop.org/ Package: dbus-user-session Status: install ok installed Priority: optional Section: admin Installed-Size: 111 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: foreign Source: dbus Version: 1.14.10-1~deb12u1 Provides: dbus-session-bus, default-dbus-session-bus Depends: dbus-daemon (= 1.14.10-1~deb12u1) | dbus-broker, dbus-session-bus-common (>= 1.14.10-1~deb12u1), libpam-systemd, systemd Recommends: systemd-sysv Conffiles: /etc/X11/Xsession.d/20dbus_xdg-runtime f11c70d9f51a152cedf939d36ef038bf Description: simple interprocess messaging system (systemd --user integration) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . On systemd systems, this package opts in to the session model in which a user's session starts the first time they log in, and does not end until all their login sessions have ended. This model merges all parallel non-graphical login sessions (text mode, ssh, cron, etc.), and up to one graphical session, into a single "user-session" or "super-session" within which all background D-Bus services are shared. . Multiple graphical sessions per user are not currently supported in this mode; as a result, it is particularly suitable for gdm, which responds to requests to open a parallel graphical session by switching to the existing graphical session and unlocking it. . To retain dbus' traditional session semantics, in which login sessions are artificially isolated from each other, remove this package and install dbus-x11 instead. . See the dbus package description for more information about D-Bus in general. Homepage: https://dbus.freedesktop.org/ Package: deb.torproject.org-keyring Status: install ok installed Priority: important Section: misc Installed-Size: 20 Maintainer: Peter Palfrader Architecture: all Version: 2025.08.08 Conffiles: /etc/apt/trusted.gpg.d/deb.torproject.org-keyring.gpg 0dea6eb91fba670db5a6ff824d40552a Description: GnuPG archive key of the deb.torproject.org repository The deb.torproject.org repository digitally signs its Release files. This package contains the current repository key used for that, and upon installation configures your system to accept archives signed with this key. Package: debconf Status: install ok installed Priority: required Section: admin Installed-Size: 491 Maintainer: Debconf Developers Architecture: all Multi-Arch: foreign Version: 1.5.82 Replaces: debconf-tiny Provides: debconf-2.0 Recommends: apt-utils, debconf-i18n Suggests: debconf-doc, debconf-kde-helper, debconf-utils, libgtk3-perl, libnet-ldap-perl, libterm-readline-gnu-perl, perl, whiptail | dialog Conflicts: debconf-tiny, whiptail-utf8 (<= 0.50.17-13) Conffiles: /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811 Description: Debian configuration management system Debconf is a configuration management system for debian packages. Packages use Debconf to ask questions when they are installed. Package: debconf-i18n Status: install ok installed Priority: important Section: localization Installed-Size: 805 Maintainer: Debconf Developers Architecture: all Source: debconf Version: 1.5.82 Depends: debconf (= 1.5.82), liblocale-gettext-perl, libtext-charwidth-perl, libtext-iconv-perl, libtext-wrapi18n-perl Conflicts: debconf-english Description: full internationalization support for debconf This package provides full internationalization for debconf, including translations into all available languages, support for using translated debconf templates, and support for proper display of multibyte character sets. Package: debian-archive-keyring Status: install ok installed Priority: important Section: misc Installed-Size: 293 Maintainer: Debian Release Team Architecture: all Multi-Arch: foreign Version: 2023.3+deb12u2 Conffiles: /etc/apt/trusted.gpg.d/debian-archive-bookworm-automatic.asc 55eec060916a9d4a0db7560ab4d7bdce /etc/apt/trusted.gpg.d/debian-archive-bookworm-security-automatic.asc bec0a1224f667bcd1e231b874db9bc4f /etc/apt/trusted.gpg.d/debian-archive-bookworm-stable.asc fac2ec9faba2c2d82c70a6e2805c5b79 /etc/apt/trusted.gpg.d/debian-archive-bullseye-automatic.asc 1f30ce1ba8532d523017acb1a69c106a /etc/apt/trusted.gpg.d/debian-archive-bullseye-security-automatic.asc 9fbe7b0d8ebb38e240aeec6b0830ac7b /etc/apt/trusted.gpg.d/debian-archive-bullseye-stable.asc 85a4c0e5c747a38509b33562d4c950be /etc/apt/trusted.gpg.d/debian-archive-trixie-automatic.asc 556202307f6f23e343c1ba12790507be /etc/apt/trusted.gpg.d/debian-archive-trixie-security-automatic.asc f421db9e00d9a98c66c396b2a210f52c /etc/apt/trusted.gpg.d/debian-archive-trixie-stable.asc 91c5c0b4f6878239622087c64866c909 Description: GnuPG archive keys of the Debian archive The Debian project digitally signs its Release files. This package contains the archive keys used for that. Package: debianutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 243 Maintainer: Clint Adams Architecture: amd64 Multi-Arch: foreign Version: 5.7-0.5~deb12u1 Pre-Depends: libc6 (>= 2.34) Breaks: ifupdown (<< 0.8.36+nmu1), printer-driver-pnm2ppa (<< 1.13-12), x11-common (<< 1:7.7+23~) Description: Miscellaneous utilities specific to Debian This package provides a number of small utilities which are used primarily by the installation scripts of Debian packages, although you may use them directly. . The specific utilities included are: add-shell installkernel ischroot remove-shell run-parts savelog update-shells which Package: debsuryorg-archive-keyring Status: install ok config-files Priority: optional Section: misc Installed-Size: 37 Maintainer: Ondřej Surý Architecture: all Version: 2025.03.13 Config-Version: 2025.03.13 Depends: debconf (>= 0.5) | debconf-2.0 Conffiles: /etc/apt/trusted.gpg.d/debsuryorg-archive.gpg b2aae317f4fe5e70c5e7ba4da5ca2deb Description: GnuPG archive keys of the deb.sury.org archives This keys digitally signs the Release files for its repositories hosted on deb.sury.org. This package contains the archive keys required for APT to verify the validity of the downloaded Release files. Package: diffutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 1598 Maintainer: Santiago Vila Architecture: amd64 Version: 1:3.8-4 Replaces: diff Pre-Depends: libc6 (>= 2.34) Suggests: diffutils-doc, wdiff Description: File comparison utilities The diffutils package provides the diff, diff3, sdiff, and cmp programs. . `diff' shows differences between two files, or each corresponding file in two directories. `cmp' shows the offsets and line numbers where two files differ. `cmp' can also show all the characters that differ between the two files, side by side. `diff3' shows differences among three files. `sdiff' merges two files interactively. . The set of differences produced by `diff' can be used to distribute updates to text files (such as program source code) to other people. This method is especially useful when the differences are small compared to the complete files. Given `diff' output, the `patch' program can update, or "patch", a copy of the file. Homepage: https://www.gnu.org/software/diffutils/ Package: dirmngr Status: install ok installed Priority: optional Section: utils Installed-Size: 1329 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.40-1.1+deb12u2 Replaces: gnupg2 (<< 2.1.10-2) Depends: adduser, gpgconf (= 2.2.40-1.1+deb12u2), lsb-base (>= 3.2-13), init-system-helpers (>= 1.52), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgnutls30 (>= 3.7.5), libgpg-error0 (>= 1.42), libksba8 (>= 1.3.5), libldap-2.5-0 (>= 2.5.4), libnpth0 (>= 0.90) Recommends: gnupg (= 2.2.40-1.1+deb12u2) Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, tor Breaks: gnupg2 (<< 2.1.10-2) Enhances: gpg, gpgsm, squid Description: GNU privacy guard - network certificate management service dirmngr is a server for managing and downloading OpenPGP and X.509 certificates, as well as updates and status signals related to those certificates. For OpenPGP, this means pulling from the public HKP/HKPS keyservers, or from LDAP servers. For X.509 this includes Certificate Revocation Lists (CRLs) and Online Certificate Status Protocol updates (OCSP). It is capable of using Tor for network access. . dirmngr is used for network access by gpg, gpgsm, and dirmngr-client, among other tools. Unless this package is installed, the parts of the GnuPG suite that try to interact with the network will fail. Homepage: https://www.gnupg.org/ Package: distro-info-data Status: install ok installed Priority: optional Section: devel Installed-Size: 19 Maintainer: Benjamin Drung Architecture: all Multi-Arch: foreign Version: 0.58+deb12u7 Breaks: distro-info (<< 1.0~) Description: information about the distributions' releases (data files) Information about all releases of Debian and Ubuntu. The distro-info script will give you the codename for e.g. the latest stable release of your distribution. To get information about a specific distribution there are the debian-distro-info and the ubuntu-distro-info scripts. . This package contains the data files. Package: dmeventd Status: install ok installed Priority: optional Section: admin Installed-Size: 224 Maintainer: Debian LVM Team Architecture: amd64 Source: lvm2 (2.03.16-2) Version: 2:1.02.185-2 Depends: libc6 (>= 2.34), libdevmapper-event1.02.1 (>= 2:1.02.110), libdevmapper1.02.1 (>= 2:1.02.110), liblvm2cmd2.03 (>= 2.03.16) Description: Linux Kernel Device Mapper event daemon The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but software raid, and other drivers that create "virtual" block devices. . This package contains a daemon to monitor events of devmapper devices. Homepage: https://sourceware.org/lvm2/ Package: dmidecode Status: install ok installed Priority: important Section: utils Installed-Size: 221 Maintainer: Jörg Frings-Fürst Architecture: amd64 Multi-Arch: foreign Version: 3.4-1 Depends: libc6 (>= 2.33) Description: SMBIOS/DMI table decoder Dmidecode reports information about the system's hardware as described in the system BIOS according to the SMBIOS/DMI standard. . This information typically includes system manufacturer, model name, serial number, BIOS version, asset tag as well as a lot of other details of varying level of interest and reliability depending on the manufacturer. This will often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI, ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel, USB). . Beware that DMI data have proven to be too unreliable to be blindly trusted. Dmidecode does not scan the hardware, it only reports what the BIOS told it to. Homepage: https://nongnu.org/dmidecode/ Package: dmsetup Status: install ok installed Priority: optional Section: admin Installed-Size: 246 Maintainer: Debian LVM Team Architecture: amd64 Multi-Arch: foreign Source: lvm2 (2.03.16-2) Version: 2:1.02.185-2 Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.181) Description: Linux Kernel Device Mapper userspace library The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but software raid, and other drivers that create "virtual" block devices. . This package contains a utility for modifying device mappings. Homepage: https://sourceware.org/lvm2/ Package: dns-root-data Status: install ok installed Priority: optional Section: misc Installed-Size: 19 Maintainer: dns-root-data packagers Architecture: all Multi-Arch: foreign Version: 2024071801~deb12u1 Description: DNS root hints and DNSSEC trust anchor This package contains various root zone related data as published by IANA to be used by various DNS software as a common source of DNS root zone data, namely: . * Root Hints (root.hints) * Root Trust Anchors (root.key, root.ds) Homepage: https://data.iana.org/root-anchors/ Package: dosfstools Status: install ok installed Priority: optional Section: otherosfs Installed-Size: 315 Maintainer: Andreas Bombe Architecture: amd64 Version: 4.2-1 Depends: libc6 (>= 2.14) Description: utilities for making and checking MS-DOS FAT filesystems The dosfstools package includes the mkfs.fat and fsck.fat utilities, which respectively make and check MS-DOS FAT filesystems. Homepage: https://github.com/dosfstools/dosfstools Package: dovecot-core Status: install ok installed Priority: optional Section: mail Installed-Size: 11511 Maintainer: Dovecot Maintainers Architecture: amd64 Source: dovecot Version: 1:2.3.19.1+dfsg1-2.1+deb12u6 Replaces: dovecot-common (<< 1:2.0.14-2~), mailavenger (<< 0.8.1-4) Provides: dovecot-abi-2.3.abiv19, dovecot-common Depends: adduser, libpam-runtime, lsb-base, openssl, ssl-cert, ucf, libapparmor1 (>= 2.7.0~beta1+bzr1772), libbz2-1.0, libc6 (>= 2.36), libcap2 (>= 1:2.10), libcrypt1 (>= 1:4.1.0), libexttextcat-2.0-0 (>= 3.3.0), libicu72 (>= 72.1~rc-1~), liblua5.4-0 (>= 5.4.4), liblz4-1 (>= 0.0~r130), liblzma5 (>= 5.1.1alpha+20120614), libpam0g (>= 0.99.7.1), libsodium23 (>= 1.0.13), libssl3 (>= 3.0.0), libstemmer0d (>= 0+svn527), libsystemd0, libtirpc3 (>= 1.0.2), libunwind8, libwrap0 (>= 7.6-4~), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Pre-Depends: init-system-helpers (>= 1.54~) Suggests: dovecot-gssapi, dovecot-imapd, dovecot-ldap, dovecot-lmtpd, dovecot-lucene, dovecot-managesieved, dovecot-mysql, dovecot-pgsql, dovecot-pop3d, dovecot-sieve, dovecot-solr, dovecot-sqlite, dovecot-submissiond, ntp Breaks: dovecot-common (<< 1:2.0.14-2~), mailavenger (<< 0.8.1-4) Conffiles: /etc/default/dovecot ba5d8764151acf91933da154636216e1 /etc/init.d/dovecot 3af89c8aa0359dc59a9bbda904707a9b /etc/pam.d/dovecot 788128882dc95f31f2f979d700603f19 Description: secure POP3/IMAP server - core files Dovecot is a mail server whose major goals are security and extreme reliability. It tries very hard to handle all error conditions and verify that all data is valid, making it nearly impossible to crash. It supports mbox/Maildir and its own dbox/mdbox formats, and should also be pretty fast, extensible, and portable. . This package contains the Dovecot main server and its command line utility. Homepage: https://dovecot.org/ Package: dovecot-imapd Status: install ok installed Priority: optional Section: mail Installed-Size: 1954 Maintainer: Dovecot Maintainers Architecture: amd64 Source: dovecot Version: 1:2.3.19.1+dfsg1-2.1+deb12u6 Provides: imap-server Depends: dovecot-core (= 1:2.3.19.1+dfsg1-2.1+deb12u6), ucf, libbz2-1.0, libc6 (>= 2.34), liblz4-1 (>= 0.0~r130), liblzma5 (>= 5.1.1alpha+20120614), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Suggests: ufw Conffiles: /etc/ufw/applications.d/dovecot-imapd 8cc92cf8997bb751d436a5521c6d1287 Description: secure POP3/IMAP server - IMAP daemon Dovecot is a mail server whose major goals are security and extreme reliability. It tries very hard to handle all error conditions and verify that all data is valid, making it nearly impossible to crash. It supports mbox/Maildir and its own dbox/mdbox formats, and should also be pretty fast, extensible, and portable. . This package contains the Dovecot IMAP server. Homepage: https://dovecot.org/ Package: dovecot-pop3d Status: install ok installed Priority: optional Section: mail Installed-Size: 1451 Maintainer: Dovecot Maintainers Architecture: amd64 Source: dovecot Version: 1:2.3.19.1+dfsg1-2.1+deb12u6 Provides: pop3-server Depends: dovecot-core (= 1:2.3.19.1+dfsg1-2.1+deb12u6), ucf, libc6 (>= 2.34) Suggests: ufw Conffiles: /etc/ufw/applications.d/dovecot-pop3d d7befb0a91080dcdb6b4e75219ab2d3c Description: secure POP3/IMAP server - POP3 daemon Dovecot is a mail server whose major goals are security and extreme reliability. It tries very hard to handle all error conditions and verify that all data is valid, making it nearly impossible to crash. It supports mbox/Maildir and its own dbox/mdbox formats, and should also be pretty fast, extensible, and portable. . This package contains the Dovecot POP3 server. Homepage: https://dovecot.org/ Package: dovecot-sieve Status: install ok installed Priority: optional Section: mail Installed-Size: 2540 Maintainer: Dovecot Maintainers Architecture: amd64 Source: dovecot Version: 1:2.3.19.1+dfsg1-2.1+deb12u6 Replaces: dovecot-core (<= 1:2.2.13-6), dovecot-imapd (<< 1:2.2.26.0-1~) Depends: dovecot-core (= 1:2.3.19.1+dfsg1-2.1+deb12u6), ucf, libc6 (>= 2.34) Breaks: dovecot-core (<= 1:2.2.13-6), dovecot-imapd (<< 1:2.2.26.0-1~) Description: secure POP3/IMAP server - Sieve filters support Dovecot is a mail server whose major goals are security and extreme reliability. It tries very hard to handle all error conditions and verify that all data is valid, making it nearly impossible to crash. It supports mbox/Maildir and its own dbox/mdbox formats, and should also be pretty fast, extensible, and portable. . This package provides Sieve filters support for Dovecot. Homepage: https://dovecot.org/ Package: dpkg Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 6409 Maintainer: Dpkg Developers Architecture: amd64 Multi-Arch: foreign Version: 1.21.23 Depends: tar (>= 1.28-1) Pre-Depends: libbz2-1.0, libc6 (>= 2.34), liblzma5 (>= 5.4.0), libmd0 (>= 0.0.0), libselinux1 (>= 3.1~), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Suggests: apt, debsig-verify Breaks: libapt-pkg5.0 (<< 1.7~b), lsb-base (<< 10.2019031300) Conffiles: /etc/alternatives/README 7be88b21f7e386c8d5a8790c2461c92b /etc/cron.daily/dpkg 94bb6c1363245e46256908a5d52ba4fb /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b /etc/logrotate.d/alternatives 5fe0af6ce1505fefdc158d9e5dbf6286 /etc/logrotate.d/dpkg 9e25c8505966b5829785f34a548ae11f Description: Debian package management system This package provides the low-level infrastructure for handling the installation and removal of Debian software packages. . For Debian package development tools, install dpkg-dev. Homepage: https://wiki.debian.org/Teams/Dpkg Package: dpkg-dev Status: install ok installed Priority: optional Section: utils Installed-Size: 1728 Maintainer: Dpkg Developers Architecture: all Multi-Arch: foreign Source: dpkg Version: 1.21.23 Depends: perl:any, libdpkg-perl (= 1.21.23), tar (>= 1.28-1), bzip2, xz-utils (>= 5.4.0), patch (>= 2.7), make, binutils Recommends: build-essential, gcc | c-compiler, fakeroot, gnupg | sq | sqop | pgpainless-cli, gpgv | sq | sqop | pgpainless-cli, libalgorithm-merge-perl Suggests: debian-keyring Breaks: debhelper (<< 10.10.1~), libsop-java-java (<< 4.0.7~), pgpainless-cli (<< 1.3.13~), sq (<< 0.25.0~), sqop (<< 0.27.2~) Conffiles: /etc/dpkg/shlibs.default 1a2b9d0a869e2aa885ae3621c557fb95 /etc/dpkg/shlibs.override 84b1e69080569cc5c613a50887af5200 Description: Debian package development tools This package provides the development tools (including dpkg-source) required to unpack, build and upload Debian source packages. . Most Debian source packages will require additional tools to build; for example, most packages need make and the C compiler gcc. Homepage: https://wiki.debian.org/Teams/Dpkg Package: e2fsprogs Status: install ok installed Priority: required Section: admin Installed-Size: 1497 Maintainer: Theodore Y. Ts'o Architecture: amd64 Multi-Arch: foreign Source: e2fsprogs (1.47.0-2) Version: 1.47.0-2+b2 Depends: logsave Pre-Depends: libblkid1 (>= 2.36), libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libext2fs2 (= 1.47.0-2+b2), libss2 (>= 1.38), libuuid1 (>= 2.16) Recommends: e2fsprogs-l10n Suggests: gpart, parted, fuse2fs, e2fsck-static Conffiles: /etc/cron.d/e2scrub_all bc533e09f3b3d96bfe1633ad57eb7026 /etc/e2scrub.conf df38534cc670c70a91cf9b035845d244 /etc/mke2fs.conf 6a2103e33d9e48b5f6f3190045c37561 Description: ext2/ext3/ext4 file system utilities The ext2, ext3 and ext4 file systems are successors of the original ext ("extended") file system. They are the main file system types used for hard disks on Debian and other Linux systems. . This package contains programs for creating, checking, and maintaining ext2/3/4-based file systems. It also includes the "badblocks" program, which can be used to scan for bad blocks on a disk or other storage device. Homepage: http://e2fsprogs.sourceforge.net Important: yes Package: eatmydata Status: install ok installed Priority: optional Section: utils Installed-Size: 25 Maintainer: Mattia Rizzolo Architecture: all Source: libeatmydata Version: 130-2 Depends: libeatmydata1 (>= 130-2) Description: Library and utilities designed to disable fsync and friends This package contains a small LD_PRELOAD library (libeatmydata) and a couple of helper utilities designed to transparently disable fsync and friends (like open(O_SYNC)). This has two side-effects: making software that writes data safely to disk a lot quicker and making this software no longer crash safe. . You will find eatmydata useful if particular software calls fsync(), sync() etc. frequently but the data it stores is not that valuable to you and you may afford losing it in case of system crash. Data-to-disk synchronization calls are typically very slow on modern file systems and their extensive usage might slow down software significantly. It does not make sense to accept such a hit in performance if data being manipulated is not very important. . On the other hand, do not use eatmydata when you care about what software stores or it manipulates important components of your system. The library is called libEAT-MY-DATA for a reason. Homepage: https://www.flamingspork.com/projects/libeatmydata/ Package: efibootmgr Status: install ok installed Priority: optional Section: admin Installed-Size: 87 Maintainer: Debian UEFI Maintainers Architecture: amd64 Multi-Arch: foreign Version: 17-2 Depends: libc6 (>= 2.34), libefiboot1 (>= 37), libefivar1 (>= 37), libpopt0 (>= 1.14) Description: Interact with the EFI Boot Manager This is a Linux user-space application to modify the Intel Extensible Firmware Interface (EFI) Boot Manager configuration. This application can create and destroy boot entries, change the boot order, change the next running boot option, and more. . Additional information about (U)EFI can be found at http://www.uefi.org/. . Note: efibootmgr requires that the kernel module efivars be loaded prior to use. 'modprobe efivars' should do the trick if it does not automatically load. Package: eject Status: install ok installed Priority: optional Section: utils Installed-Size: 132 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: foreign Source: util-linux Version: 2.38.1-5+deb12u3 Depends: libc6 (>= 2.34), libmount1 (>= 2.24.2) Description: ejects CDs and operates CD-Changers under Linux This program will eject CD-ROMs (assuming your drive supports the CDROMEJECT ioctl). It also allows setting the autoeject feature. . On supported ATAPI/IDE multi-disc CD-ROM changers, it allows changing the active disc. . You can also use eject to properly disconnect external mass-storage devices like digital cameras or portable music players. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: ethtool Status: install ok installed Priority: optional Section: net Installed-Size: 668 Maintainer: Debian Kernel Team Architecture: amd64 Version: 1:6.1-1 Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~) Conffiles: /etc/network/if-pre-up.d/ethtool 39693276fe35fccec75f610cb71d3e85 /etc/network/if-up.d/ethtool b0d11ba5983c8c5990bb9933c35a3ec5 Description: display or change Ethernet device settings ethtool can be used to query and change settings such as speed, auto- negotiation and checksum offload on many network devices, especially Ethernet devices. Homepage: https://www.kernel.org/pub/software/network/ethtool/ Package: fail2ban Status: install ok installed Priority: optional Section: net Installed-Size: 2129 Maintainer: Debian Python Team Architecture: all Version: 1.0.2-2 Depends: python3:any Recommends: nftables | iptables, whois, python3-pyinotify, python3-systemd Suggests: mailx, system-log-daemon, monit, sqlite3 Conffiles: /etc/default/fail2ban 66c59a6c990607ec771dbecfa8d9bc8f /etc/fail2ban/action.d/abuseipdb.conf 6de77158aef873b4f3278b922a4718c1 /etc/fail2ban/action.d/apf.conf ff489332ad817434ff9f924deed6b1fc /etc/fail2ban/action.d/apprise.conf 8a59ac41cb6db7521bf06c4a28161fd9 /etc/fail2ban/action.d/blocklist_de.conf 444ac9d25936928883470eb138b2aa62 /etc/fail2ban/action.d/bsd-ipfw.conf c99b2da81311c839423c17bae185e828 /etc/fail2ban/action.d/cloudflare-token.conf d0324f870fde7b3d38894e9e7aa0c729 /etc/fail2ban/action.d/cloudflare.conf 8ca752e8183bfeb7b50439cb838d9ef0 /etc/fail2ban/action.d/complain.conf dc9fc26b61211a5feeca1ecd6593a80b /etc/fail2ban/action.d/dshield.conf 4977ae209a571ea51000c62136222e29 /etc/fail2ban/action.d/dummy.conf 7ccd65d6d122d146afd070d4b8d3fe13 /etc/fail2ban/action.d/firewallcmd-allports.conf cd29d18a85b730acb6243f2c9c682564 /etc/fail2ban/action.d/firewallcmd-common.conf c151aca3c29ae6b05abaefa109aca137 /etc/fail2ban/action.d/firewallcmd-ipset.conf dc2001254336da8f4361832e48b89a26 /etc/fail2ban/action.d/firewallcmd-multiport.conf 3073384d28e61285d100d844b23732f2 /etc/fail2ban/action.d/firewallcmd-new.conf df128e6fe60c02dbbb923b0d03d4b9b0 /etc/fail2ban/action.d/firewallcmd-rich-logging.conf 8b03ce848766a4f069886e5ee31ecbe7 /etc/fail2ban/action.d/firewallcmd-rich-rules.conf a292029b68d9dc71f7d8180eb04aab9c /etc/fail2ban/action.d/helpers-common.conf d1957c2ea8ad3f3a7bb029781c469eea /etc/fail2ban/action.d/hostsdeny.conf 69ed0f6e2bd952c41a38d1158d86d348 /etc/fail2ban/action.d/ipfilter.conf a0a9cead3b3d53d2fa6b7ff57b36c9ac /etc/fail2ban/action.d/ipfw.conf e7a0d606e6bebb32b502204d33b6acb3 /etc/fail2ban/action.d/iptables-allports.conf c24252cd1e408a9b824beb0dd1770253 /etc/fail2ban/action.d/iptables-ipset-proto4.conf dbc395467d9930d047ffb89b5fb20ed6 /etc/fail2ban/action.d/iptables-ipset-proto6-allports.conf 4bc2553f08fdd9fd96ff946ede0243f6 /etc/fail2ban/action.d/iptables-ipset-proto6.conf 25340aed69f3390e25938d432e879738 /etc/fail2ban/action.d/iptables-ipset.conf e3d7b1b23b48919045c7d44e838f7a61 /etc/fail2ban/action.d/iptables-multiport-log.conf 15a57a32e8d171b4ed36e4871425d899 /etc/fail2ban/action.d/iptables-multiport.conf 0d5435062f6ffb2c3c70ebb2e8ff89a9 /etc/fail2ban/action.d/iptables-new.conf 891fb96f61fcdad1a0a9c3b6a53e3b54 /etc/fail2ban/action.d/iptables-xt_recent-echo.conf 8b7ae4a68949128f8715d322e880888d /etc/fail2ban/action.d/iptables.conf cb4722b8663d168b43b41089928f66e9 /etc/fail2ban/action.d/ipthreat.conf 1431bac75b3e1bdf01250aa24dc99489 /etc/fail2ban/action.d/mail-buffered.conf dcc6469bc7a89b724f85dc9833c1a177 /etc/fail2ban/action.d/mail-whois-common.conf 59648a28f1c3e91fd5aceeb4e94eb625 /etc/fail2ban/action.d/mail-whois-lines.conf 485526275886884303ed78c487ff6dc4 /etc/fail2ban/action.d/mail-whois.conf 79a789f89810509a19d1f9971e8bef8b /etc/fail2ban/action.d/mail.conf 0454b60c46c25f86137fb217a7b0b581 /etc/fail2ban/action.d/mynetwatchman.conf f8a1122fd899abe1116b7cc087e6c04a /etc/fail2ban/action.d/netscaler.conf 1c782bbb8f755eb011622bf0092fc22a /etc/fail2ban/action.d/nftables-allports.conf c33bbf43efdb06cf65443b7f8fccc494 /etc/fail2ban/action.d/nftables-multiport.conf 2ead09f300d009bd68b20a1b36033206 /etc/fail2ban/action.d/nftables.conf 029a2b05f919060794cbf2af3fd1a28d /etc/fail2ban/action.d/nginx-block-map.conf d4b31af42a4cc9dc359517899e0b061e /etc/fail2ban/action.d/npf.conf f43b7cdab630da59256f5b345ba32f03 /etc/fail2ban/action.d/nsupdate.conf c802245838c79120cee7bff4f9cea4b3 /etc/fail2ban/action.d/osx-afctl.conf 94b91b8678abdc53828e51f67a10d1a4 /etc/fail2ban/action.d/osx-ipfw.conf d66e4088a7fac069d6af6aaf99dae2b4 /etc/fail2ban/action.d/pf.conf d1fa96edf3e5e07bc6ffa396cb8474aa /etc/fail2ban/action.d/route.conf 435129bb799264371fa14896444d756e /etc/fail2ban/action.d/sendmail-buffered.conf 80b1125dd43790e59b3cd337197e8395 /etc/fail2ban/action.d/sendmail-common.conf ff6c98c7d50ac417b5f7b850e2b25075 /etc/fail2ban/action.d/sendmail-geoip-lines.conf d6eba5a6020da3326de48efdec608a20 /etc/fail2ban/action.d/sendmail-whois-ipjailmatches.conf ec487366cde6963e09f67d3f9a23840d /etc/fail2ban/action.d/sendmail-whois-ipmatches.conf ae565c368bd26a51f3da8134b3830ef8 /etc/fail2ban/action.d/sendmail-whois-lines.conf 377adfd550d876d93b086b04104fb549 /etc/fail2ban/action.d/sendmail-whois-matches.conf cab221329a27f5c8dd82ce7f064fe48f /etc/fail2ban/action.d/sendmail-whois.conf 8fedeefaf04d181db3fbd6f271542b57 /etc/fail2ban/action.d/sendmail.conf 5e94ff0dc46cc6c37e7fe10d107cfdbb /etc/fail2ban/action.d/shorewall-ipset-proto6.conf 8d710fb2ef9cab0993956c5852409b72 /etc/fail2ban/action.d/shorewall.conf 1d4ab5b99d18e11384d5506f13ea445f /etc/fail2ban/action.d/smtp.py b4d23d3eb0cf59909b1ad0bf831fcaff /etc/fail2ban/action.d/symbiosis-blacklist-allports.conf b115a5562adf6e2c76ad13a9aaa00a90 /etc/fail2ban/action.d/ufw.conf 268387a303d69c814801608921c425e4 /etc/fail2ban/action.d/xarf-login-attack.conf d9b723a140f9356c7e1bba5dee76516f /etc/fail2ban/fail2ban.conf d69808e46c0fde98cb6994fc1807b34d /etc/fail2ban/filter.d/3proxy.conf 285af6d118ea5345dfb1af26d010f959 /etc/fail2ban/filter.d/apache-auth.conf a275d59c663823bfa6710a0c6b0c1003 /etc/fail2ban/filter.d/apache-badbots.conf 58eddea83654cffdb7307ecceb6d3a01 /etc/fail2ban/filter.d/apache-botsearch.conf bd2f44554a3aaa679b10368ac2ad38fc /etc/fail2ban/filter.d/apache-common.conf 87411bcffc9e7f0301a1651f91221788 /etc/fail2ban/filter.d/apache-fakegooglebot.conf 4a2e2570425468f2865b7ba4625c4f19 /etc/fail2ban/filter.d/apache-modsecurity.conf 9ef1dd9655938c9e4cb37dbfd279d07f /etc/fail2ban/filter.d/apache-nohome.conf 787fae6f13398d03ba5aada47c0b38ec /etc/fail2ban/filter.d/apache-noscript.conf 817a490ac92fe807c49622862a966297 /etc/fail2ban/filter.d/apache-overflows.conf bebdf7a6dffa89a2ed72ebbbe038f24d /etc/fail2ban/filter.d/apache-pass.conf 9deffde7a16b5e7142346d9036744919 /etc/fail2ban/filter.d/apache-shellshock.conf 98aa308017f01860be6b902415b4dd5d /etc/fail2ban/filter.d/assp.conf cb9d20e55823cff862c7668e2c5831de /etc/fail2ban/filter.d/asterisk.conf 4d5211ab617c9e242902f7ff2b27655c /etc/fail2ban/filter.d/bitwarden.conf 201427cd10aed27592961a55d25fd04f /etc/fail2ban/filter.d/botsearch-common.conf b546f05992f9b7c1db26b9f55c6f2c32 /etc/fail2ban/filter.d/centreon.conf 289377d5904d0e9eae6f4d56b789a2b3 /etc/fail2ban/filter.d/common.conf dc920231e137cf3df35a0ac68ddd97e1 /etc/fail2ban/filter.d/counter-strike.conf 6d9714efbfdcaa4e0f03de96397d05b1 /etc/fail2ban/filter.d/courier-auth.conf 1b943215d828916934a48da6a9cd9371 /etc/fail2ban/filter.d/courier-smtp.conf 925056ec18ab654d3906538ad3eac17c /etc/fail2ban/filter.d/cyrus-imap.conf 738d29a562415f920b1dca0fb78f6c7c /etc/fail2ban/filter.d/directadmin.conf 834a2111b12b4562b5ccf8b7a31fa1f7 /etc/fail2ban/filter.d/domino-smtp.conf eb0578ff73a1bf499c333cc103381816 /etc/fail2ban/filter.d/dovecot.conf be78d2a9282954dacb60a0b05edba148 /etc/fail2ban/filter.d/dropbear.conf e0c30a472e752b9e848123ac918d4aff /etc/fail2ban/filter.d/drupal-auth.conf bae517e107e7326eb2cf5f3510260dab /etc/fail2ban/filter.d/ejabberd-auth.conf 7c27adb260f232d7d1913db9ded13aa3 /etc/fail2ban/filter.d/exim-common.conf fc7208a8a6dc5ae884f1d12f1c4eed88 /etc/fail2ban/filter.d/exim-spam.conf 1632006b4443aa764ca5b04bfbfa1e18 /etc/fail2ban/filter.d/exim.conf f3cc931a64589b951d5d50c2f0e4260e /etc/fail2ban/filter.d/freeswitch.conf c21930674fd26658abf7a574414a9e6f /etc/fail2ban/filter.d/froxlor-auth.conf 016e28f7d6ef65214b2c55f6fabbecbf /etc/fail2ban/filter.d/gitlab.conf 0fadcd1acf567d68e852e8f7099e6f3d /etc/fail2ban/filter.d/grafana.conf ac30cf9bb1866225b4d5f07f9e572ed0 /etc/fail2ban/filter.d/groupoffice.conf b7cbbcf7013c493834efa3ce81216f7c /etc/fail2ban/filter.d/gssftpd.conf 468f015e1687e621e351ba8e13135f27 /etc/fail2ban/filter.d/guacamole.conf bfe68ff09e924ace4ac64a050674b383 /etc/fail2ban/filter.d/haproxy-http-auth.conf e1868882271e38006b94f6be8de8c1c0 /etc/fail2ban/filter.d/horde.conf 0bcee5c60b5e0714cdbe8d12c17d03cf /etc/fail2ban/filter.d/ignorecommands/apache-fakegooglebot 0abb04f22e21a9b8d569e69605209b9c /etc/fail2ban/filter.d/kerio.conf f8531dca3006ddcc5145ca5353a92fcd /etc/fail2ban/filter.d/lighttpd-auth.conf 793700e5abe99253b6516d873e89179e /etc/fail2ban/filter.d/mongodb-auth.conf 68aebabbab4b51573230acf7975a0cbc /etc/fail2ban/filter.d/monit.conf 7d5719a524d02682e4c118aada845882 /etc/fail2ban/filter.d/monitorix.conf 8d29867c4c6d5affa5b22a1769072828 /etc/fail2ban/filter.d/mssql-auth.conf e421f1e26f9f2889ebf6f265855d99e5 /etc/fail2ban/filter.d/murmur.conf a66bd6390be2e81355b6d3c7a76c00aa /etc/fail2ban/filter.d/mysqld-auth.conf 67cabde0313ca3bdcc0965e34140595f /etc/fail2ban/filter.d/nagios.conf 2f38bc0aee9c787baceb1af97ab98867 /etc/fail2ban/filter.d/named-refused.conf d63435a371eaf87562e21279d814db49 /etc/fail2ban/filter.d/nginx-bad-request.conf 2eb2f46eb09125ddb667628dea2606e8 /etc/fail2ban/filter.d/nginx-botsearch.conf 25592d31f5a417d7e8cb4a4a41fc079a /etc/fail2ban/filter.d/nginx-http-auth.conf a6be4279cdba2bbc1e7ceaee76c4c50e /etc/fail2ban/filter.d/nginx-limit-req.conf d7d780d0d0e5e77a5b23afd121fbdb5b /etc/fail2ban/filter.d/nsd.conf 6d47def897a25346178174300bb575c4 /etc/fail2ban/filter.d/openhab.conf 6b6aac610352fc1ec1b2e3ecd13cd1f7 /etc/fail2ban/filter.d/openwebmail.conf 6a27aa31db87833bd5456df7e01ff173 /etc/fail2ban/filter.d/oracleims.conf 6ce2854b4c90888de9562bc44adbdff7 /etc/fail2ban/filter.d/pam-generic.conf 73052198258e96bdd24ab830d7730366 /etc/fail2ban/filter.d/perdition.conf 0cc5ea440cf9f71777e01e011a27490f /etc/fail2ban/filter.d/php-url-fopen.conf f877b5920afc317023cb339f1979a64c /etc/fail2ban/filter.d/phpmyadmin-syslog.conf 5ac921d41c79916644ef00f709b1742e /etc/fail2ban/filter.d/portsentry.conf 7f642f7fe2b329e69db81023baccbb7f /etc/fail2ban/filter.d/postfix.conf eb5afba0272f31eb80aa09b6bf22c4ce /etc/fail2ban/filter.d/proftpd.conf 40f14bbcf14654ff52f4c0b7b4f3a19c /etc/fail2ban/filter.d/pure-ftpd.conf b0770ea94f0f3c41a9a75a7b8a4459a3 /etc/fail2ban/filter.d/qmail.conf fb1af4aca05230c58e61dbc8c31e458d /etc/fail2ban/filter.d/recidive.conf 190ab18db96f9093de2210cc52d2a41d /etc/fail2ban/filter.d/roundcube-auth.conf 466e17c074d6578dd7fad7b8c712ec96 /etc/fail2ban/filter.d/scanlogd.conf df062c3a1fe7aeba8f45d7a1ac1d2896 /etc/fail2ban/filter.d/screensharingd.conf 7f9c1fe844dabf6ff53cb8425557f7cb /etc/fail2ban/filter.d/selinux-common.conf f006a8a410652b953e62e4c2b7c9fd90 /etc/fail2ban/filter.d/selinux-ssh.conf a86b87975e0fd4b09a185b724bc6063d /etc/fail2ban/filter.d/sendmail-auth.conf a6f19e0257c8ee5b46fabf293b1bdb2c /etc/fail2ban/filter.d/sendmail-reject.conf 97b7c7df1b2667e0b6f66df0c749bea9 /etc/fail2ban/filter.d/sieve.conf a8a6805d10f038fd0e1c6f2db2ca7fd5 /etc/fail2ban/filter.d/slapd.conf 85398477ff48b6d9e3b9269aedb95897 /etc/fail2ban/filter.d/softethervpn.conf 8225375dba20c27db3d934dddececad9 /etc/fail2ban/filter.d/sogo-auth.conf 3768d14930758b94a24acee5b6ffd648 /etc/fail2ban/filter.d/solid-pop3d.conf 59c995616b30851d11e85e5cd6e95560 /etc/fail2ban/filter.d/squid.conf 875aa604802ae7f7bdb64de61320cd66 /etc/fail2ban/filter.d/squirrelmail.conf a9938cce23d5a410c8311db514cca2fb /etc/fail2ban/filter.d/sshd.conf 32dc68cfa862e945dc0f10eb065de70b /etc/fail2ban/filter.d/stunnel.conf 0bca290a15f504a8fc7d265768919d53 /etc/fail2ban/filter.d/suhosin.conf f5d0fbb7951c89478f5136d4ea0da228 /etc/fail2ban/filter.d/tine20.conf f625d4a177c7e900e5d5561b5f12b4be /etc/fail2ban/filter.d/traefik-auth.conf 51e6bed25c5fc73f1c3c3ec29b89bd49 /etc/fail2ban/filter.d/uwimap-auth.conf f8f8fb6ed7216c55e5843c590ede5abf /etc/fail2ban/filter.d/vsftpd.conf b5251ece30d8137d6e574eb74df2458d /etc/fail2ban/filter.d/webmin-auth.conf 1ddf0787de3fdf6d5452c56b0f047c19 /etc/fail2ban/filter.d/wuftpd.conf fbf0107c53f138e8c5ce18f0e9b08b4c /etc/fail2ban/filter.d/xinetd-fail.conf 189f8c5f2b9a144e976c5e4b5164fbe1 /etc/fail2ban/filter.d/znc-adminlog.conf 0588e29e97cf1f9dbe68adb50c73f859 /etc/fail2ban/filter.d/zoneminder.conf 70f7fde5c01f2e770fc174708fd5c266 /etc/fail2ban/jail.conf fe889b256ba47275622e00d18f56af4c /etc/fail2ban/jail.d/defaults-debian.conf 55ef21bbd8af425ad41776fa2cd6b8c7 /etc/fail2ban/paths-arch.conf 054307da19e77a024d193187a72a0dab /etc/fail2ban/paths-common.conf cbfb4d0adf4a8c28ef5653951998045d /etc/fail2ban/paths-debian.conf ee4e402a7e534dcd615c1c94209e726f /etc/fail2ban/paths-opensuse.conf 277aba07de31fb353a56a88f18eb9c44 /etc/init.d/fail2ban c0df5d318bb21a45d38472113dea9d2e /etc/logrotate.d/fail2ban 5f2f5cd2320405d6add2240c0a65a930 /etc/monit/monitrc.d/fail2ban 2458d0ccd1a0e2a43beb99d328047cb6 Description: ban hosts that cause multiple authentication errors Fail2ban monitors log files (e.g. /var/log/auth.log, /var/log/apache/access.log) and temporarily or persistently bans failure-prone addresses by updating existing firewall rules. Fail2ban allows easy specification of different actions to be taken such as to ban an IP using iptables or hostsdeny rules, or simply to send a notification email. . By default, it comes with filter expressions for various services (sshd, Apache, proftpd, sasl, etc.) but configuration can be easily extended for monitoring any other text file. All filters and actions are given in the config files, thus fail2ban can be adopted to be used with a variety of files and firewalls. Following recommends are listed: . - iptables/nftables -- default installation uses iptables for banning. nftables is also supported. You most probably need it - whois -- used by a number of *mail-whois* actions to send notification emails with whois information about attacker hosts. Unless you will use those you don't need whois - python3-pyinotify -- unless you monitor services logs via systemd, you need pyinotify for efficient monitoring for log files changes Homepage: https://www.fail2ban.org Package: fbterm Status: install ok installed Priority: optional Section: utils Installed-Size: 144 Maintainer: Nobuhiro Iwamatsu Architecture: amd64 Version: 1.7-5 Depends: libc6 (>= 2.15), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libstdc++6 (>= 5), libx86-1 (>= 1.1+ds1) Description: fast framebuffer based terminal emulator for Linux FbTerm is a fast terminal emulator for Linux with frame buffer device. . Features include: * mostly as fast as terminal of Linux kernel while accelerated scrolling is enabled on framebuffer device * select font with fontconfig and draw text with freetype2, same as Qt/Gtk+ based GUI apps * dynamicly create/destroy up to 10 windows initially running default shell * record scrollback history for every window * auto-detect current locale and convert text encoding, support double width scripts like Chinese, Japanese etc * switch between configurable additional text encoding with hot keys on the fly * copy/past selected text between windows with mouse when gpm server is running Homepage: https://code.google.com/archive/p/fbterm/ Package: fcgiwrap Status: install ok installed Priority: optional Section: web Installed-Size: 66 Maintainer: Debian fcgiwrap Maintainers Architecture: amd64 Version: 1.1.0-14+deb12u1 Depends: lsb-base (>= 3.0-6), systemd | spawn-fcgi (>= 1.6.1), libc6 (>= 2.34), libfcgi0ldbl (>= 2.4.2), libsystemd0 Pre-Depends: init-system-helpers (>= 1.54~) Enhances: nginx Conffiles: /etc/init.d/fcgiwrap 9cf7b49367320b03d873114846252969 Description: simple server to run CGI applications over FastCGI fcgiwrap is a simple server for running CGI applications over FastCGI. Its goal is to provide clean CGI support to the nginx webserver, although can be used with others. . fcgiwrap is lightweight and has no configuration, making it possible to use the same pool to run different sites. Homepage: https://github.com/gnosek/fcgiwrap Package: fdisk Status: install ok installed Priority: important Section: utils Installed-Size: 479 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: foreign Source: util-linux Version: 2.38.1-5+deb12u3 Depends: libc6 (>= 2.34), libfdisk1 (>= 2.38), libmount1 (>= 2.24.2), libncursesw6 (>= 6), libreadline8 (>= 6.0), libsmartcols1 (>= 2.28~rc1), libtinfo6 (>= 6) Recommends: sensible-utils Description: collection of partitioning utilities This package contains the classic fdisk, sfdisk and cfdisk partitioning utilities from the util-linux suite. . The utilities included in this package allow you to partition your hard disk. The utilities supports both modern and legacy partition tables (eg. GPT, MBR, etc). . The fdisk utility is the classical text-mode utility. The cfdisk utilitity gives a more userfriendly curses based interface. The sfdisk utility is mostly for automation and scripting uses. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: ffmpeg Status: install ok installed Priority: optional Section: video Installed-Size: 2388 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: foreign Version: 7:5.1.9-0+deb12u1 Depends: libavcodec59 (>= 7:5.0), libavdevice59 (>= 7:5.0), libavfilter8 (>= 7:5.1), libavformat59 (>= 7:5.1), libavutil57 (>= 7:5.1), libc6 (>= 2.35), libpostproc56 (>= 7:5.0), libsdl2-2.0-0 (>= 2.0.12), libswresample4 (>= 7:5.1), libswscale6 (>= 7:5.0) Suggests: ffmpeg-doc Description: Tools for transcoding, streaming and playing of multimedia files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This package contains: * ffmpeg: a command line tool to convert multimedia files between formats * ffplay: a simple media player based on SDL and the FFmpeg libraries * ffprobe: a simple multimedia stream analyzer * qt-faststart: a utility to rearrange Quicktime files Homepage: https://ffmpeg.org/ Package: file Status: install ok installed Priority: standard Section: utils Installed-Size: 79 Maintainer: Christoph Biedl Architecture: amd64 Multi-Arch: foreign Version: 1:5.44-3 Depends: libc6 (>= 2.34), libmagic1 (= 1:5.44-3) Breaks: debhelper (<< 12.2~) Description: Recognize the type of data in a file using "magic" numbers The file command is "a file type guesser", a command-line tool that tells you in words what kind of data a file contains. . This package contains the file program itself. Homepage: https://www.darwinsys.com/file/ Package: findutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 1746 Maintainer: Andreas Metzler Architecture: amd64 Multi-Arch: foreign Version: 4.9.0-4 Pre-Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~) Breaks: binstats (<< 1.08-8.1), guilt (<< 0.36-0.2), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), switchconf (<< 0.0.9-2.1) Description: utilities for finding files--find, xargs GNU findutils provides utilities to find files meeting specified criteria and perform various actions on the files which are found. This package contains 'find' and 'xargs'; however, 'locate' has been split off into a separate package. Homepage: https://savannah.gnu.org/projects/findutils/ Package: fontconfig Status: install ok installed Priority: optional Section: fonts Installed-Size: 617 Maintainer: Debian freedesktop.org maintainers Architecture: amd64 Multi-Arch: foreign Version: 2.14.1-4 Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.2.1), fontconfig-config Description: generic font configuration library - support binaries Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . Fontconfig is not a rasterization library, nor does it impose a particular rasterization library on the application. The X-specific library 'Xft' uses fontconfig along with freetype to specify and rasterize fonts. . This package contains a program to maintain the fontconfig cache (fc-cache), a sample program to list installed fonts (fc-list), a program to test the matching rules (fc-match) and a program to dump the binary cache files in string form (fc-cat). It no longer makes fonts managed by defoma available to fontconfig applications. Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/ Package: fontconfig-config Status: install ok installed Priority: optional Section: fonts Installed-Size: 527 Maintainer: Debian freedesktop.org maintainers Architecture: amd64 Multi-Arch: foreign Source: fontconfig Version: 2.14.1-4 Depends: debconf (>= 0.5) | debconf-2.0, fonts-dejavu-core | ttf-bitstream-vera | fonts-liberation | fonts-liberation2 | fonts-croscore | fonts-freefont-otf | fonts-freefont-ttf | fonts-urw-base35 | fonts-texgyre Breaks: libfontconfig1 (<< 2.13.0) Conffiles: /etc/fonts/conf.d/README ad6182d0b838d9d8f39219a37b88b24d /etc/fonts/fonts.conf 9632eb1c8b4d81e0e300cd733a4beefe Description: generic font configuration library - configuration Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . This package contains the configuration files and scripts for fontconfig. Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/ Package: fonts-dejavu-core Status: install ok installed Priority: optional Section: fonts Installed-Size: 2960 Maintainer: Debian Fonts Task Force Architecture: all Multi-Arch: foreign Source: fonts-dejavu Version: 2.37-6 Conffiles: /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d /etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad /etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c /etc/fonts/conf.avail/57-dejavu-sans-mono.conf b9a76edd2aeb35cd1095e378963e2cdd /etc/fonts/conf.avail/57-dejavu-sans.conf 2156c2353cfcc81f33150cf889193c28 /etc/fonts/conf.avail/57-dejavu-serif.conf 2604487cb2eee1bdb7010ea716faf408 /etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc /etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205 /etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb Description: Vera font family derivate with additional characters DejaVu provides an expanded version of the Vera font family aiming for quality and broader Unicode coverage while retaining the original Vera style. DejaVu currently works towards conformance with the Multilingual European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu fonts provide serif, sans and monospaced variants. . This package only contains the sans, sans-bold, serif, serif-bold, mono and mono-bold variants. For additional variants, see the fonts-dejavu-extra package. . DejaVu fonts are intended for use on low-resolution devices (mainly computer screens) but can be used in printing as well. Homepage: https://dejavu-fonts.github.io/ Package: fonts-liberation2 Status: install ok installed Priority: optional Section: fonts Installed-Size: 4290 Maintainer: Debian Fonts Task Force Architecture: all Multi-Arch: foreign Version: 2.1.5-1 Description: Fonts with the same metrics as Times, Arial and Courier (v2) A set of serif, sans-serif and monospaced fonts from Red Hat with exactly the same metrics as the (non-free) Microsoft Times, Arial and Courier fonts, which implies those fonts can serve as a drop-in replacement. The font family is named Liberation. Homepage: https://github.com/liberationfonts Package: g++ Status: install ok installed Priority: optional Section: devel Installed-Size: 14 Maintainer: Debian GCC Maintainers Architecture: amd64 Source: gcc-defaults (1.203) Version: 4:12.2.0-3 Provides: c++-compiler, g++-x86-64-linux-gnu (= 4:12.2.0-3) Depends: cpp (= 4:12.2.0-3), gcc (= 4:12.2.0-3), g++-12 (>= 12.2.0-1~), gcc-12 (>= 12.2.0-1~) Suggests: g++-multilib Description: GNU C++ compiler This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This is a dependency package providing the default GNU C++ compiler. Package: g++-12 Status: install ok installed Priority: optional Section: devel Installed-Size: 36161 Maintainer: Debian GCC Maintainers Architecture: amd64 Source: gcc-12 Version: 12.2.0-14+deb12u1 Provides: c++-compiler, c++abi2-dev Depends: gcc-12-base (= 12.2.0-14+deb12u1), gcc-12 (= 12.2.0-14+deb12u1), libstdc++-12-dev (= 12.2.0-14+deb12u1), libc6 (>= 2.36), libgmp10 (>= 2:6.2.1+dfsg1), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Suggests: g++-12-multilib, gcc-12-doc (>= 12) Description: GNU C++ compiler This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. Homepage: http://gcc.gnu.org/ Package: gcc Status: install ok installed Priority: optional Section: devel Installed-Size: 47 Maintainer: Debian GCC Maintainers Architecture: amd64 Source: gcc-defaults (1.203) Version: 4:12.2.0-3 Provides: c-compiler, gcc-x86-64-linux-gnu (= 4:12.2.0-3) Depends: cpp (= 4:12.2.0-3), gcc-12 (>= 12.2.0-1~) Recommends: libc6-dev | libc-dev Suggests: gcc-multilib, make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb, gcc-doc Conflicts: gcc-doc (<< 1:2.95.3) Description: GNU C compiler This is the GNU C compiler, a fairly portable optimizing compiler for C. . This is a dependency package providing the default GNU C compiler. Package: gcc-12 Status: install ok installed Priority: optional Section: devel Installed-Size: 68236 Maintainer: Debian GCC Maintainers Architecture: amd64 Version: 12.2.0-14+deb12u1 Replaces: cpp-12 (<< 7.1.1-8) Provides: c-compiler Depends: cpp-12 (= 12.2.0-14+deb12u1), gcc-12-base (= 12.2.0-14+deb12u1), libcc1-0 (>= 12.2.0-14+deb12u1), binutils (>= 2.40), libgcc-12-dev (= 12.2.0-14+deb12u1), libc6 (>= 2.36), libgcc-s1 (>= 3.0), libgmp10 (>= 2:6.2.1+dfsg1), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libstdc++6 (>= 5), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Recommends: libc6-dev (>= 2.23-1~) Suggests: gcc-12-multilib, gcc-12-doc (>= 12), gcc-12-locales (>= 12) Description: GNU C compiler This is the GNU C compiler, a fairly portable optimizing compiler for C. Homepage: http://gcc.gnu.org/ Package: gcc-12-base Status: install ok installed Priority: optional Section: libs Installed-Size: 100 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Breaks: gnat (<< 7) Description: GCC, the GNU Compiler Collection (base package) This package contains files common to all languages and libraries contained in the GNU Compiler Collection (GCC). Homepage: http://gcc.gnu.org/ Package: gdisk Status: install ok installed Priority: optional Section: admin Installed-Size: 885 Maintainer: Jonathan Carter Architecture: amd64 Version: 1.0.9-2.1 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libncursesw6 (>= 6), libpopt0 (>= 1.14), libstdc++6 (>= 5.2), libtinfo6 (>= 6), libuuid1 (>= 2.16) Recommends: groff-base Description: GPT fdisk text-mode partitioning tool GPT fdisk (aka gdisk) is a text-mode partitioning tool that provides utilities for Globally Unique Identifier (GUID) Partition Table (GPT) disks. . Features: . - Edit GUID partition table definitions - In place conversion of BSD disklabels to GPT - In place conversion of MBR to GPT - In place conversion of GPT to MBR - Create hybrid MBR/GPT layouts - Repair damaged GPT data structures - Repair damaged MBR structures - Back up GPT data to a file (and restore from file) Homepage: http://sourceforge.net/projects/gptfdisk/ Package: genisoimage Status: install ok installed Priority: optional Section: otherosfs Installed-Size: 1658 Maintainer: Joerg Jaspert Architecture: amd64 Source: cdrkit Version: 9:1.1.11-3.4 Replaces: mkisofs Provides: mkisofs Depends: libbz2-1.0, libc6 (>= 2.33), libmagic1 (>= 5.12), zlib1g (>= 1:1.1.4) Suggests: wodim, cdrkit-doc Conflicts: mkhybrid, mkisofs Description: Creates ISO-9660 CD-ROM filesystem images genisoimage is a pre-mastering program for creating ISO-9660 CD-ROM filesystem images, which can then be written to CD or DVD media using the wodim program. genisoimage includes support for making bootable "El Torito" CDs, as well as CDs with support for the Macintosh HFS filesystem. . The package also includes extra tools useful for working with ISO images: * mkzftree - create ISO-9660 image with compressed contents * dirsplit - easily separate large directory contents into disks of predefined size * geteltorito - extract an El Torito boot image from a CD image . Please install cdrkit-doc if you want most of the documentation and README files. Package: gettext-base Status: install ok installed Priority: standard Section: utils Installed-Size: 645 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Source: gettext Version: 0.21-12 Depends: libc6 (>= 2.34) Description: GNU Internationalization utilities for the base system This package includes the gettext and ngettext programs which allow other packages to internationalize the messages given by shell scripts. Homepage: https://www.gnu.org/software/gettext/ Package: gir1.2-glib-2.0 Status: install ok installed Priority: optional Section: introspection Installed-Size: 719 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: gobject-introspection Version: 1.74.0-3 Provides: gir1.2-gio-2.0 (= 1.74.0-3), gir1.2-girepository-2.0 (= 1.74.0-3), gir1.2-gmodule-2.0 (= 1.74.0-3), gir1.2-gobject-2.0 (= 1.74.0-3) Depends: libgirepository-1.0-1 (>= 1.72.0), libglib2.0-0 (>= 2.74.0) Description: Introspection data for GLib, GObject, Gio and GModule GObject Introspection is a project for providing machine readable introspection data of the API of C libraries. This introspection data can be used in several different use cases, for example automatic code generation for bindings, API verification and documentation generation. . GObject Introspection contains tools to generate and handle the introspection data. . This package contains the introspection data for the GLib, GObject, GModule and Gio libraries. Homepage: https://wiki.gnome.org/GObjectIntrospection Package: gir1.2-packagekitglib-1.0 Status: install ok installed Priority: optional Section: introspection Installed-Size: 110 Maintainer: Matthias Klumpp Architecture: amd64 Source: packagekit Version: 1.2.6-5+deb12u1 Depends: gir1.2-glib-2.0 (>= 1.36), libpackagekit-glib2-18 (>= 1.2.6) Description: GObject introspection data for the PackageKit GLib library PackageKit allows performing simple software management tasks over a DBus interface e.g. refreshing the cache, updating, installing and removing software packages or searching for multimedia codecs and file handlers. . This package contains introspection data for the PackageKit GLib interface library. . It can be used by packages using the GIRepository format to generate dynamic bindings. Homepage: https://www.freedesktop.org/software/PackageKit/ Package: git Status: install ok installed Priority: optional Section: vcs Installed-Size: 44890 Maintainer: Jonathan Nieder Architecture: amd64 Multi-Arch: foreign Version: 1:2.39.5-0+deb12u3 Provides: git-completion, git-core Depends: libc6 (>= 2.34), libcurl3-gnutls (>= 7.56.1), libexpat1 (>= 2.0.1), libpcre2-8-0 (>= 10.34), zlib1g (>= 1:1.2.2), perl, liberror-perl, git-man (>> 1:2.39.5), git-man (<< 1:2.39.5-.) Recommends: ca-certificates, patch, less, ssh-client Suggests: gettext-base, git-daemon-run | git-daemon-sysvinit, git-doc, git-email, git-gui, gitk, gitweb, git-cvs, git-mediawiki, git-svn Breaks: bash-completion (<< 1:1.90-1), cogito (<= 0.18.2+), dgit (<< 5.1~), git-buildpackage (<< 0.6.5), git-el (<< 1:2.32.0~rc2-1~), gitosis (<< 0.2+20090917-7), gitpkg (<< 0.15), guilt (<< 0.33), openssh-client (<< 1:6.8), stgit (<< 0.15), stgit-contrib (<< 0.15) Conffiles: /etc/bash_completion.d/git-prompt 7baac5c3ced94ebf2c0e1dde65c3b1a6 Description: fast, scalable, distributed revision control system Git is popular version control system designed to handle very large projects with speed and efficiency; it is used for many high profile open source projects, most notably the Linux kernel. . Git falls in the category of distributed source code management tools. Every Git working directory is a full-fledged repository with full revision tracking capabilities, not dependent on network access or a central server. . This package provides the git main components with minimal dependencies. Additional functionality, e.g. a graphical user interface and revision tree visualizer, tools for interoperating with other VCS's, or a web interface, is provided as separate git* packages. Homepage: https://git-scm.com/ Package: git-man Status: install ok installed Priority: optional Section: doc Installed-Size: 2107 Maintainer: Jonathan Nieder Architecture: all Multi-Arch: foreign Source: git Version: 1:2.39.5-0+deb12u3 Description: fast, scalable, distributed revision control system (manual pages) Git is popular version control system designed to handle very large projects with speed and efficiency; it is used for many high profile open source projects, most notably the Linux kernel. . Git falls in the category of distributed source code management tools. Every Git working directory is a full-fledged repository with full revision tracking capabilities, not dependent on network access or a central server. . This package provides reference documentation for use by the 'man' utility and the 'git help' command. Homepage: https://git-scm.com/ Package: gnupg Status: install ok installed Priority: optional Section: utils Installed-Size: 886 Maintainer: Debian GnuPG Maintainers Architecture: all Multi-Arch: foreign Source: gnupg2 Version: 2.2.40-1.1+deb12u2 Replaces: gnupg2 (<< 2.1.11-7+exp1) Depends: dirmngr (<< 2.2.40-1.1+deb12u2.1~), dirmngr (>= 2.2.40-1.1+deb12u2), gnupg-l10n (= 2.2.40-1.1+deb12u2), gnupg-utils (<< 2.2.40-1.1+deb12u2.1~), gnupg-utils (>= 2.2.40-1.1+deb12u2), gpg (<< 2.2.40-1.1+deb12u2.1~), gpg (>= 2.2.40-1.1+deb12u2), gpg-agent (<< 2.2.40-1.1+deb12u2.1~), gpg-agent (>= 2.2.40-1.1+deb12u2), gpg-wks-client (<< 2.2.40-1.1+deb12u2.1~), gpg-wks-client (>= 2.2.40-1.1+deb12u2), gpg-wks-server (<< 2.2.40-1.1+deb12u2.1~), gpg-wks-server (>= 2.2.40-1.1+deb12u2), gpgsm (<< 2.2.40-1.1+deb12u2.1~), gpgsm (>= 2.2.40-1.1+deb12u2), gpgv (<< 2.2.40-1.1+deb12u2.1~), gpgv (>= 2.2.40-1.1+deb12u2) Suggests: parcimonie, xloadimage Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.2.40-1.1+deb12u2), gnupg2 (<< 2.1.11-7+exp1), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4) Description: GNU privacy guard - a free PGP replacement GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains the full suite of GnuPG tools for cryptographic communications and data storage. Homepage: https://www.gnupg.org/ Package: gnupg-l10n Status: install ok installed Priority: optional Section: localization Installed-Size: 4875 Maintainer: Debian GnuPG Maintainers Architecture: all Multi-Arch: foreign Source: gnupg2 Version: 2.2.40-1.1+deb12u2 Replaces: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~) Breaks: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~) Enhances: dirmngr, gpg, gpg-agent Description: GNU privacy guard - localization files GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC 4880. . This package contains the translation files for the use of GnuPG in non-English locales. Homepage: https://www.gnupg.org/ Package: gnupg-utils Status: install ok installed Priority: optional Section: utils Installed-Size: 1837 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.40-1.1+deb12u2 Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Depends: libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), libksba8 (>= 1.3.5), libreadline8 (>= 6.0), zlib1g (>= 1:1.1.4) Recommends: gpg, gpg-agent, gpgconf, gpgsm Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Description: GNU privacy guard - utility programs GnuPG is GNU's tool for secure communication and data storage. . This package contains several useful utilities for manipulating OpenPGP data and other related cryptographic elements. It includes: . * addgnupghome -- create .gnupg home directories * applygnupgdefaults -- run gpgconf --apply-defaults for all users * gpgcompose -- an experimental tool for constructing arbitrary sequences of OpenPGP packets (e.g. for testing) * gpgparsemail -- parse an e-mail message into annotated format * gpgsplit -- split a sequence of OpenPGP packets into files * gpgtar -- encrypt or sign files in an archive * kbxutil -- list, export, import Keybox data * lspgpot -- convert PGP ownertrust values to GnuPG * migrate-pubring-from-classic-gpg -- use only "modern" formats * symcryptrun -- use simple symmetric encryption tool in GnuPG framework * watchgnupg -- watch socket-based logs Homepage: https://www.gnupg.org/ Package: gnustep-base-common Status: install ok installed Priority: optional Section: gnustep Installed-Size: 695 Maintainer: Debian GNUstep maintainers Architecture: all Source: gnustep-base Version: 1.28.1+really1.28.0-5 Depends: gnustep-common (>= 2.9.0), ca-certificates, tzdata Description: GNUstep Base library - common files The GNUstep Base Library is a powerful fast library of general-purpose, non-graphical Objective C classes, inspired by the OpenStep API but implementing Apple and GNU additions to the API as well. . This package contains the common files needed by the GNUstep Base library. Homepage: http://gnustep.org Package: gnustep-base-runtime Status: install ok installed Priority: optional Section: gnustep Installed-Size: 1151 Maintainer: Debian GNUstep maintainers Architecture: amd64 Source: gnustep-base Version: 1.28.1+really1.28.0-5 Depends: gnustep-base-common (= 1.28.1+really1.28.0-5), libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgnustep-base1.28 (>= 1.28.1+really1.28.0), libobjc4 (>= 4.6), init-system-helpers (>= 1.51), lsb-base Conffiles: /etc/default/gdomap 6655b738644b097afb881093f321b918 /etc/init.d/gdomap f02c66c7bba930d5658b659718d534ea Description: GNUstep Base library - daemons and tools The GNUstep Base Library is a powerful fast library of general-purpose, non-graphical Objective C classes, inspired by the OpenStep API but implementing Apple and GNU additions to the API as well. . This package contains the runtime support files needed by GNUstep applications. Homepage: http://gnustep.org Package: gnustep-common Status: install ok installed Priority: optional Section: gnustep Installed-Size: 262 Maintainer: Debian GNUstep maintainers Architecture: amd64 Source: gnustep-make Version: 2.9.1-2 Provides: gnustep-fslayout-fhs Conffiles: /etc/GNUstep/GNUstep.conf 456fdb06982a3684a485aa4100aceccb Description: Common files for the core GNUstep environment This package contains the main GNUstep configuration file, common files, scripts and directory layout needed to run any GNUstep software. Homepage: http://gnustep.org Package: gpg Status: install ok installed Priority: optional Section: utils Installed-Size: 1582 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.40-1.1+deb12u2 Replaces: gnupg (<< 2.1.21-4) Depends: gpgconf (= 2.2.40-1.1+deb12u2), libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), libreadline8 (>= 6.0), libsqlite3-0 (>= 3.7.15), zlib1g (>= 1:1.1.4) Recommends: gnupg (= 2.2.40-1.1+deb12u2) Breaks: gnupg (<< 2.1.21-4) Description: GNU Privacy Guard -- minimalist public key operations GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains /usr/bin/gpg itself, and is useful on its own only for public key operations (encryption, signature verification, listing OpenPGP certificates, etc). If you want full capabilities (including secret key operations, network access, etc), please install the "gnupg" package, which pulls in the full suite of tools. Homepage: https://www.gnupg.org/ Package: gpg-agent Status: install ok installed Priority: optional Section: utils Installed-Size: 1349 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.40-1.1+deb12u2 Replaces: gnupg-agent (<< 2.1.21-4) Provides: gnupg-agent Depends: gpgconf (= 2.2.40-1.1+deb12u2), pinentry-curses | pinentry, init-system-helpers (>= 1.52), libassuan0 (>= 2.5.1), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), libnpth0 (>= 0.90) Recommends: gnupg (= 2.2.40-1.1+deb12u2) Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon Breaks: gnupg-agent (<< 2.1.21-4) Conffiles: /etc/X11/Xsession.d/90gpg-agent fbb9ce5e8e4ba5727090f0aa51b61a82 /etc/logcheck/ignore.d.server/gpg-agent 2d0fbc91a955ba69408ca033d7ae2455 Description: GNU privacy guard - cryptographic agent GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains the agent program gpg-agent which handles all secret key material for OpenPGP and S/MIME use. The agent also provides a passphrase cache, which is used by pre-2.1 versions of GnuPG for OpenPGP operations. Without this package, trying to do secret-key operations with any part of the modern GnuPG suite will fail. Homepage: https://www.gnupg.org/ Package: gpg-wks-client Status: install ok installed Priority: optional Section: utils Installed-Size: 683 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.40-1.1+deb12u2 Depends: dirmngr (= 2.2.40-1.1+deb12u2), gpg (= 2.2.40-1.1+deb12u2), gpg-agent (= 2.2.40-1.1+deb12u2), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42) Recommends: gnupg (= 2.2.40-1.1+deb12u2) Description: GNU privacy guard - Web Key Service client GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package provides the GnuPG client for the Web Key Service protocol. . A Web Key Service is a service that allows users to upload keys per mail to be verified over https as described in https://tools.ietf.org/html/draft-koch-openpgp-webkey-service . For more information see: https://wiki.gnupg.org/WKS Homepage: https://www.gnupg.org/ Package: gpg-wks-server Status: install ok installed Priority: optional Section: utils Installed-Size: 658 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.40-1.1+deb12u2 Depends: gpg (= 2.2.40-1.1+deb12u2), gpg-agent (= 2.2.40-1.1+deb12u2), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42) Recommends: gnupg (= 2.2.40-1.1+deb12u2) Description: GNU privacy guard - Web Key Service server GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package provides the GnuPG server for the Web Key Service protocol. . A Web Key Service is a service that allows users to upload keys per mail to be verified over https as described in https://tools.ietf.org/html/draft-koch-openpgp-webkey-service . For more information see: https://wiki.gnupg.org/WKS Homepage: https://www.gnupg.org/ Package: gpgconf Status: install ok installed Priority: optional Section: utils Installed-Size: 804 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.40-1.1+deb12u2 Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Depends: libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), libreadline8 (>= 6.0) Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Description: GNU privacy guard - core configuration utilities GnuPG is GNU's tool for secure communication and data storage. . This package contains core utilities used by different tools in the suite offered by GnuPG. It can be used to programmatically edit config files for tools in the GnuPG suite, to launch or terminate per-user daemons (if installed), etc. Homepage: https://www.gnupg.org/ Package: gpgsm Status: install ok installed Priority: optional Section: utils Installed-Size: 993 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.40-1.1+deb12u2 Replaces: gnupg2 (<< 2.1.10-2) Depends: gpgconf (= 2.2.40-1.1+deb12u2), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), libksba8 (>= 1.6.0), libreadline8 (>= 6.0) Recommends: gnupg (= 2.2.40-1.1+deb12u2) Breaks: gnupg2 (<< 2.1.10-2) Description: GNU privacy guard - S/MIME version GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC4880. . This package contains the gpgsm program. gpgsm is a tool to provide digital encryption and signing services on X.509 certificates and the CMS protocol. gpgsm includes complete certificate management. Homepage: https://www.gnupg.org/ Package: gpgv Status: install ok installed Priority: important Section: utils Installed-Size: 918 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg2 Version: 2.2.40-1.1+deb12u2 Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1) Depends: libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), zlib1g (>= 1:1.1.4) Suggests: gnupg Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29) Description: GNU privacy guard - signature verification tool GnuPG is GNU's tool for secure communication and data storage. . gpgv is actually a stripped-down version of gpg which is only able to check signatures. It is somewhat smaller than the fully-blown gpg and uses a different (and simpler) way to check that the public keys used to make the signature are valid. There are no configuration files and only a few options are implemented. Homepage: https://www.gnupg.org/ Package: grep Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 1245 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: foreign Version: 3.8-5 Provides: rgrep Depends: dpkg (>= 1.15.4) | install-info Pre-Depends: libc6 (>= 2.34), libpcre2-8-0 (>= 10.32) Conflicts: rgrep Description: GNU grep, egrep and fgrep 'grep' is a utility to search for text in files; it can be used from the command line or in scripts. Even if you don't want to use it, other packages on your system probably will. . The GNU family of grep utilities may be the "fastest grep in the west". GNU grep is based on a fast lazy-state deterministic matcher (about twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper search for a fixed string that eliminates impossible text from being considered by the full regexp matcher without necessarily having to look at every character. The result is typically many times faster than Unix grep or egrep. (Regular expressions containing backreferencing will run more slowly, however.) Homepage: https://www.gnu.org/software/grep/ Package: groff-base Status: install ok installed Priority: important Section: text Installed-Size: 3673 Maintainer: Colin Watson Architecture: amd64 Multi-Arch: foreign Source: groff Version: 1.22.4-10 Depends: libc6 (>= 2.35), libgcc-s1 (>= 4.0), libstdc++6 (>= 4.1.1), libuchardet0 (>= 0.0.1) Suggests: groff Conffiles: /etc/groff/man.local c8d6e2bf36a23e2e9599f7f66ab05463 /etc/groff/mdoc.local 4bc6267468942826b757fa2f868c8237 Description: GNU troff text-formatting system (base system components) This package contains the traditional UN*X text formatting tools troff, nroff, tbl, eqn, and pic. These utilities, together with the man-db package, are essential for displaying the on-line manual pages. . groff-base is a stripped-down package containing the necessary components to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript device (groff's default). Users who want a full groff installation, with the standard set of devices, fonts, macros, and documentation, should install the groff package. Homepage: https://www.gnu.org/software/groff/ Package: grub-common Status: install ok installed Priority: optional Section: admin Installed-Size: 17824 Maintainer: GRUB Maintainers Architecture: amd64 Multi-Arch: foreign Source: grub2 Version: 2.06-13+deb12u2 Replaces: grub-coreboot (<< 2.00-4), grub-efi (<< 1.99-1), grub-efi-amd64 (<< 2.00-4), grub-efi-ia32 (<< 2.00-4), grub-efi-ia64 (<< 2.00-4), grub-ieee1275 (<< 2.00-4), grub-linuxbios (<< 1.96+20080831-1), grub-pc (<< 2.00-4), grub-yeeloong (<< 2.00-4), init-select Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), libefiboot1 (>= 37), libefivar1 (>= 37), libfreetype6 (>= 2.2.1), libfuse2 (>= 2.8.4-1.4), liblzma5 (>= 5.1.1alpha+20120614), gettext-base Recommends: os-prober (>= 1.33) Suggests: multiboot-doc, grub-emu, mtools, xorriso (>= 0.5.6.pl00), desktop-base (>= 4.0.6), console-setup Breaks: apport (<< 2.1.1), friendly-recovery (<< 0.2.13), lupin-support (<< 0.55), mdadm (<< 2.6.7-2) Conflicts: init-select Conffiles: /etc/default/grub.d/init-select.cfg 86dea2a78312ca80f740098987d9c0fb /etc/grub.d/00_header cd52708cba4d78d7ef96176258d4593d /etc/grub.d/05_debian_theme 7af00bf2d834b3104688c9cbf40b23b3 /etc/grub.d/10_linux 16adfed0ec58a4db1e3f3f38e49f06fc /etc/grub.d/20_linux_xen 80253021369176084e3483b13c9e689e /etc/grub.d/30_os-prober e5c89c9c421bbe7c2ad9eb86129fd4e0 /etc/grub.d/30_uefi-firmware ed41aff510f9176cdbbecfe1a964e4c5 /etc/grub.d/40_custom babe7de352fe18de5a238569cf4b8a11 /etc/grub.d/41_custom 1d876baff8ca3841aa6ba057e881a2e4 /etc/grub.d/README be58f42dfe74feb6eeb98c6a843c743f Description: GRand Unified Bootloader (common files) This package contains common files shared by the distinct flavours of GRUB. It is shared between GRUB Legacy and GRUB 2, although a number of files specific to GRUB 2 are here as long as they do not break GRUB Legacy. . grub-mkrescue needs the suggested packages mtools (for UEFI targets) and xorriso. Homepage: https://www.gnu.org/software/grub/ Package: grub-efi-amd64 Status: install ok installed Priority: optional Section: admin Installed-Size: 176 Maintainer: GRUB Maintainers Architecture: amd64 Multi-Arch: foreign Source: grub2 Version: 2.06-13+deb12u2 Replaces: grub, grub-common (<= 1.97~beta2-1), grub-coreboot, grub-efi-ia32, grub-ieee1275, grub-legacy, grub-pc, grub2 (<< 2.06-13+deb12u2) Depends: debconf (>= 0.5) | debconf-2.0, grub-common (= 2.06-13+deb12u2), grub2-common (= 2.06-13+deb12u2), grub-efi-amd64-bin (= 2.06-13+deb12u2), ucf Conflicts: elilo, grub, grub-coreboot, grub-efi-ia32, grub-ieee1275, grub-legacy, grub-pc, grub-xen Description: GRand Unified Bootloader, version 2 (EFI-AMD64 version) GRUB is a portable, powerful bootloader. This version of GRUB is based on a cleaner design than its predecessors, and provides the following new features: . - Scripting in grub.cfg using BASH-like syntax. - Support for modern partition maps such as GPT. - Modular generation of grub.cfg via update-grub. Packages providing GRUB add-ons can plug in their own script rules and trigger updates by invoking update-grub. . This is a dependency package for a version of GRUB that has been built for use with the EFI-AMD64 architecture, as used by Intel Macs (unless a BIOS interface has been activated). Installing this package indicates that this version of GRUB should be the active boot loader. Homepage: https://www.gnu.org/software/grub/ Package: grub-efi-amd64-bin Status: install ok installed Priority: optional Section: admin Installed-Size: 18169 Maintainer: GRUB Maintainers Architecture: amd64 Multi-Arch: foreign Source: grub2 Version: 2.06-13+deb12u2 Replaces: grub-common (<= 1.97~beta2-1), grub-efi-amd64 (<< 1.99-1), grub2 (<< 2.06-13+deb12u2) Depends: grub-common (= 2.06-13+deb12u2) Recommends: grub-efi-amd64-signed, efibootmgr Description: GRand Unified Bootloader, version 2 (EFI-AMD64 modules) GRUB is a portable, powerful bootloader. This version of GRUB is based on a cleaner design than its predecessors, and provides the following new features: . - Scripting in grub.cfg using BASH-like syntax. - Support for modern partition maps such as GPT. - Modular generation of grub.cfg via update-grub. Packages providing GRUB add-ons can plug in their own script rules and trigger updates by invoking update-grub. . This package contains GRUB modules that have been built for use with the EFI-AMD64 architecture, as used by Intel Macs (unless a BIOS interface has been activated). It can be installed in parallel with other flavours, but will not automatically install GRUB as the active boot loader nor automatically update grub.cfg on upgrade unless grub-efi-amd64 is also installed. Homepage: https://www.gnu.org/software/grub/ Efi-Vendor: debian Package: grub-pc-bin Status: install ok installed Priority: optional Section: admin Installed-Size: 3119 Maintainer: GRUB Maintainers Architecture: amd64 Multi-Arch: foreign Source: grub2 Version: 2.06-13+deb12u2 Replaces: grub-common (<= 1.97~beta2-1), grub-pc (<< 1.99-1), grub2 (<< 2.06-13+deb12u2) Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), grub-common (= 2.06-13+deb12u2) Suggests: desktop-base (>= 4.0.6) Description: GRand Unified Bootloader, version 2 (PC/BIOS modules) GRUB is a portable, powerful bootloader. This version of GRUB is based on a cleaner design than its predecessors, and provides the following new features: . - Scripting in grub.cfg using BASH-like syntax. - Support for modern partition maps such as GPT. - Modular generation of grub.cfg via update-grub. Packages providing GRUB add-ons can plug in their own script rules and trigger updates by invoking update-grub. - VESA-based graphical mode with background image support and complete 24-bit color set. - Support for extended charsets. Users can write UTF-8 text to their menu entries. . This package contains GRUB modules that have been built for use with the traditional PC/BIOS architecture. It can be installed in parallel with other flavours, but will not automatically install GRUB as the active boot loader nor automatically update grub.cfg on upgrade unless grub-pc is also installed. Homepage: https://www.gnu.org/software/grub/ Package: grub2-common Status: install ok installed Priority: optional Section: admin Installed-Size: 1353 Maintainer: GRUB Maintainers Architecture: amd64 Multi-Arch: foreign Source: grub2 Version: 2.06-13+deb12u2 Replaces: grub, grub-cloud-amd64 (<< 0.0.4), grub-common (<< 1.99-1), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-32), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy, grub-legacy-doc (<< 0.97-59), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7) Depends: grub-common (= 2.06-13+deb12u2), dpkg (>= 1.15.4), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), libefiboot1 (>= 37), libefivar1 (>= 37), liblzma5 (>= 5.1.1alpha+20120614) Breaks: grub (<< 0.97-54), grub-cloud-amd64 (<< 0.0.4), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-32), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy-doc (<< 0.97-59), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7), shim (<< 0.9+1474479173.6c180c6-0ubuntu1~) Conflicts: grub-legacy Conffiles: /etc/kernel/postinst.d/zz-update-grub 5a98abefbfe97dbed36db7899251e433 /etc/kernel/postrm.d/zz-update-grub 5a98abefbfe97dbed36db7899251e433 Description: GRand Unified Bootloader (common files for version 2) This package contains common files shared by the distinct flavours of GRUB. The files in this package are specific to GRUB 2, and would break GRUB Legacy if installed on the same system. Homepage: https://www.gnu.org/software/grub/ Package: gzip Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 252 Maintainer: Milan Kupcevic Architecture: amd64 Version: 1.12-1 Depends: dpkg (>= 1.15.4) | install-info Pre-Depends: libc6 (>= 2.33) Suggests: less Description: GNU compression utilities This package provides the standard GNU file compression utilities, which are also the default compression tools for Debian. They typically operate on files with names ending in '.gz', but can also decompress files ending in '.Z' created with 'compress'. Homepage: https://www.gnu.org/software/gzip/ Package: hc-utils Status: install ok installed Priority: optional Section: admin Installed-Size: 26 Maintainer: Markus Schade Architecture: all Version: 0.0.5-1 Depends: curl, iproute2, isc-dhcp-client Description: A set of tools for the Hetzner Cloud platform hc-utils contains utilities to automatically configure Hetzner Cloud private network interfaces and block storage volumes Homepage: https://github.com/hetznercloud/hc-utils Package: hicolor-icon-theme Status: install ok installed Priority: optional Section: misc Installed-Size: 441 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Version: 0.17-2 Description: default fallback theme for FreeDesktop.org icon themes This is the default fallback theme used by implementations of the Freedesktop.org Icon Theme specification. Package: hostname Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 46 Maintainer: Michael Meskes Architecture: amd64 Version: 3.23+nmu1 Replaces: nis (<< 3.17-30) Pre-Depends: libc6 (>= 2.34) Breaks: nis (<< 3.17-30) Description: utility to set/show the host name or domain name This package provides commands which can be used to display the system's DNS name, and to display or set its hostname or NIS domain name. Package: htop Status: install ok installed Priority: optional Section: utils Installed-Size: 378 Maintainer: Daniel Lange Architecture: amd64 Version: 3.2.2-2 Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libtinfo6 (>= 6) Suggests: lm-sensors, lsof, strace Description: interactive processes viewer Htop is an ncursed-based process viewer similar to top, but it allows one to scroll the list vertically and horizontally to see all processes and their full command lines. . Tasks related to processes (killing, renicing) can be done without entering their PIDs. Homepage: https://htop.dev/ Package: hugo Status: install ok installed Priority: optional Section: web Installed-Size: 52391 Maintainer: Debian Go Packaging Team Architecture: amd64 Version: 0.111.3-1 Depends: libsass1 (>= 3.6.5), libc6 (>= 2.34), libwebp7 (>= 1.2.4) Recommends: git, golang-any Suggests: asciidoctor, npm, pandoc, python3-docutils Description: Fast and flexible Static Site Generator written in Go Hugo is a static site generator written in Go. It is optimized for speed, ease of use, and configurability. Hugo takes a directory with content and templates, and renders them into a full HTML website. . Hugo relies on Markdown files with front matter for meta data. And you can run Hugo from any directory. This works well for shared hosts and other systems where you don’t have a privileged account. . Hugo renders a typical website of moderate size in a fraction of a second. A good rule of thumb is that each piece of content renders in around 1 millisecond. . Hugo is meant to work well for any kind of website including blogs, tumblelogs and docs. . Complete documentation is available at https://gohugo.io/ Static-Built-Using: go-md2man-v2 (= 2.0.2+ds1-1), golang-1.19 (= 1.19.6-2), golang-blackfriday-v2 (= 2.1.0-1), golang-fsnotify (= 1.6.0-2), golang-github-alecthomas-chroma-v2 (= 2.5.0-1), golang-github-armon-go-radix (= 1.0.0-2), golang-github-aws-aws-sdk-go (= 1.44.133-1), golang-github-azure-azure-pipeline-go (= 0.2.3-1), golang-github-azure-azure-storage-blob-go (= 0.15.0-1), golang-github-azure-go-autorest (= 14.2.0+git20220726.711dde1-1), golang-github-bep-clock (= 0.3.0-2), golang-github-bep-debounce (= 1.2.0+really1.2.0-2), golang-github-bep-gitmap (= 1.1.2-2), golang-github-bep-goat (= 0.5.0-2), golang-github-bep-godartsass (= 0.16.0-1), golang-github-bep-golibsass (= 1.1.0-1), golang-github-bep-gowebp (= 0.2.0+dfsg-2), golang-github-bep-overlayfs (= 0.6.0-2), golang-github-bep-tmc (= 0.5.1-3), golang-github-burntsushi-locker (= 0.0~git20171006.a6e239e-3), golang-github-clbanning-mxj (= 2.5.7-1), golang-github-cli-safeexec (= 1.0.1-1), golang-github-disintegration-gift (= 1.2.1-3), golang-github-dlclark-regexp2 (= 1.4.0+ds1-1), golang-github-dustin-go-humanize (= 1.0.0-3), golang-github-evanw-esbuild (= 0.17.0-1), golang-github-frankban-quicktest (= 1.14.4-1), golang-github-getkin-kin-openapi (= 0.110.0-1), golang-github-ghodss-yaml (= 1.0.0+git20220118.d8423dc-2), golang-github-go-openapi-jsonpointer (= 1:0.19.5-4), golang-github-go-openapi-swag (= 1:0.21.1-1), golang-github-gobuffalo-flect (= 0.3.0-1), golang-github-gobwas-glob (= 0.2.3+git20180208.19c076c-2), golang-github-golang-groupcache (= 0.0~git20200121.8c9f03a-2), golang-github-golang-jwt-jwt (= 4.4.3-1), golang-github-golang-protobuf-1-3 (= 1.3.5-4), golang-github-google-go-cmp (= 0.5.9-1), golang-github-google-uuid (= 1.3.0-1), golang-github-google-wire (= 0.5.0-2), golang-github-googleapis-gax-go (= 2.0.5-4), golang-github-gorilla-websocket (= 1.5.0-2), golang-github-hairyhenderson-go-codeowners (= 0.2.2+git20201026.cdc7c07-2), golang-github-invopop-yaml (= 0.2.0-2), golang-github-jdkato-prose (= 1.2.1-1), golang-github-jmespath-go-jmespath (= 0.4.0-2), golang-github-josharian-intern (= 1.0.0-3), golang-github-kyokomi-emoji (= 2.2.12-1), golang-github-mailru-easyjson (= 0.7.7-1), golang-github-marekm4-color-extractor (= 1.2.0-2), golang-github-mattn-go-ieproxy (= 0.0.9-1), golang-github-mattn-go-isatty (= 0.0.17-1), golang-github-mattn-go-runewidth (= 0.0.14-1), golang-github-mitchellh-hashstructure (= 1.1.0-1), golang-github-mitchellh-mapstructure (= 1.5.0-2), golang-github-mohae-deepcopy (= 0.0~git20170929.c48cc78-4), golang-github-muesli-smartcrop (= 0.3.0+dfsg1-2), golang-github-niklasfasching-go-org (= 1.6.6-1), golang-github-olekukonko-tablewriter (= 0.0.5-2), golang-github-opennota-urlesc (= 0.0~git20160726.0.5bd2802-1.1), golang-github-pelletier-go-toml.v2 (= 2.0.6-1), golang-github-puerkitobio-purell (= 1.1.1-1), golang-github-rivo-uniseg (= 0.4.2-1), golang-github-rogpeppe-go-internal (= 1.9.0-1), golang-github-rwcarlsen-goexif (= 0.0~git20190401.9e8deec-2), golang-github-sanity-io-litter (= 1.5.5-1), golang-github-spf13-afero (= 1.9.3-1), golang-github-spf13-cast (= 1.5.0-2), golang-github-spf13-cobra (= 1.6.1-1), golang-github-spf13-fsync (= 0.9.0-2), golang-github-spf13-jwalterweatherman (= 1.1.0+really1.1.0-2), golang-github-spf13-pflag (= 1.0.6~git20210604-d5e0c0615ace-1), golang-github-tdewolff-minify (= 2.12.4-1), golang-github-tdewolff-parse (= 2.6.5-1), golang-github-yuin-goldmark (= 1.5.4-1), golang-go.crypto (= 1:0.4.0-1), golang-go.opencensus (= 0.24.0-1), golang-go.uber-atomic (= 1.10.0-2), golang-gocloud (= 0.23.0-1), golang-golang-x-exp (= 0.0~git20221028.83b7d23-2), golang-golang-x-image (= 0.5.0-1), golang-golang-x-net (= 1:0.7.0+dfsg-1), golang-golang-x-oauth2 (= 0.3.0-1), golang-golang-x-sync (= 0.1.0-1), golang-golang-x-sys (= 0.3.0-1), golang-golang-x-text (= 0.7.0-1), golang-golang-x-tools (= 1:0.5.0+ds-1), golang-golang-x-xerrors (= 0.0~git20200804.5ec99f8-1), golang-google-api (= 0.61.0-1), golang-google-cloud (= 0.56.0-3), golang-google-genproto (= 0.0~git20200413.b5235f6-3), golang-google-grpc (= 1.33.3-2), golang-google-protobuf (= 1.28.1-3), golang-gopkg-yaml.v3 (= 3.0.1-3), golang-pretty (= 0.3.0-1), golang-text (= 0.2.0-2), golang-yaml.v2 (= 2.4.0-4) Homepage: https://gohugo.io/ Package: ifupdown Status: install ok installed Priority: important Section: admin Installed-Size: 199 Maintainer: Josué Ortega Architecture: amd64 Multi-Arch: foreign Version: 0.8.41 Replaces: systemd (<< 228-3~) Depends: libc6 (>= 2.34), adduser, iproute2 Recommends: isc-dhcp-client | dhcp-client Suggests: ppp, rdnssd Breaks: systemd (<< 228-3~) Conffiles: /etc/default/networking 3f34a1868c2e6cd41caec70c8d1e5659 /etc/init.d/networking 6cd48e85fd010cd8a98a80c3c5707776 /etc/network/if-down.d/resolved 67bb64fad6b8aa428801e8bb3417ec5a /etc/network/if-up.d/resolved 576db38f04d2e8d4bd7b86a5f4fa9d8f Description: high level tools to configure network interfaces This package provides the tools ifup and ifdown which may be used to configure (or, respectively, deconfigure) network interfaces based on interface definitions in the file /etc/network/interfaces. Package: imagemagick Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 184 Maintainer: ImageMagick Packaging Team Architecture: amd64 Multi-Arch: foreign Version: 8:6.9.11.60+dfsg-1.6+deb12u11 Depends: imagemagick-6.q16 (>= 8:6.9.2.10+dfsg-2~) Description: image manipulation programs -- binaries ImageMagick is a software suite to create, edit, and compose bitmap images. It can read, convert and write images in a variety of formats (over 100) including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript, SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale, shear and transform images, adjust image colors, apply various special effects, or draw text, lines, polygons, ellipses and Bézier curves. All manipulations can be achieved through shell commands as well as through an X11 graphical interface (display). . This package include links to channel depth specific binaries and manual pages. . This is a dummy package. You can safely purge or remove it. Homepage: https://www.imagemagick.org/ Package: imagemagick-6-common Status: install ok installed Priority: optional Section: graphics Installed-Size: 544 Maintainer: ImageMagick Packaging Team Architecture: all Multi-Arch: foreign Source: imagemagick Version: 8:6.9.11.60+dfsg-1.6+deb12u11 Replaces: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16 (<< 8:6.9.6.2+dfsg-3~) Provides: imagemagick-common Breaks: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16-2 (<< 8:6.9.6.2+dfsg-3~), libmagickcore-6.q16-3 (<< 8:6.9.6.8+dfsg-1~), libmagickcore-6.q16-4 (<< 8:6.9.8.9+dfsg-1~), libmagickcore-6.q16hdri-4 (<< 8:6.9.8.9+dfsg-1~) Conffiles: /etc/ImageMagick-6/coder.xml 2cd28d60bb45db29bba17f35dc58ccb9 /etc/ImageMagick-6/colors.xml 7a58fb76b799bf829c55eecd08db28c2 /etc/ImageMagick-6/delegates.xml 00f88a4ce8130b4dd764e8926289b26a /etc/ImageMagick-6/log.xml 29c0a0702c3729fec215ce53438eb608 /etc/ImageMagick-6/magic.xml 04b219d820811a6cb1bc7af03b52b626 /etc/ImageMagick-6/mime.xml a0c1c972c13db8986951e0016f5be31b /etc/ImageMagick-6/policy.xml ac16a7083b092130e93334bbd077e50c /etc/ImageMagick-6/quantization-table.xml 948aa1faac66b697266eaa55e8a052e5 /etc/ImageMagick-6/thresholds.xml 99375e73d2a9a3acca91bf1011d15656 /etc/ImageMagick-6/type-apple.xml 94aac3cbd6fdb6ccf338e8e60c3a6fcc /etc/ImageMagick-6/type-dejavu.xml 2914462b5aec3bf19f4f706c018e904f /etc/ImageMagick-6/type-ghostscript.xml 76f2f31af66d562422aa56095cf67284 /etc/ImageMagick-6/type-urw-base35.xml 0cbc7447c3b14e3a26025cf0bec201f7 /etc/ImageMagick-6/type-windows.xml 3a8000b7f83d4108e7c3024c1bcc403c /etc/ImageMagick-6/type.xml a355c73d6843b2bfb5b5d7bb9cf2a5de Description: image manipulation programs -- infrastructure imagemagick-common contains the filesystem infrastructure required for further installation of imagemagick in any configuration; it does not provide a full installation of binaries, libraries, and utilities required to run imagemagick. . This package is independent of channel depth. Homepage: https://www.imagemagick.org/ Package: imagemagick-6.q16 Status: install ok installed Priority: optional Section: graphics Installed-Size: 619 Maintainer: ImageMagick Packaging Team Architecture: amd64 Multi-Arch: foreign Source: imagemagick Version: 8:6.9.11.60+dfsg-1.6+deb12u11 Replaces: imagemagick (<< 8:6.9.2.10+dfsg-2~) Provides: imagemagick, imagemagick-6.defaultquantum Depends: libc6 (>= 2.34), libmagickcore-6.q16-6 (>= 8:6.9.10.2), libmagickwand-6.q16-6 (>= 8:6.9.10.2), hicolor-icon-theme Recommends: libmagickcore-6.q16-6-extra, ghostscript, netpbm Suggests: imagemagick-doc, autotrace, cups-bsd | lpr | lprng, curl, enscript, ffmpeg, gimp, gnuplot, grads, graphviz, groff-base, hp2xx, html2ps, libwmf-bin, mplayer, povray, radiance, sane-utils, texlive-base-bin, transfig, ufraw-batch, xdg-utils Breaks: libmagickcore-dev (<< 8:6.9.2.10+dfsg-2~) Description: image manipulation programs -- quantum depth Q16 ImageMagick is a software suite to create, edit, and compose bitmap images. It can read, convert and write images in a variety of formats (over 100) including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript, SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale, shear and transform images, adjust image colors, apply various special effects, or draw text, lines, polygons, ellipses and Bézier curves. All manipulations can be achieved through shell commands as well as through an X11 graphical interface (display). . For working with the SVG, WMF, OpenEXR, DjVu and Graphviz formats, you need to install the libmagickcore-6.q16-6-extra package. . This version of imagemagick is compiled for a channel depth of 16 bits (Q16). Homepage: https://www.imagemagick.org/ Package: inetutils-telnet Status: install ok installed Priority: standard Section: net Installed-Size: 257 Maintainer: Guillem Jover Architecture: amd64 Source: inetutils Version: 2:2.4-2+deb12u3 Provides: telnet, telnet-client Depends: libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.13~alpha1+dfsg), libtinfo6 (>= 6), netbase Description: telnet client The telnet command is used for interactive communication with another host using the TELNET protocol. . This implementation supports Kerberos, for authentication and encryption. Homepage: https://www.gnu.org/software/inetutils/ Package: init Status: install ok installed Priority: important Section: metapackages Installed-Size: 13 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: foreign Source: init-system-helpers Version: 1.65.2+deb12u1 Pre-Depends: systemd-sysv | sysvinit-core Description: metapackage ensuring an init system is installed This package is a metapackage which allows you to select from the available init systems while ensuring that one of these is available on the system at all times. Important: yes Package: init-system-helpers Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 133 Maintainer: Debian systemd Maintainers Architecture: all Multi-Arch: foreign Version: 1.65.2+deb12u1 Depends: usrmerge | usr-is-merged Description: helper tools for all init systems This package contains helper tools that are necessary for switching between the various init systems that Debian contains (e. g. sysvinit or systemd). An example is deb-systemd-helper, a script that enables systemd unit files without depending on a running systemd. . It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which provide an abstraction for enabling, disabling, starting, and stopping services for all supported Debian init systems as specified by the policy. . While this package is maintained by pkg-systemd-maintainers, it is NOT specific to systemd at all. Maintainers of other init systems are welcome to include their helpers in this package. Package: initramfs-tools Status: install ok installed Priority: optional Section: utils Installed-Size: 58 Maintainer: Debian kernel team Architecture: all Multi-Arch: foreign Version: 0.142+deb12u3 Provides: linux-initramfs-tool Depends: initramfs-tools-core (= 0.142+deb12u3), linux-base Suggests: bash-completion Breaks: e2fsprogs (<< 1.42.13), initscripts (<< 2.88dsf-59.3~), upstart Conflicts: linux-initramfs-tool, usplash (<< 0.5.50) Conffiles: /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297 /etc/kernel/postinst.d/initramfs-tools c1cb0e052a2cdeef4f3257585c83c58d /etc/kernel/postrm.d/initramfs-tools e7471d253a5b24e2fd85b40be4e43218 Description: generic modular initramfs generator (automation) This package builds a bootable initramfs for Linux kernel packages. The initramfs is loaded along with the kernel and is responsible for mounting the root filesystem and starting the main init system. Package: initramfs-tools-core Status: install ok installed Priority: optional Section: utils Installed-Size: 161 Maintainer: Debian kernel team Architecture: all Multi-Arch: foreign Source: initramfs-tools Version: 0.142+deb12u3 Replaces: initramfs-tools (<< 0.121~) Depends: klibc-utils (>= 2.0.4-8~), cpio (>= 2.12), kmod, udev, coreutils (>= 8.24), logsave | e2fsprogs (<< 1.45.3-1~) Recommends: busybox (>= 1:1.22.0-17~) | busybox-static (>= 1:1.22.0-17~), zstd Suggests: bash-completion Breaks: busybox (<< 1:1.22.0-17~), busybox-static (<< 1:1.22.0-17~), initramfs-tools (<< 0.121~) Conffiles: /etc/initramfs-tools/initramfs.conf 7cd32817dcb81991da2e2a928a32fdb0 Description: generic modular initramfs generator (core tools) This package contains the mkinitramfs program that can be used to create a bootable initramfs for a Linux kernel. The initramfs should be loaded along with the kernel and is then responsible for mounting the root filesystem and starting the main init system. Package: inotify-tools Status: install ok installed Priority: optional Section: misc Installed-Size: 160 Maintainer: Joao Eriberto Mota Filho Architecture: amd64 Multi-Arch: foreign Version: 3.22.6.0-4 Depends: libc6 (>= 2.34), libinotifytools0 (>= 3.22.1.0) Description: command-line programs providing a simple interface to inotify inotify (inode notify) is a Linux kernel subsystem that monitors events in filesystems and reports those events to applications in real time via API. . inotify can be used to monitor individual files or directories. When a directory is monitored, inotify will return events for the directory itself and for files inside the directory. . inotify-tools is a set of command-line programs for Linux providing a simple interface to inotify. These programs can be used to monitor and act upon filesystem events. inotify-tools consists of four utilities: inotifywait, inotifywatch, fsnotifywait and fsnotifywatch. . inotifywait efficiently waits for changes to files, making it appropriate for use in shell scripts. . inotifywatch collects filesystem usage statistics and outputs counts of each inotify event. . fsnotifywait and fsnotifywatch are similar to inotifywait and inotifywatch, but they are using Linux's fanotify(7) interface by default. The fanotify API also provides notification and interception of filesystem events. Additional capabilities compared to the inotify(7) API include the ability to monitor all of the objects in a mounted filesystem, the ability to make access permission decisions, and the possibility to read or modify files before access by other applications. . inotify-tools is also useful for security activities in firewall systems or to detect changes and injections of new files in webservers by intruders. Homepage: https://github.com/rvoicilas/inotify-tools/wiki/ Package: iproute2 Status: install ok installed Priority: important Section: net Installed-Size: 3516 Maintainer: Debian Kernel Team Architecture: amd64 Multi-Arch: foreign Version: 6.1.0-3 Replaces: iproute Provides: arpd Depends: debconf (>= 0.5) | debconf-2.0, libbpf1 (>= 1:0.6.0), libbsd0 (>= 0.0), libc6 (>= 2.34), libcap2 (>= 1:2.10), libdb5.3, libelf1 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 3.1~), libtirpc3 (>= 1.0.2), libxtables12 (>= 1.6.0+snapshot20161117), libcap2-bin Recommends: libatm1 (>= 2.4.1-17~) Suggests: iproute2-doc, python3:any Conflicts: arpd, iproute (<< 20130000-1) Conffiles: /etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb /etc/iproute2/ematch_map 0e0f36cafc6a9cf76bc704cfd8f96ece /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f /etc/iproute2/nl_protos 393e42fa549d0974eb66d576675779c2 /etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f /etc/iproute2/rt_protos 35b7f1673d1d0486c4188fd06b46a410 /etc/iproute2/rt_protos.d/README 88e45597012c565f9a10ffef1bc14312 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463 /etc/iproute2/rt_tables.d/README 18bfdabbd4d5b14eae350720ea5ff431 Description: networking and traffic control tools The iproute2 suite is a collection of utilities for networking and traffic control. . These tools communicate with the Linux kernel via the (rt)netlink interface, providing advanced features not available through the legacy net-tools commands 'ifconfig' and 'route'. Homepage: https://wiki.linuxfoundation.org/networking/iproute2 Package: iptables Status: install ok installed Priority: optional Section: net Installed-Size: 2408 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Multi-Arch: foreign Version: 1.8.9-2 Replaces: iptables-nftables-compat (<< 1.6.2~) Depends: libip4tc2 (= 1.8.9-2), libip6tc2 (= 1.8.9-2), libxtables12 (= 1.8.9-2), netbase (>= 6.0), libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~), libnetfilter-conntrack3 (>= 1.0.6), libnfnetlink0 (>= 1.0.2), libnftnl11 (>= 1.1.5) Recommends: nftables Suggests: firewalld, kmod Breaks: iptables-nftables-compat (<< 1.6.2~) Description: administration tools for packet filtering and NAT The iptables/xtables framework has been replaced by nftables. You should consider migrating now. . iptables is the userspace command line program used to configure the Linux packet filtering and NAT ruleset. It is targeted towards systems and networks administrators. . This package contains several different utilities, the most important ones: . iptables-nft, iptables-nft-save, iptables-nft-restore (nft-based version) . iptables-legacy, iptables-legacy-save, iptables-legacy-restore (legacy version) . ip6tables-nft, ip6tables-nft-save, ip6tables-nft-restore (nft-based version) . ip6tables-legacy, ip6tables-legacy-save, ip6tables-legacy-restore (legacy version) . arptables-nft, arptables-nft-save, arptables-nft-restore (nft-based version) . ebtables-nft, ebtables-nft-save, ebtables-nft-restore (nft-based version) Homepage: https://www.netfilter.org/ Package: iputils-ping Status: install ok installed Priority: important Section: net Installed-Size: 121 Maintainer: Noah Meyerhans Architecture: amd64 Multi-Arch: foreign Source: iputils Version: 3:20221126-1+deb12u1 Provides: ping Depends: libcap2-bin, libc6 (>= 2.34), libcap2 (>= 1:2.10), libidn2-0 (>= 0.6) Description: Tools to test the reachability of network hosts The ping command sends ICMP ECHO_REQUEST packets to a host in order to test if the host is reachable via the network. . This package includes a ping6 utility which supports IPv6 network connections. Homepage: https://github.com/iputils/iputils/ Package: isc-dhcp-client Status: install ok installed Priority: important Section: net Installed-Size: 2857 Maintainer: Debian ISC DHCP Maintainers Architecture: amd64 Source: isc-dhcp Version: 4.4.3-P1-2 Provides: dhcp-client Depends: libc6 (>= 2.36), debianutils (>= 2.8.2), iproute2 Recommends: isc-dhcp-common Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns Conffiles: /etc/apparmor.d/sbin.dhclient 4b18441217660d94d1edd6341e0775d1 /etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5 /etc/dhcp/dhclient.conf 649563ef7a61912664a400a5263958a6 Description: DHCP client for automatically obtaining an IP address This is the Internet Software Consortium's DHCP client. . Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP (actually dhcpd includes much of the functionality of bootpd). It gives client machines "leases" for IP addresses and can automatically set their network configuration. If your machine depends on DHCP (especially likely if it's a workstation on a large network, or a laptop, or attached to a cable modem), keep this or another DHCP client installed. . Extra documentation can be found in the package isc-dhcp-common. . ISC has decided to stop maintaining the client and relay parts of isc-dhcp, and they will be removed after the 4.4.3 release, keeping only the server component. Please, consider using an alternative for isc-dhcp-client (dhclient). . More information can be found in the ISC official announcement: https://www.isc.org/blogs/dhcp-client-relay-eom/ Homepage: http://www.isc.org Package: isc-dhcp-common Status: install ok installed Priority: important Section: net Installed-Size: 122 Maintainer: Debian ISC DHCP Maintainers Architecture: amd64 Source: isc-dhcp Version: 4.4.3-P1-2 Depends: debianutils (>= 2.8.2) Description: common manpages relevant to all of the isc-dhcp packages This package includes manpages that are relevant to the various ISC DHCP packages. . The dhcp-options manpage describes available options for dhcpd and dhclient. The dhcp-eval manpage describes evaluation of conditional expressions. Homepage: http://www.isc.org Package: iso-codes Status: install ok installed Priority: optional Section: misc Installed-Size: 20086 Maintainer: Dr. Tobias Quathamer Architecture: all Multi-Arch: foreign Version: 4.15.0-1 Suggests: isoquery Description: ISO language, territory, currency, script codes and their translations This package provides the ISO 639, ISO 639-3, and ISO 639-5 language code lists, the ISO 4217 currency code list, the ISO 3166 territory code list, the ISO 3166-2 sub-territory list, and the ISO 15924 script code list as JSON files. . More importantly, it also provides their translations to be used by other programs. Homepage: https://salsa.debian.org/iso-codes-team/iso-codes Package: jellyfin Status: install ok installed Priority: optional Section: misc Installed-Size: 9 Maintainer: Jellyfin Packaging Team Architecture: all Version: 10.11.11+deb12 Depends: jellyfin-server, jellyfin-web, jellyfin-ffmpeg7 Description: Jellyfin is the Free Software Media System. This metapackage provides the core Jellyfin components from one name. Homepage: https://jellyfin.org Package: jellyfin-ffmpeg7 Status: install ok installed Priority: optional Section: video Installed-Size: 207615 Maintainer: Jellyfin Packaging Team Architecture: amd64 Multi-Arch: foreign Source: jellyfin-ffmpeg (7.1.4-3) Version: 7.1.4-3-bookworm Replaces: jellyfin-ffmpeg, jellyfin-ffmpeg5, jellyfin-ffmpeg6 Depends: libbluray2 (>= 1:0.2.2), libc6 (>= 2.35), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libgmp10 (>= 2:6.2.1+dfsg1), libgnutls30 (>= 3.7.5), libmp3lame0 (>= 3.100), libopenmpt0 (>= 0.3.0), libopus0 (>= 1.1), libpciaccess0, libstdc++6 (>= 12), libtheora0 (>= 1.0), libudev1 (>= 183), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvpx7 (>= 1.12.0), libwebp7 (>= 1.2.4), libwebpmux3 (>= 1.2.4), libx11-xcb1 (>= 2:1.8.4), libx264-164 (>= 2:0.164.3095+gitbaee400), libx265-199 (>= 3.5), libxcb-dri3-0 (>= 1.13), libxcb-present0, libxcb-randr0 (>= 1.13), libxcb-shm0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxshmfence1, libzstd1 (>= 1.5.2), libzvbi0 (>= 0.2.35), ocl-icd-libopencl1 | libopencl1, ocl-icd-libopencl1 (>= 1.0) | libopencl-1.2-1 Suggests: intel-opencl-icd, intel-opencl-icd-legacy Conflicts: jellyfin-ffmpeg, jellyfin-ffmpeg5, jellyfin-ffmpeg6 Description: Tools for transcoding, streaming and playing of multimedia files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This package contains a static build compatible with all Debian/Ubuntu releases, designed to facilitate Jellyfin on systems with an unpatched version of ffmpeg in their repository. Included files are: * ffmpeg: a command line tool to convert multimedia files between formats * ffprobe: a simple multimedia stream analyzer * vainfo: a command line tool to get information about local VA-API devices Homepage: https://ffmpeg.org/ Package: jellyfin-server Status: install ok installed Priority: optional Section: misc Installed-Size: 172365 Maintainer: Jellyfin Packaging Team Architecture: amd64 Source: jellyfin Version: 10.11.11+deb12 Depends: libfontconfig1, libjemalloc2, adduser, libicu72 Recommends: jellyfin-web, sudo, jellyfin-ffmpeg7 | ffmpeg Conffiles: /etc/default/jellyfin 4d12cf459ad66266123a9b214dd48d3a /etc/jellyfin/logging.json 316ca7a27838db18c05aee39c96cb29d /etc/systemd/system/jellyfin.service.d/jellyfin.service.conf 47cbe76685049dbcf3cd4ec555c7ca27 Description: Jellyfin is the Free Software Media System. This package provides the Jellyfin server backend and API. Homepage: https://jellyfin.org Package: jellyfin-web Status: install ok installed Priority: optional Section: misc Installed-Size: 56942 Maintainer: Jellyfin Packaging Team Architecture: all Source: jellyfin Version: 10.11.11+deb12 Recommends: jellyfin-server Conffiles: /usr/share/jellyfin/web/config.json e35e5341c3e179ae85dff5ea3664a242 Description: Jellyfin is the Free Software Media System. This package provides the Jellyfin web client. Homepage: https://jellyfin.org Package: jq Status: install ok installed Priority: optional Section: utils Installed-Size: 110 Maintainer: ChangZhuo Chen (陳昌倬) Architecture: amd64 Multi-Arch: foreign Version: 1.6-2.1+deb12u1 Depends: libjq1 (= 1.6-2.1+deb12u1), libc6 (>= 2.34) Description: lightweight and flexible command-line JSON processor jq is like sed for JSON data – you can use it to slice and filter and map and transform structured data with the same ease that sed, awk, grep and friends let you play with text. . It is written in portable C, and it has minimal runtime dependencies. . jq can mangle the data format that you have into the one that you want with very little effort, and the program to do so is often shorter and simpler than you’d expect. Homepage: https://github.com/stedolan/jq Package: kbd Status: install ok installed Priority: optional Section: utils Installed-Size: 1815 Maintainer: Console utilities maintainers Architecture: amd64 Source: kbd (2.5.1-1) Version: 2.5.1-1+b1 Provides: console-utilities Depends: libc6 (>= 2.34) Recommends: console-setup | console-data Conflicts: console-utilities Description: Linux console font and keytable utilities This package allows you to set up the Linux console, change the font, resize text mode virtual consoles and remap the keyboard. . You will probably want to install the “console-setup” package which sets up console font and keymap data files. Homepage: http://www.kbd-project.org/ Package: keyboard-configuration Status: install ok installed Priority: optional Section: utils Installed-Size: 2798 Maintainer: Debian Install System Team Architecture: all Multi-Arch: foreign Source: console-setup Version: 1.221 Replaces: console-setup (<< 1.47), console-setup-mini (<< 1.47) Depends: debconf (>= 0.5) | debconf-2.0, liblocale-gettext-perl, xkb-data (>= 2.35.1~), xkb-data (<< 2.35.1A) Pre-Depends: debconf | debconf-2.0 Breaks: console-setup (<< 1.71), console-setup-mini (<< 1.47) Description: system-wide keyboard preferences This package maintains the keyboard preferences in /etc/default/keyboard. Other packages can use the information provided by this package in order to configure the keyboard on the console or in X Window. Package: klibc-utils Status: install ok installed Priority: optional Section: libs Installed-Size: 569 Maintainer: Debian Kernel Team Architecture: amd64 Multi-Arch: foreign Source: klibc Version: 2.0.12-1 Depends: libklibc (= 2.0.12-1) Description: small utilities built with klibc for early boot This package contains a collection of programs that are linked against klibc. These duplicate some of the functionality of a regular Linux toolset, but are typically much smaller than their full-function counterparts. They are intended for inclusion in initramfs images and embedded systems. Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git Package: kmod Status: install ok installed Priority: important Section: admin Installed-Size: 251 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: foreign Version: 30+20221128-1 Depends: libc6 (>= 2.34), liblzma5 (>= 5.1.1alpha+20120614), libssl3 (>= 3.0.0), libzstd1 (>= 1.5.2), libkmod2 (= 30+20221128-1) Conffiles: /etc/init.d/kmod c5df572a7bc622632284b75441ee066e Description: tools for managing Linux kernel modules This package contains a set of programs for loading, inserting, and removing kernel modules for Linux. It replaces module-init-tools. Package: less Status: install ok installed Priority: important Section: text Installed-Size: 313 Maintainer: Milan Kupcevic Architecture: amd64 Multi-Arch: foreign Version: 590-2.1~deb12u2 Depends: libc6 (>= 2.34), libtinfo6 (>= 6) Description: pager program similar to more This package provides "less", a file pager (that is, a memory-efficient utility for displaying text one screenful at a time). Less has many more features than the basic pager "more". As part of the GNU project, it is widely regarded as the standard pager on UNIX-derived systems. . Also provided are "lessecho", a simple utility for ensuring arguments with spaces are correctly quoted; "lesskey", a tool for modifying the standard (vi-like) keybindings; and "lesspipe", a filter for specific types of input, such as .doc or .txt.gz files. Homepage: http://www.greenwoodsoftware.com/less/ Package: lf Status: install ok installed Priority: optional Section: utils Installed-Size: 3476 Maintainer: Debian Go Packaging Team Architecture: amd64 Source: lf (28-1) Version: 28-1+b3 Recommends: ueberzug Suggests: mediainfo | exiftool Description: terminal file manager written in Go lf (as in "list files") is a terminal file manager written in Go. It is heavily inspired by ranger with some missing and extra features. Some of the missing features are deliberately omitted since they are better handled by external tools. . Features: . - Single binary without any runtime dependencies (except terminfo database) - Fast startup and low memory footprint - Server/client architecture to share file selection between multiple instances - Configuration with shell commands - Customizable keybindings (vi and readline defaults) - Preview filtering (for source highlighting, archives, PDFs/images as text) Built-Using: golang-1.19 (= 1.19.8-2), golang-github-djherbis-times (= 1.5.0-1), golang-github-gdamore-encoding (= 1.0.0-3), golang-github-gdamore-tcell.v2 (= 2.5.4-1), golang-github-lucasb-eyer-go-colorful (= 1.2.0-1), golang-github-mattn-go-runewidth (= 0.0.14-1), golang-github-rivo-uniseg (= 0.4.2-1), golang-golang-x-sys (= 0.3.0-1), golang-golang-x-term (= 0.3.0-1), golang-golang-x-text (= 0.7.0-1) Homepage: https://github.com/gokcehan/lf Package: libabsl20220623 Status: install ok installed Priority: optional Section: libs Installed-Size: 1913 Maintainer: Benjamin Barenblat Architecture: amd64 Multi-Arch: same Source: abseil Version: 20220623.1-1+deb12u2 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11) Description: extensions to the C++ standard library Abseil is an open-source collection of C++ library code designed to augment the C++ standard library. The Abseil library code is collected from Google's C++ codebase and has been extensively tested and used in production. In some cases, Abseil provides pieces missing from the C++ standard; in others, Abseil provides alternatives to the standard for special needs. . This package contains Abseil's shared libraries. Homepage: https://abseil.io/ Package: libacl1 Status: install ok installed Priority: optional Section: libs Installed-Size: 73 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: acl Version: 2.3.1-3 Depends: libc6 (>= 2.33) Description: access control list - shared library This package contains the shared library containing the POSIX 1003.1e draft standard 17 functions for manipulating access control lists. Homepage: https://savannah.nongnu.org/projects/acl/ Package: libaio1 Status: install ok installed Priority: optional Section: libs Installed-Size: 37 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: libaio Version: 0.3.113-4 Depends: libc6 (>= 2.4) Description: Linux kernel AIO access library - shared library This library enables userspace to use Linux kernel asynchronous I/O system calls, important for the performance of databases and other advanced applications. . This package contains the shared library. Homepage: https://pagure.io/libaio Package: libaom3 Status: install ok installed Priority: optional Section: libs Installed-Size: 5546 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: aom Version: 3.6.0-1+deb12u2 Depends: libc6 (>= 2.34) Description: AV1 Video Codec Library AOMedia Video 1 (AV1) is an open and royalty free video encoding format optimized for the Internet and the successor of VP9. aom is the reference encoder and decoder implementation published by the Alliance for Open Media. . This package contains the shared library. Homepage: https://aomedia.googlesource.com/aom/ Package: libapache2-mod-php8.2 Status: install ok config-files Priority: optional Section: httpd Installed-Size: 5462 Maintainer: Debian PHP Maintainers Architecture: amd64 Source: php8.2 Version: 8.2.26-3+0~20241125.68+debian12~1.gbp153f1a Config-Version: 8.2.26-3+0~20241125.68+debian12~1.gbp153f1a Provides: libapache2-mod-php, php-json, php8.2-json, phpapi-20220829 Depends: media-types | mime-support, php8.2-cli, php8.2-common (= 8.2.26-3+0~20241125.68+debian12~1.gbp153f1a), php8.2-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin (>= 2.4.16), libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4) Recommends: apache2 Suggests: php-pear Conffiles: /etc/apache2/mods-available/php8.2.conf 002a0a2a5863242ae11e2d2d4dfcafe4 /etc/apache2/mods-available/php8.2.load c68f6273d32f252336bd75585aec958e Description: server-side, HTML-embedded scripting language (Apache 2 module) This package provides the PHP module for the Apache 2 webserver (as found in the apache2-mpm-prefork package). Please note that this package ONLY works with Apache's prefork MPM, as it is not compiled thread-safe. . The following extensions are built in: Core date filter hash json libxml openssl pcre random Reflection session sodium SPL standard zlib. . PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used open source general-purpose scripting language that is especially suited for web development and can be embedded into HTML. Homepage: http://www.php.net/ Package: libapache2-mod-php8.3 Status: install ok config-files Priority: optional Section: httpd Installed-Size: 5564 Maintainer: Debian PHP Maintainers Architecture: amd64 Source: php8.3 Version: 8.3.21-1+0~20250509.62+debian12~1.gbpd2ac5c Config-Version: 8.3.21-1+0~20250509.62+debian12~1.gbpd2ac5c Provides: libapache2-mod-php, php-json, php8.3-json, phpapi-20230831 Depends: media-types | mime-support, php8.3-cli, php8.3-common (= 8.3.21-1+0~20250509.62+debian12~1.gbpd2ac5c), php8.3-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin (>= 2.4.16), libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4) Recommends: apache2 Suggests: php-pear Conffiles: /etc/apache2/mods-available/php8.3.conf 002a0a2a5863242ae11e2d2d4dfcafe4 /etc/apache2/mods-available/php8.3.load 675353173fb98595cc8499d45385a31e Description: server-side, HTML-embedded scripting language (Apache 2 module) This package provides the PHP module for the Apache 2 webserver (as found in the apache2-mpm-prefork package). Please note that this package ONLY works with Apache's prefork MPM, as it is not compiled thread-safe. . The following extensions are built in: Core date filter hash json libxml openssl pcre random Reflection session sodium SPL standard zlib. . PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used open source general-purpose scripting language that is especially suited for web development and can be embedded into HTML. Homepage: http://www.php.net/ Package: libapparmor1 Status: install ok installed Priority: optional Section: libs Installed-Size: 109 Maintainer: Debian AppArmor Team Architecture: amd64 Multi-Arch: same Source: apparmor Version: 3.0.8-3 Replaces: libapparmor-perl (<< 3.0.3-3) Depends: libc6 (>= 2.34) Breaks: libapparmor-perl (<< 3.0.3-3) Description: changehat AppArmor library libapparmor1 provides a shared library one can compile programs against in order to use various AppArmor functionality, such as transitioning to a different AppArmor profile or hat. Homepage: https://apparmor.net/ Package: libappstream4 Status: install ok installed Priority: optional Section: libs Installed-Size: 656 Maintainer: Matthias Klumpp Architecture: amd64 Multi-Arch: same Source: appstream Version: 0.16.1-2 Depends: libc6 (>= 2.33), libcurl3-gnutls (>= 7.63.0), libglib2.0-0 (>= 2.67.3+git20210214), libstemmer0d (>= 0+svn527), libsystemd0 (>= 242), libxml2 (>= 2.9.0), libxmlb2 (>= 0.3.4), libyaml-0-2 Description: Library to access AppStream services AppStream is a metadata specification which permits software components to provide information about themselves to automated systems and end-users before the software is actually installed. This permits informative displays of new applications to users in software centers, as well as allowing a system to make decisions on which new software a user might want to install (e.g. missing firmware or media handlers). . This package contains a GObject-based library to access AppStream services, like the software component metadata pool. It also contains functions for reading, writing and transforming AppStream metadata. Homepage: https://www.freedesktop.org/wiki/Distributions/AppStream/ Package: libapr1 Status: install ok installed Priority: optional Section: libs Installed-Size: 288 Maintainer: Debian Apache Maintainers Architecture: amd64 Multi-Arch: same Source: apr Version: 1.7.2-3+deb12u1 Depends: libc6 (>= 2.34), libuuid1 (>= 2.16) Conflicts: libapr1.0 Description: Apache Portable Runtime Library APR is Apache's Portable Runtime Library, designed to be a support library that provides a predictable and consistent interface to underlying platform-specific implementations. Homepage: https://apr.apache.org/ Package: libaprutil1 Status: install ok installed Priority: optional Section: libs Installed-Size: 280 Maintainer: Debian Apache Maintainers Architecture: amd64 Multi-Arch: same Source: apr-util Version: 1.6.3-1 Depends: libapr1 (>= 1.6.2), libc6 (>= 2.25), libcrypt1 (>= 1:4.1.0), libdb5.3, libexpat1 (>= 2.0.1), libgdbm6 (>= 1.16), libssl3 (>= 3.0.0) Description: Apache Portable Runtime Utility Library APR is Apache's Portable Runtime Library, designed to be a support library that provides a predictable and consistent interface to underlying platform-specific implementations. . APR Util is a utilities library implemented on top of apr, providing database access, xml parsing, and other useful functionality. Homepage: https://apr.apache.org/ Package: libapt-pkg6.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 3297 Maintainer: APT Development Team Architecture: amd64 Multi-Arch: same Source: apt Version: 2.6.1 Provides: libapt-pkg (= 2.6.1) Depends: libbz2-1.0, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgcrypt20 (>= 1.10.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 11), libsystemd0 (>= 221), libudev1 (>= 183), libxxhash0 (>= 0.7.1), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.2.2.3) Recommends: apt (>= 2.6.1) Breaks: appstream (<< 0.9.0-3~), apt (<< 1.6~), aptitude (<< 0.8.9), dpkg (<< 1.20.8), libapt-inst1.5 (<< 0.9.9~) Description: package management runtime library This library provides the common functionality for searching and managing packages as well as information about packages. Higher-level package managers can depend upon this library. . This includes: * retrieval of information about packages from multiple sources * retrieval of packages and all dependent packages needed to satisfy a request either through an internal solver or by interfacing with an external one * authenticating the sources and validating the retrieved data * installation and removal of packages in the system * providing different transports to retrieve data over cdrom, ftp, http(s), rsh as well as an interface to add more transports like tor+http(s) (apt-transport-tor). Package: libargon2-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 56 Maintainer: Luca Bruno Architecture: amd64 Multi-Arch: same Source: argon2 Version: 0~20171227-0.3+deb12u1 Depends: libc6 (>= 2.34) Breaks: cryptsetup-initramfs (<< 2:2.6.1-2) Description: memory-hard hashing function - runtime library Argon2 is a password-hashing function that can be used to hash passwords for credential storage, key derivation, or other applications. . There are two main versions of Argon2: Argon2i and Argon2d. Argon2i is the safest against side-channel attacks, while Argon2d provides the highest resistance against GPU cracking attacks. . Argon2i and Argon2d are parametrized by: * A time cost, which defines the amount of computation realized and therefore the execution time, given in number of iterations * A memory cost, which defines the memory usage, given in kibibytes * A parallelism degree, which defines the number of parallel threads . This package includes the dynamic library against which programs are linked. Homepage: https://github.com/P-H-C/phc-winner-argon2 Package: libasan8 Status: install ok installed Priority: optional Section: libs Installed-Size: 8017 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 3.3) Description: AddressSanitizer -- a fast memory error detector AddressSanitizer (ASan) is a fast memory error detector. It finds use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs. Homepage: http://gcc.gnu.org/ Package: libasound2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1161 Maintainer: Debian ALSA Maintainers Architecture: amd64 Multi-Arch: same Source: alsa-lib (1.2.8-1) Version: 1.2.8-1+b1 Depends: libasound2-data (>= 1.2.8-1), libc6 (>= 2.34) Suggests: libasound2-plugins (>= 1.0.24) Breaks: alsa-utils (<< 1.2.1) Description: shared library for ALSA applications This package contains the ALSA library and its standard plugins, as well as the required configuration files. . ALSA is the Advanced Linux Sound Architecture. Homepage: https://www.alsa-project.org/ Package: libasound2-data Status: install ok installed Priority: optional Section: libs Installed-Size: 200 Maintainer: Debian ALSA Maintainers Architecture: all Multi-Arch: foreign Source: alsa-lib Version: 1.2.8-1 Replaces: libasound2 (<< 1.2.8-1) Recommends: alsa-ucm-conf, alsa-topology-conf Suggests: alsa-utils Breaks: libasound2 (<< 1.2.8-1) Description: Configuration files and profiles for ALSA drivers This package contains configuration files for ALSA drivers. . ALSA is the Advanced Linux Sound Architecture. Homepage: https://www.alsa-project.org/ Package: libass9 Status: install ok installed Priority: optional Section: libs Installed-Size: 253 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libass Version: 1:0.17.1-1 Depends: libc6 (>= 2.29), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.3.5), libfribidi0 (>= 1.0.0), libharfbuzz0b (>= 1.2.6) Description: library for SSA/ASS subtitles rendering SubStation Alpha (SSA) is a subtitle file format that allows more advanced subtitles than the conventional SRT and similar formats. . This package contains the shared library for libass. Homepage: https://github.com/libass/libass Package: libassuan0 Status: install ok installed Priority: optional Section: libs Installed-Size: 117 Maintainer: Debian GnuPG-Maintainers Architecture: amd64 Multi-Arch: same Source: libassuan Version: 2.5.5-5 Depends: libc6 (>= 2.34), libgpg-error0 (>= 1.33) Description: IPC library for the GnuPG components Libassuan is a small library implementing the so-called "Assuan protocol". This protocol is used for IPC between most newer GnuPG components. Both server and client side functions are provided. Homepage: https://www.gnupg.org/related_software/libassuan/index.html Package: libasyncns0 Status: install ok installed Priority: optional Section: libs Installed-Size: 40 Maintainer: Tanguy Ortolo Architecture: amd64 Multi-Arch: same Source: libasyncns (0.8-6) Version: 0.8-6+b3 Depends: libc6 (>= 2.34) Description: Asynchronous name service query library libasyncns is a C library for Linux/Unix for executing name service queries asynchronously. It is an asynchronous wrapper around getaddrinfo(3), getnameinfo(3), res_query(3) and res_search(3) from libc and libresolv. Homepage: http://0pointer.de/lennart/projects/libasyncns/ Package: libatomic1 Status: install ok installed Priority: optional Section: libs Installed-Size: 45 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.14) Description: support library providing __atomic built-in functions library providing __atomic built-in functions. When an atomic call cannot be turned into lock-free instructions, GCC will make calls into this library. Homepage: http://gcc.gnu.org/ Package: libattr1 Status: install ok installed Priority: optional Section: libs Installed-Size: 59 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: attr Version: 1:2.5.1-4 Depends: libc6 (>= 2.4) Conffiles: /etc/xattr.conf 743ca3f83ea263f1f56ad1f63f907bdb Description: extended attribute handling - shared library Contains the runtime environment required by programs that make use of extended attributes. Homepage: https://savannah.nongnu.org/projects/attr/ Package: libaudit-common Status: install ok installed Priority: optional Section: libs Installed-Size: 22 Maintainer: Laurent Bigonville Architecture: all Multi-Arch: foreign Source: audit Version: 1:3.0.9-1 Conffiles: /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2 Description: Dynamic library for security auditing - common files The audit-libs package contains the dynamic libraries needed for applications to use the audit framework. It is used to monitor systems for security related events. . This package contains the libaudit.conf configuration file and the associated manpage. Homepage: https://people.redhat.com/sgrubb/audit/ Package: libaudit1 Status: install ok installed Priority: optional Section: libs Installed-Size: 150 Maintainer: Laurent Bigonville Architecture: amd64 Multi-Arch: same Source: audit Version: 1:3.0.9-1 Depends: libaudit-common (>= 1:3.0.9-1), libc6 (>= 2.33), libcap-ng0 (>= 0.7.9) Description: Dynamic library for security auditing The audit-libs package contains the dynamic libraries needed for applications to use the audit framework. It is used to monitor systems for security related events. Homepage: https://people.redhat.com/sgrubb/audit/ Package: libavahi-client3 Status: install ok installed Priority: optional Section: libs Installed-Size: 117 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: avahi Version: 0.8-10+deb12u1 Depends: libavahi-common3 (= 0.8-10+deb12u1), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14) Description: Avahi client library Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains the library for Avahi's C API which allows you to integrate mDNS/DNS-SD functionality into your application. Homepage: https://avahi.org/ Package: libavahi-common-data Status: install ok installed Priority: optional Section: libs Installed-Size: 738 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: avahi Version: 0.8-10+deb12u1 Description: Avahi common data files Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains common data files for avahi. Homepage: https://avahi.org/ Package: libavahi-common3 Status: install ok installed Priority: optional Section: libs Installed-Size: 94 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: avahi Version: 0.8-10+deb12u1 Depends: libc6 (>= 2.34), libavahi-common-data (= 0.8-10+deb12u1) Description: Avahi common library Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains the Avahi common library, which is a set of common functions used by many of Avahis components and client applications. Homepage: https://avahi.org/ Package: libavahi-compat-libdnssd1 Status: install ok installed Priority: optional Section: libs Installed-Size: 82 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: avahi Version: 0.8-10+deb12u1 Depends: libavahi-client3 (= 0.8-10+deb12u1), libavahi-common3 (= 0.8-10+deb12u1), libc6 (>= 2.34) Recommends: libnss-mdns Description: Avahi Apple Bonjour compatibility library Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This library contains the Apple Bonjour compatibility library of Avahi. Homepage: https://avahi.org/ Package: libavc1394-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 62 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libavc1394 Version: 0.5.4-5 Depends: libc6 (>= 2.14), libraw1394-11 Description: control IEEE 1394 audio/video devices libavc1394 is a programming interface for the 1394 Trade Association AV/C (Audio/Video Control) Digital Interface Command Set. It allows you to remote control camcorders and similar devices connected to your computer via an IEEE 1394 (aka Firewire) link. . This package includes the libraries needed to run executables using libavc1394. Homepage: http://sourceforge.net/projects/libavc1394/ Package: libavcodec59 Status: install ok installed Priority: optional Section: libs Installed-Size: 14701 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: ffmpeg Version: 7:5.1.9-0+deb12u1 Depends: libaom3 (>= 3.2.0), libavutil57 (= 7:5.1.9-0+deb12u1), libc6 (>= 2.35), libcairo2 (>= 1.2.4), libcodec2-1.0 (>= 1.0.5), libdav1d6 (>= 0.9.0), libglib2.0-0 (>= 2.12.0), libgsm1 (>= 1.0.18), libjxl0.7 (>= 0.7.0), liblzma5 (>= 5.1.1alpha+20120614), libmfx1 (>= 18.4.0), libmp3lame0 (>= 3.100), libopenjp2-7 (>= 2.0.0), libopus0 (>= 1.1), librav1e0 (>= 0.5.1), librsvg2-2 (>= 2.14.4), libshine3 (>= 3.1.0), libsnappy1v5 (>= 1.1.9), libspeex1 (>= 1.2~), libsvtav1enc1 (>= 1.4.1+dfsg), libswresample4 (>= 7:5.0), libtheora0 (>= 1.0), libtwolame0 (>= 0.3.10), libva2 (>= 2.9.0), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvpx7 (>= 1.12.0), libwebp7 (>= 1.2.4), libwebpmux3 (>= 1.2.4), libx264-164 (>= 2:0.164.3095+gitbaee400), libx265-199 (>= 3.5), libxvidcore4 (>= 1.2.2), libzvbi0 (>= 0.2.35), zlib1g (>= 1:1.2.0) Suggests: libcuda1, libnvcuvid1, libnvidia-encode1 Description: FFmpeg library with de/encoders for audio/video codecs - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library provides a generic encoding/decoding framework and contains multiple decoders and encoders for audio, video and subtitle streams, and several bitstream filters. . The shared architecture provides various services ranging from bit stream I/O to DSP optimizations, and makes it suitable for implementing robust and fast codecs as well as for experimentation. . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libavdevice59 Status: install ok installed Priority: optional Section: libs Installed-Size: 300 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: ffmpeg Version: 7:5.1.9-0+deb12u1 Depends: libasound2 (>= 1.0.16), libavc1394-0 (>= 0.5.3), libavcodec59 (>= 7:5.0), libavfilter8 (>= 7:5.1), libavformat59 (= 7:5.1.9-0+deb12u1), libavutil57 (= 7:5.1.9-0+deb12u1), libc6 (>= 2.34), libcaca0 (>= 0.99.beta20), libcdio-cdda2 (>= 10.2+2.0.0), libcdio-paranoia2 (>= 10.2+2.0.0), libdc1394-25 (>= 2.2.6), libdrm2 (>= 2.4.101), libgl1, libiec61883-0 (>= 1.2.0), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libopenal1 (>= 1.14), libpulse0 (>= 0.99.1), libraw1394-11 (>= 2.1.2), libsdl2-2.0-0 (>= 2.0.12), libx11-6, libxcb-shape0, libxcb-shm0, libxcb-xfixes0, libxcb1, libxext6, libxv1 Description: FFmpeg library for handling input and output devices - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library provides a generic framework for grabbing from and rendering to many common multimedia input/output devices, and supports several input and output devices, including Video4Linux2, VfW, DShow, and ALSA. . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libavfilter8 Status: install ok installed Priority: optional Section: libs Installed-Size: 12411 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: ffmpeg Version: 7:5.1.9-0+deb12u1 Depends: libass9 (>= 1:0.13.6), libavcodec59 (= 7:5.1.9-0+deb12u1), libavformat59 (>= 7:5.0), libavutil57 (= 7:5.1.9-0+deb12u1), libbs2b0 (>= 3.1.0+dfsg), libc6 (>= 2.35), libflite1 (>= 1.4-release-9~), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libfribidi0 (>= 0.19.2), liblilv-0-0 (>= 0.14.2~dfsg0), libmfx1 (>= 18.4.0), libmysofa1 (>= 0.7~), libplacebo208 (>= 4.208.0), libpocketsphinx3 (>= 0.8+5prealpha+1), libpostproc56 (>= 7:5.0), librubberband2 (>= 3.1.2+dfsg0), libsphinxbase3 (>= 0.8+5prealpha), libstdc++6 (>= 11), libswresample4 (>= 7:5.1), libswscale6 (>= 7:5.0), libva2 (>= 1.7.3), libvidstab1.1, libzimg2 (>= 0.3.1), libzmq5 (>= 3.2.3+dfsg), ocl-icd-libopencl1 | libopencl1, ocl-icd-libopencl1 (>= 1.0) | libopencl-1.2-1, zlib1g (>= 1:1.1.4) Description: FFmpeg library containing media filters - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library provides a generic audio/video filtering framework containing several filters, sources and sinks. . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libavformat59 Status: install ok installed Priority: optional Section: libs Installed-Size: 2819 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: ffmpeg Version: 7:5.1.9-0+deb12u1 Depends: libavcodec59 (= 7:5.1.9-0+deb12u1), libavutil57 (= 7:5.1.9-0+deb12u1), libbluray2 (>= 1:0.2.2), libbz2-1.0, libc6 (>= 2.35), libchromaprint1 (>= 1.3.2), libgme0 (>= 0.5.5), libgnutls30 (>= 3.7.5), libopenmpt0 (>= 0.3.0), librabbitmq4 (>= 0.6.0), librist4 (>= 0.2.6+dfsg), libsrt1.5-gnutls (>= 1.5.1), libssh-gcrypt-4 (>= 0.8.0), libxml2 (>= 2.7.4), libzmq5 (>= 4.0.1+dfsg), zlib1g (>= 1:1.2.0.2) Description: FFmpeg library with (de)muxers for multimedia containers - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library provides a generic framework for multiplexing and demultiplexing (muxing and demuxing) audio, video and subtitle streams. It encompasses multiple muxers and demuxers for multimedia container formats. It also supports several input and output protocols to access a media resource. . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libavif15 Status: install ok installed Priority: optional Section: libs Installed-Size: 203 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libavif Version: 0.11.1-1+deb12u1 Depends: libaom3 (>= 3.2.0), libc6 (>= 2.14), libdav1d6 (>= 0.1.0), libgav1-1 (>= 0.18.0), librav1e0 (>= 0.5.1), libsvtav1enc1 (>= 1.4.1+dfsg), libyuv0 (>= 0.0~git20221206) Description: Library for handling .avif files This library aims to be a friendly, portable C implementation of the AV1 Image File Format as described in https://aomediacodec.github.io/av1-avif/. . This package provides the shared library files. Homepage: https://github.com/AOMediaCodec/libavif Package: libavutil57 Status: install ok installed Priority: optional Section: libs Installed-Size: 1031 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: ffmpeg Version: 7:5.1.9-0+deb12u1 Depends: libc6 (>= 2.35), libdrm2 (>= 2.4.66), libmfx1 (>= 18.4.0), libva-drm2 (>= 1.3), libva-x11-2 (>= 1.3), libva2 (>= 2.1.0), libvdpau1 (>= 0.2), libx11-6, ocl-icd-libopencl1 | libopencl1, ocl-icd-libopencl1 (>= 1.0) | libopencl-1.2-1 Description: FFmpeg library with functions for simplifying programming - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library is a utility library to aid portable multimedia programming. It contains safe portable string functions, random number generators, data structures, additional mathematics functions, cryptography and multimedia related functionality (like enumerations for pixel and sample formats). It is not a library for code needed by both libavcodec and libavformat. The goal for this library is to be modular, small, efficient and useful. . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libb-hooks-op-check-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 49 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Source: libb-hooks-op-check-perl (0.22-2) Version: 0.22-2+b1 Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.3) Description: Perl wrapper for OP check callbacks B::Hooks::OP::Check provides an interface for XS modules to hook into the callbacks of PL_check, which is part of perl's core. It allows a C function to be invoked as the last stage of optree compilation, depending on the given op code number (op_type). Homepage: https://metacpan.org/release/B-Hooks-OP-Check Package: libbinutils Status: install ok installed Priority: optional Section: devel Installed-Size: 2469 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: binutils Version: 2.40-2 Replaces: binutils (<< 2.29-6) Depends: libc6 (>= 2.34), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.2.0), binutils-common (= 2.40-2) Breaks: binutils (<< 2.29-6) Description: GNU binary utilities (private shared library) This package includes the private shared libraries libbfd and libopcodes. Homepage: https://www.gnu.org/software/binutils/ Package: libblas3 Status: install ok installed Priority: optional Section: libs Installed-Size: 464 Maintainer: Debian Science Team Architecture: amd64 Multi-Arch: same Source: lapack Version: 3.11.0-2 Provides: libblas.so.3 Depends: libc6 (>= 2.14) Description: Basic Linear Algebra Reference implementations, shared library BLAS (Basic Linear Algebra Subroutines) is a set of efficient routines for most of the basic vector and matrix operations. They are widely used as the basis for other high quality linear algebra software, for example lapack and linpack. This implementation is the Fortran 77 reference implementation found at netlib. . This package contains a shared version of the library. Homepage: https://www.netlib.org/lapack/ Package: libblkid1 Status: install ok installed Priority: optional Section: libs Installed-Size: 398 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.38.1-5+deb12u3 Depends: libc6 (>= 2.33) Description: block device ID library The blkid library allows system programs such as fsck and mount to quickly and easily find block devices by filesystem UUID or label. This allows system administrators to avoid specifying filesystems by hard-coded device names and use a logical naming system instead. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: libbluray2 Status: install ok installed Priority: optional Section: libs Installed-Size: 348 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libbluray Version: 1:1.3.4-1 Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libudfread0 (>= 1.1.1), libxml2 (>= 2.7.4) Recommends: libaacs0 Suggests: libbluray-bdj Description: Blu-ray disc playback support library (shared library) libbluray is an open-source library designed for Blu-Ray Discs playback for media players, like VLC or MPlayer. This research project is developed by an international team of developers from Doom9. libbluray integrates navigation, playlist parsing, menus, and BD-J. . NB: Most commercial Blu-Ray are restricted by AACS or BD+ technologies and this library is not enough to playback those discs. . This package provides the shared library. Homepage: https://www.videolan.org/developers/libbluray.html Package: libboost-iostreams1.74.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 2113 Maintainer: Debian Boost Team Architecture: amd64 Multi-Arch: same Source: boost1.74 Version: 1.74.0+ds1-21 Depends: libbz2-1.0, libc6 (>= 2.34), libgcc-s1 (>= 3.0), liblzma5 (>= 5.2.2), libstdc++6 (>= 5.2), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Description: Boost.Iostreams Library This package forms part of the Boost C++ Libraries collection. . Boost.Iostreams are a collection of concepts and a set of templates which turn models of these concepts into C++ standard library streams and stream buffers. Homepage: http://www.boost.org/libs/iostreams/ Package: libboost-python1.74.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 2268 Maintainer: Debian Boost Team Architecture: amd64 Source: boost1.74 Version: 1.74.0+ds1-21 Provides: libboost-python1.74.0-py311 Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.0), libstdc++6 (>= 11) Suggests: python3 Description: Boost.Python Library This package forms part of the Boost C++ Libraries collection. . The Boost Python Library is used to quickly and easily export a C++ library to Python such that the Python interface is very similar to the C++ interface. It is designed to be minimally intrusive on your C++ design. In most cases, you should not have to alter your C++ classes in any way in order to use them with Boost.Python. The system should simply "reflect" your C++ classes and functions into Python. The major features of Boost.Python include support for: Subclassing extension types in Python, Overriding virtual functions in Python, Member function Overloading, Automatic wrapping of numeric operators among others. . One of the python interpreter packages is required to use the created extensions. Homepage: http://www.boost.org/libs/python/ Package: libbpf1 Status: install ok installed Priority: optional Section: libs Installed-Size: 385 Maintainer: Sudip Mukherjee Architecture: amd64 Multi-Arch: same Source: libbpf (1.1.2-0+deb12u1) Version: 1:1.1.2-0+deb12u1 Depends: libc6 (>= 2.34), libelf1 (>= 0.144), zlib1g (>= 1:1.2.3.3) Description: eBPF helper library (shared library) libbpf is a library for loading eBPF programs and reading and manipulating eBPF objects from user-space. . This package contains the shared library. Package: libbrotli1 Status: install ok installed Priority: optional Section: libs Installed-Size: 783 Maintainer: Tomasz Buchert Architecture: amd64 Multi-Arch: same Source: brotli (1.0.9-2) Version: 1.0.9-2+b6 Depends: libc6 (>= 2.29) Description: library implementing brotli encoder and decoder (shared libraries) Brotli is a generic-purpose lossless compression algorithm that compresses data using a combination of a modern variant of the LZ77 algorithm, Huffman coding and 2nd order context modeling, with a compression ratio comparable to the best currently available general-purpose compression methods. It is similar in speed with deflate but offers more dense compression. . This package installs shared libraries. Homepage: https://github.com/google/brotli Package: libbs2b0 Status: install ok installed Priority: optional Section: libs Installed-Size: 41 Maintainer: Debian QA Group Architecture: amd64 Multi-Arch: same Source: libbs2b Version: 3.1.0+dfsg-7 Depends: libc6 (>= 2.29), libstdc++6 (>= 4.1.1) Description: Bauer stereophonic-to-binaural DSP library The Bauer stereophonic-to-binaural DSP (bs2b) is designed to improve headphone listening of stereo audio records. . Typical stereo recordings are made for listening with speakers. What's missing in headphones is the sound going from each channel to the opposite ear, arriving a short time later for the extra distance traveled, and with a bit of high frequency roll-off for the shadowing effect of the head. The time delay to the far ear should also be somewhat longer at low frequencies than at high frequencies. bs2b implements both of these ideas to transform stereophonic recordings for headphone listening. Homepage: https://bs2b.sourceforge.net/ Package: libbsd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 202 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: libbsd Version: 0.11.7-2 Depends: libc6 (>= 2.34), libmd0 (>= 1.0.3-2) Description: utility functions from BSD systems - shared library This library provides some C functions such as strlcpy() that are commonly available on BSD systems but not on others like GNU systems. . For a detailed list of the provided functions, please see the libbsd-dev package description. Homepage: https://libbsd.freedesktop.org/ Package: libbz2-1.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 106 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: same Source: bzip2 (1.0.8-5) Version: 1.0.8-5+b1 Depends: libc6 (>= 2.4) Description: high-quality block-sorting file compressor library - runtime This package contains libbzip2 which is used by the bzip2 compressor. . bzip2 is a freely available, patent free, data compressor. . bzip2 compresses files using the Burrows-Wheeler block-sorting text compression algorithm, and Huffman coding. Compression is generally considerably better than that achieved by more conventional LZ77/LZ78-based compressors, and approaches the performance of the PPM family of statistical compressors. . The archive file format of bzip2 (.bz2) is incompatible with that of its predecessor, bzip (.bz). Homepage: https://sourceware.org/bzip2/ Package: libc-bin Essential: yes Status: install ok installed Priority: required Section: libs Installed-Size: 2042 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: foreign Source: glibc Version: 2.36-9+deb12u14 Depends: libc6 (>> 2.36), libc6 (<< 2.37) Recommends: manpages Breaks: dh-lua (<< 27+nmu1~) Conffiles: /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6 Description: GNU C Library: Binaries This package contains utility programs related to the GNU C Library. . * getconf: query system configuration variables * getent: get entries from administrative databases * iconv, iconvconfig: convert between character encodings * ldd, ldconfig: print/configure shared library dependencies * locale, localedef: show/generate locale definitions * tzselect, zdump, zic: select/dump/compile time zones Homepage: https://www.gnu.org/software/libc/libc.html Package: libc-dev-bin Status: install ok installed Priority: optional Section: libdevel Installed-Size: 94 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: foreign Source: glibc Version: 2.36-9+deb12u14 Depends: libc6 (>> 2.36), libc6 (<< 2.37) Recommends: manpages, manpages-dev, libc-devtools (>> 2.36) Description: GNU C Library: Development binaries This package contains utility programs related to the GNU C Library development package. . * gencat: generate message catalogs Homepage: https://www.gnu.org/software/libc/libc.html Package: libc-l10n Status: install ok installed Priority: standard Section: localization Installed-Size: 4350 Maintainer: GNU Libc Maintainers Architecture: all Multi-Arch: foreign Source: glibc Version: 2.36-9+deb12u14 Description: GNU C Library: localization files This package contains the translation files for the GNU C library and utility programs. Homepage: https://www.gnu.org/software/libc/libc.html Package: libc6 Status: install ok installed Priority: optional Section: libs Installed-Size: 13001 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: same Source: glibc Version: 2.36-9+deb12u14 Replaces: libc6-amd64 Depends: libgcc-s1 Recommends: libidn2-0 (>= 2.0.5~) Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales, libnss-nis, libnss-nisplus Breaks: aide (<< 0.17.3-4+b3), busybox (<< 1.30.1-6), chrony (<< 4.2-3~), fakechroot (<< 2.19-3.5), firefox (<< 91~), firefox-esr (<< 91~), gnumach-image-1.8-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-486-dbg (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486-dbg (<< 2:1.8+git20210923~), hurd (<< 1:0.9.git20220301-2), ioquake3 (<< 1.36+u20200211.f2c61c1~dfsg-2~), iraf-fitsutil (<< 2018.07.06-4), libgegl-0.4-0 (<< 0.4.18), libtirpc1 (<< 0.2.3), locales (<< 2.36), locales-all (<< 2.36), macs (<< 2.2.7.1-3~), nocache (<< 1.1-1~), nscd (<< 2.36), openarena (<< 0.8.8+dfsg-4~), openssh-server (<< 1:8.1p1-5), python3-iptables (<< 1.0.0-2), r-cran-later (<< 0.7.5+dfsg-2), tinydns (<< 1:1.05-14), valgrind (<< 1:3.19.0-1~), wcc (<< 0.0.2+dfsg-3) Conffiles: /etc/ld.so.conf.d/x86_64-linux-gnu.conf d4e7a7b88a71b5ffd9e2644e71a0cfab Description: GNU C Library: Shared libraries Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. Homepage: https://www.gnu.org/software/libc/libc.html Package: libc6-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 11975 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: same Source: glibc Version: 2.36-9+deb12u14 Replaces: libc6 (<= 2.32-1) Provides: libc-dev (= 2.36-9+deb12u14) Depends: libc6 (= 2.36-9+deb12u14), libc-dev-bin (= 2.36-9+deb12u14), linux-libc-dev, libcrypt-dev, libnsl-dev, rpcsvc-proto Suggests: glibc-doc, manpages-dev Breaks: binutils (<< 2.38), catch (<< 1.12.2-0.1), heimdal-multidev (<= 7.7.0+dfsg-4), igblast (<= 1.19.0-1), libassimp-dev (<= 5.2.4~ds0-1), libasyncns-dev (<= 0.8-6+b2), libatm1-dev (<= 1:2.5.1-4), libaws20-dev (<= 20.2-2+b1), libboinc-app-dev (<= 7.20.2+dfsg-1), libbson-dev (<= 1.22.0-1), libc6-dev-amd64-cross (<< 2.36~), libcups2-dev (<= 2.4.2-1), libdeal.ii-dev (<= 9.4.0-1), libdkim-dev (<= 1:1.0.21-4+b2), libdolfin-dev-common (<= 2019.2.0~git20220407.d29e24d-5), libeckit-dev (<= 1.20.0-1), libfclib-dev (<= 3.1.0+dfsg-2), libfltk1.3-dev (<= 1.3.8-4+b1), libgcc-10-dev (<< 10-20200321-1~), libgcc-7-dev (<< 7.5.0-6~), libgcc-8-dev (<< 8.4.0-2~), libgcc-9-dev (<< 9.3.0-5~), libghc-resolv-dev (<= 0.1.2.0-3), libghc-resolv-prof (<= 0.1.2.0-3), libglib2.0-dev (<= 2.72.3-1), libgloox-dev (<= 1.0.24-2+b1), libhesiod-dev (<= 3.2.1-3.1+b1), libinfinity-0.7-dev (<= 0.7.2-1+b1), libinsighttoolkit4-dev (<= 4.13.3withdata-dfsg2-3+b1), libinsighttoolkit5-dev (<= 5.2.1-5+b1), libismrmrd-dev (<= 1.8.0-2), libldap-dev (<= 2.5.12+dfsg-2), liblog4cplus-dev (<= 2.0.7-1), libloudmouth1-dev (<= 1.5.4-1), libmgl-dev (<= 8.0.1-2), libmimalloc2.0 (<= 2.0.6+ds-1), libminc-dev (<= 2.4.03-5), libmongoc-dev (<= 1.22.1-1), libmrpt-ros1bridge-dev (<= 1:2.4.9+ds-4+b2), libmysqlclient-dev (<= 8.0.29-1), libnetcdf-dev (<= 1:4.9.0-3), libnetcdf-mpi-dev (<= 1:4.9.0-1), libnetcdf-pnetcdf-dev (<= 1:4.9.0-1), libnfsidmap-dev (<= 1:2.6.1-2), libns3-dev (<= 3.36.1+dfsg-4), libola-dev (<= 0.10.8.nojsmin-2), libopenafs-dev (<= 1.8.8.1-3), libopendkim-dev (<= 2.11.0~beta2-7), libopendmarc-dev (<= 1.4.2-1), libopenms-dev (<= 2.6.0+cleaned1-3+b1), libopenzwave1.6-dev (<= 1.6.1914+ds-1), libperl5.26 (<< 5.26.1-3), libpg-query-dev (<= 13-2.1.2-2), librbl-dev (<= 2.11.0~beta2-7), libre-dev (<= 1.1.0-1+b1), libshishi-dev (<= 1.0.2-11), libslurm-dev (<= 21.08.8.2-1), libsocksd0-dev (<= 1.4.2+dfsg-7+b4), libspf2-dev (<= 1.2.10-7.1+b1), libstrophe-dev (<= 0.12.1-2), libtaningia-dev (<= 0.2.2-2+b1), libtrilinos-amesos-dev (<= 13.2.0-3), libtrilinos-amesos2-dev (<= 13.2.0-3), libtrilinos-anasazi-dev (<= 13.2.0-3), libtrilinos-aztecoo-dev (<= 13.2.0-3), libtrilinos-belos-dev (<= 13.2.0-3), libtrilinos-epetra-dev (<= 13.2.0-3), libtrilinos-epetraext-dev (<= 13.2.0-3), libtrilinos-galeri-dev (<= 13.2.0-3), libtrilinos-ifpack-dev (<= 13.2.0-3), libtrilinos-ifpack2-dev (<= 13.2.0-3), libtrilinos-intrepid-dev (<= 13.2.0-3), libtrilinos-intrepid2-dev (<= 13.2.0-3), libtrilinos-isorropia-dev (<= 13.2.0-3), libtrilinos-kokkos-dev (<= 13.2.0-3), libtrilinos-kokkos-kernels-dev (<= 13.2.0-3), libtrilinos-komplex-dev (<= 13.2.0-3), libtrilinos-ml-dev (<= 13.2.0-3), libtrilinos-moertel-dev (<= 13.2.0-3), libtrilinos-muelu-dev (<= 13.2.0-3), libtrilinos-nox-dev (<= 13.2.0-3), libtrilinos-phalanx-dev (<= 13.2.0-3), libtrilinos-pike-dev (<= 13.2.0-3), libtrilinos-piro-dev (<= 13.2.0-3), libtrilinos-pliris-dev (<= 13.2.0-3), libtrilinos-rol-dev (<= 13.2.0-3), libtrilinos-rtop-dev (<= 13.2.0-3), libtrilinos-rythmos-dev (<= 13.2.0-3), libtrilinos-sacado-dev (<= 13.2.0-3), libtrilinos-shylu-dev (<= 13.2.0-3), libtrilinos-stokhos-dev (<= 13.2.0-3), libtrilinos-stratimikos-dev (<= 13.2.0-3), libtrilinos-teko-dev (<= 13.2.0-3), libtrilinos-teuchos-dev (<= 13.2.0-3), libtrilinos-thyra-dev (<= 13.2.0-3), libtrilinos-tpetra-dev (<= 13.2.0-3), libtrilinos-trilinoscouplings-dev (<= 13.2.0-3), libtrilinos-triutils-dev (<= 13.2.0-3), libtrilinos-xpetra-dev (<= 13.2.0-3), libtrilinos-zoltan2-dev (<= 13.2.0-3), libvbr-dev (<= 2.11.0~beta2-7), libvisp-dev (<= 3.5.0-2+b1), libvotca-dev (<= 2022-3), libvtk6-dev (<= 6.3.0+dfsg2-8.1+b1), libvtk7-dev (<= 7.1.1+dfsg2-10.2), open-vm-tools-dev (<= 2:12.0.5-2), pidgin-librvp (<= 0.9.7cvs-3), proftpd-dev (<= 1.3.7d+dfsg-2), python3.7 (<< 3.7.7-1+b1), python3.8 (<< 3.8.2-1+b1), slurm-wlm-basic-plugins-dev (<= 21.08.8.2-1) Conflicts: libc0.1-dev, libc0.3-dev, libc6.1-dev Description: GNU C Library: Development Libraries and Header Files Contains the symlinks, headers, and object files needed to compile and link programs which use the standard C library. Homepage: https://www.gnu.org/software/libc/libc.html Package: libcaca0 Status: install ok installed Priority: optional Section: libs Installed-Size: 903 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libcaca Version: 0.99.beta20-3 Depends: libc6 (>= 2.14), libncursesw6 (>= 6), libslang2 (>= 2.2.4), libstdc++6 (>= 4.1.1), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4) Description: colour ASCII art library libcaca is the Colour AsCii Art library. It provides high level functions for colour text drawing, simple primitives for line, polygon and ellipse drawing, as well as powerful image to text conversion routines. . This package contains the shared library for libcaca. Homepage: http://caca.zoy.org/wiki/libcaca Package: libcairo-gobject2 Status: install ok installed Priority: optional Section: libs Installed-Size: 178 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: cairo Version: 1.16.0-7 Depends: libcairo2 (= 1.16.0-7), libglib2.0-0 (>= 2.14.0) Description: Cairo 2D vector graphics library (GObject library) Cairo is a multi-platform library providing anti-aliased vector-based rendering for multiple target backends. . This package contains the GObject library, providing wrapper GObject types for all cairo types. Homepage: https://cairographics.org/ Package: libcairo2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1307 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: cairo Version: 1.16.0-7 Depends: libc6 (>= 2.35), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.9.1), libpixman-1-0 (>= 0.30.0), libpng16-16 (>= 1.6.2-1), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.6), libxext6, libxrender1, zlib1g (>= 1:1.1.4) Breaks: libwebkit2gtk-3.0-25 (<< 2.4.5-2~), libwebkitgtk-1.0-0 (<< 2.4.5-2~), libwebkitgtk-3.0-0 (<< 2.4.5-2~), weston (<< 1.5.0-3~) Description: Cairo 2D vector graphics library Cairo is a multi-platform library providing anti-aliased vector-based rendering for multiple target backends. Paths consist of line segments and cubic splines and can be rendered at any width with various join and cap styles. All colors may be specified with optional translucence (opacity/alpha) and combined using the extended Porter/Duff compositing algebra as found in the X Render Extension. . Cairo exports a stateful rendering API similar in spirit to the path construction, text, and painting operators of PostScript, (with the significant addition of translucence in the imaging model). When complete, the API is intended to support the complete imaging model of PDF 1.4. . This package contains the shared libraries. Homepage: https://cairographics.org/ Package: libcap-ng0 Status: install ok installed Priority: optional Section: libs Installed-Size: 65 Maintainer: Håvard F. Aasen Architecture: amd64 Multi-Arch: same Source: libcap-ng (0.8.3-1) Version: 0.8.3-1+b3 Depends: libc6 (>= 2.33) Description: alternate POSIX capabilities library This library implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . The libcap-ng library is intended to make programming with POSIX capabilities much easier than the traditional libcap library. . This package contains dynamic libraries for libcap-ng. Homepage: https://people.redhat.com/sgrubb/libcap-ng Package: libcap2 Status: install ok installed Priority: optional Section: libs Installed-Size: 95 Maintainer: Christian Kastner Architecture: amd64 Multi-Arch: same Source: libcap2 (1:2.66-4+deb12u3) Version: 1:2.66-4+deb12u3+b1 Depends: libc6 (>= 2.34) Description: POSIX 1003.1e capabilities (library) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains the shared library. Homepage: https://sites.google.com/site/fullycapable/ Package: libcap2-bin Status: install ok installed Priority: important Section: utils Installed-Size: 133 Maintainer: Christian Kastner Architecture: amd64 Multi-Arch: foreign Source: libcap2 (1:2.66-4+deb12u3) Version: 1:2.66-4+deb12u3+b1 Replaces: libcap-bin Depends: libc6 (>= 2.34), libcap2 (>= 1:2.63) Recommends: libpam-cap Breaks: libcap-bin Description: POSIX 1003.1e capabilities (utilities) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains additional utilities. Homepage: https://sites.google.com/site/fullycapable/ Package: libcbor0.8 Status: install ok installed Priority: optional Section: libs Installed-Size: 98 Maintainer: Vincent Bernat Architecture: amd64 Multi-Arch: same Source: libcbor (0.8.0-2) Version: 0.8.0-2+b1 Depends: libc6 (>= 2.14) Description: library for parsing and generating CBOR (RFC 7049) CBOR is a general-purpose schema-less binary data format, defined in RFC 7049. This package provides a C library for parsing and generating CBOR. The main features are: . - Complete RFC conformance - Robust C99 implementation - Layered architecture offers both control and convenience - Flexible memory management - No shared global state - threading friendly - Proper handling of UTF-8 - Full support for streams & incremental processing - Extensive documentation and test suite - No runtime dependencies, small footprint . This package contains the runtime library. Homepage: https://github.com/PJK/libcbor Package: libcc1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 136 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libstdc++6 (>= 5.2) Description: GCC cc1 plugin for GDB libcc1 is a plugin for GDB. Homepage: http://gcc.gnu.org/ Package: libcdio-cdda2 Status: install ok installed Priority: optional Section: libs Installed-Size: 55 Maintainer: Philippe SWARTVAGHER Architecture: amd64 Multi-Arch: same Source: libcdio-paranoia Version: 10.2+2.0.1-1 Depends: libc6 (>= 2.33), libcdio19 (>= 2.1.0) Description: library to read and control digital audio CDs This library is made to read and control digital audio CDs. It does not play such CDs, it only reads them digitally. As it uses libcdio as a backend, it supports the same kind of CDROM drives (and images) as libcdio. Homepage: https://www.gnu.org/software/libcdio/ Package: libcdio-paranoia2 Status: install ok installed Priority: optional Section: libs Installed-Size: 55 Maintainer: Philippe SWARTVAGHER Architecture: amd64 Multi-Arch: same Source: libcdio-paranoia Version: 10.2+2.0.1-1 Depends: libc6 (>= 2.14), libcdio-cdda2 (>= 10.2+2.0.0), libcdio19 (>= 2.1.0) Description: library to read digital audio CDs with error correction This library is made to read digital audio CDs, with error correction. It does its best to correct errors and jitter that happen when reading such discs. As it uses libcdio as a backend, it supports the same kind of CDROM drives (and images) as libcdio. Homepage: https://www.gnu.org/software/libcdio/ Package: libcdio19 Status: install ok installed Priority: optional Section: libs Installed-Size: 324 Maintainer: Gabriel F. T. Gomes Architecture: amd64 Multi-Arch: same Source: libcdio Version: 2.1.0-4 Depends: libc6 (>= 2.33) Description: library to read and control CD-ROM This library is to encapsulate CD-ROM reading and control. Applications wishing to be oblivious of the OS- and device-dependant properties of a CD-ROM can use this library. . Some support for disk image types like BIN/CUE and NRG is available, so applications that use this library also have the ability to read disc images as though they were CD's. Homepage: https://www.gnu.org/software/libcdio/ Package: libchromaprint1 Status: install ok installed Priority: optional Section: libs Installed-Size: 108 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: chromaprint (1.5.1-2) Version: 1.5.1-2+b1 Depends: libavcodec59 (>= 7:5.0), libavutil57 (>= 7:5.0), libc6 (>= 2.29), libgcc-s1 (>= 3.4), libstdc++6 (>= 11) Description: audio fingerprint library Chromaprint is a library for calculating audio fingerprints which are used by the Acoustid service. Its main purpose is to provide an accurate identifier for record tracks Homepage: https://acoustid.org/chromaprint Package: libcjson1 Status: install ok installed Priority: optional Section: libs Installed-Size: 60 Maintainer: Boyuan Yang Architecture: amd64 Multi-Arch: same Source: cjson Version: 1.7.15-1+deb12u4 Depends: libc6 (>= 2.14) Description: Ultralightweight JSON parser in ANSI C cJSON is a ultralightweight json parse. . It aims to be the dumbest possible parser that you can get your job done with. . It's a single file of C, and a single header file. . This package contains the shared libraries. Homepage: https://github.com/DaveGamble/cJSON Package: libclone-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 41 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Version: 0.46-1 Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.14) Description: module for recursively copying Perl datatypes The Clone module provides a clone() method which makes recursive copies of nested hash, array, scalar and reference types, including tied variables and objects. . It is faster (although less flexible) than Storable's dclone. Its functionality is _not_ serializing in-memory objects (i.e. as Data::Dumper or YAML::Dump do), but deep-copying them over to new in-memory structures. Homepage: https://metacpan.org/release/Clone Package: libcodec2-1.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 16473 Maintainer: A. Maitland Bottoms Architecture: amd64 Multi-Arch: same Source: codec2 Version: 1.0.5-1 Depends: libc6 (>= 2.32) Description: Codec2 runtime library Next-Generation Digital Voice for Two-Way Radio . Codec2 is an audio codec especially designed for compressing voice at very low bit-rates for applications such as digital voice radio. . This package contains the codec2 runtime library. Homepage: http://rowetel.com/codec2.html Package: libcom-err2 Status: install ok installed Priority: optional Section: libs Installed-Size: 55 Maintainer: Theodore Y. Ts'o Architecture: amd64 Multi-Arch: same Source: e2fsprogs (1.47.0-2) Version: 1.47.0-2+b2 Replaces: libcomerr2 (<< 1.43.9-1~) Provides: libcomerr2 (= 1.47.0-2+b2) Depends: libc6 (>= 2.17) Breaks: libcomerr2 (<< 1.43.9-1~) Description: common error description library libcomerr is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. Homepage: http://e2fsprogs.sourceforge.net Package: libcrypt-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 341 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: same Source: libxcrypt Version: 1:4.4.33-2 Replaces: libc6-dev (<< 2.29-4), libcrypt1-dev, libcrypt2-dev, manpages-dev (<< 5.01-1) Provides: libcrypt1-dev Depends: libcrypt1 (= 1:4.4.33-2) Breaks: libc6-dev (<< 2.29-4), manpages-dev (<< 5.01-1) Conflicts: libcrypt1-dev, libcrypt2-dev Description: libcrypt development files This package contains the files needed for developing applications that use libcrypt. Package: libcrypt-openssl-bignum-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 91 Maintainer: Debian Perl Group Architecture: amd64 Source: libcrypt-openssl-bignum-perl (0.09-2) Version: 0.09-2+b1 Depends: perl (>= 5.36.0-4), perl-openssl-abi-3, perlapi-5.36.0, libc6 (>= 2.4), libssl3 (>= 3.0.0) Description: Perl module to access OpenSSL multiprecision integer arithmetic libraries Presently, many though not all of the arithmetic operations that OpenSSL provides are exposed to Perl via Crypt::OpenSSL::Bignum. In addition, this module can be used to provide access to bignum values produced by other OpenSSL modules, such as key parameters from Crypt::OpenSSL::RSA. Homepage: http://perl-openssl.sourceforge.net/ Package: libcrypt-openssl-random-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 44 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Source: libcrypt-openssl-random-perl (0.15-3) Version: 0.15-3+b1 Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.4), libssl3 (>= 3.0.0) Description: module to access the OpenSSL pseudo-random number generator Crypt::OpenSSL::Random is a Perl module for accessing the OpenSSL pseudo-random number generator. Homepage: http://perl-openssl.sourceforge.net/ Package: libcrypt-openssl-rsa-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 84 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Source: libcrypt-openssl-rsa-perl (0.33-3) Version: 0.33-3+b1 Depends: libc6 (>= 2.4), libssl3 (>= 3.0.0), perl (>= 5.36.0-4), perl-openssl-abi-3, perlapi-5.36.0, libcrypt-openssl-bignum-perl, libcrypt-openssl-random-perl Description: module for RSA encryption using OpenSSL Crypt::OpenSSL::RSA is a Perl module that provides glue to the RSA functions in the OpenSSL library. It provides the following functionalities: create a key from a string, make a new key, save key to a string, save public portion of key to a string using format compatible with OpenSSL's command-line rsa tool, encrypt, decrypt, sign, verify, return the size in bytes of a key, check the validity of a key. Homepage: http://perl-openssl.sourceforge.net/ Package: libcrypt1 Protected: yes Status: install ok installed Priority: optional Section: libs Installed-Size: 233 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: same Source: libxcrypt Version: 1:4.4.33-2 Replaces: libc6 (<< 2.29-4) Depends: libc6 (>= 2.36) Conflicts: libpam0g (<< 1.4.0-10) Description: libcrypt shared library libxcrypt is a modern library for one-way hashing of passwords. It supports DES, MD5, NTHASH, SUNMD5, SHA-2-256, SHA-2-512, and bcrypt-based password hashes It provides the traditional Unix 'crypt' and 'crypt_r' interfaces, as well as a set of extended interfaces like 'crypt_gensalt'. Important: yes Package: libcryptsetup12 Status: install ok installed Priority: optional Section: libs Installed-Size: 563 Maintainer: Debian Cryptsetup Team Architecture: amd64 Multi-Arch: same Source: cryptsetup Version: 2:2.6.1-4~deb12u2 Depends: libargon2-1 (>= 0~20171227), libblkid1 (>= 2.24.2), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.97), libjson-c5 (>= 0.15), libssl3 (>= 3.0.0), libuuid1 (>= 2.16) Description: disk encryption support - shared library Cryptsetup provides an interface for configuring encryption on block devices (such as /home or swap partitions), using the Linux kernel device mapper target dm-crypt. It features integrated Linux Unified Key Setup (LUKS) support. . This package provides the libcryptsetup shared library. Homepage: https://gitlab.com/cryptsetup/cryptsetup Package: libctf-nobfd0 Status: install ok installed Priority: optional Section: devel Installed-Size: 301 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: binutils Version: 2.40-2 Replaces: libbinutils (<< 2.33.50.20191128-1~) Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.0) Breaks: libbinutils (<< 2.33.50.20191128-1~) Description: Compact C Type Format library (runtime, no BFD dependency) This package includes the libctf-nobfd shared library. The Compact C Type Format (CTF) is a way of representing information about a binary program Homepage: https://www.gnu.org/software/binutils/ Package: libctf0 Status: install ok installed Priority: optional Section: devel Installed-Size: 232 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: binutils Version: 2.40-2 Depends: libbinutils (= 2.40-2), libc6 (>= 2.33), zlib1g (>= 1:1.2.0) Description: Compact C Type Format library (runtime, BFD dependency) This package includes the libctf shared library. The Compact C Type Format (CTF) is a way of representing information about a binary program Homepage: https://www.gnu.org/software/binutils/ Package: libcurl3-gnutls Status: install ok installed Priority: optional Section: libs Installed-Size: 828 Maintainer: Alessandro Ghedini Architecture: amd64 Multi-Arch: same Source: curl Version: 7.88.1-10+deb12u14 Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.34), libgnutls30 (>= 3.7.5), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 0.6), libldap-2.5-0 (>= 2.5.4), libnettle8, libnghttp2-14 (>= 1.50.0), libpsl5 (>= 0.16.0), librtmp1 (>= 2.3), libssh2-1 (>= 1.7.0), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Recommends: ca-certificates Description: easy-to-use client-side URL transfer library (GnuTLS flavour) libcurl is an easy-to-use client-side URL transfer library, supporting DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP. . libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling and more! . libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported, fast, thoroughly documented and is already used by many known, big and successful companies and numerous applications. . SSL support is provided by GnuTLS. Homepage: https://curl.se/ Package: libcurl4 Status: install ok installed Priority: optional Section: libs Installed-Size: 840 Maintainer: Alessandro Ghedini Architecture: amd64 Multi-Arch: same Source: curl Version: 7.88.1-10+deb12u14 Replaces: libcurl3 Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 0.6), libldap-2.5-0 (>= 2.5.4), libnghttp2-14 (>= 1.50.0), libpsl5 (>= 0.16.0), librtmp1 (>= 2.3), libssh2-1 (>= 1.7.0), libssl3 (>= 3.0.0), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Recommends: ca-certificates Conflicts: libcurl3 Description: easy-to-use client-side URL transfer library (OpenSSL flavour) libcurl is an easy-to-use client-side URL transfer library, supporting DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP. . libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling and more! . libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported, fast, thoroughly documented and is already used by many known, big and successful companies and numerous applications. . SSL support is provided by OpenSSL. Homepage: https://curl.se/ Package: libcwidget4 Status: install ok installed Priority: optional Section: libs Installed-Size: 1141 Maintainer: Manuel A. Fernandez Montecelo Architecture: amd64 Multi-Arch: same Source: cwidget Version: 0.5.18-6 Depends: libc6 (>= 2.33), libgcc-s1 (>= 3.0), libncursesw6 (>= 6.0+20180210), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 11), libtinfo6 (>= 6.0+20180210) Suggests: libcwidget-dev Description: high-level terminal interface library for C++ (runtime files) libcwidget is a modern user interface library modeled on GTK+ and Qt, but using curses as its display layer and with widgets that are tailored to a terminal environment. . This package contains the files that are required to run programs compiled against libcwidget. Homepage: https://salsa.debian.org/cwidget-team/ Package: libdata-optlist-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 31 Maintainer: Debian Perl Group Architecture: all Version: 0.113-1 Depends: perl:any, libparams-util-perl, libsub-install-perl Description: module to parse and validate simple name/value option pairs Data::OptList is a Perl module useful for working with simple name-and-value option pairs. It assumes any defined scalar is a name and any reference after it is its value. Homepage: https://metacpan.org/release/Data-OptList Package: libdatrie1 Status: install ok installed Priority: optional Section: libs Installed-Size: 82 Maintainer: Theppitak Karoonboonyanan Architecture: amd64 Multi-Arch: same Source: libdatrie (0.2.13-2) Version: 0.2.13-2+b1 Depends: libc6 (>= 2.14) Description: Double-array trie library This package provides shared libraries needed to run programs that use the datrie library. It is usually automatically installed. Homepage: https://linux.thai.net/projects/libthai Package: libdav1d6 Status: install ok installed Priority: optional Section: libs Installed-Size: 1616 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: dav1d Version: 1.0.0-2+deb12u1 Depends: libc6 (>= 2.34) Description: fast and small AV1 video stream decoder (shared library) dav1d is an AOMedia Video 1 (AV1) cross-platform decoder and focused on speed and correctness. . dav1d supports the following features: * support for all features of the AV1 bitstream * support for all bitdepth, 8, 10 and 12bits * support for all chroma subsamplings 4:2:0, 4:2:2, 4:4:4 and grayscale * full acceleration for AVX-2 chips * full acceleration for SSSE3+ chips * full acceleration for ARMv8 chips * partial acceleration for ARMv7 chips . This package provides the shared library. Homepage: https://www.videolan.org/projects/dav1d.html Package: libdb5.3 Status: install ok installed Priority: optional Section: libs Installed-Size: 1833 Maintainer: Bastian Germann Architecture: amd64 Multi-Arch: same Source: db5.3 Version: 5.3.28+dfsg2-1 Depends: libc6 (>= 2.34) Description: Berkeley v5.3 Database Libraries [runtime] This is the runtime package for programs that use the v5.3 Berkeley database library. Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html Package: libdbus-1-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 468 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: dbus Version: 1.14.10-1~deb12u1 Depends: libc6 (>= 2.34), libsystemd0 Recommends: dbus Description: simple interprocess messaging system (library) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . D-Bus supports broadcast messages, asynchronous messages (thus decreasing latency), authentication, and more. It is designed to be low-overhead; messages are sent using a binary protocol, not using XML. D-Bus also supports a method call mapping for its messages, but it is not required; this makes using the system quite simple. . It comes with several bindings, including GLib, Python, Qt and Java. . The message bus daemon can be found in the dbus-daemon package. Homepage: https://dbus.freedesktop.org/ Package: libdc1394-25 Status: install ok installed Priority: optional Section: libs Installed-Size: 278 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libdc1394 Version: 2.2.6-4 Depends: libc6 (>= 2.29), libraw1394-11 (>= 2.1.2), libusb-1.0-0 (>= 2:1.0.9) Description: high level programming interface for IEEE 1394 digital cameras libdc1394 is a library that is intended to provide a high level programming interface for application developers who wish to control IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specification (found at http://www.1394ta.org/). . This version of libdc1394 supports both the old and new (juju) FireWire stack. It automatically detects which one to use at runtime. . This package contains shared libraries. Homepage: https://sourceforge.net/projects/libdc1394/ Package: libde265-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 470 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libde265 Version: 1.0.11-1+deb12u2 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11) Description: Open H.265 video codec implementation libde265 is an open source implementation of the H.265 video codec. It is written from scratch in plain C for simplicity and efficiency. Its simple API makes it easy to integrate it into other software. Homepage: https://github.com/strukturag/libde265 Package: libdebconfclient0 Status: install ok installed Priority: optional Section: libs Installed-Size: 37 Maintainer: Debian Install System Team Architecture: amd64 Multi-Arch: same Source: cdebconf Version: 0.270 Depends: libc6 (>= 2.4) Description: Debian Configuration Management System (C-implementation library) Debconf is a configuration management system for Debian packages. It is used by some packages to prompt you for information before they are installed. cdebconf is a reimplementation of the original debconf in C. . This library allows C programs to interface with cdebconf. Package: libdecor-0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 62 Maintainer: Debian SDL packages maintainers Architecture: amd64 Multi-Arch: same Source: libdecor-0 Version: 0.1.1-2 Replaces: libdecor Depends: libc6 (>= 2.34), libwayland-client0 (>= 1.20.0) Recommends: libdecor-0-plugin-1-cairo | libdecor-0-plugin-1 Conflicts: libdecor Description: client-side window decoration library libdecor is a library that can help Wayland clients draw window decorations for them. It aims to provide multiple backends that implements the decoration drawing. . This package contains the runtime library. Homepage: https://gitlab.freedesktop.org/libdecor/libdecor Package: libdeflate0 Status: install ok installed Priority: optional Section: libs Installed-Size: 161 Maintainer: Debian Med Packaging Team Architecture: amd64 Multi-Arch: same Source: libdeflate Version: 1.14-1 Depends: libc6 (>= 2.14) Description: fast, whole-buffer DEFLATE-based compression and decompression The supported formats are: * DEFLATE (raw) * zlib (a.k.a. DEFLATE with a zlib wrapper) * gzip (a.k.a. DEFLATE with a gzip wrapper) . libdeflate is heavily optimized. It is significantly faster than the zlib library, both for compression and decompression, and especially on x86 processors. In addition, libdeflate provides optional high compression modes that provide a better compression ratio than the zlib's "level 9". Homepage: https://github.com/ebiggers/libdeflate Package: libdevel-callchecker-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 55 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Version: 0.008-2 Depends: libb-hooks-op-check-perl, libdynaloader-functions-perl, perl (>= 5.36.0-4), perlapi-5.36.0 Description: custom op checking attached to subroutines Devel::CallChecker makes some new features of the Perl 5.14.0 C API available to XS modules running on older versions of Perl. The features are centred around the function cv_set_call_checker, which allows XS code to attach a magical annotation to a Perl subroutine, resulting in resolvable calls to that subroutine being mutated at compile time by arbitrary C code. This module makes cv_set_call_checker and several supporting functions available. (It is possible to achieve the effect of cv_set_call_checker from XS code on much earlier Perl versions, but it is painful to achieve without the centralised facility.) Homepage: https://metacpan.org/release/Devel-CallChecker Package: libdevmapper-event1.02.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: Debian LVM Team Architecture: amd64 Multi-Arch: same Source: lvm2 (2.03.16-2) Version: 2:1.02.185-2 Depends: libc6 (>= 2.33), libdevmapper1.02.1 (>= 2:1.02.97) Description: Linux Kernel Device Mapper event support library The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but software raid, and other drivers that create "virtual" block devices. . This package contains the userspace library to help with event monitoring for devmapper devices, in conjunction with the dmevent daemon. Homepage: https://sourceware.org/lvm2/ Package: libdevmapper1.02.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 474 Maintainer: Debian LVM Team Architecture: amd64 Multi-Arch: same Source: lvm2 (2.03.16-2) Version: 2:1.02.185-2 Depends: libc6 (>= 2.33), libselinux1 (>= 3.1~), libudev1 (>= 183), dmsetup (>= 2:1.02.185-2~) Description: Linux Kernel Device Mapper userspace library The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but software raid, and other drivers that create "virtual" block devices. . This package contains the (user-space) shared library for accessing the device-mapper; it allows usage of the device-mapper through a clean, consistent interface (as opposed to through kernel ioctls). Homepage: https://sourceware.org/lvm2/ Package: libdigest-hmac-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 27 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 1.04+dfsg-2 Depends: perl:any Description: module for creating standard message integrity checks HMAC is used for message integrity checks between two parties that share a secret key, and works in combination with some other Digest algorithm, usually MD5 or SHA-1. The HMAC mechanism is described in RFC 2104. . The Digest::HMAC module follow the common Digest:: interface, but the constructor takes the secret key and the name of some other simple Digest:: module as argument. Homepage: https://metacpan.org/release/Digest-HMAC Package: libdouble-conversion3 Status: install ok installed Priority: optional Section: libs Installed-Size: 104 Maintainer: Debian Science Team Architecture: amd64 Multi-Arch: same Source: double-conversion Version: 3.2.1-1 Depends: libc6 (>= 2.4), libgcc-s1 (>= 3.0), libstdc++6 (>= 4.1.1) Description: routines to convert IEEE floats to and from strings This library provides routines to convert IEEE single and double floats to and from string representations. It offers at lot of flexibility with respect to the conversion format: shortest, fixed, precision or exponential representation; decimal, octal or hexadecimal basis; control over number of digits, leading/trailing zeros and spaces. . The library consists of efficient conversion routines that have been extracted from the V8 JavaScript engine. The code has been refactored and improved so that it can be used more easily in other projects. . This package contains a shared version of the library. Homepage: https://github.com/google/double-conversion Package: libdpkg-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 1987 Maintainer: Dpkg Developers Architecture: all Multi-Arch: foreign Source: dpkg Version: 1.21.23 Depends: perl:any, dpkg (>= 1.18.11) Recommends: libfile-fcntllock-perl, liblocale-gettext-perl, bzip2, xz-utils (>= 5.4.0) Suggests: debian-keyring, gnupg | sq | sqop | pgpainless-cli, gpgv | sq | sqop | pgpainless-cli, gcc | c-compiler, binutils, patch, sensible-utils, git, bzr Breaks: dgit (<< 3.13~), libsop-java-java (<< 4.0.7~), pgpainless-cli (<< 1.3.13~), pkg-kde-tools (<< 0.15.28~), sq (<< 0.25.0~), sqop (<< 0.27.2~) Description: Dpkg perl modules This package provides the perl modules used by the scripts in dpkg-dev. They cover a wide range of functionality. Among them there are the following public modules: . - Dpkg: core variables - Dpkg::Arch: architecture handling functions - Dpkg::BuildFlags: set, modify and query compilation build flags - Dpkg::BuildInfo: build information functions - Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS - Dpkg::BuildProfiles: parse and manipulate build profiles - Dpkg::Changelog: parse changelogs - Dpkg::Changelog::Entry: represents a changelog entry - Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog - Dpkg::Checksums: generate and parse checksums - Dpkg::Compression: simple database of available compression methods - Dpkg::Compression::FileHandle: transparently (de)compress files - Dpkg::Compression::Process: wrapper around compression tools - Dpkg::Conf: parse dpkg configuration files - Dpkg::Control: parse and manipulate Debian control information (.dsc, .changes, Packages/Sources entries, etc.) - Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog - Dpkg::Control::Fields: manage (list of known) control fields - Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields - Dpkg::Control::Info: parse files like debian/control - Dpkg::Control::Tests: parse files like debian/tests/control - Dpkg::Control::Tests::Entry: represents a debian/tests/control stanza - Dpkg::Deps: parse and manipulate dependencies - Dpkg::Deps::Simple: represents a single dependency statement - Dpkg::Deps::Multiple: base module to represent multiple dependencies - Dpkg::Deps::Union: list of unrelated dependencies - Dpkg::Deps::AND: list of AND dependencies - Dpkg::Deps::OR: list of OR dependencies - Dpkg::Deps::KnownFacts: list of installed and virtual packages - Dpkg::Exit: push, pop and run exit handlers - Dpkg::Gettext: wrapper around Locale::gettext - Dpkg::IPC: spawn sub-processes and feed/retrieve data - Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for example) - Dpkg::Interface::Storable: base object serializer - Dpkg::Path: common path handling functions - Dpkg::Source::Format: manipulate debian/source/format files - Dpkg::Source::Package: extract Debian source packages - Dpkg::Substvars: substitute variables in strings - Dpkg::Vendor: identify current distribution vendor - Dpkg::Version: parse and manipulate Debian package versions . All the packages listed in Suggests or Recommends are used by some of the modules. Homepage: https://wiki.debian.org/Teams/Dpkg Package: libdrm-amdgpu1 Status: install ok installed Priority: optional Section: libs Installed-Size: 76 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libdrm (2.4.114-1) Version: 2.4.114-1+b1 Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.108) Description: Userspace interface to amdgpu-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libdrm-common Status: install ok installed Priority: optional Section: libs Installed-Size: 42 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: libdrm Version: 2.4.114-1 Description: Userspace interface to kernel DRM services -- common files This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. . This package provides common files for libdrm. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libdrm-intel1 Status: install ok installed Priority: optional Section: libs Installed-Size: 178 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libdrm (2.4.114-1) Version: 2.4.114-1+b1 Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.108), libpciaccess0 Description: Userspace interface to intel-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libdrm-nouveau2 Status: install ok installed Priority: optional Section: libs Installed-Size: 74 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libdrm (2.4.114-1) Version: 2.4.114-1+b1 Depends: libc6 (>= 2.14), libdrm2 (>= 2.4.108) Description: Userspace interface to nouveau-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libdrm-radeon1 Status: install ok installed Priority: optional Section: libs Installed-Size: 83 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libdrm (2.4.114-1) Version: 2.4.114-1+b1 Depends: libc6 (>= 2.4), libdrm2 (>= 2.4.108) Description: Userspace interface to radeon-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libdrm2 Status: install ok installed Priority: optional Section: libs Installed-Size: 121 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libdrm (2.4.114-1) Version: 2.4.114-1+b1 Depends: libdrm-common (>= 2.4.114-1), libc6 (>= 2.33) Description: Userspace interface to kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. . This package provides the runtime environment for libdrm. Homepage: https://cgit.freedesktop.org/mesa/drm/ Package: libduktape207 Status: install ok installed Priority: optional Section: libs Installed-Size: 314 Maintainer: Debian IoT Maintainers Architecture: amd64 Multi-Arch: same Source: duktape Version: 2.7.0-2 Depends: libc6 (>= 2.29) Description: embeddable Javascript engine, library Duktape is an embeddable Javascript engine, with a focus on portability and compact footprint. . Duktape is easy to integrate into a C/C++ project: add duktape.c, duktape.h, and duk_config.h to your build, and use the Duktape API to call Ecmascript functions from C code and vice versa. . This package contains the shared library. Homepage: https://duktape.org Package: libdw1 Status: install ok installed Priority: optional Section: libs Installed-Size: 713 Maintainer: Debian Elfutils Maintainers Architecture: amd64 Multi-Arch: same Source: elfutils Version: 0.188-2.1 Depends: libbz2-1.0, libc6 (>= 2.34), libelf1 (= 0.188-2.1), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.2.3) Description: library that provides access to the DWARF debug information libdw1 provides a library that provides access to DWARF debug information stored inside ELF files. . This library is part of elfutils. Homepage: https://sourceware.org/elfutils/ Package: libdynaloader-functions-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 33 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 0.003-3 Depends: perl:any Description: deconstructed dynamic C library loading DynaLoader::Functions provides a function-based interface to dynamic loading as used by Perl. Some details of dynamic loading are very platform-dependent, so correct use of these functions requires the programmer to be mindful of the space of platform variations. Homepage: https://metacpan.org/release/DynaLoader-Functions Package: libeatmydata1 Status: install ok installed Priority: optional Section: libs Installed-Size: 39 Maintainer: Mattia Rizzolo Architecture: amd64 Multi-Arch: same Source: libeatmydata (130-2) Version: 130-2+b1 Replaces: eatmydata (<< 82-1) Depends: libc6 (>= 2.34) Breaks: eatmydata (<< 82-1) Description: Library and utilities to disable fsync and friends - shared library This package contains the actual LD_PRELOAD library (libeatmydata) supporting the operation of the eatmydata package. Users typically want to use or depend on the eatmydata package instead of this one, so see its description for further information. Homepage: https://www.flamingspork.com/projects/libeatmydata/ Package: libedit2 Status: install ok installed Priority: optional Section: libs Installed-Size: 258 Maintainer: LLVM Packaging Team Architecture: amd64 Multi-Arch: same Source: libedit Version: 3.1-20221030-2 Replaces: libedit-dev (<< 3.1-20180525-2~) Depends: libbsd0 (>= 0.1.3), libc6 (>= 2.33), libtinfo6 (>= 6) Description: BSD editline and history libraries Command line editor library provides generic line editing, history, and tokenization functions. . It slightly resembles GNU readline. Homepage: https://www.thrysoee.dk/editline/ Package: libefiboot1 Status: install ok installed Priority: optional Section: libs Installed-Size: 117 Maintainer: Debian UEFI Maintainers Architecture: amd64 Multi-Arch: same Source: efivar Version: 37-6 Depends: libc6 (>= 2.14), libefivar1 (>= 37) Breaks: efibootmgr (<< 0.12-2) Description: Library to manage UEFI variables Library to allow for the manipulation of UEFI variables related to booting. Homepage: https://github.com/rhinstaller/efivar Package: libefivar1 Status: install ok installed Priority: optional Section: libs Installed-Size: 170 Maintainer: Debian UEFI Maintainers Architecture: amd64 Multi-Arch: same Source: efivar Version: 37-6 Depends: libc6 (>= 2.14) Breaks: efibootmgr (<< 0.12-2) Description: Library to manage UEFI variables Library to allow for the simple manipulation of UEFI variables. Homepage: https://github.com/rhinstaller/efivar Package: libelf1 Status: install ok installed Priority: optional Section: libs Installed-Size: 1036 Maintainer: Debian Elfutils Maintainers Architecture: amd64 Multi-Arch: same Source: elfutils Version: 0.188-2.1 Depends: libc6 (>= 2.34), zlib1g (>= 1:1.1.4) Description: library to read and write ELF files The libelf1 package provides a shared library which allows reading and writing ELF files on a high level. Third party programs depend on this package to read internals of ELF files. The programs of the elfutils package use it also to generate new ELF files. . This library is part of elfutils. Homepage: https://sourceware.org/elfutils/ Package: libepoxy0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1356 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libepoxy Version: 1.5.10-1 Depends: libc6 (>= 2.7) Description: OpenGL function pointer management library It hides the complexity of dlopen(), dlsym(), glXGetProcAddress(), eglGetProcAddress(), etc. from the app developer, with very little knowledge needed on their part. They get to read GL specs and write code using undecorated function names like glCompileShader(). Homepage: https://github.com/anholt/libepoxy Package: liberror-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 73 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 0.17029-2 Depends: perl:any Description: Perl module for error/exception handling in an OO-ish way The Error module provides two interfaces. Firstly "Error" provides a procedural interface to exception handling. Secondly "Error" is a base class for errors/exceptions that can either be thrown, for subsequent catch, or can simply be recorded. . Errors in the class "Error" should not be thrown directly, but the user should throw errors from a sub-class of "Error". . Warning: Using the "Error" module is no longer recommended due to the black-magical nature of its syntactic sugar, which often tends to break. Its maintainers have stopped actively writing code that uses it, and discourage people from doing so. . Recommended alternatives are Exception::Class (libexception-class-perl), Error::Exception (not packaged), TryCatch (libtrycatch-perl), and Try::Tiny (libtry-tiny-perl). Homepage: https://metacpan.org/release/Error Package: libevent-2.1-7 Status: install ok installed Priority: optional Section: libs Installed-Size: 435 Maintainer: Nicolas Mora Architecture: amd64 Multi-Arch: same Source: libevent Version: 2.1.12-stable-8 Depends: libc6 (>= 2.36) Description: Asynchronous event notification library Libevent is an asynchronous event notification library that provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. . It is meant to replace the asynchronous event loop found in event driven network servers. Currently, libevent supports /dev/poll, kqueue(2), event ports, select(2), poll(2) and epoll(4). . For backward compatibility and to transition to "libevent_core only" or "libevent_core + libevent_extra", the libevent source package builds the libevent library that includes everything in libevent_core and libevent_extra. Homepage: https://libevent.org/ Package: libevent-core-2.1-7 Status: install ok installed Priority: optional Section: libs Installed-Size: 302 Maintainer: Nicolas Mora Architecture: amd64 Multi-Arch: same Source: libevent Version: 2.1.12-stable-8 Depends: libc6 (>= 2.36) Description: Asynchronous event notification library (core) Libevent is an asynchronous event notification library that provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. . It is meant to replace the asynchronous event loop found in event driven network servers. Currently, libevent supports /dev/poll, kqueue(2), event ports, select(2), poll(2) and epoll(4). . The libevent_core library includes event loops, timers, buffer code, and various small compatibility functions. . If you're writing software that only uses libevent's event loop, you should link against only the libevent_core library. Homepage: https://libevent.org/ Package: libexpat1 Status: install ok installed Priority: optional Section: libs Installed-Size: 388 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: expat Version: 2.5.0-1+deb12u2 Depends: libc6 (>= 2.36) Description: XML parsing C library - runtime library This package contains the runtime, shared library of expat, the C library for parsing XML. Expat is a stream-oriented parser in which an application registers handlers for things the parser might find in the XML document (like start tags). Homepage: https://libexpat.github.io/ Package: libexpat1-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 817 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: expat Version: 2.5.0-1+deb12u2 Provides: libexpat-dev Depends: libexpat1 (= 2.5.0-1+deb12u2), libc6-dev | libc-dev Conflicts: libexpat-dev Description: XML parsing C library - development kit This package contains the header file and development libraries of expat, the C library for parsing XML. Expat is a stream oriented XML parser. This means that you register handlers with the parser prior to starting the parse. These handlers are called when the parser discovers the associated structures in the document being parsed. A start tag is an example of the kind of structures for which you may register handlers. Homepage: https://libexpat.github.io/ Package: libext2fs2 Status: install ok installed Priority: optional Section: libs Installed-Size: 535 Maintainer: Theodore Y. Ts'o Architecture: amd64 Multi-Arch: same Source: e2fsprogs (1.47.0-2) Version: 1.47.0-2+b2 Replaces: e2fslibs (<< 1.43.9-1~) Provides: e2fslibs (= 1.47.0-2+b2) Depends: libc6 (>= 2.34) Breaks: e2fslibs (<< 1.43.9-1~) Description: ext2/ext3/ext4 file system libraries The ext2, ext3 and ext4 file systems are successors of the original ext ("extended") file system. They are the main file system types used for hard disks on Debian and other Linux systems. . This package provides the ext2fs and e2p libraries, for userspace software that directly accesses extended file systems. Programs that use libext2fs include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include dumpe2fs, chattr, and lsattr. Homepage: http://e2fsprogs.sourceforge.net Package: libexttextcat-2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 46 Maintainer: Debian LibreOffice Maintainers Architecture: amd64 Multi-Arch: same Source: libexttextcat Version: 3.4.5-1 Depends: libc6 (>= 2.14), libexttextcat-data (= 3.4.5-1) Description: Language detection library Libexttextcat is a library with functions that implement the classification technique described in Cavnar & Trenkle, "N-Gram-Based Text Categorization". It was primarily developed for language guessing, a task on which it is known to perform with near-perfect accuracy. Homepage: https://wiki.documentfoundation.org/Libexttextcat Package: libexttextcat-data Status: install ok installed Priority: optional Section: text Installed-Size: 501 Maintainer: Debian LibreOffice Maintainers Architecture: all Multi-Arch: foreign Source: libexttextcat Version: 3.4.5-1 Description: Language detection library - data files Libexttextcat is a library with functions that implement the classification technique described in Cavnar & Trenkle, "N-Gram-Based Text Categorization". It was primarily developed for language guessing, a task on which it is known to perform with near-perfect accuracy. . This package provides the libtextcat data files. Homepage: https://wiki.documentfoundation.org/Libexttextcat Package: libfcgi0ldbl Status: install ok installed Priority: optional Section: libs Installed-Size: 85 Maintainer: Boris Pek Architecture: amd64 Multi-Arch: same Source: libfcgi Version: 2.4.2-2+deb12u1 Replaces: libfcgi0, libfcgi0c2 Provides: libfcgi Depends: libc6 (>= 2.15), libgcc-s1 (>= 3.0), libstdc++6 (>= 5) Recommends: libfcgi-bin (= 2.4.2-2+deb12u1) Conflicts: libfcgi0, libfcgi0c2 Description: shared library of FastCGI FastCGI is a language independent, scalable, open extension to CGI that provides high performance without the limitations of server specific APIs. . This package contains the shared libraries. Homepage: https://github.com/FastCGI-Archives Package: libfdisk1 Status: install ok installed Priority: optional Section: libs Installed-Size: 533 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.38.1-5+deb12u3 Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.33), libuuid1 (>= 2.16) Description: fdisk partitioning library The libfdisk library is used for manipulating partition tables. It is the core of the fdisk, cfdisk, and sfdisk tools. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: libffi8 Status: install ok installed Priority: optional Section: libs Installed-Size: 68 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: libffi Version: 3.4.4-1 Replaces: libffi8ubuntu1 (<< 3.4.2-1) Provides: libffi8ubuntu1 (= 3.4.4-1) Depends: libc6 (>= 2.34) Breaks: libffi8ubuntu1 (<< 3.4.2-1) Description: Foreign Function Interface library runtime A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language. Homepage: https://sourceware.org/libffi/ Package: libfftw3-double3 Status: install ok installed Priority: optional Section: libs Installed-Size: 2259 Maintainer: Debian Science Maintainers Architecture: amd64 Multi-Arch: same Source: fftw3 Version: 3.3.10-1 Depends: libc6 (>= 2.34), libgomp1 (>= 4.9) Suggests: libfftw3-bin, libfftw3-dev Description: Library for computing Fast Fourier Transforms - Double precision The FFTW library computes Fast Fourier Transforms (FFT) in one or more dimensions. It is extremely fast. This package contains the shared library for double precision transforms. . To get the static library and the header files, you need to install libfftw3-dev. For documentation, see libfftw3-doc. Homepage: https://fftw.org Package: libfido2-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 241 Maintainer: Debian Authentication Maintainers Architecture: amd64 Multi-Arch: same Source: libfido2 (1.12.0-2) Version: 1.12.0-2+b1 Depends: libc6 (>= 2.36), libcbor0.8 (>= 0.8.0), libssl3 (>= 3.0.0), libudev1 (>= 183), zlib1g (>= 1:1.1.4) Description: library for generating and verifying FIDO 2.0 objects A library for communicating with a FIDO device over USB or NFC, and for verifying attestation and assertion signatures. FIDO U2F (CTAP 1) and FIDO 2.0 (CTAP 2) are supported. . This package contains the library. Homepage: https://developers.yubico.com/libfido2/ Package: libflac12 Status: install ok installed Priority: optional Section: libs Installed-Size: 458 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: flac Version: 1.4.2+ds-2 Depends: libc6 (>= 2.33), libogg0 (>= 1.0rc3) Description: Free Lossless Audio Codec - runtime C library FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC is similar to MP3, but lossless. The FLAC project consists of: . * The stream format * libFLAC, which implements a reference encoder, stream decoder, and file decoder * flac, which is a command-line wrapper around libFLAC to encode and decode .flac files * Input plugins for various music players (Winamp, XMMS, and more in the works) . This package contains the runtime library libFLAC. Homepage: https://xiph.org/flac/ Package: libflite1 Status: install ok installed Priority: optional Section: libs Installed-Size: 27554 Maintainer: Debian Accessibility Team Architecture: amd64 Multi-Arch: same Source: flite Version: 2.2-5 Depends: libasound2 (>= 1.0.16), libc6 (>= 2.33) Description: Small run-time speech synthesis engine - shared libraries Flite is a small fast run-time speech synthesis engine. It is the latest addition to the suite of free software synthesis tools including University of Edinburgh's Festival Speech Synthesis System and Carnegie Mellon University's FestVox project, tools, scripts and documentation for building synthetic voices. However, flite itself does not require either of these systems to run. . It currently only supports the English and Indic languages. . This package contains the shared library objects of Festival Lite Homepage: http://cmuflite.org Package: libfontconfig1 Status: install ok installed Priority: optional Section: libs Installed-Size: 579 Maintainer: Debian freedesktop.org maintainers Architecture: amd64 Multi-Arch: same Source: fontconfig Version: 2.14.1-4 Provides: libfontconfig Depends: libc6 (>= 2.33), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.9.1), fontconfig-config (>= 2.14.1-4) Breaks: xpdf (<= 3.03-11) Description: generic font configuration library - runtime Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . This package contains the runtime library needed to launch applications using fontconfig. Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/ Package: libfreetype6 Status: install ok installed Priority: optional Section: libs Installed-Size: 886 Maintainer: Hugh McMaster Architecture: amd64 Multi-Arch: same Source: freetype Version: 2.12.1+dfsg-5+deb12u4 Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.33), libpng16-16 (>= 1.6.2-1), zlib1g (>= 1:1.1.4) Description: FreeType 2 font engine, shared library files The FreeType project is a team of volunteers who develop free, portable and high-quality software solutions for digital typography. They specifically target embedded systems and focus on providing small, efficient and ubiquitous products. . The FreeType 2 library is their new software font engine. It has been designed to provide the following important features: * A universal and simple API to manage font files * Support for several font formats through loadable modules * High-quality anti-aliasing * High portability & performance . Supported font formats include: * TrueType files (.ttf) and collections (.ttc) * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format * Type 1 Multiple Master fonts. The FreeType 2 API also provides routines to manage design instances easily * Type 1 CID-keyed fonts * OpenType/CFF (.otf) fonts * CFF/Type 2 fonts * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with the Adobe SVG viewer plugin. * Windows FNT/FON bitmap fonts . This package contains the files needed to run programs that use the FreeType 2 library. Homepage: https://freetype.org Package: libfribidi0 Status: install ok installed Priority: optional Section: libs Installed-Size: 172 Maintainer: Debian Hebrew Packaging Team Architecture: amd64 Multi-Arch: same Source: fribidi Version: 1.0.8-2.1 Depends: libc6 (>= 2.3.4) Description: Free Implementation of the Unicode BiDi algorithm FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic languages. This package contains the shared libraries. Homepage: http://www.fribidi.org/ Package: libfstrm0 Status: install ok installed Priority: optional Section: libs Installed-Size: 70 Maintainer: Robert Edmonds Architecture: amd64 Multi-Arch: same Source: fstrm Version: 0.6.1-1 Depends: libc6 (>= 2.32) Description: Frame Streams (fstrm) library Frame Streams is a light weight, binary clean protocol that allows for the transport of arbitrarily encoded data payload sequences with minimal framing overhead -- just four bytes per data frame. Frame Streams does not specify an encoding format for data frames and can be used with any data serialization format that produces byte sequences, such as Protocol Buffers, XML, JSON, MessagePack, YAML, etc. Frame Streams can be used as both a streaming transport over a reliable byte stream socket (TCP sockets, TLS connections, AF_UNIX sockets, etc.) for data in motion as well as a file format for data at rest. A "Content Type" header identifies the type of payload being carried over an individual Frame Stream and allows cooperating programs to determine how to interpret a given sequence of data payloads. . This is the "fstrm" implementation of Frame Streams in C. . This package contains the shared library. Homepage: https://github.com/farsightsec/fstrm Package: libfuse2 Status: install ok installed Priority: optional Section: libs Installed-Size: 345 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: fuse (2.9.9-6) Version: 2.9.9-6+b1 Depends: libc6 (>= 2.34) Suggests: fuse Conflicts: fuse (<< 2.9.9-6+b1) Description: Filesystem in Userspace (library) Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. . This package contains the shared library. Homepage: https://github.com/libfuse/libfuse/wiki Package: libfuse3-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 305 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: fuse3 Version: 3.14.0-4 Depends: libc6 (>= 2.34) Suggests: fuse3 Description: Filesystem in Userspace (library) (3.x version) Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. . This package contains the shared library. Homepage: https://github.com/libfuse/libfuse/wiki Package: libgav1-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 945 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libgav1 (0.18.0-1) Version: 0.18.0-1+b1 Depends: libabsl20220623 (>= 0~20220623.0-1), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 12) Description: AV1 decoder developed by Google -- runtime library This package contains the runtime, shared library of gav1. Gav1 is a new decoder implementation for AV1 video encoding format (supporting profiles 0 and 1). Homepage: https://chromium.googlesource.com/codecs/libgav1/ Package: libgbm1 Status: install ok installed Priority: optional Section: libs Installed-Size: 107 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 22.3.6-1+deb12u1 Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.75), libexpat1 (>= 2.0.1), libwayland-server0 (>= 1.15.0) Description: generic buffer management API -- runtime This package contains the GBM buffer management library. It provides a mechanism for allocating buffers for graphics rendering tied to Mesa. . GBM is intended to be used as a native platform for EGL on drm or openwfd. Homepage: https://mesa3d.org/ Package: libgc1 Status: install ok installed Priority: optional Section: libs Installed-Size: 400 Maintainer: Christoph Egger Architecture: amd64 Multi-Arch: same Source: libgc Version: 1:8.2.2-3 Replaces: libgc1c2 Depends: libc6 (>= 2.34), libstdc++6 (>= 4.1.1) Conflicts: libgc1c2 Description: conservative garbage collector for C and C++ Boehm-Demers-Weiser's GC is a garbage collecting storage allocator that is intended to be used as a plug-in replacement for C's malloc or C++'s new(). . It allows you to allocate memory basically as you normally would without explicitly deallocating memory that is no longer useful. The collector automatically recycles memory when it determines that it can no longer be used. . This version of the collector is thread safe, has C++ support and uses the defaults for everything else. However, it does not work as a drop-in malloc(3) replacement. Homepage: https://www.hboehm.info/gc/ Package: libgcc-12-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 14284 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Replaces: libtsan2 (<< 12-20211113-2~) Depends: gcc-12-base (= 12.2.0-14+deb12u1), libgcc-s1 (>= 12.2.0-14+deb12u1), libgomp1 (>= 12.2.0-14+deb12u1), libitm1 (>= 12.2.0-14+deb12u1), libatomic1 (>= 12.2.0-14+deb12u1), libasan8 (>= 12.2.0-14+deb12u1), liblsan0 (>= 12.2.0-14+deb12u1), libtsan2 (>= 12.2.0-14+deb12u1), libubsan1 (>= 12.2.0-14+deb12u1), libquadmath0 (>= 12.2.0-14+deb12u1) Recommends: libc6-dev (>= 2.23-1~) Breaks: libtsan2 (<< 12-20211113-2~) Description: GCC support library (development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Homepage: http://gcc.gnu.org/ Package: libgcc-s1 Protected: yes Status: install ok installed Priority: optional Section: libs Installed-Size: 140 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Replaces: libgcc1 (<< 1:10) Provides: libgcc1 (= 1:12.2.0-14+deb12u1) Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.35) Description: GCC support library Shared version of the support library, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some languages. Homepage: http://gcc.gnu.org/ Important: yes Package: libgcrypt20 Status: install ok installed Priority: optional Section: libs Installed-Size: 1592 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Version: 1.10.1-3+deb12u1 Depends: libc6 (>= 2.34), libgpg-error0 (>= 1.27) Suggests: rng-tools Description: LGPL Crypto library - runtime library libgcrypt contains cryptographic functions. Many important free ciphers, hash algorithms and public key signing algorithms have been implemented: . Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED, Poly1305, Camellia, ChaCha20, IDEA, Salsa, SM4, Blake-2, CRC, MD2, MD4, MD5, RIPE-MD160, SM3, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384, SHA3-512, SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC (Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.) Homepage: https://directory.fsf.org/project/libgcrypt/ Package: libgd3 Status: install ok installed Priority: optional Section: libs Installed-Size: 449 Maintainer: GD Team Architecture: amd64 Multi-Arch: same Source: libgd2 Version: 2.3.3-13+0~20260506.19+debian12~1.gbp4c9a22 Depends: libavif15 (>= 0.11.1), libc6 (>= 2.29), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libheif1 (>= 1.3.2), libimagequant0 (>= 2.11.10), libjpeg62-turbo (>= 1.3.1), libpng16-16 (>= 1.6.2-1), libtiff6 (>= 4.0.3), libwebp7 (>= 1.2.4), libxpm4 Suggests: libgd-tools Description: GD Graphics Library GD is a graphics library. It allows your code to quickly draw images complete with lines, arcs, text, multiple colours, cut and paste from other images, flood fills, and write out the result as a PNG file. This is particularly useful in World Wide Web applications, where PNG is one of the formats accepted for inline images by most browsers. . This is the runtime package of the library. Homepage: https://libgd.github.io/ Package: libgdbm-compat4 Status: install ok installed Priority: optional Section: libs Installed-Size: 70 Maintainer: Nicolas Mora Architecture: amd64 Multi-Arch: same Source: gdbm Version: 1.23-3 Depends: libc6 (>= 2.33), libgdbm6 (>= 1.16) Description: GNU dbm database routines (legacy support runtime version) GNU dbm ('gdbm') is a library of database functions that use extendible hashing and works similarly to the standard UNIX 'dbm' functions. . The basic use of 'gdbm' is to store key/data pairs in a data file, thus providing a persistent version of the 'dictionary' Abstract Data Type ('hash' to perl programmers). This package includes library files, required to run old programs, that use legacy 'dbm' interface. For new programs, please use modern interface, provided by libgdbm6 and libgdbm-dev. Homepage: https://gnu.org/software/gdbm Package: libgdbm6 Status: install ok installed Priority: optional Section: libs Installed-Size: 129 Maintainer: Nicolas Mora Architecture: amd64 Multi-Arch: same Source: gdbm Version: 1.23-3 Depends: libc6 (>= 2.34) Suggests: gdbm-l10n (= 1.23-3) Description: GNU dbm database routines (runtime version) GNU dbm ('gdbm') is a library of database functions that use extendible hashing and works similarly to the standard UNIX 'dbm' functions. . The basic use of 'gdbm' is to store key/data pairs in a data file, thus providing a persistent version of the 'dictionary' Abstract Data Type ('hash' to perl programmers). Homepage: https://gnu.org/software/gdbm Package: libgdk-pixbuf-2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 477 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: gdk-pixbuf Version: 2.42.10+dfsg-1+deb12u4 Replaces: libgdk-pixbuf2.0-0 (<< 2.40.0+dfsg-6~) Depends: libgdk-pixbuf2.0-common (>= 2.42.10+dfsg-1+deb12u4), shared-mime-info, libc6 (>= 2.34), libglib2.0-0 (>= 2.59.0), libjpeg62-turbo (>= 1.3.1), libpng16-16 (>= 1.6.2-1), libtiff6 (>= 4.0.3) Recommends: libgdk-pixbuf2.0-bin Breaks: libgdk-pixbuf2.0-0 (<< 2.40.0+dfsg-6~) Description: GDK Pixbuf library The GDK Pixbuf library provides: - Image loading and saving facilities. - Fast scaling and compositing of pixbufs. - Simple animation loading (ie. animated GIFs) Homepage: https://www.gtk.org/ Package: libgdk-pixbuf2.0-common Status: install ok installed Priority: optional Section: libs Installed-Size: 2516 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: gdk-pixbuf Version: 2.42.10+dfsg-1+deb12u4 Description: GDK Pixbuf library - data files This package contains the common files and translations for the GDK Pixbuf library. Homepage: https://www.gtk.org/ Package: libgeoip1 Status: install ok installed Priority: optional Section: libs Installed-Size: 279 Maintainer: Patrick Matthäi Architecture: amd64 Multi-Arch: same Source: geoip Version: 1.6.12-10 Depends: libc6 (>= 2.33) Recommends: geoip-database Suggests: geoip-bin Description: non-DNS IP-to-country resolver library GeoIP is a C library that enables the user to find the country that any IP address or hostname originates from. It uses a file based database. . This database simply contains IP blocks as keys, and countries as values and it should be more complete and accurate than using reverse DNS lookups. . This package contains the shared library. Homepage: https://www.maxmind.com/ Package: libgetopt-long-descriptive-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 78 Maintainer: Debian Perl Group Architecture: all Version: 0.111-1 Depends: perl:any, libio-stringy-perl, libparams-validate-perl, libsub-exporter-perl Breaks: libmoosex-getopt-perl (<< 0.75), libmousex-getopt-perl (<< 0.38-2~) Description: module that handles command-line arguments with usage text Getopt::Long::Descriptive is a convenience wrapper for Getopt::Long, which allows one to easily define options in the same familiar way, while also supporting custom descriptions for program usage output. Homepage: https://metacpan.org/release/Getopt-Long-Descriptive Package: libgfortran5 Status: install ok installed Priority: optional Section: libs Installed-Size: 2923 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 4.3), libquadmath0 (>= 4.6) Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2) Description: Runtime library for GNU Fortran applications Library needed for GNU Fortran applications linked against the shared library. Homepage: http://gcc.gnu.org/ Package: libgirepository-1.0-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 295 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: gobject-introspection Version: 1.74.0-3 Provides: libgirepository-1.0-1-with-libffi8 (= 1.74.0-3) Depends: libc6 (>= 2.29), libffi8 (>= 3.4), libglib2.0-0 (>= 2.74.0) Breaks: libcjs0 (<< 4.8.2-1+b1), libgjs0g (<< 1.68.4-1+b1), libglib-object-introspection-perl (<< 0.049-1+b2), python-gi (<< 3.42.0-1+b1), python3-gi (<< 3.42.0-1+b1), ruby-gobject-introspection (<< 3.4.3-1+b2) Description: Library for handling GObject introspection data (runtime library) GObject Introspection is a project for providing machine readable introspection data of the API of C libraries. This introspection data can be used in several different use cases, for example automatic code generation for bindings, API verification and documentation generation. . GObject Introspection contains tools to generate and handle the introspection data. . This package contains a C library for handling the introspection data. Homepage: https://wiki.gnome.org/GObjectIntrospection Package: libgit2-1.5 Status: install ok installed Priority: optional Section: libs Installed-Size: 1234 Maintainer: Utkarsh Gupta Architecture: amd64 Multi-Arch: same Source: libgit2 Version: 1.5.1+ds-1+deb12u1 Depends: libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libhttp-parser2.9 (>= 2.1), libmbedcrypto7 (>= 2.28.0), libmbedtls14 (>= 2.28.0), libmbedx509-1 (>= 2.28.0), libpcre2-8-0 (>= 10.22), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4) Description: low-level Git library libgit2 is a portable, pure C implementation of the Git distributed version control system core methods provided as a re-entrant link-able library with a solid API. Homepage: https://libgit2.github.com/ Package: libgit2-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 3409 Maintainer: Utkarsh Gupta Architecture: amd64 Multi-Arch: same Source: libgit2 Version: 1.5.1+ds-1+deb12u1 Depends: libgit2-1.5 (= 1.5.1+ds-1+deb12u1), zlib1g-dev, libmbedtls-dev, libssh2-1-dev, libhttp-parser-dev, libpcre2-dev Description: low-level Git library (development files) libgit2 is a portable, pure C implementation of the Git distributed version control system core methods provided as a re-entrant link-able library with a solid API. . This package contains the development files for libgit2. Homepage: https://libgit2.github.com/ Package: libgl1 Status: install ok installed Priority: optional Section: libs Installed-Size: 652 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libglvnd Version: 1.6.0-1 Depends: libc6 (>= 2.34), libglvnd0 (= 1.6.0-1), libglx0 (= 1.6.0-1) Description: Vendor neutral GL dispatch library -- legacy GL support This is an implementation of the vendor-neutral dispatch layer for arbitrating OpenGL API calls between multiple vendors on a per-screen basis. . This package contains support for old libGL for compatibility reasons. Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd Package: libgl1-mesa-dri Status: install ok installed Priority: optional Section: libs Installed-Size: 25250 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 22.3.6-1+deb12u1 Depends: libc6 (>= 2.34), libdrm-amdgpu1 (>= 2.4.110), libdrm-intel1 (>= 2.4.38), libdrm-nouveau2 (>= 2.4.66), libdrm-radeon1 (>= 2.4.31), libdrm2 (>= 2.4.75), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libglapi-mesa (= 22.3.6-1+deb12u1), libllvm15, libsensors5 (>= 1:3.5.0), libstdc++6 (>= 11), libxcb-dri3-0 (>= 1.13), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Description: free implementation of the OpenGL API -- DRI modules This version of Mesa provides GLX and DRI capabilities: it is capable of both direct and indirect rendering. For direct rendering, it can use DRI modules from the libgl1-mesa-dri package to accelerate drawing. . This package does not include the OpenGL library itself, only the DRI modules for accelerating direct rendering. . For a complete description of Mesa, please look at the libglx-mesa0 package. Homepage: https://mesa3d.org/ Package: libglapi-mesa Status: install ok installed Priority: optional Section: libs Installed-Size: 268 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 22.3.6-1+deb12u1 Depends: libc6 (>= 2.34) Description: free implementation of the GL API -- shared library The Mesa GL API module is responsible for dispatching all the gl* functions. It is intended to be mainly used by both the libgles1-mesa and libgles2-mesa packages. Homepage: https://mesa3d.org/ Package: libglib2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 4135 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: glib2.0 Version: 2.74.6-2+deb12u9 Depends: libc6 (>= 2.34), libffi8 (>= 3.4), libmount1 (>= 2.35.2-7~), libpcre2-8-0 (>= 10.22), libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.2) Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs Suggests: low-memory-monitor Breaks: gimp (<< 2.10.14-3~), glib-networking-tests (<< 2.70.0~), gnome-keyring (<< 40.0-3~), libedataserver-1.2-26 (<< 3.44.3-2~), libgirepository-1.0-1 (<< 1.62.0-4~), libgladeui-2-6 (<< 3.22.2), libsoup2.4-tests (<< 2.72.0-3~) Description: GLib library of C routines GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the shared libraries. Homepage: https://wiki.gnome.org/Projects/GLib Package: libglib2.0-bin Status: install ok installed Priority: optional Section: misc Installed-Size: 336 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: foreign Source: glib2.0 Version: 2.74.6-2+deb12u9 Depends: libglib2.0-data, libc6 (>= 2.34), libelf1 (>= 0.142), libglib2.0-0 (= 2.74.6-2+deb12u9) Description: Programs for the GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the program files which is used for the libraries and others. Homepage: https://wiki.gnome.org/Projects/GLib Package: libglib2.0-data Status: install ok installed Priority: optional Section: libs Installed-Size: 9406 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: glib2.0 Version: 2.74.6-2+deb12u9 Description: Common files for GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package is needed for the runtime libraries to display messages in languages other than English. Homepage: https://wiki.gnome.org/Projects/GLib Package: libglvnd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 728 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libglvnd Version: 1.6.0-1 Replaces: libgldispatch0-nvidia Depends: libc6 (>= 2.34) Breaks: libgldispatch0-nvidia Description: Vendor neutral GL dispatch library This is an implementation of the vendor-neutral dispatch layer for arbitrating OpenGL API calls between multiple vendors on a per-screen basis. . This package contains the GL dispatch library. Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd Package: libglx-mesa0 Status: install ok installed Priority: optional Section: libs Installed-Size: 518 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 22.3.6-1+deb12u1 Provides: libglx-vendor Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.75), libexpat1 (>= 2.0.1), libglapi-mesa (= 22.3.6-1+deb12u1), libx11-6 (>= 2:1.4.99.1), libx11-xcb1 (>= 2:1.8.4), libxcb-dri2-0 (>= 1.8), libxcb-dri3-0 (>= 1.13), libxcb-glx0 (>= 1.8), libxcb-present0, libxcb-randr0, libxcb-shm0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxext6, libxfixes3, libxshmfence1, libxxf86vm1, libgl1-mesa-dri Breaks: glx-diversions (<< 0.8.4~), libopengl-perl (<< 0.6704+dfsg-2) Description: free implementation of the OpenGL API -- GLX vendor library Mesa is a 3-D graphics library with an API which is very similar to that of OpenGL. To the extent that Mesa utilizes the OpenGL command syntax or state machine, it is being used with authorization from Silicon Graphics, Inc. However, the authors make no claim that Mesa is in any way a compatible replacement for OpenGL or associated with Silicon Graphics, Inc. . This version of Mesa provides GLX and DRI capabilities: it is capable of both direct and indirect rendering. For direct rendering, it can use DRI modules from the libgl1-mesa-dri package to accelerate drawing. . This package does not include the modules themselves: these can be found in the libgl1-mesa-dri package. Homepage: https://mesa3d.org/ Package: libglx0 Status: install ok installed Priority: optional Section: libs Installed-Size: 162 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libglvnd Version: 1.6.0-1 Depends: libc6 (>= 2.34), libglvnd0 (= 1.6.0-1), libx11-6 (>= 2:1.4.99.1), libglx-mesa0 Description: Vendor neutral GL dispatch library -- GLX support This is an implementation of the vendor-neutral dispatch layer for arbitrating OpenGL API calls between multiple vendors on a per-screen basis. . This package contains support for GLX. Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd Package: libgme0 Status: install ok installed Priority: optional Section: libs Installed-Size: 333 Maintainer: Ileana Dumitrescu Architecture: amd64 Multi-Arch: same Source: game-music-emu Version: 0.6.3-6 Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.0), libstdc++6 (>= 11), zlib1g (>= 1:1.1.4) Description: Playback library for video game music files - shared library game-music-emu is a collection of video game music file emulators that support the following formats and systems: * AY ZX Spectrum/Amstrad CPC * GBS Nintendo Game Boy * GYM Sega Genesis/Mega Drive * HES NEC TurboGrafx-16/PC Engine * KSS MSX Home Computer/other Z80 systems (doesn't support FM sound) * NSF/NSFE Nintendo NES/Famicom (with VRC 6, Namco 106, and FME-7 sound) * SAP Atari systems using POKEY sound chip * SPC Super Nintendo/Super Famicom * VGM/VGZ Sega Master System/Mark III, Sega Genesis/Mega Drive, BBC Micro . This package contains the shared libraries necessary to run programs using libgme. Homepage: https://bitbucket.org/mpyne/game-music-emu/wiki/Home Package: libgmp10 Status: install ok installed Priority: optional Section: libs Installed-Size: 855 Maintainer: Debian Science Team Architecture: amd64 Multi-Arch: same Source: gmp Version: 2:6.2.1+dfsg1-1.1 Depends: libc6 (>= 2.14) Breaks: libmath-gmp-perl (<< 2.20-1), libmath-prime-util-gmp-perl (<< 0.51-2), postgresql-pgmp (<< 1.0.3-1) Description: Multiprecision arithmetic library GNU MP is a programmer's library for arbitrary precision arithmetic (ie, a bignum package). It can operate on signed integer, rational, and floating point numeric types. . It has a rich set of functions, and the functions have a regular interface. Homepage: https://gmplib.org/ Package: libgnustep-base1.28 Status: install ok installed Priority: optional Section: libs Installed-Size: 6962 Maintainer: Debian GNUstep maintainers Architecture: amd64 Source: gnustep-base Version: 1.28.1+really1.28.0-5 Depends: gnustep-base-common (= 1.28.1+really1.28.0-5), libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.34), libffi8 (>= 3.4), libgcc-s1 (>= 3.0), libgnutls30 (>= 3.7.5), libicu72 (>= 72.1~rc-1~), libobjc4 (>= 4.6), libxml2 (>= 2.9.0), libxslt1.1 (>= 1.1.25), zlib1g (>= 1:1.1.4) Recommends: gnustep-base-runtime (= 1.28.1+really1.28.0-5) Description: GNUstep Base library The GNUstep Base Library is a powerful fast library of general-purpose, non-graphical Objective C classes, inspired by the OpenStep API but implementing Apple and GNU additions to the API as well. It includes for example classes for unicode strings, arrays, dictionaries, sets, byte streams, typed coders, invocations, notifications, notification dispatchers, scanners, tasks, files, networking, threading, remote object messaging support (distributed objects), event loops, loadable bundles, attributed unicode strings, xml, mime, user defaults. Homepage: http://gnustep.org Package: libgnutls30 Status: install ok installed Priority: optional Section: libs Installed-Size: 3396 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: gnutls28 Version: 3.7.9-2+deb12u7 Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg1), libhogweed6 (>= 3.6), libidn2-0 (>= 2.0.0), libnettle8 (>= 3.7~), libp11-kit0 (>= 0.23.18.1), libtasn1-6 (>= 4.14), libunistring2 (>= 0.9.7) Suggests: gnutls-bin Description: GNU TLS library - main runtime library GnuTLS is a portable library which implements the Transport Layer Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram Transport Layer Security (DTLS 1.0, 1.2) protocols. . GnuTLS features support for: - certificate path validation, as well as DANE and trust on first use. - the Online Certificate Status Protocol (OCSP). - public key methods, including RSA and Elliptic curves, as well as password and key authentication methods such as SRP and PSK protocols. - all the strong encryption algorithms, including AES and Camellia. - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets. - HSMs and cryptographic tokens, via PKCS #11. . This package contains the main runtime library. Homepage: https://www.gnutls.org/ Package: libgomp1 Status: install ok installed Priority: optional Section: libs Installed-Size: 312 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34) Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2) Description: GCC OpenMP (GOMP) support library GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers in the GNU Compiler Collection. Homepage: http://gcc.gnu.org/ Package: libgpg-error0 Status: install ok installed Priority: optional Section: libs Installed-Size: 192 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: same Source: libgpg-error Version: 1.46-1 Depends: libc6 (>= 2.34) Recommends: libgpg-error-l10n Description: GnuPG development runtime library Library that defines common error values, messages, and common runtime functionality for all GnuPG components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and possibly more in the future. . It will likely be renamed "gpgrt" in the future. Homepage: https://www.gnupg.org/related_software/libgpg-error/ Package: libgpm2 Status: install ok installed Priority: optional Section: libs Installed-Size: 45 Maintainer: Axel Beckert Architecture: amd64 Multi-Arch: same Source: gpm (1.20.7-10) Version: 1.20.7-10+b1 Depends: libc6 (>= 2.33) Suggests: gpm Description: General Purpose Mouse - shared library This package provides a library that handles mouse requests and delivers them to applications. See the description for the 'gpm' package for more information. Homepage: https://nico.schottelius.org/software/gpm/ Package: libgprofng0 Status: install ok installed Priority: optional Section: devel Installed-Size: 3958 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: binutils Version: 2.40-2 Depends: libbinutils (= 2.40-2), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2), zlib1g (>= 1:1.1.4) Description: GNU Next Generation profiler (runtime library) Gprofng is the GNU Next Generation profiler for analyzing the performance of Linux applications. Gprofng allows you to: . - Profile C / C++ / Java / Scala applications without needing to recompile - Profile multi-threaded applications - Analyze and compare multiple experiments - Use time-based sampling and / or hardware event counters . This package includes the libgprofng shared library. Homepage: https://www.gnu.org/software/binutils/ Package: libgraphite2-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 203 Maintainer: Debian LibreOffice Maintainers Architecture: amd64 Multi-Arch: same Source: graphite2 Version: 1.3.14-1 Replaces: libgraphite2-2.0.0 Provides: libgraphite2-2.0.0 Depends: libc6 (>= 2.14) Breaks: libgraphite2-2.0.0 (<< 1.2.0) Description: Font rendering engine for Complex Scripts -- library Graphite is a system that can be used to create and use "smart fonts" capable of displaying writing systems with various complex behaviors, such as: contextual shaping, ligatures, reordering, split glyphs, bidirectionality, stacking diacritics and complex positioning. . This library was designed and developed by the NRSI (Non-Roman Script Initiative) within SIL International (www.sil.org) to act as a complement to other smart font rendering technologies with limited practical local extensibility. Its purpose is to help meet the needs of a very large number of "minority language" communities for local extensibility of complex script behaviors. . The behavior of the rendering engine for a given writing system is specified through extra tables added to a TrueType font. These tables are generated by compiling a GDL (Graphite Description Language) source file into a font using grcompiler. . This package contains the shared library. Homepage: http://graphite.sil.org/ Package: libgsm1 Status: install ok installed Priority: optional Section: libs Installed-Size: 92 Maintainer: Debian Mobcom Maintainers Architecture: amd64 Multi-Arch: same Source: libgsm Version: 1.0.22-1 Depends: libc6 (>= 2.4) Conflicts: libgsm-dev Description: Shared libraries for GSM speech compressor This package contains runtime shared libraries for libgsm, an implementation of the European GSM 06.10 provisional standard for full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse excitation/long term prediction) coding at 13 kbit/s. . GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling rate, i.e. a frame rate of 50 Hz) into 260 bits; for compatibility with typical UNIX applications, this implementation turns frames of 160 16-bit linear samples into 33-byte frames (1650 Bytes/s). The quality of the algorithm is good enough for reliable speaker recognition; even music often survives transcoding in recognizable form (given the bandwidth limitations of 8 kHz sampling rate). . The interfaces offered are a front end modelled after compress(1), and a library API. Compression and decompression run faster than realtime on most SPARCstations. The implementation has been verified against the ETSI standard test patterns. Homepage: http://www.quut.com/gsm/ Package: libgssapi-krb5-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 425 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.20.1-2+deb12u5 Depends: libc6 (>= 2.33), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkrb5-3 (= 1.20.1-2+deb12u5), libkrb5support0 (>= 1.15~beta1) Suggests: krb5-doc, krb5-user Breaks: moonshot-gss-eap (<= 1.0) Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime library for the MIT Kerberos implementation of GSS-API used by applications and Kerberos clients. Homepage: https://web.mit.edu/kerberos/ Package: libgstreamer1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 4418 Maintainer: Maintainers of GStreamer packages Architecture: amd64 Multi-Arch: same Source: gstreamer1.0 Version: 1.22.0-2+deb12u1 Depends: libc6 (>= 2.34), libcap2 (>= 1:2.10), libdw1 (>= 0.126), libglib2.0-0 (>= 2.70.0), libunwind8, libcap2-bin Suggests: gstreamer1.0-tools Breaks: gstreamer1.0-plugins-bad (<< 1.11.1), gstreamer1.0-plugins-base (<< 1.8.0), libgstreamer-plugins-bad1.0-0 (<< 1.13.1) Description: Core GStreamer libraries and elements GStreamer is a streaming media framework, based on graphs of filters which operate on media data. Applications using this library can do anything from real-time sound processing to playing videos, and just about anything else media-related. Its plugin-based architecture means that new data types or processing capabilities can be added simply by installing new plug-ins. . This package contains the core library and elements. Homepage: https://gstreamer.freedesktop.org Package: libharfbuzz0b Status: install ok installed Priority: optional Section: libs Installed-Size: 2609 Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) Architecture: amd64 Multi-Arch: same Source: harfbuzz Version: 6.0.0+dfsg-3 Replaces: libharfbuzz0, libharfbuzz0a Depends: libc6 (>= 2.34), libfreetype6 (>= 2.11.0), libglib2.0-0 (>= 2.31.8), libgraphite2-3 (>= 1.2.2) Conflicts: libharfbuzz0, libharfbuzz0a Description: OpenType text shaping engine (shared library) HarfBuzz is an implementation of the OpenType Layout engine (aka layout engine) and the script-specific logic (aka shaping engine). . This package contains the shared libraries. Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz Package: libhashkit2 Status: install ok installed Priority: optional Section: libs Installed-Size: 59 Maintainer: Ondřej Surý Architecture: amd64 Multi-Arch: same Source: libmemcached Version: 1.1.4-1+0~20260506.6+debian12~1.gbp476b80 Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0) Description: libmemcached hashing functions and algorithms libhashkit is a small and thread-safe client library that provides a collection of useful hashing algorithm. libhashkit is distributed with libmemcached. . This package provides the libhashkit shared library. Homepage: https://awesomized.github.io/libmemcached/ Package: libheif1 Status: install ok installed Priority: optional Section: libs Installed-Size: 659 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libheif Version: 1.15.1-1+deb12u1 Depends: libaom3 (>= 3.2.0), libc6 (>= 2.34), libdav1d6 (>= 0.1.0), libde265-0 (>= 1.0.7), libgcc-s1 (>= 3.0), libstdc++6 (>= 11), libx265-199 (>= 3.5), zlib1g (>= 1:1.1.4) Description: ISO/IEC 23008-12:2017 HEIF file format decoder - shared library libheif is an ISO/IEC 23008-12:2017 HEIF file format decoder. HEIF is a new image file format employing HEVC (h.265) image coding for the best compression ratios currently possible. . This package contains the shared library. Homepage: http://www.libheif.org Package: libhogweed6 Status: install ok installed Priority: optional Section: libs Installed-Size: 463 Maintainer: Magnus Holmgren Architecture: amd64 Multi-Arch: same Source: nettle Version: 3.8.1-2 Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg1), libnettle8 Description: low level cryptographic library (public-key cryptos) Nettle is a cryptographic library that is designed to fit easily in more or less any context: In crypto toolkits for object-oriented languages (C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel space. . It tries to solve a problem of providing a common set of cryptographic algorithms for higher-level applications by implementing a context-independent set of cryptographic algorithms. In that light, Nettle doesn't do any memory allocation or I/O, it simply provides the cryptographic algorithms for the application to use in any environment and in any way it needs. . This package contains the asymmetric cryptographic algorithms, which, require the GNU multiple precision arithmetic library (libgmp) for their large integer computations. Homepage: http://www.lysator.liu.se/~nisse/nettle/ Package: libhtml-parser-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 227 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Version: 3.81-1 Depends: perl (>= 5.36.0-7), perlapi-5.36.0, libc6 (>= 2.4), libhtml-tagset-perl, liburi-perl Recommends: libhttp-message-perl Suggests: libdata-dump-perl Enhances: libwww-perl Description: collection of modules that parse HTML text documents HTML::Parser is a collection of modules useful for handling HTML documents. These modules used to be part of the libwww-perl distribution, but are now unbundled in order to facilitate a separate development track. . Objects of the HTML::Parser class will recognize markup and separate it from content data. As different kinds of markup are recognized, the corresponding event handler is invoked. The document to be parsed may also be supplied in arbitrary chunks, making on-the-fly parsing of network documents possible. Homepage: https://metacpan.org/release/HTML-Parser Package: libhtml-tagset-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 31 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 3.20-6 Depends: perl:any Description: data tables pertaining to HTML HTML::Tagset contains data tables useful in dealing with HTML. For instance, it provides %HTML::Tagset::emptyElement, which lists all of the HTML elements which cannot have content. It provides no functions or methods. Homepage: https://metacpan.org/release/HTML-Tagset Package: libhttp-date-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 30 Maintainer: Debian Perl Group Architecture: all Version: 6.05-2 Depends: perl:any, libtimedate-perl, libtime-local-perl (>= 1.28) Description: module of date conversion routines HTTP::Date provides functions that deal the date formats used by the HTTP protocol (and then some more). Only the first two functions, time2str() and str2time(), are exported by default. Homepage: https://metacpan.org/release/HTTP-Date Package: libhttp-parser-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 93 Maintainer: Christoph Biedl Architecture: amd64 Source: http-parser Version: 2.9.4-5 Depends: libhttp-parser2.9 (= 2.9.4-5) Description: parser for HTTP messages: development libraries and header files It parses both requests and responses. The parser is designed to be used in performance HTTP applications. It does not make any syscalls nor allocations, it does not buffer data, it can be interrupted at anytime. Depending on your architecture, it only requires about 40 bytes of data per message stream (in a web server that is per connection). . This package contains development libraries and header files. Homepage: https://github.com/joyent/http-parser Package: libhttp-parser2.9 Status: install ok installed Priority: optional Section: libs Installed-Size: 69 Maintainer: Christoph Biedl Architecture: amd64 Multi-Arch: same Source: http-parser Version: 2.9.4-5 Depends: libc6 (>= 2.2.5) Description: parser for HTTP messages written in C It parses both requests and responses. The parser is designed to be used in performance HTTP applications. It does not make any syscalls nor allocations, it does not buffer data, it can be interrupted at anytime. Depending on your architecture, it only requires about 40 bytes of data per message stream (in a web server that is per connection). Homepage: https://github.com/joyent/http-parser Package: libhwy1 Status: install ok installed Priority: optional Section: libs Installed-Size: 1628 Maintainer: Debian PhotoTools Maintainers Architecture: amd64 Multi-Arch: same Source: highway Version: 1.0.3-3+deb12u1 Depends: libc6 (>= 2.25), libgcc-s1 (>= 3.4), libstdc++6 (>= 5.2) Description: Efficient and performance-portable SIMD wrapper (runtime files) This library provides type-safe and source-code portable wrappers over existing platform-specific intrinsics. Its design aims for simplicity, reliable efficiency across platforms, and immediate usability with current compilers. . This package installs the runtime files. Homepage: https://github.com/google/highway Package: libicu72 Status: install ok installed Priority: optional Section: libs Installed-Size: 36170 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: icu Version: 72.1-3+deb12u1 Replaces: libiculx63 (<< 63.1-5) Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 12) Breaks: libiculx63 (<< 63.1-5), openttd (<< 1.8.0-2~) Description: International Components for Unicode ICU is a C++ and C library that provides robust and full-featured Unicode and locale support. This package contains the runtime libraries for ICU. Homepage: https://icu.unicode.org/ Package: libidn2-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 439 Maintainer: Debian Libidn team Architecture: amd64 Multi-Arch: same Source: libidn2 (2.3.3-1) Version: 2.3.3-1+b1 Depends: libc6 (>= 2.14), libunistring2 (>= 0.9.7) Description: Internationalized domain names (IDNA2008/TR46) library Libidn2 implements the revised algorithm for internationalized domain names called IDNA2008/TR46. . This package contains runtime libraries. Homepage: https://www.gnu.org/software/libidn/#libidn2 Package: libiec61883-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 81 Maintainer: Debian QA Group Architecture: amd64 Multi-Arch: same Source: libiec61883 (1.2.0-6) Version: 1.2.0-6+b1 Depends: libc6 (>= 2.4), libraw1394-11 (>= 2.1.2) Description: partial implementation of IEC 61883 (shared lib) Implementation of IEC 61883, part 1 (CIP, plug registers, and CMP), part 2 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of IIDC, nearly all FireWire multimedia devices use IEC 61883 protocols. . The libiec61883 library provides a higher level API for streaming DV, MPEG-2 and audio over Linux IEEE 1394. This includes both reception and transmission. It uses the new "rawiso" API of libraw1394, which transparently provides mmap-ed DMA for efficient data transfer. It also represents the third generation of I/O technology for Linux 1394 for these media types thereby removing the complexities of additional kernel modules, /dev nodes, and procfs. It also consolidates features for plug control registers and connection management that previously existed in experimental form in an unreleased version of libavc1394. Homepage: https://ieee1394.wiki.kernel.org/index.php/Main_Page Package: libimagequant0 Status: install ok installed Priority: optional Section: libs Installed-Size: 82 Maintainer: Debian PhotoTools Maintainers Architecture: amd64 Multi-Arch: same Source: libimagequant Version: 2.17.0-1 Depends: libc6 (>= 2.29), libgomp1 (>= 4.9) Description: palette quantization library Small, portable C library for high-quality conversion of RGBA images to 8-bit indexed-color (palette) images. . This library powers pngquant and other PNG optimizers. Homepage: https://github.com/ImageOptim/libimagequant Package: libinih1 Status: install ok installed Priority: optional Section: libs Installed-Size: 29 Maintainer: Yangfl Architecture: amd64 Multi-Arch: same Source: libinih Version: 55-1 Depends: libc6 (>= 2.4) Description: simple .INI file parser inih (INI Not Invented Here) is a simple .INI file parser written in C. It's only a couple of pages of code, and it was designed to be small and simple, so it's good for embedded systems. It's also more or less compatible with Python's ConfigParser style of .INI files, including RFC 822-style multi-line syntax and name: value entries. Homepage: https://github.com/benhoyt/inih Package: libinotifytools0 Status: install ok installed Priority: optional Section: libs Installed-Size: 65 Maintainer: Joao Eriberto Mota Filho Architecture: amd64 Multi-Arch: same Source: inotify-tools Version: 3.22.6.0-4 Depends: libc6 (>= 2.33) Description: utility wrapper around inotify inotify (inode notify) is a Linux kernel subsystem that monitors events in filesystems and reports those events to applications in real time via API. . inotify can be used to monitor individual files or directories. When a directory is monitored, inotify will return events for the directory itself and for files inside the directory. . libinotifytools is a thin layer on top of the kernel interface which makes it easy to set up watches on many files at once, read events without having to deal with low-level I/O and several utility functions for inotify-related string formatting. Homepage: https://github.com/rvoicilas/inotify-tools/wiki/ Package: libio-socket-ssl-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 603 Maintainer: Debian Perl Group Architecture: all Version: 2.081-2 Depends: perl:any, libnet-ssleay-perl, netbase Recommends: libio-socket-ip-perl | libio-socket-inet6-perl, libsocket-perl | libsocket6-perl, liburi-perl | libnet-libidn-perl | libnet-idn-encode-perl Suggests: ca-certificates Description: Perl module implementing object oriented interface to SSL sockets This module is a true drop-in replacement for IO::Socket::INET that uses SSL to encrypt data before it is transferred to a remote server or client. IO::Socket::SSL supports all the extra features that one needs to write a full-featured SSL client or server application: multiple SSL contexts, cipher selection, certificate verification, and SSL version selection. As an extra bonus, it works perfectly with mod_perl. . IO::Socket::SSL uses IPv6 if libio-socket-ip-perl (>= 0.20) or libio-socket-inet6-perl is installed. Homepage: https://metacpan.org/release/IO-Socket-SSL Package: libio-string-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 32 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 1.08-4 Depends: perl:any Description: Emulate IO::File interface for in-core strings The IO::String module provide the IO::File interface for in-core strings. An IO::String object can be attached to a string, and will make it possible to use the normal file operations for reading or writing data, as well as seeking to various locations of the string. The main reason you might want to do this, is if you have some other library module that only provide an interface to file handles, and you want to keep all the stuff in memory. . The IO::String module provide an interface compatible with IO::File as distributed with IO-1.20, but the following methods are not available; new_from_fd, fdopen, format_write, format_page_number, format_lines_per_page, format_lines_left, format_name, format_top_name. Homepage: https://metacpan.org/release/IO-String Package: libio-stringy-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 134 Maintainer: Debian Perl Group Architecture: all Source: io-stringy Version: 2.111-3 Depends: perl Description: modules for I/O on in-core objects (strings/arrays) IO::stringy primarily provides modules for performing both traditional and object-oriented I/O on things *other* than normal filehandles; in particular, IO::Scalar, IO::ScalarArray, and IO::Lines. . The libio-stringy-perl package provides the following modules: . * IO::AtomicFile - write a file which is updated atomically * IO::InnerFile - define a file inside another file * IO::Lines - IO:: interface for reading/writing an array of lines * IO::Scalar - IO:: interface for reading/writing a scalar * IO::ScalarArray - IO:: interface for reading/writing an array of scalars * IO::Stringy - I/O on in-core objects like strings and arrays * IO::Wrap - wrap raw filehandles in IO::Handle interface * IO::WrapTie - wrap tieable objects in IO::Handle interface Homepage: https://metacpan.org/release/IO-stringy Package: libip4tc2 Status: install ok installed Priority: optional Section: libs Installed-Size: 66 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Multi-Arch: same Source: iptables Version: 1.8.9-2 Depends: libc6 (>= 2.28) Description: netfilter libip4tc library The iptables/xtables framework has been replaced by nftables. You should consider migrating now. . This package contains the user-space iptables (IPv4) C library from the Netfilter xtables framework. . iptables IPv4 ruleset ADT and kernel interface. . This library has been considered private for years (and still is), in the sense of changing symbols and backward compatibility not guaranteed. Homepage: https://www.netfilter.org/ Package: libip6tc2 Status: install ok installed Priority: optional Section: libs Installed-Size: 66 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Multi-Arch: same Source: iptables Version: 1.8.9-2 Depends: libc6 (>= 2.28) Description: netfilter libip6tc library The iptables/xtables framework has been replaced by nftables. You should consider migrating now. . This package contains the user-space iptables (IPv6) C library from the Netfilter xtables framework. . iptables IPv6 ruleset ADT and kernel interface. . This library has been considered private for years (and still is), in the sense of changing symbols and backward compatibility not guaranteed. Homepage: https://www.netfilter.org/ Package: libisl23 Status: install ok installed Priority: optional Section: libs Installed-Size: 2302 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: isl Version: 0.25-1.1 Replaces: libisl-dbg (<< 0.19) Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg1) Breaks: libisl-dbg (<< 0.19) Description: manipulating sets and relations of integer points bounded by linear constraints isl is a library for manipulating sets and relations of integer points bounded by linear constraints. Supported operations on sets include intersection, union, set difference, emptiness check, convex hull, (integer) affine hull, integer projection, and computing the lexicographic minimum using parametric integer programming. It also includes an ILP solver based on generalized basis reduction. . This package contains the runtime library. Homepage: http://isl.gforge.inria.fr/ Package: libitm1 Status: install ok installed Priority: optional Section: libs Installed-Size: 115 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34) Description: GNU Transactional Memory Library GNU Transactional Memory Library (libitm) provides transaction support for accesses to the memory of a process, enabling easy-to-use synchronization of accesses to shared memory by several threads. Homepage: http://gcc.gnu.org/ Package: libjack-jackd2-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1154 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: jackd2 Version: 1.9.21~dfsg-3 Replaces: libjack-0.116, libjack-0.125 Provides: libjack-0.116, libjack-0.125 Depends: libc6 (>= 2.34), libdb5.3, libgcc-s1 (>= 3.0), libopus0 (>= 1.3.1-2~), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 11) Suggests: jackd2 (= 1.9.21~dfsg-3) Conflicts: libjack-0.116, libjack-0.125, libjack0 Description: JACK Audio Connection Kit (libraries) JACK is a low-latency sound server, allowing multiple applications to connect to one audio device, and to share audio between themselves. . This package contains the shared libraries. Homepage: https://jackaudio.org/ Package: libjansson4 Status: install ok installed Priority: optional Section: libs Installed-Size: 101 Maintainer: Alessandro Ghedini Architecture: amd64 Multi-Arch: same Source: jansson Version: 2.14-2 Depends: libc6 (>= 2.14) Description: C library for encoding, decoding and manipulating JSON data Jansson is a C library for encoding, decoding and manipulating JSON data. . It features: * Simple and intuitive API and data model * Comprehensive documentation * No dependencies on other libraries * Full Unicode support (UTF-8) * Extensive test suite Homepage: http://www.digip.org/jansson/ Package: libjbig0 Status: install ok installed Priority: optional Section: libs Installed-Size: 84 Maintainer: Michael van der Kolff Architecture: amd64 Multi-Arch: same Source: jbigkit Version: 2.1-6.1 Depends: libc6 (>= 2.4) Description: JBIGkit libraries JBIG-KIT provides a portable library of compression and decompression functions with a documented interface that you can include very easily into your image or document processing software. . This package contains the dynamically linked library. Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/ Package: libjemalloc2 Status: install ok installed Priority: optional Section: libs Installed-Size: 872 Maintainer: Faidon Liambotis Architecture: amd64 Multi-Arch: same Source: jemalloc Version: 5.3.0-1 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.4) Description: general-purpose scalable concurrent malloc(3) implementation A library providing a malloc(3) implementation for multi-threaded processes on multi-processor systems. . Notable features are reduced lock contention, predictable low fragmentation, and introspection with heap profiling. Homepage: http://jemalloc.net/ Package: libjpeg62-turbo Status: install ok installed Priority: optional Section: libs Installed-Size: 677 Maintainer: Ondřej Surý Architecture: amd64 Multi-Arch: same Source: libjpeg-turbo Version: 1:2.1.5-2 Replaces: libjpeg62 Provides: libjpeg62 (= 1:2.1.5-2) Depends: libc6 (>= 2.14) Conflicts: libjpeg62 Description: libjpeg-turbo JPEG runtime library The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. The libjpeg-turbo JPEG library is an API/ABI compatible with the IJG JPEG library. . This package contains the shared runtime library. Homepage: https://www.libjpeg-turbo.org/ Package: libjq1 Status: install ok installed Priority: optional Section: utils Installed-Size: 361 Maintainer: ChangZhuo Chen (陳昌倬) Architecture: amd64 Multi-Arch: same Source: jq Version: 1.6-2.1+deb12u1 Depends: libc6 (>= 2.35), libonig5 (>= 6.8.1) Description: lightweight and flexible command-line JSON processor - shared library jq is like sed for JSON data – you can use it to slice and filter and map and transform structured data with the same ease that sed, awk, grep and friends let you play with text. . It is written in portable C, and it has minimal runtime dependencies. . jq can mangle the data format that you have into the one that you want with very little effort, and the program to do so is often shorter and simpler than you’d expect. . This package contains the shared library. Homepage: https://github.com/stedolan/jq Package: libjs-jquery Status: install ok installed Priority: optional Section: javascript Installed-Size: 705 Maintainer: Debian Javascript Maintainers Architecture: all Multi-Arch: foreign Source: node-jquery Version: 3.6.1+dfsg+~3.5.14-1 Recommends: javascript-common Description: JavaScript library for dynamic web applications jQuery is a fast, concise, JavaScript Library that simplifies how you traverse HTML documents, handle events, perform animations, and add Ajax interactions to your web pages. jQuery is designed to change the way that you write JavaScript. Homepage: https://jquery.com/ Package: libjs-sphinxdoc Status: install ok installed Priority: optional Section: javascript Installed-Size: 184 Maintainer: Debian Python Team Architecture: all Multi-Arch: foreign Source: sphinx Version: 5.3.0-4 Depends: libjs-jquery (>= 1.11.1), libjs-underscore (>= 1.3.1) Description: JavaScript support for Sphinx documentation Sphinx is a tool for producing documentation for Python projects, using reStructuredText as markup language. . This package provides JavaScript code for documentation generated by Sphinx. Homepage: https://www.sphinx-doc.org/ Package: libjs-underscore Status: install ok installed Priority: optional Section: javascript Installed-Size: 349 Maintainer: Debian Javascript Maintainers Architecture: all Multi-Arch: foreign Source: underscore Version: 1.13.4~dfsg+~1.11.4-3 Recommends: javascript-common, libjs-jquery Description: JavaScript's functional programming helper library Underscore is a utility-belt library for JavaScript that provides a lot of the functional programming support that you would expect in Prototype.js (or Ruby), but without extending any of the built-in JavaScript objects. It's the tie to go along with jQuery's tux. . Underscore provides 60-odd functions that support both the usual functional suspects: map, select, invoke - as well as more specialized helpers: function binding, javascript templating, deep equality testing, and so on. It delegates to built-in functions, if present, so modern browsers will use the native implementations of forEach, map, reduce, filter, every, some and indexOf. Homepage: https://underscorejs.org/ Package: libjson-c5 Status: install ok installed Priority: optional Section: libs Installed-Size: 109 Maintainer: Nicolas Mora Architecture: amd64 Multi-Arch: same Source: json-c Version: 0.16-2 Depends: libc6 (>= 2.33) Description: JSON manipulation library - shared library This library allows you to easily construct JSON objects in C, output them as JSON formatted strings and parse JSON formatted strings back into the C representation of JSON objects. Homepage: https://github.com/json-c/json-c/wiki Package: libjson-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 244 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 4.10000-1 Depends: perl:any Recommends: libjson-xs-perl Description: module for manipulating JSON-formatted data JSON is a Perl module for manipulating data stored in the format of the same name. JavaScript Object Notation (JSON) is a simple data serialization format (defined in RFC 4627) that serves as an alternative to XML. . The primary purpose of this module is to select an appropriate backend JSON implementation. It prefers either JSON::XS (see libjson-xs-perl) or JSON::PP (see libjson-pp-perl), but will fall back on a backport implementation if neither are available. Homepage: https://metacpan.org/release/JSON Package: libjxl0.7 Status: install ok installed Priority: optional Section: libs Installed-Size: 3472 Maintainer: Debian PhotoTools Maintainers Architecture: amd64 Multi-Arch: same Source: jpeg-xl Version: 0.7.0-10+deb12u1 Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.35), libgcc-s1 (>= 3.4), libhwy1 (>= 0.16.0), liblcms2-2 (>= 2.13), libstdc++6 (>= 12) Description: JPEG XL Image Coding System - "JXL" (shared libraries) The JPEG XL Image Coding System (ISO/IEC 18181) is a lossy and lossless image compression format. It has a rich feature set and is particularly optimized for responsive web environments, so that content renders well on a wide range of devices. Moreover, it includes several features that help transition from the legacy JPEG format. . This package installs shared libraries. Homepage: https://github.com/libjxl/libjxl Package: libk5crypto3 Status: install ok installed Priority: optional Section: libs Installed-Size: 261 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.20.1-2+deb12u5 Depends: libc6 (>= 2.33), libkrb5support0 (>= 1.20) Suggests: krb5-doc, krb5-user Breaks: libgssapi-krb5-2 (<= 1.18~), libkrb5-3 (<= 1.18~) Description: MIT Kerberos runtime libraries - Crypto Library Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime cryptography libraries used by applications and Kerberos clients. Homepage: https://web.mit.edu/kerberos/ Package: libkeyutils1 Status: install ok installed Priority: optional Section: libs Installed-Size: 40 Maintainer: Christian Kastner Architecture: amd64 Multi-Arch: same Source: keyutils Version: 1.6.3-2 Depends: libc6 (>= 2.14) Description: Linux Key Management Utilities (library) Keyutils is a set of utilities for managing the key retention facility in the kernel, which can be used by filesystems, block devices and more to gain and retain the authorization and encryption keys required to perform secure operations. . This package provides a wrapper library for the key management facility system calls. Homepage: https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git Package: libklibc Status: install ok installed Priority: optional Section: libs Installed-Size: 97 Maintainer: Debian Kernel Team Architecture: amd64 Multi-Arch: same Source: klibc Version: 2.0.12-1 Description: minimal libc subset for use with initramfs klibc is intended to be a minimalistic libc subset for use with initramfs. It is deliberately written for small size, minimal entanglement, and portability, not speed. It is definitely a work in progress, and a lot of things are still missing. Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git Package: libkmod2 Status: install ok installed Priority: optional Section: libs Installed-Size: 141 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: same Source: kmod Version: 30+20221128-1 Depends: libc6 (>= 2.33), liblzma5 (>= 5.1.1alpha+20120614), libssl3 (>= 3.0.0), libzstd1 (>= 1.5.2) Description: libkmod shared library This library provides an API for insertion, removal, configuration and listing of kernel modules. Package: libkrb5-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 1077 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.20.1-2+deb12u5 Depends: libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.20.1-2+deb12u5), libssl3 (>= 3.0.0) Recommends: krb5-locales Suggests: krb5-doc, krb5-user Breaks: libapache2-mod-auth-kerb (<= 5.4-2.4), libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3) Description: MIT Kerberos runtime libraries Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime library for the main Kerberos v5 API used by applications and Kerberos clients. Homepage: https://web.mit.edu/kerberos/ Package: libkrb5support0 Status: install ok installed Priority: optional Section: libs Installed-Size: 134 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.20.1-2+deb12u5 Depends: libc6 (>= 2.34) Breaks: libgssapi-krb5-2 (<< 1.20), libk5crypto3 (<< 1.20), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-8 (<< 1.16) Description: MIT Kerberos runtime libraries - Support library Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains an internal runtime support library used by other Kerberos libraries. Homepage: https://web.mit.edu/kerberos/ Package: libksba8 Status: install ok installed Priority: optional Section: libs Installed-Size: 316 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: libksba Version: 1.6.3-2 Depends: libc6 (>= 2.14), libgpg-error0 (>= 1.46) Description: X.509 and CMS support library KSBA (pronounced Kasbah) is a library to make X.509 certificates as well as the CMS easily accessible by other applications. Both specifications are building blocks of S/MIME and TLS. . KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER Encoder, Certificate Handling and CMS Handling. . This package contains the runtime library files. Homepage: https://www.gnupg.org/related_software/libksba/ Package: liblapack3 Status: install ok installed Priority: optional Section: libs Installed-Size: 7188 Maintainer: Debian Science Team Architecture: amd64 Multi-Arch: same Source: lapack Version: 3.11.0-2 Provides: liblapack.so.3 Depends: libblas3 | libblas.so.3, libc6 (>= 2.29), libgcc-s1 (>= 4.0), libgfortran5 (>= 8) Description: Library of linear algebra routines 3 - shared version LAPACK version 3.X is a comprehensive FORTRAN library that does linear algebra operations including matrix inversions, least squared solutions to linear sets of equations, eigenvector analysis, singular value decomposition, etc. It is a very comprehensive and reputable package that has found extensive use in the scientific community. . This package contains a shared version of the library. Homepage: https://www.netlib.org/lapack/ Package: liblasso3 Status: install ok installed Priority: optional Section: libs Installed-Size: 1187 Maintainer: Frederic Peters Architecture: amd64 Source: lasso Version: 2.8.1-1+deb12u1 Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.41.1), libssl3 (>= 3.0.0), libxml2 (>= 2.7.4), libxmlsec1 (>= 1.2.35), libxmlsec1-openssl (>= 1.2.31), libxslt1.1 (>= 1.1.25), zlib1g (>= 1:1.1.4) Description: Library for Liberty Alliance and SAML protocols - runtime library Lasso is an implementation of Liberty Alliance and related protocols, for network identity federations, single sign-on and other web services protocols. The main specifications implemented by the library are ID-FF, ID-WSF and SAML. . This package contains liblasso library used by applications to gain Library Alliance support. Homepage: https://lasso.entrouvert.org Package: liblcms2-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 428 Maintainer: Thomas Weber Architecture: amd64 Multi-Arch: same Source: lcms2 Version: 2.14-2+deb12u1 Depends: libc6 (>= 2.29) Suggests: liblcms2-utils Description: Little CMS 2 color management library LittleCMS 2 intends to be a small-footprint color management engine, with special focus on accuracy and performance. It uses the International Color Consortium standard (ICC) of color management. LittleCMS 2 is a full implementation of ICC specification 4.2 plus all addendums. It fully supports all V2 and V4 profiles, including abstract, devicelink and named color profiles. . This package contains the shared library of liblcms2. Homepage: http://www.littlecms.com/ Package: libldap-2.5-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 553 Maintainer: Debian OpenLDAP Maintainers Architecture: amd64 Multi-Arch: same Source: openldap Version: 2.5.13+dfsg-5 Replaces: libldap-2.3-0, libldap2 Depends: libc6 (>= 2.34), libgnutls30 (>= 3.7.5), libsasl2-2 (>= 2.1.28+dfsg) Recommends: libldap-common Conflicts: ldap-utils (<= 2.1.23-1) Description: OpenLDAP libraries These are the run-time libraries for the OpenLDAP (Lightweight Directory Access Protocol) servers and clients. Homepage: https://www.openldap.org/ Package: libldap-common Status: install ok installed Priority: optional Section: libs Installed-Size: 92 Maintainer: Debian OpenLDAP Maintainers Architecture: all Multi-Arch: foreign Source: openldap Version: 2.5.13+dfsg-5 Replaces: libldap-2.4-2 (<< 2.4.44+dfsg-1) Conffiles: /etc/ldap/ldap.conf 4f02c6860a58b7402a4b5c5ec24aa7b2 Description: OpenLDAP common files for libraries These are common files for the run-time libraries for the OpenLDAP (Lightweight Directory Access Protocol) servers and clients. Homepage: https://www.openldap.org/ Package: liblerc4 Status: install ok installed Priority: optional Section: libs Installed-Size: 649 Maintainer: Debian GIS Project Architecture: amd64 Multi-Arch: same Source: lerc Version: 4.0.0+ds-2 Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.0), libstdc++6 (>= 11) Description: Limited Error Raster Compression library LERC is an open-source image or raster format which supports rapid encoding and decoding for any pixel type (not just RGB or Byte). Users set the maximum compression error per pixel while encoding, so the precision of the original input image is preserved (within user defined error bounds). Homepage: https://github.com/Esri/lerc Package: liblilv-0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 139 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: lilv Version: 0.24.14-1 Depends: libc6 (>= 2.33), libserd-0-0 (>= 0.30.2), libsord-0-0 (>= 0.14.0~dfsg0), libsratom-0-0 (>= 0.4.6~dfsg0) Description: library for simple use of LV2 plugins Lilv (formerly SLV2) is a library for LV2 hosts intended to make using LV2 Plugins as simple as possible (without sacrificing capabilities). . Lilv is the successor to SLV2, rewritten to be significantly faster and have minimal dependencies. . This package provides the shared library. Homepage: https://drobilla.net/software/lilv/ Package: liblinear4 Status: install ok installed Priority: optional Section: libs Installed-Size: 102 Maintainer: Debian Science Maintainers Architecture: amd64 Multi-Arch: same Source: liblinear Version: 2.3.0+dfsg-5 Depends: libblas3 | libblas.so.3, libc6 (>= 2.29), libgcc-s1 (>= 3.0), libstdc++6 (>= 5) Suggests: liblinear-tools (= 2.3.0+dfsg-5), liblinear-dev (= 2.3.0+dfsg-5) Description: Library for Large Linear Classification LIBLINEAR is a library for learning linear classifiers for large scale applications. It supports Support Vector Machines (SVM) with L2 and L1 loss, logistic regression, multi class classification and also Linear Programming Machines (L1-regularized SVMs). Its computational complexity scales linearly with the number of training examples making it one of the fastest SVM solvers around. It also provides Python bindings. . This package contains the shared libraries. Homepage: https://www.csie.ntu.edu.tw/~cjlin/liblinear/ Package: libllvm14 Status: install ok installed Priority: optional Section: libs Installed-Size: 107438 Maintainer: LLVM Packaging Team Architecture: amd64 Multi-Arch: same Source: llvm-toolchain-14 Version: 1:14.0.6-12 Depends: libc6 (>= 2.36), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 3.3), libstdc++6 (>= 12), libtinfo6 (>= 6), libxml2 (>= 2.7.4), libz3-4 (>= 4.8.12), zlib1g (>= 1:1.2.0) Description: Modular compiler and toolchain technologies, runtime library LLVM is a collection of libraries and tools that make it easy to build compilers, optimizers, just-in-time code generators, and many other compiler-related programs. . This package contains the LLVM runtime library. Homepage: https://www.llvm.org/ Package: libllvm15 Status: install ok installed Priority: optional Section: libs Installed-Size: 114610 Maintainer: LLVM Packaging Team Architecture: amd64 Multi-Arch: same Source: llvm-toolchain-15 (1:15.0.6-4) Version: 1:15.0.6-4+b1 Depends: libc6 (>= 2.36), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 3.3), libstdc++6 (>= 12), libtinfo6 (>= 6), libxml2 (>= 2.7.4), libz3-4 (>= 4.8.12), zlib1g (>= 1:1.2.0) Description: Modular compiler and toolchain technologies, runtime library LLVM is a collection of libraries and tools that make it easy to build compilers, optimizers, just-in-time code generators, and many other compiler-related programs. . This package contains the LLVM runtime library. Homepage: https://www.llvm.org/ Package: liblmdb0 Status: install ok installed Priority: optional Section: libs Installed-Size: 104 Maintainer: LMDB Architecture: amd64 Multi-Arch: same Source: lmdb Version: 0.9.24-1 Depends: libc6 (>= 2.14) Description: Lightning Memory-Mapped Database shared library This package contains the LMDB shared library. . Lighting Memory-Mapped Database (LMDB) is an ultra-fast, ultra-compact key-value embedded data store developed for the OpenLDAP Project. It uses memory-mapped files, so it has the read performance of a pure in-memory database while still offering the persistence of standard disk-based databases, and is only limited to the size of the virtual address space, (it is not limited to the size of physical RAM). Homepage: http://symas.com/mdb/ Package: liblocale-gettext-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 51 Maintainer: Debian Perl Group Architecture: amd64 Version: 1.07-5 Depends: libc6 (>= 2.3) Pre-Depends: perl-base (>= 5.36.0-5), perlapi-5.36.0 Description: module using libc functions for internationalization in Perl The Locale::gettext module permits access from perl to the gettext() family of functions for retrieving message strings from databases constructed to internationalize software. . It provides gettext(), dgettext(), dcgettext(), textdomain(), bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext() and dngettext(). Homepage: https://metacpan.org/release/gettext Package: liblockfile-bin Status: install ok installed Priority: standard Section: utils Installed-Size: 53 Maintainer: Miquel van Smoorenburg Architecture: amd64 Multi-Arch: foreign Source: liblockfile (1.17-1) Version: 1.17-1+b1 Replaces: liblockfile1 (<< 1.09-1) Depends: libc6 (>= 2.14) Breaks: liblockfile1 (<< 1.09-1) Description: support binaries for and cli utilities based on liblockfile This package contains support binaries for the liblockfile library, and the command-line utility ``dotlockfile''. Homepage: https://github.com/miquels/liblockfile Package: liblqr-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 76 Maintainer: Bernd Zeimetz Architecture: amd64 Multi-Arch: same Source: liblqr Version: 0.4.2-2.1 Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.24.0) Description: converts plain array images into multi-size representation The LiquidRescale (lqr) library provides a C/C++ API for performing non-uniform resizing of images by the seam-carving technique. . The library takes images in plain array format as input and converts them to a multi-size representation. . Following is a list of features: . * Areas in the image can be marked for preservation or discard * Once the image has been fully processed, the scaling can be done in real-time. In fact, the information can be saved and read out later without any further processing * The resizing is done with a single function which automatically performs all the necessary operations; it can also work in successive steps without wasting computational time * Possibility to tune the carving operation by letting the seams be less connected, or more rigid, or both * Can export and import the visibility map (the seams) * Other images can be attached and undergo the same carving process as the parent image * The automatic feature detection algorithm can be tuned by selecting among different energy gradient functions * Reports progress through a customizable interface * A signalling system permits one to cleanly handle errors . The library implements the algorithm described in the paper "Seam Carving for Content-Aware Image Resizing" by Shai Avidan and Ariel Shamir, which can be found at http://www.faculty.idc.ac.il/arik/imret.pdf . This package contains the shared library. Homepage: http://liblqr.wikidot.com/ Package: liblsan0 Status: install ok installed Priority: optional Section: libs Installed-Size: 2942 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 3.3) Description: LeakSanitizer -- a memory leak detector (runtime) LeakSanitizer (Lsan) is a memory leak detector which is integrated into AddressSanitizer. Homepage: http://gcc.gnu.org/ Package: libltdl7 Status: install ok installed Priority: optional Section: libs Installed-Size: 421 Maintainer: Alastair McKinstry Architecture: amd64 Multi-Arch: same Source: libtool Version: 2.4.7-7~deb12u1 Depends: libc6 (>= 2.34) Description: System independent dlopen wrapper for GNU libtool This package contains the run-time libltdl library. . A small library that aims at hiding the various difficulties of dlopening libraries from programmers. It is a system independent dlopen wrapper for GNU libtool. . It supports the following dlopen interfaces: * dlopen (Solaris, Linux and various BSD flavors) * shl_load (HP-UX) * LoadLibrary (Win16 and Win32) * load_add_on (BeOS) * GNU DLD (emulates dynamic linking for static libraries) * libtool's dlpreopen Homepage: https://www.gnu.org/software/libtool/ Package: liblua5.1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 425 Maintainer: Debian QA Group Architecture: amd64 Multi-Arch: same Source: lua5.1 Version: 5.1.5-9 Depends: libc6 (>= 2.29), libstdc++6 (>= 4.1.1) Description: Shared library for the Lua interpreter version 5.1 Lua is a powerful, light-weight programming language designed for extending applications. The language engine is accessible as a library, having a C API which allows the application to exchange data with Lua programs and also to extend Lua with C functions. Lua is also used as a general-purpose, stand-alone language through the simple command line interpreter provided. . This package contains runtime libraries. You shouldn't need to install it explicitly. Homepage: http://www.lua.org Package: liblua5.3-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 495 Maintainer: Debian Lua Team Architecture: amd64 Multi-Arch: same Source: lua5.3 Version: 5.3.6-2 Depends: libc6 (>= 2.34), libstdc++6 (>= 4.1.1) Description: Shared library for the Lua interpreter version 5.3 Lua is a powerful, light-weight programming language designed for extending applications. The language engine is accessible as a library, having a C API which allows the application to exchange data with Lua programs and also to extend Lua with C functions. Lua is also used as a general-purpose, stand-alone language through the simple command line interpreter provided. . This package contains runtime libraries. You shouldn't need to install it explicitly. Homepage: https://www.lua.org Package: liblua5.4-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 545 Maintainer: Debian Lua Team Architecture: amd64 Multi-Arch: same Source: lua5.4 Version: 5.4.4-3+deb12u1 Depends: libc6 (>= 2.34), libstdc++6 (>= 4.1.1) Description: Shared library for the Lua interpreter version 5.4 Lua is a powerful, light-weight programming language designed for extending applications. The language engine is accessible as a library, having a C API which allows the application to exchange data with Lua programs and also to extend Lua with C functions. Lua is also used as a general-purpose, stand-alone language through the simple command line interpreter provided. . This package contains runtime libraries. You shouldn't need to install it explicitly. Homepage: http://www.lua.org Package: libluajit2-5.1-2 Status: install ok installed Priority: optional Section: interpreters Installed-Size: 597 Maintainer: Debian Lua Team Architecture: amd64 Multi-Arch: same Source: luajit2 Version: 2.1-20230119-1 Replaces: libluajit-5.1-2 Provides: libluajit-5.1.so.2 Depends: libluajit2-5.1-common (= 2.1-20230119-1), libc6 (>= 2.34), libgcc-s1 (>= 3.3) Conflicts: libluajit-5.1-2 Description: OpenResty-maintained branch of LuaJIT (shared objects) LuaJIT implements the full set of language features defined by Lua 5.1. The virtual machine (VM) is API- and ABI-compatible to the standard Lua interpreter and can be deployed as a drop-in replacement. . This package contains an embeddable version of LuaJIT that can be used as a replacement of the standard liblua-5.1 shared library. Homepage: https://github.com/openresty/luajit2 Package: libluajit2-5.1-common Status: install ok installed Priority: optional Section: interpreters Installed-Size: 218 Maintainer: Debian Lua Team Architecture: all Multi-Arch: foreign Source: luajit2 Version: 2.1-20230119-1 Replaces: libluajit-5.1-common Conflicts: libluajit-5.1-common Description: OpenResty-maintained branch of LuaJIT (common files) This package contains files needed by the LuaJIT interpreter/jitter as well by its embeddable (i.e. library) version. Homepage: https://github.com/openresty/luajit2 Package: liblvm2cmd2.03 Status: install ok installed Priority: optional Section: libs Installed-Size: 3054 Maintainer: Debian LVM Team Architecture: amd64 Multi-Arch: same Source: lvm2 Version: 2.03.16-2 Depends: libaio1 (>= 0.3.93), libblkid1 (>= 2.24.2), libc6 (>= 2.34), libdevmapper-event1.02.1 (>= 2:1.02.74), libselinux1 (>= 3.1~), libsystemd0 (>= 233), libudev1 (>= 183), dmeventd Description: LVM2 command library This package contains the lvm2cmd shared library. Homepage: https://sourceware.org/lvm2/ Package: liblz4-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 169 Maintainer: Nobuhiro Iwamatsu Architecture: amd64 Multi-Arch: same Source: lz4 Version: 1.9.4-1 Replaces: liblz4-1a Depends: libc6 (>= 2.14) Breaks: liblz4-1a Description: Fast LZ compression algorithm library - runtime LZ4 is a very fast lossless compression algorithm, providing compression speed at 400 MB/s per core, scalable with multi-cores CPU. It also features an extremely fast decoder, with speed in multiple GB/s per core, typically reaching RAM speed limits on multi-core systems. . This package includes the shared library. Homepage: https://github.com/lz4/lz4 Package: liblzf1 Status: install ok installed Priority: optional Section: libs Installed-Size: 39 Maintainer: Timo Röhling Architecture: amd64 Multi-Arch: same Source: liblzf Version: 3.6-3 Depends: libc6 (>= 2.4) Description: Very small data compression library This library implements the very, very fast LZF compression algorithm written in C. Compression ratios are moderate with 40 to 50 percent for typical binary data, but decompression speed is basically at unoptimized memcpy speed. Homepage: http://software.schmorp.de/pkg/liblzf.html Package: liblzma5 Status: install ok installed Priority: optional Section: libs Installed-Size: 333 Maintainer: Sebastian Andrzej Siewior Architecture: amd64 Multi-Arch: same Source: xz-utils Version: 5.4.1-1 Depends: libc6 (>= 2.34) Breaks: liblzma2 (<< 5.1.1alpha+20110809-3~) Description: XZ-format compression library XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . The native format of liblzma is XZ; it also supports raw (headerless) streams and the older LZMA format used by lzma. (For 7-Zip's related format, use the p7zip package instead.) Homepage: https://tukaani.org/xz/ Package: liblzo2-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 174 Maintainer: Stephen Kitt Architecture: amd64 Multi-Arch: same Source: lzo2 Version: 2.10-2 Depends: libc6 (>= 2.14) Description: data compression library LZO is a portable, lossless data compression library. It offers pretty fast compression and very fast decompression. Decompression requires no memory. In addition there are slower compression levels achieving a quite competitive compression ratio while still decompressing at this very high speed. Homepage: https://www.oberhumer.com/opensource/lzo/ Package: libmagic-mgc Status: install ok installed Priority: optional Section: libs Installed-Size: 8130 Maintainer: Christoph Biedl Architecture: amd64 Multi-Arch: foreign Source: file Version: 1:5.44-3 Replaces: libmagic1 (<< 1:5.28-4~) Breaks: libmagic1 (<< 1:5.28-4~) Description: File type determination library using "magic" numbers (compiled magic file) This package provides the compiled magic file "magic.mgc". It has been separated from libmagic1 in order to meet the multiarch requirements without breaking applications that expect this file at its absolute path. Homepage: https://www.darwinsys.com/file/ Package: libmagic1 Status: install ok installed Priority: optional Section: libs Installed-Size: 232 Maintainer: Christoph Biedl Architecture: amd64 Multi-Arch: same Source: file Version: 1:5.44-3 Depends: libbz2-1.0, libc6 (>= 2.33), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.44-3) Suggests: file Conffiles: /etc/magic 272913026300e7ae9b5e2d51f138e674 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674 Description: Recognize the type of data in a file using "magic" numbers - library This library can be used to classify files according to magic number tests. It implements the core functionality of the file command. Homepage: https://www.darwinsys.com/file/ Package: libmagickcore-6.q16-6 Status: install ok installed Priority: optional Section: libs Installed-Size: 6647 Maintainer: ImageMagick Packaging Team Architecture: amd64 Multi-Arch: same Source: imagemagick Version: 8:6.9.11.60+dfsg-1.6+deb12u11 Depends: libbz2-1.0, libc6 (>= 2.35), libfftw3-double3 (>= 3.3.10), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libgcc-s1 (>= 3.3.1), libgomp1 (>= 6), libheif1 (>= 1.4.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.6), liblqr-1-0 (>= 0.4.0), libltdl7 (>= 2.4.7), liblzma5 (>= 5.1.1alpha+20120614), libopenjp2-7 (>= 2.0.0), libpng16-16 (>= 1.6.2-1), libtiff6 (>= 4.5.0~rc1), libwebp7 (>= 1.2.4), libwebpdemux2 (>= 1.2.4), libwebpmux3 (>= 1.2.4), libx11-6, libxext6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), imagemagick-6-common (>= 8:6.9.6.2+dfsg-3) Pre-Depends: dpkg (>= 1.17.6) Recommends: ghostscript, gsfonts Suggests: libmagickcore-6.q16-6-extra Description: low-level image manipulation library -- quantum depth Q16 The MagickCore API is a low-level interface between the C programming language and the ImageMagick image processing libraries and is recommended for wizard-level programmers only. Unlike the MagickWand C API which uses only a few opaque types and accessors, with MagickCore you almost exclusively access the structure members directly. . This package contains the C libraries needed to run executables that make use of MagickCore. . This version of libmagickcore is compiled for a channel depth of 16 bits (Q16). Homepage: https://www.imagemagick.org/ Package: libmagickwand-6.q16-6 Status: install ok installed Priority: optional Section: libs Installed-Size: 1387 Maintainer: ImageMagick Packaging Team Architecture: amd64 Multi-Arch: same Source: imagemagick Version: 8:6.9.11.60+dfsg-1.6+deb12u11 Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libmagickcore-6.q16-6 (>= 8:6.9.11.24), libx11-6, imagemagick-6-common (>= 8:6.9.6.2+dfsg-3) Pre-Depends: dpkg (>= 1.17.6) Description: image manipulation library -- quantum depth Q16 The MagickWand API is the recommended interface between the C programming language and the ImageMagick image processing libraries. Unlike the MagickCore C API, MagickWand uses only a few opaque types. Accessors are available to set or get important wand properties. . This package contains the C libraries needed to run executables that make use of MagickWand. . This version of libmagickwand is compiled for a channel depth of 16 bits (Q16). Homepage: https://www.imagemagick.org/ Package: libmail-authenticationresults-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 133 Maintainer: Debian Perl Group Architecture: all Version: 2.20230112-1 Depends: perl:any, libclone-perl, libjson-perl, libscalar-list-utils-perl Description: object oriented Authentication-Results headers Mail::AuthenticationResults provides a parser which copes with most styles of Authentication-Results header seen in the wild, but is not yet fully RFC7601 compliant . Differences from RFC7601 . key/value pairs are parsed when present in the authserv-id section, this is against RFC but has been seen in headers added by Yahoo!. . Comments added between key/value pairs will be added after them in the data structures and when stringified. Homepage: https://metacpan.org/release/Mail-AuthenticationResults Package: libmail-dkim-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 464 Maintainer: Debian Perl Group Architecture: all Version: 1.20230212-2~deb12u1 Depends: perl:any, libcrypt-openssl-rsa-perl, libdigest-sha-perl, liberror-perl, libgetopt-long-descriptive-perl, libmail-authenticationresults-perl, libmailtools-perl, libnet-dns-perl Description: module to cryptographically identify the sender of email RFC 4871, DomainKeys Identified Mail (DKIM), defines a domain-level authentication framework for email using public-key cryptography and key server technology to permit verification of the source and contents of messages by either Mail Transport Agents (MTAs) or Mail User Agents (MUAs). . Mail::DKIM is a Perl implementation created by Jason Long of Messiah College. It performs signing as well as signature verification. It also supports the older DomainKeys standard. . This library further includes support for adding and verifying Authenticated Received Chain (ARC; RFC 8617) assertions. Homepage: https://dkimproxy.sourceforge.net Package: libmailtools-perl Status: install ok installed Priority: optional Section: mail Installed-Size: 235 Maintainer: Debian Perl Group Architecture: all Version: 2.21-2 Depends: perl:any, libnet-perl, libnet-smtp-ssl-perl, libtest-simple-perl, libtimedate-perl Description: modules to manipulate email in perl programs MailTools is a set of perl modules which provide an easy interface to manipulating email in an object-oriented fashion. . Mail::Address - Parse mail addresses Mail::Cap - Parse mailcap files Mail::Field - Base class for manipulation of mail header fields Mail::Field::AddrList - object representation of e-mail address lists Mail::Field::Date - a date header field Mail::Field::Generic - implementation for inspecific fields Mail::Filter - Filter mail through multiple subroutines Mail::Header - manipulate MIME headers Mail::Internet - manipulate email messages Mail::Mailer - Simple interface to electronic mailing mechanisms Mail::Send - Simple electronic mail interface Mail::Util - mail utility functions Homepage: https://metacpan.org/release/MailTools Package: libmariadb3 Status: install ok installed Priority: optional Section: libs Installed-Size: 561 Maintainer: Debian MySQL Maintainers Architecture: amd64 Multi-Arch: same Source: mariadb Version: 1:10.11.14-0+deb12u2 Replaces: libmariadbclient18 Depends: mariadb-common, libc6 (>= 2.34), libssl3 (>= 3.0.0), zlib1g (>= 1:1.1.4) Breaks: libmariadbclient18 Conflicts: mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-5.1, mariadb-server-5.2, mariadb-server-5.3, mariadb-server-5.5 Description: MariaDB database client library MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. . This package includes the client library. Homepage: https://mariadb.org/ Package: libmaxminddb0 Status: install ok installed Priority: optional Section: libs Installed-Size: 76 Maintainer: Faidon Liambotis Architecture: amd64 Multi-Arch: same Source: libmaxminddb Version: 1.7.1-1 Depends: libc6 (>= 2.33) Suggests: mmdb-bin Description: IP geolocation database library The libmaxminddb library provides a C library for reading MaxMind DB files, including the GeoIP2 databases from MaxMind. This is a custom binary format designed to facilitate fast lookups of IP addresses while allowing for great flexibility in the type of data associated with an address. . The MaxMind DB format is an open format. The spec is available at http://maxmind.github.io/MaxMind-DB/. This spec is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License. Homepage: https://maxmind.github.io/libmaxminddb/ Package: libmbedcrypto7 Status: install ok installed Priority: optional Section: libs Installed-Size: 615 Maintainer: Andrea Pappacoda Architecture: amd64 Multi-Arch: same Source: mbedtls Version: 2.28.3-1 Depends: libc6 (>= 2.14) Description: lightweight crypto and SSL/TLS library - crypto library mbed TLS (formerly known as PolarSSL) is a lean open source crypto library for providing SSL and TLS support in your programs. It offers an intuitive API and documented header files, so you can actually understand what the code does. It features: - Symmetric algorithms, like AES, Blowfish, Triple-DES, DES, ARC4, Camellia and XTEA - Hash algorithms, like SHA-1, SHA-2, RIPEMD-160 and MD5 - Entropy pool and random generators, like CTR-DRBG and HMAC-DRBG - Public key algorithms, like RSA, Elliptic Curves, Diffie-Hellman, ECDSA and ECDH - TLS 1.0, 1.1 and 1.2 - Abstraction layers for ciphers, hashes, public key operations, platform abstraction and threading . This package contains the shared library handling cryptography. Homepage: https://www.trustedfirmware.org/projects/mbed-tls/ Package: libmbedtls-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 3621 Maintainer: Andrea Pappacoda Architecture: amd64 Multi-Arch: same Source: mbedtls Version: 2.28.3-1 Depends: libmbedcrypto7 (= 2.28.3-1), libmbedtls14 (= 2.28.3-1), libmbedx509-1 (= 2.28.3-1) Suggests: libmbedtls-doc Description: lightweight crypto and SSL/TLS library - development files mbed TLS (formerly known as PolarSSL) is a lean open source crypto library for providing SSL and TLS support in your programs. It offers an intuitive API and documented header files, so you can actually understand what the code does. It features: - Symmetric algorithms, like AES, Blowfish, Triple-DES, DES, ARC4, Camellia and XTEA - Hash algorithms, like SHA-1, SHA-2, RIPEMD-160 and MD5 - Entropy pool and random generators, like CTR-DRBG and HMAC-DRBG - Public key algorithms, like RSA, Elliptic Curves, Diffie-Hellman, ECDSA and ECDH - TLS 1.0, 1.1 and 1.2 - Abstraction layers for ciphers, hashes, public key operations, platform abstraction and threading . This package contains the header files and static libraries for mbed TLS. Homepage: https://www.trustedfirmware.org/projects/mbed-tls/ Package: libmbedtls14 Status: install ok installed Priority: optional Section: libs Installed-Size: 303 Maintainer: Andrea Pappacoda Architecture: amd64 Multi-Arch: same Source: mbedtls Version: 2.28.3-1 Depends: libc6 (>= 2.15), libmbedcrypto7 (>= 2.28.0), libmbedx509-1 (>= 2.28.0) Description: lightweight crypto and SSL/TLS library - tls library mbed TLS (formerly known as PolarSSL) is a lean open source crypto library for providing SSL and TLS support in your programs. It offers an intuitive API and documented header files, so you can actually understand what the code does. It features: - Symmetric algorithms, like AES, Blowfish, Triple-DES, DES, ARC4, Camellia and XTEA - Hash algorithms, like SHA-1, SHA-2, RIPEMD-160 and MD5 - Entropy pool and random generators, like CTR-DRBG and HMAC-DRBG - Public key algorithms, like RSA, Elliptic Curves, Diffie-Hellman, ECDSA and ECDH - TLS 1.0, 1.1 and 1.2 - Abstraction layers for ciphers, hashes, public key operations, platform abstraction and threading . This package contains the shared library handling TLS. Homepage: https://www.trustedfirmware.org/projects/mbed-tls/ Package: libmbedx509-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 236 Maintainer: Andrea Pappacoda Architecture: amd64 Multi-Arch: same Source: mbedtls Version: 2.28.3-1 Depends: libc6 (>= 2.33), libmbedcrypto7 (>= 2.28.0) Description: lightweight crypto and SSL/TLS library - x509 certificate library mbed TLS (formerly known as PolarSSL) is a lean open source crypto library for providing SSL and TLS support in your programs. It offers an intuitive API and documented header files, so you can actually understand what the code does. It features: - Symmetric algorithms, like AES, Blowfish, Triple-DES, DES, ARC4, Camellia and XTEA - Hash algorithms, like SHA-1, SHA-2, RIPEMD-160 and MD5 - Entropy pool and random generators, like CTR-DRBG and HMAC-DRBG - Public key algorithms, like RSA, Elliptic Curves, Diffie-Hellman, ECDSA and ECDH - TLS 1.0, 1.1 and 1.2 - Abstraction layers for ciphers, hashes, public key operations, platform abstraction and threading . This package contains the shared library handling x509 certificates. Homepage: https://www.trustedfirmware.org/projects/mbed-tls/ Package: libmd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 79 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: libmd Version: 1.0.4-2 Depends: libc6 (>= 2.33) Description: message digest functions from BSD systems - shared library The libmd library provides various message digest ("hash") functions, as found on various BSDs on a library with the same name and with a compatible API. Homepage: https://www.hadrons.org/software/libmd/ Package: libmemcached11 Status: install ok installed Priority: optional Section: libs Installed-Size: 222 Maintainer: Ondřej Surý Architecture: amd64 Multi-Arch: same Source: libmemcached Version: 1.1.4-1+0~20260506.6+debian12~1.gbp476b80 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libhashkit2, libsasl2-2 (>= 2.1.28+dfsg), libstdc++6 (>= 4.1.1) Description: C and C++ client library to the memcached server libmemcached is a C and C++ client library to the memcached server (http://memcached.org/). It has been designed to be light on memory usage, thread safe, and provide full access to server side methods. . A few notes on its design: . * Synchronous and Asynchronous support. * Access to large object support. * Local replication. * TCP and Unix Socket protocols. * A half dozen or so different tuneable hash algorithms. * Implementations of the new cas, replace, and append operators. * Man pages written up on entire API. * Implements both modulo and consistent hashing solutions. * Tools to Manage your Memcached networks. . This package provides the libmemcached shared library itself. Homepage: https://awesomized.github.io/libmemcached/ Package: libmfx1 Status: install ok installed Priority: optional Section: libs Installed-Size: 27346 Maintainer: Timo Aaltonen Architecture: amd64 Multi-Arch: same Source: intel-mediasdk Version: 22.5.4-1 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 12), libva2 (>= 2.9.0) Description: Intel Media SDK -- shared library Intel® Media SDK provides an API to access hardware-accelerated video decode, encode and filtering on Intel® platforms with integrated graphics. . Supported video encoders: HEVC, AVC, MPEG-2, JPEG Supported Video decoders: HEVC, AVC, VP8, MPEG-2, VC1, JPEG Supported video pre-processing filters: Color Conversion, Deinterlace, Denoise, Resize, Rotate, Composition . This package contains the shared library. Homepage: https://github.com/Intel-Media-SDK/MediaSDK Package: libmilter1.0.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 296 Maintainer: Debian QA Group Architecture: amd64 Multi-Arch: same Source: sendmail Version: 8.17.1.9-2+deb12u2 Depends: libc6 (>= 2.34) Description: Sendmail Mail Filter API (Milter) The Sendmail Mail Filter API (Milter) is designed to allow third-party programs access to mail messages as they are being processed in order to filter meta-information(headers) and content. . The Debian Sendmail package is built to support libmilter. . This package contains libmilter.so Homepage: http://www.sendmail.org Package: libminiupnpc17 Status: install ok installed Priority: optional Section: libs Installed-Size: 87 Maintainer: Thomas Goirand Architecture: amd64 Multi-Arch: same Source: miniupnpc (2.2.4-1) Version: 2.2.4-1+b1 Depends: libc6 (>= 2.17) Suggests: minissdpd Description: UPnP IGD client lightweight library The UPnP protocol is supported by most home adsl/cable routers and Microsoft Windows 2K/XP. The aim of the MiniUPnP project is to bring a free software solution to support the "Internet Gateway Device" part of the protocol. The MediaServer/MediaRenderer UPnP protocol is also becoming very popular. . Miniupnpc aims at the simplest library possible, with the smallest footprint and no dependencies to other libraries such as XML parsers or HTTP implementations. All the code is pure ANSI C. Compiled on a x86 PC, the miniupnp client library have less than 15KB code size. For instance, the upnpc sample program is around 20KB. The miniupnp daemon is much smaller than any other IGD daemon and is ideal for using on low memory device for this reason. . This package contains the shared library. Homepage: http://miniupnp.free.fr/ Package: libmnl0 Status: install ok installed Priority: optional Section: libs Installed-Size: 46 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Multi-Arch: same Source: libmnl Version: 1.0.4-3 Depends: libc6 (>= 2.14) Description: minimalistic Netlink communication library libmnl is a minimalistic user-space library oriented to Netlink developers. There are a lot of common tasks in parsing, validating, constructing of both the Netlink header and TLVs that are repetitive and easy to get wrong. This library aims to provide simple helpers that allows you to re-use code and to avoid re-inventing the wheel. . The main features of this library are: . Small: the shared library requires around 30KB for an x86-based computer. . Simple: this library avoids complexity and elaborated abstractions that tend to hide Netlink details. . Easy to use: the library simplifies the work for Netlink-wise developers. It provides functions to make socket handling, message building, validating, parsing and sequence tracking, easier. . Easy to re-use: you can use the library to build your own abstraction layer on top of this library. . Decoupling: the interdependency of the main bricks that compose the library is reduced, i.e. the library provides many helpers, but the programmer is not forced to use them. . This package contains the shared libraries needed to run programs that use the minimalistic Netlink communication library. Homepage: https://netfilter.org/projects/libmnl/ Package: libmodule-implementation-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 35 Maintainer: Debian Perl Group Architecture: all Version: 0.09-2 Depends: perl:any, libmodule-runtime-perl, libtry-tiny-perl Description: module for loading one of several alternate implementations of a module Module::Implementation abstracts out the process of choosing one of several underlying implementations for a module. This can be used to provide XS and pure Perl implementations of a module, or it could be used to load an implementation for a given OS or any other case of needing to provide multiple implementations. . This module is only useful when you know all the implementations ahead of time. If you want to load arbitrary implementations then you probably want something like a plugin system, not this module. Homepage: https://metacpan.org/release/Module-Implementation Package: libmodule-runtime-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 42 Maintainer: Debian Perl Group Architecture: all Version: 0.016-2 Depends: perl:any, libparams-classify-perl Description: Perl module for runtime module handling Module::Runtime deals with runtime handling of Perl modules, which are normally handled at compile time. . This module provide functions that can, for example, require or use modules at runtime, check for module names validity, compose module names and more. Homepage: https://metacpan.org/release/Module-Runtime Package: libmount1 Status: install ok installed Priority: optional Section: libs Installed-Size: 454 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.38.1-5+deb12u3 Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libselinux1 (>= 3.1~) Suggests: cryptsetup-bin Description: device mounting library This device mounting library is used by mount and umount helpers. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: libmp3lame0 Status: install ok installed Priority: optional Section: libs Installed-Size: 544 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: lame Version: 3.100-6 Depends: libc6 (>= 2.29) Description: MP3 encoding library LAME (recursive acronym for "LAME Ain't an MP3 Encoder") is a research project for learning about and improving MP3 encoding technology. LAME includes an MP3 encoding library, a simple frontend application, and other tools for sound analysis, as well as convenience tools. . This package contains the shared library. Homepage: https://lame.sourceforge.io/ Package: libmpc3 Status: install ok installed Priority: optional Section: libs Installed-Size: 149 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: mpclib3 Version: 1.3.1-1 Depends: libc6 (>= 2.4), libgmp10 (>= 2:6.2.1+dfsg1), libmpfr6 (>= 4.0.0) Description: multiple precision complex floating-point library MPC is a portable library written in C for arbitrary precision arithmetic on complex numbers providing correct rounding. For the time being, it contains all arithmetic operations over complex numbers, the exponential and the logarithm functions, the trigonometric and hyperbolic functions. . Ultimately, it should implement a multiprecision equivalent of the ISO C99 standard. . It builds upon the GNU MP and the MPFR libraries. Homepage: http://www.multiprecision.org/mpc/ Package: libmpfr6 Status: install ok installed Priority: optional Section: libs Installed-Size: 1177 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: mpfr4 Version: 4.2.0-1 Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg1) Breaks: libcgal13 (<< 4.11-2+b1), libflint-2.5.2 (<< 2.5.2-17+b2), libgiac0 (<< 1.2.3.57+dfsg1-2+b4), libgmp3 (<< 4.1.4-3), libmpc3 (<< 1.1.0-1~), libnormaliz3 (<< 3.5.1+ds-4), sagemath (<< 8.1-2+b2) Description: multiple precision floating-point computation MPFR provides a library for multiple-precision floating-point computation with correct rounding. The computation is both efficient and has a well-defined semantics. It copies the good ideas from the ANSI/IEEE-754 standard for double-precision floating-point arithmetic (53-bit mantissa). Homepage: https://www.mpfr.org/ Package: libmpg123-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 389 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: mpg123 Version: 1.31.2-1+deb12u1 Depends: libc6 (>= 2.33) Description: MPEG layer 1/2/3 audio decoder (shared library) mpg123 is a real time MPEG 1.0/2.0/2.5 audio player/decoder for layers 1, 2 and 3 (MPEG 1.0 layer 3 also known as MP3). . This package contains the C libraries needed to run executables that use the mpg123 library. Homepage: http://mpg123.org/ Package: libmsgpackc2 Status: install ok installed Priority: optional Section: libs Installed-Size: 59 Maintainer: James McCoy Architecture: amd64 Multi-Arch: same Source: msgpack-c Version: 4.0.0-3 Depends: libc6 (>= 2.14) Description: binary-based efficient object serialization library MessagePack is a binary-based efficient object serialization library. It enables to exchange structured objects between many languages like JSON. But unlike JSON, it is very fast and small. Homepage: https://github.com/msgpack/msgpack-c/ Package: libmysofa1 Status: install ok installed Priority: optional Section: libs Installed-Size: 1266 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libmysofa Version: 1.3.1~dfsg0-1 Depends: libc6 (>= 2.29), zlib1g (>= 1:1.1.4) Description: library to read HRTFs stored in the AES69-2015 SOFA format libmysofa is a light weight C-library intended to read SOFA (Spatially Oriented Format for Acoustics) files for spatial rendering. It hardly has any library dependencies and is suitable for embedded devices. . It reads SOFA files and checks whether the data complies to the "SimpleFreeFieldHRIR" conventions. In addition, it provides functions to look-up and interpolate the filters for a given orientation and to normalize the HRTFs (Head-Related Transfer Functions) to a reference level. . This package contains the shared objects necessary to run an application using libmysofa. Homepage: https://github.com/hoene/libmysofa Package: libnatpmp1 Status: install ok installed Priority: optional Section: libs Installed-Size: 31 Maintainer: Thomas Goirand Architecture: amd64 Multi-Arch: same Source: libnatpmp (20150609-7.1) Version: 20150609-7.1+b2 Depends: libc6 (>= 2.7) Suggests: minissdpd, natpmpc Description: portable and fully compliant implementation of NAT-PMP NAT-PMP is the direct concurrent to the UPnP IGD specification. It is providing a way to do NAT traversal. It is part of the Bonjour protocol specifications. At the moment it is mainly supported by Apple software and hardware. For a way to add NAT-PMP capabilities to your *BSD, Linux or (Open)Solaris Router, you should have a look at MiniUPnPd which is supporting NAT-PMP in addition to UPnP since December 2007 ! . libnatpmp is an attempt to make a portable and fully compliant implementation of the protocol NAT-PMP for the client side. It is based on non blocking sockets and all calls of the API are asynchronous. It is therefore very easy to integrate the NAT-PMP code to any event driven code. . This package contains the shared library. Homepage: http://miniupnp.free.fr/libnatpmp.html Package: libncurses6 Status: install ok installed Priority: optional Section: libs Installed-Size: 335 Maintainer: Craig Small Architecture: amd64 Multi-Arch: same Source: ncurses Version: 6.4-4 Depends: libtinfo6 (= 6.4-4), libc6 (>= 2.34) Recommends: libgpm2 Breaks: cowdancer (<< 0.89~) Description: shared libraries for terminal handling The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the shared libraries necessary to run programs compiled with ncurses. Homepage: https://invisible-island.net/ncurses/ Package: libncursesw6 Status: install ok installed Priority: optional Section: libs Installed-Size: 412 Maintainer: Craig Small Architecture: amd64 Multi-Arch: same Source: ncurses Version: 6.4-4 Depends: libtinfo6 (= 6.4-4), libc6 (>= 2.34) Recommends: libgpm2 Description: shared libraries for terminal handling (wide character support) The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the shared libraries necessary to run programs compiled with ncursesw, which includes support for wide characters. Homepage: https://invisible-island.net/ncurses/ Package: libnet-dns-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 1039 Maintainer: Debian Perl Group Architecture: all Version: 1.36-1 Depends: perl:any, libdigest-hmac-perl, libdigest-sha-perl, libencode-perl, libio-socket-ip-perl, libscalar-list-utils-perl Recommends: libdigest-bubblebabble-perl, libnet-dns-sec-perl, libnet-libidn2-perl | libnet-libidn-perl, libperl4-corelibs-perl Description: module to perform DNS queries Net::DNS is a DNS resolver implemented in Perl supporting IPv6. It allows the programmer to perform nearly any type of DNS query from a Perl script. Homepage: https://www.net-dns.org/ Package: libnet-smtp-ssl-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 20 Maintainer: Debian Perl Group Architecture: all Version: 1.04-2 Depends: libio-socket-ssl-perl, perl:any Recommends: libauthen-sasl-perl Description: Perl module providing SSL support to Net::SMTP Net::SMTP::SSL implements the same API as Net::SMTP, but uses IO::Socket::SSL for its network operations. Due to the nature of Net::SMTP's new method, it is not overridden to make use of a default port for the SMTPS service. Perhaps future versions will be smart like that. Port 465 is usually what you want, and it's not a pain to specify that. . This package is deprecated. Net::SMTP (in perl core) has support for SMTP over SSL, and also for STARTTLS, since version 1.28 (included in Perl 5.22). Homepage: https://metacpan.org/release/Net-SMTP-SSL Package: libnet-ssleay-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 1264 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Source: libnet-ssleay-perl (1.92-2) Version: 1.92-2+b1 Depends: perl (>= 5.36.0-4), perl-openssl-abi-3, perlapi-5.36.0, libc6 (>= 2.14), libssl3 (>= 3.0.0) Description: Perl module for Secure Sockets Layer (SSL) Net::SSLeay is a perl module that allows you to call Secure Sockets Layer (SSL) functions of the SSLeay library directly from your perl scripts. It is useful if you want to program robots that access secure web servers or if you want to build your own applications over SSL encrypted tunnels. If you just want to view web pages on https servers, you do not need this - your web browser already knows to do that. Homepage: https://metacpan.org/release/Net-SSLeay Package: libnetaddr-ip-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 321 Maintainer: Debian Perl Group Architecture: amd64 Source: libnetaddr-ip-perl (4.079+dfsg-2) Version: 4.079+dfsg-2+b1 Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.4) Recommends: libsocket6-perl Description: IP address manipulation module NetAddr::IP provides an object-oriented abstraction on top of IP addresses or IP subnets, that allows for easy manipulations. . The internal representation of all IP objects is in 128 bit IPv6 notation. IPv4 and IPv6 objects may be freely mixed. . The following operations are supported: Basic IP conversion, netmask manipulation, subnet interpretation, bitwise mask generation, full mask generation, subnet manipulation, expansion, and range operations, sub/supernet tests, data type determination, and more complex operations such as expansion of netblocks into arrays of smaller blocks of arbitrary size, and CIDR block aggregation Homepage: https://metacpan.org/release/NetAddr-IP Package: libnetfilter-conntrack3 Status: install ok installed Priority: optional Section: libs Installed-Size: 139 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Multi-Arch: same Source: libnetfilter-conntrack Version: 1.0.9-3 Depends: libc6 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnfnetlink0 (>= 1.0.2) Description: Netfilter netlink-conntrack library libnetfilter_conntrack is a userspace library providing a programming interface (API) to the in-kernel connection tracking state table. Homepage: https://www.netfilter.org/projects/libnetfilter_conntrack/ Package: libnettle8 Status: install ok installed Priority: optional Section: libs Installed-Size: 520 Maintainer: Magnus Holmgren Architecture: amd64 Multi-Arch: same Source: nettle Version: 3.8.1-2 Depends: libc6 (>= 2.17) Description: low level cryptographic library (symmetric and one-way cryptos) Nettle is a cryptographic library that is designed to fit easily in more or less any context: In crypto toolkits for object-oriented languages (C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel space. . It tries to solve a problem of providing a common set of cryptographic algorithms for higher-level applications by implementing a context-independent set of cryptographic algorithms. In that light, Nettle doesn't do any memory allocation or I/O, it simply provides the cryptographic algorithms for the application to use in any environment and in any way it needs. . This package contains the symmetric and one-way cryptographic algorithms. To avoid having this package depend on libgmp, the asymmetric cryptos reside in a separate library, libhogweed. Homepage: http://www.lysator.liu.se/~nisse/nettle/ Package: libnewt0.52 Status: install ok installed Priority: optional Section: libs Installed-Size: 365 Maintainer: Alastair McKinstry Architecture: amd64 Multi-Arch: same Source: newt (0.52.23-1) Version: 0.52.23-1+b1 Depends: libc6 (>= 2.34), libslang2 (>= 2.2.4) Recommends: libfribidi0 Description: Not Erik's Windowing Toolkit - text mode windowing with slang Newt is a windowing toolkit for text mode built from the slang library. It allows color text mode applications to easily use stackable windows, push buttons, check boxes, radio buttons, lists, entry fields, labels, and displayable text. Scrollbars are supported, and forms may be nested to provide extra functionality. This package contains the shared library for programs that have been built with newt. Homepage: https://pagure.io/newt Package: libnfnetlink0 Status: install ok installed Priority: optional Section: libs Installed-Size: 51 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Multi-Arch: same Source: libnfnetlink Version: 1.0.2-2 Depends: libc6 (>= 2.14) Description: Netfilter netlink library libnfnetlink is the low-level library for netfilter related kernel/userspace communication. It provides a generic messaging infrastructure for in-kernel netfilter subsystems (such as nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their respective users and/or management tools in userspace. Homepage: https://git.netfilter.org/libnfnetlink Package: libnftables1 Status: install ok installed Priority: optional Section: libs Installed-Size: 920 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Multi-Arch: same Source: nftables Version: 1.0.6-2+deb12u2 Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg1), libjansson4 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnftnl11 (>= 1.2.2), libxtables12 (>= 1.6.0+snapshot20161117) Description: Netfilter nftables high level userspace API library This library provides high level semantics to interact with the nftables framework by Netfilter project. . nftables replaces the old popular iptables, ip6tables, arptables and ebtables. . Netfilter software and nftables in particular are used in applications such as Internet connection sharing, firewalls, IP accounting, transparent proxying, advanced routing and traffic control. . A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended. . This package contains the libnftables library. Homepage: https://www.netfilter.org/ Package: libnftnl11 Status: install ok installed Priority: optional Section: libs Installed-Size: 233 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Multi-Arch: same Source: libnftnl Version: 1.2.4-2 Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~) Description: Netfilter nftables userspace API library libnftnl is the low-level library for Netfilter 4th generation framework nftables. . Is the user-space library for low-level interaction with nftables Netlink's API over libmnl. Homepage: https://git.netfilter.org/libnftnl Package: libnghttp2-14 Status: install ok installed Priority: optional Section: libs Installed-Size: 220 Maintainer: Tomasz Buchert Architecture: amd64 Multi-Arch: same Source: nghttp2 Version: 1.52.0-1+deb12u3 Depends: libc6 (>= 2.17) Description: library implementing HTTP/2 protocol (shared library) This is an implementation of the Hypertext Transfer Protocol version 2 in C. The framing layer of HTTP/2 is implemented as a reusable C library. . This package installs a shared library. Homepage: https://nghttp2.org/ Package: libnginx-mod-http-auth-pam Status: install ok installed Priority: optional Section: httpd Installed-Size: 35 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:1.5.3-3 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14), libpam0g (>= 0.99.7.1) Recommends: nginx Description: PAM authentication module for Nginx The nginx_http_auth_pam module enables authentication using PAM. . The module uses PAM as a backend for simple http authentication. It also allows setting the pam service name to allow more fine grained control. Homepage: https://github.com/sto/ngx_http_auth_pam_module Package: libnginx-mod-http-cache-purge Status: install ok installed Priority: optional Section: httpd Installed-Size: 42 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:2.3-4 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14) Recommends: nginx Description: Purge content from Nginx caches Cache Purge module adds purging capabilities to Nginx. It allows purging content from caches used by all of Nginx proxy modules, like FastCGI, Proxy, SCGI and uWSGI. Homepage: https://github.com/FRiCKLE/ngx_cache_purge Package: libnginx-mod-http-dav-ext Status: install ok installed Priority: optional Section: httpd Installed-Size: 55 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:3.0.0-3 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.33), libxml2 (>= 2.7.4) Recommends: nginx Description: WebDAV missing commands support for Nginx WebDAV Ext module complements the Nginx WebDAV module to provide a full WebDAV support. . WebDAV Ext provides the missing PROPFIND & OPTIONS methods. Homepage: https://github.com/arut/nginx-dav-ext-module Package: libnginx-mod-http-echo Status: install ok installed Priority: optional Section: httpd Installed-Size: 68 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:0.63-4 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14) Recommends: nginx Description: Bring echo and more shell style goodies to Nginx Echo module wraps lots of Nginx internal APIs for streaming input and output, parallel/sequential subrequests, timers and sleeping, as well as various meta data accessing. . Basically it provides various utilities that help testing and debugging of other modules by trivially emulating different kinds of faked subrequest locations. . People will also find it useful in real-world applications that need to: . 1. Serve static contents directly from memory. 2. Wrap the upstream response with custom header and footer (kinda like the addition module but with contents read directly from the config file and Nginx variables). 3. Merge contents of various "Nginx locations" (i.e., subrequests) together in a single main request (using echo_location and its friends). Homepage: https://github.com/agentzh/echo-nginx-module Package: libnginx-mod-http-fancyindex Status: install ok installed Priority: optional Section: httpd Installed-Size: 55 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:0.5.2-3 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.33) Suggests: nginx Description: Fancy indexes module for the Nginx The Fancy Index module makes possible the generation of file listings, like the built-in autoindex module does, but adding a touch of style by introducing ways to customize the result. Homepage: https://github.com/aperezdc/ngx-fancyindex Package: libnginx-mod-http-geoip Status: install ok installed Priority: optional Section: httpd Installed-Size: 120 Maintainer: Debian Nginx Maintainers Architecture: amd64 Source: nginx Version: 1.22.1-9+deb12u8 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14), libgeoip1 (>= 1.6.12) Recommends: nginx Description: GeoIP HTTP module for Nginx The ngx_http_geoip module creates variables with values depending on the client IP address, using the precompiled MaxMind databases. . Those variables include country, region, city, latitude, longitude, postal code, etc. Homepage: https://nginx.org Package: libnginx-mod-http-geoip2 Status: install ok installed Priority: optional Section: httpd Installed-Size: 37 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:3.4-3 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.33), libmaxminddb0 (>= 1.0.2) Recommends: nginx Description: GeoIP2 HTTP module for Nginx The ngx_http_geoip2 module creates variables with values depending on the client IP address, using the precompiled MaxMind GeoIP2 databases. . Those variables include country, region, city, latitude, longitude, postal code, etc. Homepage: https://github.com/leev/ngx_http_geoip2_module Package: libnginx-mod-http-headers-more-filter Status: install ok installed Priority: optional Section: httpd Installed-Size: 51 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:0.34-3 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14) Recommends: nginx Description: Set and clear input and output headers for Nginx The Headers More module allows you to add, set, or clear any output or input header that you specify. . This is an enhanced version of the standard headers module because it provides more utilities like resetting or clearing "builtin headers" like Content-Type, Content-Length, and Server. Homepage: https://github.com/openresty/headers-more-nginx-module Package: libnginx-mod-http-image-filter Status: install ok installed Priority: optional Section: httpd Installed-Size: 127 Maintainer: Debian Nginx Maintainers Architecture: amd64 Source: nginx Version: 1.22.1-9+deb12u8 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14), libgd3 (>= 2.1.0~alpha~) Recommends: nginx Description: HTTP image filter module for Nginx The ngx_http_image_filter module is a filter that transforms images in JPEG, GIF, and PNG formats. . The module supports filters such as rotate, resize, crop, quality, sharpening, interlacing and more. Homepage: https://nginx.org Package: libnginx-mod-http-lua Status: install ok installed Priority: optional Section: httpd Installed-Size: 460 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:0.10.23-1+deb12u1 Depends: libnginx-mod-http-ndk, lua-resty-core (<< 0.1.25.1~), lua-resty-core (>= 0.1.25), nginx-abi-1.22.1-7, libc6 (>= 2.33), libluajit2-5.1-2 (>= 2.1-20220411) | libluajit-5.1-2 (>= 2.1.0~beta3), libpcre3 Recommends: nginx Description: Lua module for Nginx Embed Lua runtime into nginx. . This module embeds Lua, via LuaJIT 2-5.1, into Nginx and by leveraging Nginx's subrequests, allows the integration of the powerful Lua threads (Lua coroutines) into the Nginx event model. Homepage: https://github.com/openresty/lua-nginx-module Package: libnginx-mod-http-ndk Status: install ok installed Priority: optional Section: httpd Installed-Size: 42 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:0.3.2-3 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14) Recommends: nginx Description: Nginx Development Kit module The NDK is an Nginx module that is designed to extend the core functionality of the excellent Nginx webserver in a way that can be used as a basis of other Nginx modules. . It has functions and macros to deal with generic tasks that don't currently have generic code as part of the core distribution. The NDK itself adds few features that are seen from a user's point of view - it's just designed to help reduce the code that Nginx module developers need to write. Homepage: https://github.com/simpl/ngx_devel_kit Package: libnginx-mod-http-perl Status: install ok installed Priority: optional Section: httpd Installed-Size: 172 Maintainer: Debian Nginx Maintainers Architecture: amd64 Source: nginx Version: 1.22.1-9+deb12u8 Depends: nginx-abi-1.22.1-7, perl (>= 5.36.0-7+deb12u3), perlapi-5.36.0, libc6 (>= 2.34), libperl5.36 (>= 5.36.0) Recommends: nginx Description: Perl module for Nginx Embed Perl runtime into nginx. . The ngx_http_perl module is used to implement location and variable handlers in Perl and insert Perl calls into SSI. . Note that this module is marked experimental. Homepage: https://nginx.org Package: libnginx-mod-http-subs-filter Status: install ok installed Priority: optional Section: httpd Installed-Size: 41 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:0.6.4-4 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14) Recommends: nginx Description: Substitution filter module for Nginx Substitution Nginx module can do both regular expression and fixed string substitutions on response bodies. The module is quite different from Nginx's native Substitution module. It scans the output chains buffer and matches string line by line, just like Apache's mod_substitute. Homepage: https://github.com/yaoweibin/ngx_http_substitutions_filter_module Package: libnginx-mod-http-uploadprogress Status: install ok installed Priority: optional Section: httpd Installed-Size: 53 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:0.9.2-3 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14) Recommends: nginx Description: Upload progress system for Nginx Upload progress module is an implementation of an upload progress system, that monitors RFC1867 POST uploads as they are transmitted to upstream servers. . It works by tracking the uploads proxied by Nginx to upstream servers without analysing the uploaded content and offers a web API to report upload progress in Javscript, Json or any other format. Homepage: https://github.com/masterzen/nginx-upload-progress-module Package: libnginx-mod-http-upstream-fair Status: install ok installed Priority: optional Section: httpd Installed-Size: 37 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:0.0~git20120408.a18b409-3 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.4) Recommends: nginx Description: Nginx Upstream Fair Proxy Load Balancer The Nginx fair proxy balancer enhances the standard round-robin load balancer provided with Nginx so that it tracks busy backend servers and adjusts balancing accordingly. Homepage: https://github.com/gnosek/nginx-upstream-fair Package: libnginx-mod-http-xslt-filter Status: install ok installed Priority: optional Section: httpd Installed-Size: 123 Maintainer: Debian Nginx Maintainers Architecture: amd64 Source: nginx Version: 1.22.1-9+deb12u8 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25) Recommends: nginx Description: XSLT Transformation module for Nginx The ngx_http_xslt_filter module is a filter that transforms XML responses using one or more XSLT stylesheets. . The transformation can be adjusted by setting the relevant configuration parameters. Homepage: https://nginx.org Package: libnginx-mod-mail Status: install ok installed Priority: optional Section: httpd Installed-Size: 215 Maintainer: Debian Nginx Maintainers Architecture: amd64 Source: nginx Version: 1.22.1-9+deb12u8 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14) Recommends: nginx Description: Mail module for Nginx The nginx_mail module adds mail proxy support to nginx. . The module supports proxying all the standard mail protocols such as IMAP, POP3 & SMTP. Homepage: https://nginx.org Package: libnginx-mod-nchan Status: install ok installed Priority: optional Section: httpd Installed-Size: 735 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1:1.3.6+dfsg-2 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.29) Recommends: nginx Description: Fast, flexible pub/sub server for Nginx Nchan is a scalable, flexible pub/sub server for the modern web, It can be configured as a standalone server, or as a shim between your application and tens, thousands, or millions of live subscribers. It can buffer messages in memory, on-disk, or via Redis. All connections are handled asynchronously and distributed among any number of worker processes. It can also scale to many nginx server instances with Redis. . Full documentation available at https://nchan.slact.net Homepage: https://github.com/slact/nchan Package: libnginx-mod-stream Status: install ok installed Priority: optional Section: httpd Installed-Size: 286 Maintainer: Debian Nginx Maintainers Architecture: amd64 Source: nginx Version: 1.22.1-9+deb12u8 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.33) Recommends: nginx Description: Stream module for Nginx The nginx_stream module adds stream proxy support to nginx. . Stream module supports loadbalancing & proxying to TCP servers. The module also supports ACLs/connection limiting and configuring multiple operational parameters. Homepage: https://nginx.org Package: libnginx-mod-stream-geoip Status: install ok installed Priority: optional Section: httpd Installed-Size: 120 Maintainer: Debian Nginx Maintainers Architecture: amd64 Source: nginx Version: 1.22.1-9+deb12u8 Depends: nginx-abi-1.22.1-7, libc6 (>= 2.14), libgeoip1 (>= 1.6.12), libnginx-mod-stream (= 1.22.1-9+deb12u8) Recommends: nginx Description: GeoIP Stream module for Nginx The ngx_stream_geoip module creates variables with values depending on the client IP address, using the precompiled MaxMind databases. . Those variables include country, region, city, latitude, longitude, postal code, etc. Homepage: https://nginx.org Package: libnginx-mod-stream-geoip2 Status: install ok installed Priority: optional Section: httpd Installed-Size: 37 Maintainer: Debian Nginx Maintainers Architecture: amd64 Multi-Arch: foreign Source: libnginx-mod-http-geoip2 Version: 1:3.4-3 Depends: libnginx-mod-stream (<< 1.22.1.1~), libnginx-mod-stream (>= 1.22.1), nginx-abi-1.22.1-7, libc6 (>= 2.33), libmaxminddb0 (>= 1.0.2) Recommends: nginx Description: GeoIP2 Stream module for Nginx The ngx_stream_geoip2 module creates variables with values depending on the client IP address, using the precompiled MaxMind GeoIP2 databases. . Those variables include country, region, city, latitude, longitude, postal code, etc. Homepage: https://github.com/leev/ngx_http_geoip2_module Package: libnl-3-200 Status: install ok installed Priority: optional Section: libs Installed-Size: 182 Maintainer: Heiko Stuebner Architecture: amd64 Multi-Arch: same Source: libnl3 (3.7.0-0.2) Version: 3.7.0-0.2+b1 Depends: libc6 (>= 2.34) Conffiles: /etc/libnl-3/classid 3e07259e58674631830b152e983ca995 /etc/libnl-3/pktloc 7613dbc41b2dc3258195b6b6abd0f179 Description: library for dealing with netlink sockets This is a library for applications dealing with netlink sockets. The library provides an interface for raw netlink messaging and various netlink family specific interfaces. Homepage: http://www.infradead.org/~tgr/libnl/ Package: libnl-genl-3-200 Status: install ok installed Priority: optional Section: libs Installed-Size: 58 Maintainer: Heiko Stuebner Architecture: amd64 Multi-Arch: same Source: libnl3 (3.7.0-0.2) Version: 3.7.0-0.2+b1 Depends: libnl-3-200 (= 3.7.0-0.2+b1), libc6 (>= 2.4) Description: library for dealing with netlink sockets - generic netlink This is a library for applications dealing with netlink sockets. The library provides an interface for raw netlink messaging and various netlink family specific interfaces. . API to the generic netlink protocol, an extended version of the netlink protocol. Homepage: http://www.infradead.org/~tgr/libnl/ Package: libnorm1 Status: install ok installed Priority: optional Section: libs Installed-Size: 506 Maintainer: Luca Boccassi Architecture: amd64 Multi-Arch: same Source: norm Version: 1.5.9+dfsg-2 Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.0), libstdc++6 (>= 5) Description: NACK-Oriented Reliable Multicast (NORM) library The NORM protocol is designed to provide end-to-end reliable transport of bulk data objects or streams over generic IP multicast routing and forwarding services. libnorm provides a shared library and an API to use such protocol. Homepage: https://www.nrl.navy.mil/itd/ncs/products/norm Package: libnpth0 Status: install ok installed Priority: optional Section: libs Installed-Size: 50 Maintainer: Eric Dorland Architecture: amd64 Multi-Arch: same Source: npth Version: 1.6-3 Depends: libc6 (>= 2.17) Description: replacement for GNU Pth using system threads nPth is a non-preemptive threads implementation using an API very similar to the one known from GNU Pth. It has been designed as a replacement of GNU Pth for non-ancient operating systems. In contrast to GNU Pth it is based on the system's standard threads implementation. Thus nPth allows the use of libraries which are not compatible to GNU Pth. Homepage: https://www.gnupg.org/ Package: libnsl-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 345 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: same Source: libnsl Version: 1.3.0-2 Replaces: libc6-dev (<< 2.31-4) Depends: libnsl2 (= 1.3.0-2), libtirpc-dev Breaks: libc6-dev (<< 2.31-4) Description: libnsl development files This package contains the files needed for developing applications that use libnsl. Homepage: https://github.com/thkukuk/libnsl Package: libnsl2 Status: install ok installed Priority: optional Section: libs Installed-Size: 127 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: same Source: libnsl Version: 1.3.0-2 Depends: libc6 (>= 2.14), libtirpc3 (>= 1.0.2) Description: Public client interface for NIS(YP) and NIS+ This package contains the libnsl library, which contains the public client interface for NIS(YP) and NIS+. This code was formerly part of glibc, but is now standalone to be able to link against TI-RPC for IPv6 support. Homepage: https://github.com/thkukuk/libnsl Package: libnss-systemd Status: install ok installed Priority: standard Section: admin Installed-Size: 389 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: same Source: systemd Version: 252.39-1~deb12u2 Depends: libc6 (>= 2.34), libcap2 (>= 1:2.10), systemd (= 252.39-1~deb12u2) Description: nss module providing dynamic user and group name resolution nss-systemd is a plug-in module for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc), providing UNIX user and group name resolution for dynamic users and groups allocated through the DynamicUser= option in systemd unit files. See systemd.exec(5) for details on this option. . Installing this package automatically adds the module to /etc/nsswitch.conf. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: libnuma1 Status: install ok installed Priority: optional Section: libs Installed-Size: 71 Maintainer: Ian Wienand Architecture: amd64 Multi-Arch: same Source: numactl Version: 2.0.16-1 Depends: libc6 (>= 2.34) Description: Libraries for controlling NUMA policy Library to control specific NUMA (Non-Uniform Memory Architecture) scheduling or memory placement policies. Homepage: https://github.com/numactl/numactl Package: liboath0 Status: install ok installed Priority: optional Section: libs Installed-Size: 171 Maintainer: OATH Toolkit Team Architecture: amd64 Multi-Arch: same Source: oath-toolkit Version: 2.6.7-3.1+deb12u1 Depends: libc6 (>= 2.33) Description: OATH Toolkit Liboath library OATH Toolkit provide components to build one-time password authentication systems. It contains shared C libraries, command line tools and a PAM module. Supported technologies include the event-based HOTP algorithm (RFC 4226), the time-based TOTP algorithm (RFC 6238), and Portable Symmetric Key Container (PSKC, RFC 6030) to manage secret key data. OATH stands for Open AuTHentication, which is the organization that specify the algorithms. . This package includes the Liboath shared library that is used by applications. You normally don't need to install it manually. Homepage: https://www.nongnu.org/oath-toolkit/ Package: libobjc4 Status: install ok installed Priority: optional Section: libs Installed-Size: 205 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34), libgc1 (>= 1:7.2d), libgcc-s1 (>= 3.0) Description: Runtime library for GNU Objective-C applications Library needed for GNU ObjC applications linked against the shared library. Homepage: http://gcc.gnu.org/ Package: libogg0 Status: install ok installed Priority: optional Section: libs Installed-Size: 61 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libogg Version: 1.3.5-3 Depends: libc6 (>= 2.14) Description: Ogg bitstream library Libogg is a library for manipulating ogg bitstreams. It handles both making ogg bitstreams and getting packets from ogg bitstreams. Homepage: https://xiph.org/ogg/ Package: libonig5 Status: install ok installed Priority: optional Section: libs Installed-Size: 666 Maintainer: Jörg Frings-Fürst Architecture: amd64 Multi-Arch: same Source: libonig Version: 6.9.8-1 Depends: libc6 (>= 2.14) Description: regular expressions library Oniguruma is a library for working with regular expressions. . Different character encoding for every regular expression object can be specified. Homepage: https://github.com/kkos/oniguruma Package: libopenal-data Status: install ok installed Priority: optional Section: libs Installed-Size: 207 Maintainer: Debian Games Team Architecture: all Multi-Arch: foreign Source: openal-soft Version: 1:1.19.1-2 Replaces: libopenal1 (<< 1:1.14-5) Breaks: libopenal1 (<< 1:1.14-5) Conffiles: /etc/openal/alsoft.conf d1bc9fa6aeada2951603d417e2993afe Description: Software implementation of the OpenAL audio API (data files) OpenAL, the Open Audio Library, is a joint effort to create an open, vendor-neutral, cross-platform API for interactive, primarily spatialized audio. OpenAL's primary audience are application developers and desktop users that rely on portable standards like OpenGL, for games and other multimedia applications. . This package installs data files used by the OpenAL Soft shared library. Homepage: http://kcat.strangesoft.net/openal.html Package: libopenal1 Status: install ok installed Priority: optional Section: libs Installed-Size: 963 Maintainer: Debian Games Team Architecture: amd64 Multi-Arch: same Source: openal-soft Version: 1:1.19.1-2 Depends: libopenal-data (= 1:1.19.1-2), libc6 (>= 2.27), libsndio7.0 (>= 1.1.0) Recommends: libasound2 (>= 1.0.16), libpulse0 (>= 0.99.1) Suggests: libportaudio2 (>= 19+svn20101113) Description: Software implementation of the OpenAL audio API (shared library) OpenAL, the Open Audio Library, is a joint effort to create an open, vendor-neutral, cross-platform API for interactive, primarily spatialized audio. OpenAL's primary audience are application developers and desktop users that rely on portable standards like OpenGL, for games and other multimedia applications. . This library is meant as a compatible update/replacement to the OpenAL Sample Implementation (the SI). The SI has been unmaintained for quite a while, and would require a lot of work to clean up. This is a fork the old Windows version to attempt an accelerated ALSA version of an OpenAL implementation. . OpenAL Soft supports mono, stereo, 4-channel, 5.1, 6.1, and 7.1 output, as opposed to the SI's 4-channel max (though it did have some provisions for 6 channel, this was not 5.1, and was seemingly a "late" addition). OpenAL Soft does not support the Vorbis and MP3 extensions, however those were considered deprecated even in the SI. It does, though, support some of the newer extensions like AL_EXT_FLOAT32 and AL_EXT_MCFORMATS for multi-channel and floating-point formats, as well as ALC_EXT_EFX for environmental audio effects, and others. . This package installs the OpenAL Soft shared library. Homepage: http://kcat.strangesoft.net/openal.html Package: libopendbx1 Status: install ok installed Priority: optional Section: libs Installed-Size: 121 Maintainer: Debian QA Group Architecture: amd64 Source: libopendbx (1.4.6-16) Version: 1.4.6-16+b1 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 5.2) Recommends: libopendbx1-sqlite3 | libopendbx1-backend Description: Lightweight database access abstraction layer OpenDBX provides a simple and lightweight API for interfacing native relational database APIs in a consistent way. By using the OpenDBX API you don't have to adapt your program to the different database APIs by yourself. . The sqlite3 backend is recommended by default if no other backend is installed with libopendbx1 Homepage: http://www.linuxnetworks.de/doc/index.php/OpenDBX Package: libopendkim11 Status: install ok installed Priority: optional Section: libs Installed-Size: 177 Maintainer: David Bürgin Architecture: amd64 Multi-Arch: same Source: opendkim Version: 2.11.0~beta2-8+deb12u1 Depends: libbsd0 (>= 0.0), libc6 (>= 2.34), libdb5.3, libssl3 (>= 3.0.0) Description: DomainKeys Identified Mail (DKIM) library The OpenDKIM Project is a community effort to develop and maintain a C library for producing DKIM-aware applications and an open source milter for providing DomainKeys Identified Mail (DKIM) service. . This package provides library for implementing signing and verification of the DomainKeys Identified Mail (DKIM) standard. This library provides support for signing and verifying signatures according to RFC 4871, and supports both DomainKeys signing policy and DKIM ADSP. Homepage: http://www.opendkim.org/ Package: libopenjp2-7 Status: install ok installed Priority: optional Section: libs Installed-Size: 479 Maintainer: Debian PhotoTools Maintainers Architecture: amd64 Multi-Arch: same Source: openjpeg2 Version: 2.5.0-2+deb12u3 Depends: libc6 (>= 2.34) Description: JPEG 2000 image compression/decompression library OpenJPEG is a library for handling the JPEG 2000 image compression format. JPEG 2000 is a wavelet-based image compression standard and permits progressive transmission by pixel and resolution accuracy for progressive downloads of an encoded image. It supports lossless and lossy compression, supports higher compression than JPEG 1991, and has resilience to errors in the image. . This package contains the runtime files for openjpeg 2.x Homepage: https://www.openjpeg.org Package: libopenmpt0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1951 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libopenmpt Version: 0.6.9-1 Depends: libc6 (>= 2.32), libgcc-s1 (>= 4.0), libmpg123-0 (>= 1.28.0), libstdc++6 (>= 11), libvorbis0a (>= 1.1.2), libvorbisfile3 (>= 1.1.2), zlib1g (>= 1:1.1.4) Description: module music library based on OpenMPT -- shared library libopenmpt is a cross-platform C++ and C library to decode tracked music files (modules) into a raw PCM audio stream. It is based on the player code of the OpenMPT project, a descendant of the original ModPlug Tracker. . This package contains the main shared library. Homepage: https://lib.openmpt.org/libopenmpt/ Package: libopus0 Status: install ok installed Priority: optional Section: libs Installed-Size: 400 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: opus Version: 1.3.1-3 Depends: libc6 (>= 2.29) Suggests: opus-tools Description: Opus codec runtime library The Opus codec is designed for interactive speech and audio transmission over the Internet. It is designed by the IETF Codec Working Group and incorporates technology from Skype's SILK codec and Xiph.Org's CELT codec. . It is intended to suit a wide range of interactive audio applications, including Voice over IP, videoconferencing, in-game chat, and even remote live music performances. It can scale from low bit-rate narrowband speech to very high quality stereo music. The current features are: . Bit-rates from 6 kb/s 510 kb/s Sampling rates from 8 to 48 kHz Frame sizes from 2.5 ms to 60 ms Support for both constant bit-rate (CBR) and variable bit-rate (VBR) Audio bandwidth from narrowband to full-band Support for speech and music Support for mono and stereo Support for up to 255 channels (multistream frames) Dynamically adjustable bitrate, audio bandwidth, and frame size Good loss robustness and packet loss concealment (PLC) Floating point and fixed-point implementation . This package provides the Opus runtime library. Homepage: http://www.opus-codec.org Package: libp11-kit0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1408 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: p11-kit Version: 0.24.1-2 Depends: libc6 (>= 2.34), libffi8 (>= 3.4) Description: library for loading and coordinating access to PKCS#11 modules - runtime The p11-kit library provides a way to load and enumerate Public-Key Cryptography Standard #11 modules, along with a standard configuration setup for installing PKCS#11 modules so that they're discoverable. It also solves problems with coordinating the use of PKCS#11 by different components or libraries living in the same process. . This package contains the shared library required for applications loading and accessing PKCS#11 modules. Homepage: https://p11-glue.github.io/p11-glue/p11-kit.html Package: libpackagekit-glib2-18 Status: install ok installed Priority: optional Section: libs Installed-Size: 448 Maintainer: Matthias Klumpp Architecture: amd64 Multi-Arch: same Source: packagekit Version: 1.2.6-5+deb12u1 Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.54) Description: Library for accessing PackageKit using GLib PackageKit allows performing simple software management tasks over a DBus interface e.g. refreshing the cache, updating, installing and removing software packages or searching for multimedia codecs and file handlers. . This package provides an advanced library to access PackageKit using GLib. It makes use of only async D-Bus calls and provides high level tasks which peform the "transaction dance". Homepage: https://www.freedesktop.org/software/PackageKit/ Package: libpam-modules Status: install ok installed Priority: required Section: admin Installed-Size: 1031 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: pam Version: 1.5.2-6+deb12u2 Replaces: libpam-umask, libpam0g-util Provides: libpam-mkhomedir, libpam-motd, libpam-umask Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.3.0), libdb5.3, libpam0g (>= 1.4.1), libselinux1 (>= 3.1~), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.5.2-6+deb12u2) Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask Conffiles: /etc/security/access.conf dc21d0fd769d655b311d785670e5c6ae /etc/security/faillock.conf 164da8ffb87f3074179bc60b71d0b99f /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36 /etc/security/limits.conf 0b1967ff9042a716ce6b01cb999aa1f5 /etc/security/namespace.conf 6b3796403421d66db7defc46517711bc /etc/security/namespace.init d9e6a7c85e966427ef23a04ec6c7000f /etc/security/pam_env.conf 89cc8702173d5cd51abc152ae9f8d6bc /etc/security/sepermit.conf 3d82df292d497bbeaaf8ebef18cd14f1 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192 Description: Pluggable Authentication Modules for PAM This package completes the set of modules for PAM. It includes the pam_unix.so module as well as some specialty modules. Homepage: http://www.linux-pam.org/ Package: libpam-modules-bin Status: install ok installed Priority: required Section: admin Installed-Size: 227 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: foreign Source: pam Version: 1.5.2-6+deb12u2 Replaces: libpam-modules (<< 1.5.2-5~) Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.3.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~) Description: Pluggable Authentication Modules for PAM - helper binaries This package contains helper binaries used by the standard set of PAM modules in the libpam-modules package. Homepage: http://www.linux-pam.org/ Package: libpam-runtime Status: install ok installed Priority: required Section: admin Installed-Size: 876 Maintainer: Sam Hartman Architecture: all Multi-Arch: foreign Source: pam Version: 1.5.2-6+deb12u2 Replaces: libpam0g-dev, libpam0g-util Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6) Conflicts: libpam0g-util Conffiles: /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701 Description: Runtime support for the PAM library Contains configuration files and directories required for authentication to work on Debian systems. This package is required on almost all installations. Homepage: http://www.linux-pam.org/ Package: libpam-systemd Status: install ok installed Priority: standard Section: admin Installed-Size: 532 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: same Source: systemd Version: 252.39-1~deb12u2 Provides: default-logind (= 252.39-1~deb12u2), logind (= 252.39-1~deb12u2) Depends: libc6 (>= 2.34), libcap2 (>= 1:2.10), libpam0g (>= 0.99.7.1), systemd (= 252.39-1~deb12u2), libpam-runtime, default-dbus-system-bus | dbus-system-bus, systemd-sysv Recommends: dbus-user-session Description: system and service manager - PAM module This package contains the PAM module which registers user sessions in the systemd control group hierarchy for logind. . If in doubt, do install this package. . Packages that depend on logind functionality need to depend on libpam-systemd. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: libpam0g Status: install ok installed Priority: optional Section: libs Installed-Size: 215 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: pam Version: 1.5.2-6+deb12u2 Replaces: libpam0g-util Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), debconf (>= 0.5) | debconf-2.0 Suggests: libpam-doc Description: Pluggable Authentication Modules library Contains the shared library for Linux-PAM, a library that enables the local system administrator to choose how applications authenticate users. In other words, without rewriting or recompiling a PAM-aware application, it is possible to switch between the authentication mechanism(s) it uses. One may entirely upgrade the local authentication system without touching the applications themselves. Homepage: http://www.linux-pam.org/ Package: libpango-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 520 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: pango1.0 Version: 1.50.12+ds-1 Depends: fontconfig (>= 2.13.0), libc6 (>= 2.14), libfribidi0 (>= 1.0.6), libglib2.0-0 (>= 2.67.3), libharfbuzz0b (>= 5.1.0), libthai0 (>= 0.1.25) Breaks: libpangocairo-1.0-0 (<< 1.44.7), libpangoft2-1.0-0 (<< 1.44.7), libpangoxft-1.0-0 (<< 1.44.7) Description: Layout and rendering of internationalized text Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the shared libraries. Homepage: https://www.pango.org/ Package: libpangocairo-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 103 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: pango1.0 Version: 1.50.12+ds-1 Depends: libc6 (>= 2.4), libcairo2 (>= 1.12.10), libfontconfig1 (>= 2.13.0), libglib2.0-0 (>= 2.62.0), libharfbuzz0b (>= 2.6.0), libpango-1.0-0 (= 1.50.12+ds-1), libpangoft2-1.0-0 (= 1.50.12+ds-1) Description: Layout and rendering of internationalized text Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the shared libraries. Homepage: https://www.pango.org/ Package: libpangoft2-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 142 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: pango1.0 Version: 1.50.12+ds-1 Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.2.1), libglib2.0-0 (>= 2.67.3), libharfbuzz0b (>= 5.1.0), libpango-1.0-0 (= 1.50.12+ds-1) Description: Layout and rendering of internationalized text Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the shared libraries. Homepage: https://www.pango.org/ Package: libparams-classify-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 64 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Source: libparams-classify-perl (0.015-2) Version: 0.015-2+b1 Depends: libdevel-callchecker-perl, perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.4) Suggests: libscalar-number-perl Description: Perl module for argument type classification Params::Classify provides various type-testing functions. These are intended for functions that, unlike most Perl code, care what type of data they are operating on. For example, some functions wish to behave differently depending on the type of their arguments (like overloaded functions in C++). . These functions only provide type classification; they do not enforce type restrictions. Type enforcement may, of course, be built using these classification functions, but the reader's attention is drawn to libparams-validate-perl. Homepage: https://metacpan.org/release/Params-Classify Package: libparams-util-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 75 Maintainer: Debian Perl Group Architecture: amd64 Source: libparams-util-perl (1.102-2) Version: 1.102-2+b1 Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.4) Description: Perl extension for simple stand-alone param checking functions Params::Util provides a basic set of importable functions that makes checking parameters easier. The functions provided by Params::Util check in the most strictly correct manner, and it should not be fooled by odd cases. Homepage: https://metacpan.org/release/Params-Util Package: libparams-validate-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 169 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Version: 1.31-1 Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.4), libmodule-implementation-perl, libscalar-list-utils-perl Description: Perl module to validate parameters to Perl method/function calls Params::Validate is a Perl module providing a flexible way to validate method and function call parameters. The validation can be as simple as checking for the presence of required parameters, or more complex, like validating object classes (via isa) or capabilities (via can) and checking parameter types. It also provides extensibility through customized validation callbacks. . The module has been designed to work equally well with positional or named parameters (via a hash or hash reference) and includes experimental support for attributes (see Attribute::Params::Validate for details). Homepage: https://metacpan.org/release/Params-Validate Package: libpcap0.8 Status: install ok installed Priority: optional Section: libs Installed-Size: 368 Maintainer: Romain Francoise Architecture: amd64 Multi-Arch: same Source: libpcap Version: 1.10.3-1 Depends: libc6 (>= 2.33), libdbus-1-3 (>= 1.9.14) Description: system interface for user-level packet capture libpcap (Packet CAPture) provides a portable framework for low-level network monitoring. Applications include network statistics collection, security monitoring, network debugging, etc. . Since almost every system vendor provides a different interface for packet capture, and since there are several tools that require this functionality, the libpcap authors created this system-independent API to ease in porting and to alleviate the need for several system-dependent packet capture modules in each application. Homepage: https://www.tcpdump.org/ Package: libpciaccess0 Status: install ok installed Priority: optional Section: libs Installed-Size: 92 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libpciaccess Version: 0.17-2 Depends: libc6 (>= 2.33), zlib1g (>= 1:1.1.4) Suggests: pciutils Description: Generic PCI access library for X Provides functionality for X to access the PCI bus and devices in a platform-independent way. Package: libpcre2-16-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 632 Maintainer: Matthew Vernon Architecture: amd64 Multi-Arch: same Source: pcre2 Version: 10.42-1 Depends: libc6 (>= 2.34) Description: New Perl Compatible Regular Expression Library - 16 bit runtime files This is PCRE2, the new implementation of PCRE, a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. New projects should use this library in preference to the older library, confusingly called pcre3 in Debian. . This package contains the 16 bit runtime library, which operates on UTF-16 input. Homepage: https://pcre.org/ Package: libpcre2-32-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 608 Maintainer: Matthew Vernon Architecture: amd64 Multi-Arch: same Source: pcre2 Version: 10.42-1 Depends: libc6 (>= 2.34) Description: New Perl Compatible Regular Expression Library - 32 bit runtime files This is PCRE2, the new implementation of PCRE, a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. New projects should use this library in preference to the older library, confusingly called pcre3 in Debian. . This package contains the 32 bit runtime library, which operates on UTF-32 input. Homepage: https://pcre.org/ Package: libpcre2-8-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 685 Maintainer: Matthew Vernon Architecture: amd64 Multi-Arch: same Source: pcre2 Version: 10.42-1 Depends: libc6 (>= 2.34) Description: New Perl Compatible Regular Expression Library- 8 bit runtime files This is PCRE2, the new implementation of PCRE, a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. New projects should use this library in preference to the older library, confusingly called pcre3 in Debian. . This package contains the 8 bit runtime library, which operates on ASCII and UTF-8 input. Homepage: https://pcre.org/ Package: libpcre2-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 2588 Maintainer: Matthew Vernon Architecture: amd64 Multi-Arch: same Source: pcre2 Version: 10.42-1 Depends: libc-dev, libpcre2-8-0 (= 10.42-1), libpcre2-16-0 (= 10.42-1), libpcre2-32-0 (= 10.42-1), libpcre2-posix3 (= 10.42-1) Conflicts: libpcre3-dev (<< 2:8.35-8) Description: New Perl Compatible Regular Expression Library - development files This is PCRE2, the new implementation of PCRE, a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. New projects should use this library in preference to the older library, confusingly called pcre3 in Debian. . This package contains the development files, including headers, static libraries, and documentation. Homepage: https://pcre.org/ Package: libpcre2-posix3 Status: install ok installed Priority: optional Section: libs Installed-Size: 82 Maintainer: Matthew Vernon Architecture: amd64 Multi-Arch: same Source: pcre2 Version: 10.42-1 Replaces: libpcre2-posix0 Depends: libc6 (>= 2.4), libpcre2-8-0 (>= 10.22) Conflicts: libpcre2-posix0 Description: New Perl Compatible Regular Expression Library - posix-compatible runtime files This is PCRE2, the new implementation of PCRE, a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. New projects should use this library in preference to the older library, confusingly called pcre3 in Debian. . This package contains the runtime library for the posix-compatible API. Homepage: https://pcre.org/ Package: libpcre3 Status: install ok installed Priority: important Section: libs Installed-Size: 692 Maintainer: Perl 5 Compatible Regular Expression Library Architecture: amd64 Multi-Arch: same Source: pcre3 Version: 2:8.45-1+0~20250310.11+debian12~1.gbp8792c4 Depends: libc6 (>= 2.34) Description: Perl 5 Compatible Regular Expression Library - runtime files This is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . This package contains the runtime libraries. Package: libperl5.36 Status: install ok installed Priority: optional Section: libs Installed-Size: 28864 Maintainer: Niko Tyni Architecture: amd64 Multi-Arch: same Source: perl Version: 5.36.0-7+deb12u3 Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.103), libcompress-raw-zlib-perl (<< 2.105), libcompress-zlib-perl (<< 2.106), libdigest-md5-perl (<< 2.58), libdigest-sha-perl (<< 6.02), libencode-perl (<< 3.17), libio-compress-base-perl (<< 2.106), libio-compress-bzip2-perl (<< 2.106), libio-compress-perl (<< 2.106), libio-compress-zlib-perl (<< 2.106), libmime-base64-perl (<< 3.16), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 3.26), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.27), libthreads-shared-perl (<< 1.64), libtime-hires-perl (<< 1.9770), libtime-piece-perl (<< 1.3401), perl (<< 5.22.0~), perl-base (<< 5.22.0~) Depends: libbz2-1.0, libc6 (>= 2.35), libcrypt1 (>= 1:4.1.0), libdb5.3, libgdbm-compat4 (>= 1.18-3), libgdbm6 (>= 1.21), zlib1g (>= 1:1.2.2.3), perl-modules-5.36 (>= 5.36.0-7+deb12u3) Suggests: sensible-utils Breaks: libcompress-raw-bzip2-perl (<< 2.103), libcompress-raw-zlib-perl (<< 2.105), libcompress-zlib-perl (<< 2.106), libdigest-md5-perl (<< 2.58), libdigest-sha-perl (<< 6.02), libencode-perl (<< 3.17), libfilter-perl (<< 1.60), libio-compress-base-perl (<< 2.106), libio-compress-bzip2-perl (<< 2.106), libio-compress-perl (<< 2.106), libio-compress-zlib-perl (<< 2.106), libmime-base64-perl (<< 3.16), libstorable-perl (<< 3.26), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.27), libthreads-shared-perl (<< 1.64), libtime-hires-perl (<< 1.9770), libtime-piece-perl (<< 1.3401) Description: shared Perl library This package contains the shared Perl library, used by applications which embed a Perl interpreter. . It also contains the architecture-dependent parts of the standard library (and depends on perl-modules-5.36 which contains the architecture-independent parts). Homepage: http://dev.perl.org/perl5/ Package: libpgm-5.3-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 322 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: libpgm Version: 5.3.128~dfsg-2 Depends: libc6 (>= 2.29) Description: OpenPGM shared library OpenPGM is an open source implementation of the Pragmatic General Multicast (PGM) specification in RFC 3208 available at www.ietf.org. PGM is a reliable and scalable multicast protocol that enables receivers to detect loss, request retransmission of lost data, or notify an application of unrecoverable loss. PGM is a receiver-reliable protocol, which means the receiver is responsible for ensuring all data is received, absolving the sender of reception responsibility. PGM runs over a best effort datagram service, currently OpenPGM uses IP multicast but could be implemented above switched fabrics such as InfiniBand. . This is the runtime package for programs that use the OpenPGM library. Homepage: https://github.com/steve-o/openpgm Package: libpipeline1 Status: install ok installed Priority: optional Section: libs Installed-Size: 96 Maintainer: Colin Watson Architecture: amd64 Multi-Arch: same Source: libpipeline Version: 1.5.7-1 Depends: libc6 (>= 2.34) Description: Unix process pipeline manipulation library This is a C library for setting up and running pipelines of processes, without needing to involve shell command-line parsing which is often error-prone and insecure. Homepage: https://libpipeline.gitlab.io/libpipeline/ Package: libpixman-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1002 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: pixman Version: 0.42.2-1 Depends: libc6 (>= 2.29) Description: pixel-manipulation library for X and cairo A library for manipulating pixel regions -- a set of Y-X banded rectangles, image compositing using the Porter/Duff model and implicit mask generation for geometric primitives including trapezoids, triangles, and rectangles. Homepage: http://pixman.org/ Package: libplacebo208 Status: install ok installed Priority: optional Section: libs Installed-Size: 7716 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libplacebo Version: 4.208.0-3 Depends: libc6 (>= 2.34), libepoxy0 (>= 1.4.3), libgcc-s1 (>= 3.4), liblcms2-2 (>= 2.6), libstdc++6 (>= 11), libvulkan1 (>= 1.2.131.2) Description: GPU-accelerated video/image rendering primitives (shared library) The library provides useful GPU-accelerated image processing primitives based on GLSL. It includes shader routines for decoding and transforming colors, tone mapping, dithering, and for various algorithms that sample from images, such as debanding and scaling. . This package contains the shared library. Homepage: https://code.videolan.org/videolan/libplacebo Package: libpng16-16 Status: install ok installed Priority: optional Section: libs Installed-Size: 417 Maintainer: Maintainers of libpng1.6 packages Architecture: amd64 Multi-Arch: same Source: libpng1.6 Version: 1.6.39-2+deb12u5 Depends: libc6 (>= 2.29), zlib1g (>= 1:1.2.11.dfsg) Description: PNG library - runtime (version 1.6) libpng is a library implementing an interface for reading and writing PNG (Portable Network Graphics) format files. . This package contains the runtime library files needed to run software using libpng. Homepage: http://libpng.org/pub/png/libpng.html Package: libpocketsphinx3 Status: install ok installed Priority: optional Section: libs Installed-Size: 314 Maintainer: Debian Accessibility Team Architecture: amd64 Multi-Arch: same Source: pocketsphinx Version: 0.8+5prealpha+1-15 Depends: libc6 (>= 2.29), libsphinxbase3 (>= 0.8+5prealpha+1) Recommends: pocketsphinx-en-us Description: Speech recognition tool - front-end library CMU Sphinx is a large vocabulary, speaker-independent continuous speech recognition engine. . This package contains the frontend shared library Homepage: http://cmusphinx.sourceforge.net/ Package: libpolkit-agent-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 70 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: policykit-1 Version: 122-3 Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.37.3), libpolkit-gobject-1-0 (= 122-3) Description: polkit Authentication Agent API polkit is a toolkit for defining and handling the policy that allows unprivileged processes to speak to privileged processes. It was previously named PolicyKit. . This package contains a library for accessing the authentication agent. Homepage: https://www.freedesktop.org/wiki/Software/polkit/ Package: libpolkit-gobject-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 148 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: policykit-1 Version: 122-3 Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.37.3), libsystemd0 (>= 213) Description: polkit Authorization API polkit is a toolkit for defining and handling the policy that allows unprivileged processes to speak to privileged processes. It was previously named PolicyKit. . This package contains a library for accessing polkit. Homepage: https://www.freedesktop.org/wiki/Software/polkit/ Package: libpopt0 Status: install ok installed Priority: optional Section: libs Installed-Size: 245 Maintainer: Håvard F. Aasen Architecture: amd64 Multi-Arch: same Source: popt Version: 1.19+dfsg-1 Depends: libc6 (>= 2.33) Description: lib for parsing cmdline parameters Popt was heavily influenced by the getopt() and getopt_long() functions, but it allows more powerful argument expansion. It can parse arbitrary argv[] style arrays and automatically set variables based on command line arguments. It also allows command line arguments to be aliased via configuration files and includes utility functions for parsing arbitrary strings into argv[] arrays using shell-like rules. . This package contains the runtime library and locale data. Homepage: https://github.com/rpm-software-management/popt Package: libpostproc56 Status: install ok installed Priority: optional Section: libs Installed-Size: 239 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: ffmpeg Version: 7:5.1.9-0+deb12u1 Depends: libavutil57 (>= 7:5.0), libc6 (>= 2.14) Description: FFmpeg library for post processing - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library provides video post processing. . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libpq5 Status: install ok installed Priority: optional Section: libs Installed-Size: 866 Maintainer: Debian PostgreSQL Maintainers Architecture: amd64 Multi-Arch: same Source: postgresql-15 Version: 15.18-0+deb12u1 Depends: libc6 (>= 2.33), libgssapi-krb5-2 (>= 1.17), libldap-2.5-0 (>= 2.5.4), libssl3 (>= 3.0.0) Description: PostgreSQL C client library libpq is a C library that enables user programs to communicate with the PostgreSQL database server. The server can be on another machine and accessed through TCP/IP. This version of libpq is compatible with servers from PostgreSQL 8.2 or later. . This package contains the run-time library, needed by packages using libpq. . PostgreSQL is an object-relational SQL database management system. Homepage: http://www.postgresql.org/ Package: libproc2-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 232 Maintainer: Craig Small Architecture: amd64 Multi-Arch: same Source: procps Version: 2:4.0.2-3 Replaces: procps (<< 1:3.3.2-1) Depends: libc6 (>= 2.34), libsystemd0 (>= 209) Description: library for accessing process information from /proc The libproc2 library is a way of accessing information out of the /proc filesystem. . This package contains the shared libraries necessary to run programs compiled with libproc2. Homepage: https://gitlab.com/procps-ng/procps Package: libprotobuf-c1 Status: install ok installed Priority: optional Section: libs Installed-Size: 69 Maintainer: Robert Edmonds Architecture: amd64 Multi-Arch: same Source: protobuf-c (1.4.1-1) Version: 1.4.1-1+b1 Depends: libc6 (>= 2.14) Description: Protocol Buffers C shared library (protobuf-c) Protocol Buffers are a flexible, efficient, automated mechanism for serializing structured data - similar to XML, but smaller, faster, and simpler. You define how you want your data to be structured once, then you can use special generated source code to easily write and read your structured data to and from a variety of data streams and using a variety of languages. You can even update your data structure without breaking deployed programs that are compiled against the "old" format. . This is the "protobuf-c" implementation of Protocol Buffers in C. . This package contains the shared library. Homepage: https://github.com/protobuf-c/protobuf-c Package: libprotobuf32 Status: install ok installed Priority: optional Section: libs Installed-Size: 3337 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: protobuf Version: 3.21.12-3 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11), zlib1g (>= 1:1.1.4) Breaks: cura-engine (<< 1:3.3.0-2.1+b1), libarcus3 (<< 3.3.0-2) Description: protocol buffers C++ library Protocol buffers are a flexible, efficient, automated mechanism for serializing structured data - similar to XML, but smaller, faster, and simpler. You define how you want your data to be structured once, then you can use special generated source code to easily write and read your structured data to and from a variety of data streams and using a variety of languages. You can even update your data structure without breaking deployed programs that are compiled against the "old" format. . Google uses Protocol Buffers for almost all of its internal RPC protocols and file formats. . This package contains the runtime library needed for C++ applications. Homepage: https://github.com/google/protobuf/ Package: libpsl5 Status: install ok installed Priority: optional Section: libs Installed-Size: 96 Maintainer: Tim Rühsen Architecture: amd64 Multi-Arch: same Source: libpsl Version: 0.21.2-1 Depends: libidn2-0 (>= 0.16), libc6 (>= 2.33), libunistring2 (>= 0.9.7) Recommends: publicsuffix (>= 20150507) Description: Library for Public Suffix List (shared libraries) Libpsl allows checking domains against the Public Suffix List. It can be used to avoid privacy-leaking 'super-cookies', 'super domain' certificates, for domain highlighting purposes sorting domain lists by site and more. . Please see https://publicsuffix.org for more detailed information. . This package contains runtime libraries. Homepage: https://github.com/rockdaboot/libpsl Package: libpulse0 Status: install ok installed Priority: optional Section: libs Installed-Size: 969 Maintainer: Pulseaudio maintenance team Architecture: amd64 Multi-Arch: same Source: pulseaudio (16.1+dfsg1-2) Version: 16.1+dfsg1-2+b1 Depends: libasyncns0 (>= 0.3), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libsndfile1 (>= 1.0.20), libsystemd0, libx11-6, libx11-xcb1 (>= 2:1.8.1), libxcb1 Suggests: pulseaudio Conffiles: /etc/pulse/client.conf 16bb1fd7704eae3f0e7dde080b83e197 Description: PulseAudio client libraries PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . Client libraries used by applications that access a PulseAudio sound server via PulseAudio's native interface. Homepage: https://www.pulseaudio.org Package: libpython3-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 37 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: python3-defaults (3.11.2-1) Version: 3.11.2-1+b1 Replaces: libpython3.8-dev (<< 3.8.0-2), python3-dev (<< 3.8.0-1) Depends: libpython3.11-dev (>= 3.11.2-1~) Breaks: libpython3.8-dev (<< 3.8.0-2), python3-dev (<< 3.8.0-1) Description: header files and a static library for Python (default) Header files, a static library and development tools for building Python modules, extending the Python interpreter or embedding Python in applications. . This package is a dependency package, which depends on Debian's default Python 3 version's headers (currently v3.11). Homepage: https://www.python.org/ Package: libpython3-stdlib Status: install ok installed Priority: optional Section: python Installed-Size: 27 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: python3-defaults (3.11.2-1) Version: 3.11.2-1+b1 Depends: libpython3.11-stdlib (>= 3.11.2-1~) Description: interactive high-level object-oriented language (default python3 version) This package contains the majority of the standard library for the Python language (default python3 version). . This package is a dependency package, which depends on Debian's default Python 3 version's standard library (currently v3.11). Homepage: https://www.python.org/ Package: libpython3.11 Status: install ok installed Priority: optional Section: libs Installed-Size: 7621 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: python3.11 Version: 3.11.2-6+deb12u7 Depends: libpython3.11-stdlib (= 3.11.2-6+deb12u7), libc6 (>= 2.35), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0) Description: Shared Python runtime library (version 3.11) Python is a high-level, interactive, object-oriented language. Its 3.11 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains the shared runtime library, normally not needed for programs using the statically linked interpreter. Package: libpython3.11-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 25785 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: python3.11 Version: 3.11.2-6+deb12u7 Depends: libpython3.11-stdlib (= 3.11.2-6+deb12u7), libpython3.11 (= 3.11.2-6+deb12u7), libexpat1-dev, zlib1g-dev Recommends: libc6-dev | libc-dev Description: Header files and a static library for Python (v3.11) Header files, a static library and development tools for building Python (v3.11) modules, extending the Python interpreter or embedding Python (v3.11) in applications. . Maintainers of Python packages should read README.maintainers. . This package contains development files. It is normally not used on it's own, but as a dependency of python3.11-dev. Package: libpython3.11-minimal Status: install ok installed Priority: optional Section: python Installed-Size: 5214 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: python3.11 Version: 3.11.2-6+deb12u7 Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0) Recommends: libpython3.11-stdlib Conflicts: binfmt-support (<< 1.1.2) Conffiles: /etc/python3.11/sitecustomize.py d6b276695157bde06a56ba1b2bc53670 Description: Minimal subset of the Python language (version 3.11) This package contains some essential modules. It is normally not used on it's own, but as a dependency of python3.11-minimal. Package: libpython3.11-stdlib Status: install ok installed Priority: optional Section: python Installed-Size: 8328 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: python3.11 Version: 3.11.2-6+deb12u7 Replaces: python3-gdbm (<< 3.9.9-1~) Depends: libpython3.11-minimal (= 3.11.2-6+deb12u7), media-types | mime-support, libbz2-1.0, libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libdb5.3, libffi8 (>= 3.4), liblzma5 (>= 5.1.1alpha+20120614), libncursesw6 (>= 6.1), libnsl2 (>= 1.0), libreadline8 (>= 7.0~beta), libsqlite3-0 (>= 3.36.0), libtinfo6 (>= 6), libtirpc3 (>= 1.0.2), libuuid1 (>= 2.20.1) Breaks: python3-gdbm (<< 3.9.9-1~) Description: Interactive high-level object-oriented language (standard library, version 3.11) Python is a high-level, interactive, object-oriented language. Its 3.11 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains Python 3.11's standard library. It is normally not used on its own, but as a dependency of python3.11. Package: libqt5core5a Status: install ok installed Priority: optional Section: libs Installed-Size: 5928 Maintainer: Debian Qt/KDE Maintainers Architecture: amd64 Multi-Arch: same Source: qtbase-opensource-src Version: 5.15.8+dfsg-11+deb12u3 Replaces: libqtcore4 (<< 4:4.8.7+dfsg-20~) Provides: qtbase-abi-5-15-8 Depends: shared-mime-info, libc6 (>= 2.35), libdouble-conversion3 (>= 2.0.0), libgcc-s1 (>= 3.4), libglib2.0-0 (>= 2.22.0), libicu72 (>= 72.1~rc-1~), libpcre2-16-0 (>= 10.22), libstdc++6 (>= 11), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Recommends: qttranslations5-l10n Suggests: libthai0 Breaks: libqtcore4 (<< 4:4.8.7+dfsg-20~) Description: Qt 5 core module Qt is a cross-platform C++ application framework. Qt's primary feature is its rich set of widgets that provide standard GUI functionality. . The QtCore module contains core non-GUI functionality. Homepage: https://www.qt.io/developers/ Package: libqt5dbus5 Status: install ok installed Priority: optional Section: libs Installed-Size: 751 Maintainer: Debian Qt/KDE Maintainers Architecture: amd64 Multi-Arch: same Source: qtbase-opensource-src Version: 5.15.8+dfsg-11+deb12u3 Depends: libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libqt5core5a (>= 5.15.1), libstdc++6 (>= 5), qtbase-abi-5-15-8 Description: Qt 5 D-Bus module Qt is a cross-platform C++ application framework. Qt's primary feature is its rich set of widgets that provide standard GUI functionality. . The QtDBus module is a Unix-only library that you can use to make Inter-Process Communication using the D-Bus protocol. . Applications using the QtDBus module can provide services to other, remote applications by exporting objects, as well as use services exported by those applications by placing calls and accessing properties. Homepage: https://www.qt.io/developers/ Package: libqt5network5 Status: install ok installed Priority: optional Section: libs Installed-Size: 2485 Maintainer: Debian Qt/KDE Maintainers Architecture: amd64 Multi-Arch: same Source: qtbase-opensource-src Version: 5.15.8+dfsg-11+deb12u3 Depends: libssl3, libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libqt5core5a (>= 5.15.1), libqt5dbus5 (>= 5.14.1), libstdc++6 (>= 11), qtbase-abi-5-15-8, zlib1g (>= 1:1.1.4) Description: Qt 5 network module Qt is a cross-platform C++ application framework. Qt's primary feature is its rich set of widgets that provide standard GUI functionality. . The QtNetwork module offers classes that allow you to write TCP/IP clients and servers. It provides classes to make network programming easier and portable. Homepage: https://www.qt.io/developers/ Package: libqt5sql5 Status: install ok installed Priority: optional Section: libs Installed-Size: 437 Maintainer: Debian Qt/KDE Maintainers Architecture: amd64 Multi-Arch: same Source: qtbase-opensource-src Version: 5.15.8+dfsg-11+deb12u3 Depends: libc6 (>= 2.14), libqt5core5a (>= 5.15.1), libstdc++6 (>= 5), qtbase-abi-5-15-8 Recommends: libqt5sql5-sqlite | libqt5sql5-mysql | libqt5sql5-odbc | libqt5sql5-psql | libqt5sql5-tds | libqt5sql5-ibase Description: Qt 5 SQL module Qt is a cross-platform C++ application framework. Qt's primary feature is its rich set of widgets that provide standard GUI functionality. . The QtSql module helps you provide seamless database integration to your Qt applications. Homepage: https://www.qt.io/developers/ Package: libqt5sql5-sqlite Status: install ok installed Priority: optional Section: libs Installed-Size: 229 Maintainer: Debian Qt/KDE Maintainers Architecture: amd64 Multi-Arch: same Source: qtbase-opensource-src Version: 5.15.8+dfsg-11+deb12u3 Depends: libc6 (>= 2.14), libqt5core5a (>= 5.15.1), libqt5sql5 (>= 5.10.0), libsqlite3-0 (>= 3.7.3), libstdc++6 (>= 5), qtbase-abi-5-15-8 Description: Qt 5 SQLite 3 database driver This package contains the SQLite 3 plugin for Qt 5. . Install it if you intend to use or write Qt programs that are to access an SQLite 3 DB. Homepage: https://www.qt.io/developers/ Package: libqt5xml5 Status: install ok installed Priority: optional Section: libs Installed-Size: 450 Maintainer: Debian Qt/KDE Maintainers Architecture: amd64 Multi-Arch: same Source: qtbase-opensource-src Version: 5.15.8+dfsg-11+deb12u3 Depends: libc6 (>= 2.14), libqt5core5a (>= 5.15.1), libstdc++6 (>= 11), qtbase-abi-5-15-8 Description: Qt 5 XML module Qt is a cross-platform C++ application framework. Qt's primary feature is its rich set of widgets that provide standard GUI functionality. . The QtXml module provides a stream reader and writer for XML documents, and C++ implementations of SAX and DOM. Homepage: https://www.qt.io/developers/ Package: libqt6webengine6-data Status: install ok config-files Priority: optional Section: libs Installed-Size: 34915 Maintainer: Debian Qt/KDE Maintainers Architecture: all Multi-Arch: foreign Source: qt6-webengine Version: 6.4.2-final+dfsg-1 Config-Version: 6.4.2-final+dfsg-1 Conffiles: /etc/environment.d/90qt6webengine-dictionaries-path.conf cd6dbf13d763df9273a86e8dfc51ab70 Description: Qt 6 Web content engine library - data Qt is a cross-platform C++ application framework. Qt's primary feature is its rich set of widgets that provide standard GUI functionality. . Qt WebEngine provides a Web browser engine that makes it easy to embed content from the World Wide Web into your Qt application. . This package contains the arch independent parts of Qt WebEngine libraries. Homepage: https://www.qt.io/developers/ Package: libquadmath0 Status: install ok installed Priority: optional Section: libs Installed-Size: 292 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.23) Description: GCC Quad-Precision Math Library A library, which provides quad-precision mathematical functions on targets supporting the __float128 datatype. The library is used to provide on such targets the REAL(16) type in the GNU Fortran compiler. Homepage: http://gcc.gnu.org/ Package: librabbitmq4 Status: install ok installed Priority: optional Section: libs Installed-Size: 124 Maintainer: Florian Ernst Architecture: amd64 Multi-Arch: same Source: librabbitmq Version: 0.11.0-1+deb12u2 Depends: libc6 (>= 2.17), libssl3 (>= 3.0.0) Description: AMQP client library written in C RabbitMQ provides robust messaging for applications. It is easy to use, fit for purpose at cloud scale and supported on all major operating systems and developer platforms. librabbitmq is a C-language AMQP client library for use with AMQP servers such as RabbitMQ speaking protocol versions 0-9-1. . This package includes the library itself. Homepage: https://github.com/alanxz/rabbitmq-c Package: libraqm0 Status: install ok installed Priority: optional Section: libs Installed-Size: 37 Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) Architecture: amd64 Multi-Arch: same Source: raqm Version: 0.7.0-4.1 Depends: libc6 (>= 2.14), libfreetype6 (>= 2.4.2), libfribidi0 (>= 1.0.0), libharfbuzz0b (>= 5.2) Description: Library for complex text layout Raqm is a small library to provide convenience functions for complex text layout. It currently provides bidirectional text support (using FriBiDi), shaping (using HarfBuzz), with proper script itemization. . This package contains the shared libraries. Homepage: https://github.com/HOST-Oman/libraqm Package: librav1e0 Status: install ok installed Priority: optional Section: libs Installed-Size: 2664 Maintainer: Debian Rust Maintainers Architecture: amd64 Multi-Arch: same Source: rust-rav1e Version: 0.5.1-6 Depends: libc6 (>= 2.34), libgcc-s1 (>= 4.2) Description: Fastest and safest AV1 encoder - shared library rav1e is a encoder for the AV1 video codec. . This package contains the shared library. Homepage: https://github.com/xiph/rav1e Package: libraw1394-11 Status: install ok installed Priority: optional Section: libs Installed-Size: 100 Maintainer: Guus Sliepen Architecture: amd64 Multi-Arch: same Source: libraw1394 Version: 2.1.2-2 Depends: libc6 (>= 2.14) Suggests: libraw1394-doc Description: library for direct access to IEEE 1394 bus (aka FireWire) libraw1394 is the only supported interface to the kernel side raw1394 of the Linux IEEE-1394 subsystem, which provides direct access to the connected 1394 buses to user space. Through libraw1394/raw1394, applications can directly send to and receive from other nodes without requiring a kernel driver for the protocol in question. Homepage: https://ieee1394.wiki.kernel.org/ Package: librbl1 Status: install ok installed Priority: optional Section: libs Installed-Size: 71 Maintainer: David Bürgin Architecture: amd64 Multi-Arch: same Source: opendkim Version: 2.11.0~beta2-8+deb12u1 Depends: libc6 (>= 2.34) Description: Real-time Blacklist (RBL) query library The OpenDKIM Project is a community effort to develop and maintain a C library for producing DKIM-aware applications and an open source milter for providing DomainKeys Identified Mail (DKIM) service. . This package provides library for implementing OpenDKIM's RBL system. Homepage: http://www.opendkim.org/ Package: libreadline8 Status: install ok installed Priority: optional Section: libs Installed-Size: 475 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: readline Version: 8.2-1.3 Depends: readline-common, libc6 (>= 2.33), libtinfo6 (>= 6) Description: GNU readline and history libraries, run-time libraries The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. Package: libregexp-ipv6-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 19 Maintainer: Debian Perl Group Architecture: all Version: 0.03-3 Depends: perl Description: Regular expression for IPv6 addresses Regexp::IPv6 exports the $IPv6_re regular expression that matches any valid IPv6 address as described in "RFC 2373 - 2.2 Text Representation of Addresses" but ::. Any string not compliant with such RFC will be rejected. Homepage: https://metacpan.org/release/Regexp-IPv6/ Package: librist4 Status: install ok installed Priority: optional Section: libs Installed-Size: 190 Maintainer: Florian Ernst Architecture: amd64 Multi-Arch: same Source: librist Version: 0.2.7+dfsg-1 Depends: libc6 (>= 2.28), libcjson1 (>= 1.7.5), libmbedcrypto7 (>= 2.28.0) Description: Reliable Internet Stream Transport -- shared library Reliable Internet Stream Transport (RIST) is a transport protocol designed for reliable transmission of video over lossy networks (including the Internet) with low latency and high quality. . RIST is intended as a more reliable successor to Secure Reliable Transport (SRT), and as an open alternative to proprietary commercial options such as Zixi, VideoFlow, QVidium, and DVEO (Dozer). . This package contains the shared library. Homepage: https://code.videolan.org/rist/librist Package: librsvg2-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 10909 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: librsvg Version: 2.54.7+dfsg-1~deb12u1 Depends: libc6 (>= 2.34), libcairo-gobject2 (>= 1.12.16), libcairo2 (>= 1.15.12), libgcc-s1 (>= 4.2), libgdk-pixbuf-2.0-0 (>= 2.31.1), libglib2.0-0 (>= 2.50.0), libpango-1.0-0 (>= 1.48.11), libpangocairo-1.0-0 (>= 1.48.11), libxml2 (>= 2.9.0) Recommends: librsvg2-common Suggests: librsvg2-bin Description: SAX-based renderer library for SVG files (runtime) The rsvg library is an efficient renderer for Scalable Vector Graphics (SVG) pictures. . This package contains the runtime library, necessary to run applications using librsvg. Homepage: https://wiki.gnome.org/Projects/LibRsvg Package: librtmp1 Status: install ok installed Priority: optional Section: libs Installed-Size: 146 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: rtmpdump (2.4+20151223.gitfa8646d.1-2) Version: 2.4+20151223.gitfa8646d.1-2+b2 Depends: libc6 (>= 2.14), libgmp10, libgnutls30 (>= 3.6.14), libhogweed6, libnettle8, zlib1g (>= 1:1.1.4) Description: toolkit for RTMP streams (shared library) A small dumper for media content streamed over the RTMP protocol (like BBC's iPlayer high quality streams). Supplying an RTMP URL will result in a dumped flv file, which can be played/transcoded with standard tools. . This package contains the shared libraries, header files needed by programs that want to use librtmp. Homepage: http://rtmpdump.mplayerhq.hu/ Package: librubberband2 Status: install ok installed Priority: optional Section: libs Installed-Size: 391 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: rubberband Version: 3.1.2+dfsg0-1 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11) Description: audio time-stretching and pitch-shifting library Rubber Band is a library and utility program that permits you to change the tempo and pitch of an audio recording independently of one another. Homepage: https://www.breakfastquay.com/rubberband/ Package: libsamplerate0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1493 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libsamplerate Version: 0.2.2-3 Depends: libc6 (>= 2.14) Description: Audio sample rate conversion library libsamplerate (aka Secret Rabbit Code) is a library for audio rate conversion. . libsamplerate currently provides three different sample rate conversion algorithms; zero order hold, linear interpolation and FIR filter interpolation (using filters derived from the mathematical SINC function). The first two algorithms (zero order hold and linear) are included for completeness and are not recommended for any application where high quality sample rate conversion is required. For the FIR/Sinc algorithm, three converters are provided; SRC_SINC_FASTEST, SRC_SINC_MEDIUM_QUALITY and SRC_SINC_BEST_QUALITY to allow a trade off between conversion speed and conversion quality. . libsamplerate is capable of downsampling to 1/256 of the original sample rate and upsampling to 256 times the original sample rate. It is also capable of time varying conversions for vary speed effects and synchronising of two unlocked sample rates. Homepage: http://www.mega-nerd.com/SRC/ Package: libsasl2-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 167 Maintainer: Debian Cyrus Team Architecture: amd64 Multi-Arch: same Source: cyrus-sasl2 Version: 2.1.28+dfsg-10 Replaces: libsasl2 Depends: libsasl2-modules-db (>= 2.1.28+dfsg-10), libc6 (>= 2.34) Recommends: libsasl2-modules (>= 2.1.28+dfsg-10) Description: Cyrus SASL - authentication abstraction library This is the Cyrus SASL API implementation, version 2.1. . SASL is the Simple Authentication and Security Layer, a method for adding authentication support to connection-based protocols. To use SASL, a protocol includes a command for identifying and authenticating a user to a server and for optionally negotiating protection of subsequent protocol interactions. If its use is negotiated, a security layer is inserted between the protocol and the connection. See RFC 2222 for more information. . Any of: ANONYMOUS, SCRAM, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used. Homepage: https://www.cyrusimap.org/sasl/ Package: libsasl2-modules Status: install ok installed Priority: optional Section: libs Installed-Size: 284 Maintainer: Debian Cyrus Team Architecture: amd64 Multi-Arch: same Source: cyrus-sasl2 Version: 2.1.28+dfsg-10 Replaces: libsasl2-modules-gssapi-mit (<< 2.1.28+dfsg-4) Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0) Suggests: libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal, libsasl2-modules-ldap, libsasl2-modules-otp, libsasl2-modules-sql Breaks: libsasl2-modules-gssapi-mit (<< 2.1.28+dfsg-4) Description: Cyrus SASL - pluggable authentication modules This is the Cyrus SASL API implementation, version 2.1. See package libsasl2-2 and RFC 2222 for more information. . This package provides the following SASL modules: LOGIN, PLAIN, ANONYMOUS, NTLM, SCRAM, CRAM-MD5, and DIGEST-MD5 (with DES support, deprecated). Homepage: https://www.cyrusimap.org/sasl/ Package: libsasl2-modules-db Status: install ok installed Priority: optional Section: libs Installed-Size: 77 Maintainer: Debian Cyrus Team Architecture: amd64 Multi-Arch: same Source: cyrus-sasl2 Version: 2.1.28+dfsg-10 Depends: libc6 (>= 2.14), libdb5.3 Description: Cyrus SASL - pluggable authentication modules (DB) This is the Cyrus SASL API implementation, version 2.1. See package libsasl2-2 and RFC 2222 for more information. . This package provides the DB plugin, which supports Berkeley DB lookups. Homepage: https://www.cyrusimap.org/sasl/ Package: libsass1 Status: install ok installed Priority: optional Section: libs Installed-Size: 3062 Maintainer: Debian Sass team Architecture: amd64 Multi-Arch: same Source: libsass Version: 3.6.5+20220909-1 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11) Description: C/C++ port of the Sass CSS precompiler Sass is a pre-processing language for CSS. It allows you to write cleaner stylesheets and makes collaboration on your CSS a breeze. . LibSass is a C/C++ port of the Sass engine. The point is to be simple, fast, and easy to integrate. Homepage: https://sass-lang.com/libsass Package: libsbjson2.3 Status: install ok installed Priority: optional Section: libs Installed-Size: 70 Maintainer: Debian SOGo Maintainers Architecture: amd64 Source: sbjson (2.3.2-4) Version: 2.3.2-4+b4 Provides: libsbjson Depends: gnustep-base-runtime (>= 1.28.0), libc6 (>= 2.4), libgnustep-base1.28 (>= 1.28.0), libobjc4 (>= 4.2.1) Description: Objective-C JSON library A strict JSON parser and generator for Objective-C. It adds categories to existing Objective-C objects for a super-simple interface. More flexible APIs are also provided for added control. . This package contains the shared library. Homepage: https://stig.github.com/json-framework Package: libsdl2-2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1968 Maintainer: Debian SDL packages maintainers Architecture: amd64 Multi-Arch: same Source: libsdl2 Version: 2.26.5+dfsg-1 Replaces: libsdl-1.3-0 Depends: libasound2 (>= 1.0.27), libc6 (>= 2.34), libdecor-0-0 (>= 0.1.0), libdrm2 (>= 2.4.47), libgbm1 (>= 8.1~0), libpulse0 (>= 0.99.1), libsamplerate0 (>= 0.1.7), libwayland-client0 (>= 1.20.0), libwayland-cursor0 (>= 1.18), libwayland-egl1 (>= 1.18), libx11-6 (>= 2:1.2.99.901), libxcursor1 (>> 1.1.2), libxext6, libxfixes3 (>= 1:5.0), libxi6 (>= 2:1.6.99.1), libxkbcommon0 (>= 0.5.0), libxrandr2 (>= 2:1.2.99.3), libxss1 Suggests: xdg-utils Conflicts: libsdl-1.3-0 Description: Simple DirectMedia Layer SDL is a library that allows programs portable low level access to a video framebuffer, audio output, mouse, and keyboard. . This version of SDL is compiled with X11 and Wayland graphics drivers and OSS, ALSA, sndio and PulseAudio sound drivers. Homepage: https://www.libsdl.org/ Package: libseccomp2 Status: install ok installed Priority: optional Section: libs Installed-Size: 148 Maintainer: Kees Cook Architecture: amd64 Multi-Arch: same Source: libseccomp Version: 2.5.4-1+deb12u1 Depends: libc6 (>= 2.4) Description: high level interface to Linux seccomp filter This library provides a high level interface to constructing, analyzing and installing seccomp filters via a BPF passed to the Linux Kernel's prctl() syscall. Homepage: https://github.com/seccomp/libseccomp Package: libselinux1 Status: install ok installed Priority: optional Section: libs Installed-Size: 199 Maintainer: Debian SELinux maintainers Architecture: amd64 Multi-Arch: same Source: libselinux (3.4-1) Version: 3.4-1+b6 Depends: libc6 (>= 2.34), libpcre2-8-0 (>= 10.22) Description: SELinux runtime shared libraries This package provides the shared libraries for Security-enhanced Linux that provides interfaces (e.g. library functions for the SELinux kernel APIs like getcon(), other support functions like getseuserbyname()) to SELinux-aware applications. Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. . libselinux1 provides an API for SELinux applications to get and set process and file security contexts and to obtain security policy decisions. Required for any applications that use the SELinux API. libselinux may use the shared libsepol to manipulate the binary policy if necessary (e.g. to downgrade the policy format to an older version supported by the kernel) when loading policy. Homepage: https://selinuxproject.org Package: libsemanage-common Status: install ok installed Priority: optional Section: libs Installed-Size: 37 Maintainer: Debian SELinux maintainers Architecture: all Multi-Arch: foreign Source: libsemanage Version: 3.4-1 Conffiles: /etc/selinux/semanage.conf 8e8dfac33a09c1b53ca08bf6d4201b10 Description: Common files for SELinux policy management libraries This package provides the common files used by the shared libraries for SELinux policy management. . Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Homepage: https://selinuxproject.org Package: libsemanage2 Status: install ok installed Priority: optional Section: libs Installed-Size: 297 Maintainer: Debian SELinux maintainers Architecture: amd64 Multi-Arch: same Source: libsemanage (3.4-1) Version: 3.4-1+b5 Depends: libsemanage-common (>= 3.4-1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.34), libselinux1 (>= 3.4), libsepol2 (>= 3.4) Breaks: policycoreutils (<< 3.0) Description: SELinux policy management library This package provides the shared libraries for SELinux policy management. It uses libsepol for binary policy manipulation and libselinux for interacting with the SELinux system. It also exec's helper programs for loading policy and for checking whether the file_contexts configuration is valid (load_policy and setfiles from policycoreutils) presently, although this may change at least for the bootstrapping case . Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Homepage: https://selinuxproject.org Package: libsensors-config Status: install ok installed Priority: optional Section: utils Installed-Size: 33 Maintainer: Aurelien Jarno Architecture: all Multi-Arch: foreign Source: lm-sensors Version: 1:3.6.0-7.1 Replaces: libsensors4 Suggests: lm-sensors Breaks: libsensors4 Conffiles: /etc/sensors.d/.placeholder d41d8cd98f00b204e9800998ecf8427e /etc/sensors3.conf 41bd2b70a6ce64a21c2d1f70b9eed091 Description: lm-sensors configuration files Lm-sensors is a hardware health monitoring package for Linux. It allows you to access information from temperature, voltage, and fan speed sensors. It works with most newer systems. . This library is only functional with a Linux kernel, it is provided on non-Linux systems for portability reasons only. . This package contains the configuration files. Homepage: https://hwmon.wiki.kernel.org/lm_sensors Package: libsensors5 Status: install ok installed Priority: optional Section: libs Installed-Size: 87 Maintainer: Aurelien Jarno Architecture: amd64 Multi-Arch: same Source: lm-sensors Version: 1:3.6.0-7.1 Depends: libsensors-config, libc6 (>= 2.33) Suggests: lm-sensors Description: library to read temperature/voltage/fan sensors Lm-sensors is a hardware health monitoring package for Linux. It allows you to access information from temperature, voltage, and fan speed sensors. It works with most newer systems. . This library is only functional with a Linux kernel, it is provided on non-Linux systems for portability reasons only. . This package contains a shared library for querying lm-sensors. Homepage: https://hwmon.wiki.kernel.org/lm_sensors Package: libsepol2 Status: install ok installed Priority: optional Section: libs Installed-Size: 775 Maintainer: Debian SELinux maintainers Architecture: amd64 Multi-Arch: same Source: libsepol Version: 3.4-2.1 Depends: libc6 (>= 2.33) Description: SELinux library for manipulating binary security policies Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement®, Role-based Access Control, and Multi-level Security. . libsepol provides an API for the manipulation of SELinux binary policies. It is used by checkpolicy (the policy compiler) and similar tools, as well as by programs like load_policy that need to perform specific transformations on binary policies such as customizing policy boolean settings. Homepage: https://selinuxproject.org Package: libserd-0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 130 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: serd Version: 0.30.16-1 Depends: libc6 (>= 2.29) Suggests: serdi Description: lightweight RDF syntax library Serd is a lightweight C library for RDF syntax which supports reading and writing Turtle and NTriples. . Serd is not intended to be a swiss-army knife of RDF syntax, but rather is suited to resource limited applications, or situations where a simple reader/writer with minimal dependencies is ideal (e.g. in LV2 hosts or plugins). . Serd is: * small: Serd is implemented in under 2500 lines1 of standard C code. * portable and dependency-free: Serd uses only the C standard library, and has no external dependencies, making it a lightweight dependency in every sense. * fast and lightweight: Serd (and the included serdi tool) can be used to stream abbreviated Turtle (unlike many other tools which can not stream since they must first build an internal model to abbreviate). In other words, Serd can re-serialise an unbounded amount of Turtle using a fixed amount of memory, preserving the abbreviations in the input. * conformant and well-tested: Serd is written to the Turtle, NTriples and URI specifications, and includes a comprehensive test suite which includes all the normative examples from the Turtle specification, all the "normal" examples from the URI specification, and additional tests added specifically for Serd. The test suite has over 96% code coverage (by line), and runs with zero memory errors or leaks. Homepage: https://drobilla.net/software/serd/ Package: libshine3 Status: install ok installed Priority: optional Section: libs Installed-Size: 61 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: shine Version: 3.1.1-2 Depends: libc6 (>= 2.4) Description: Fixed-point MP3 encoding library - runtime files Shine can be used to encode audio data on architectures with no floating point processing unit (FPU) at a much better rate than encoding libraries implemented using floating-point arithmetic. . This package contains the files needed to run a program compiled using Shine. Homepage: https://github.com/savonet/shine Package: libsigc++-2.0-0v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 68 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: libsigc++-2.0 Version: 2.12.0-1 Replaces: libsigc++-2.0-0c2a Depends: libc6 (>= 2.4), libgcc-s1 (>= 3.0), libstdc++6 (>= 4.6) Conflicts: libsigc++-2.0-0c2a Description: type-safe Signal Framework for C++ - runtime This library implements a full callback system for use in widget libraries, abstract interfaces, and general programming. It provides the ability to connect an abstract callback to a class method, function, or function object, and contains adaptor classes for the connection of dissimilar callbacks. . These are the runtime files for libsigc++, needed only if you wish to run software which depends on it. Homepage: https://libsigcplusplus.github.io/libsigcplusplus/ Package: libslang2 Status: install ok installed Priority: optional Section: libs Installed-Size: 2386 Maintainer: Alastair McKinstry Architecture: amd64 Multi-Arch: same Source: slang2 Version: 2.3.3-3 Depends: libc6 (>= 2.35) Description: S-Lang programming library - runtime version S-Lang is a C programmer's library that includes routines for the rapid development of sophisticated, user friendly, multi-platform applications. . This package contains only the shared library libslang.so.* and copyright information. It is only necessary for programs that use this library (such as jed and slrn). If you plan on doing development with S-Lang, you will need the companion -dev package as well. Built-Using: unicode-data (= 15.0.0-1) Homepage: http://www.jedsoft.org/slang/ Package: libsmartcols1 Status: install ok installed Priority: optional Section: libs Installed-Size: 289 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.38.1-5+deb12u3 Depends: libc6 (>= 2.33) Description: smart column output alignment library This smart column output alignment library is used by fdisk utilities. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: libsnappy1v5 Status: install ok installed Priority: optional Section: libs Installed-Size: 89 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: snappy Version: 1.1.9-3 Depends: libc6 (>= 2.14), libstdc++6 (>= 5.2) Conflicts: libsnappy1 Description: fast compression/decompression library Snappy is a compression/decompression library. It does not aim for maximum compression, or compatibility with any other compression library; instead, it aims for very high speeds and reasonable compression. . For instance, compared to the fastest mode of zlib, Snappy is an order of magnitude faster for most inputs, but the resulting compressed files are anywhere from 20% to 100% bigger. On a single core of a Core i7 processor in 64-bit mode, Snappy compresses at about 250 MB/sec or more and decompresses at about 500 MB/sec or more. Homepage: https://google.github.io/snappy/ Package: libsndfile1 Status: install ok installed Priority: optional Section: libs Installed-Size: 574 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libsndfile Version: 1.2.0-1+deb12u1 Depends: libc6 (>= 2.33), libflac12 (>= 1.3.0), libmp3lame0 (>= 3.100), libmpg123-0 (>= 1.28.0), libogg0 (>= 1.3.0), libopus0 (>= 1.1), libvorbis0a (>= 1.2.3), libvorbisenc2 (>= 1.1.2) Description: Library for reading/writing audio files libsndfile is a library of C routines for reading and writing files containing sampled audio data. . Various versions of WAV (integer, floating point, GSM, and compressed formats); Microsoft PCM, A-law and u-law formats; AIFF, AIFC and RIFX; various AU/SND formats (Sun/NeXT, Dec AU, G721 and G723 ADPCM); RAW header-less PCM files; Amiga IFF/8SVX/16SV PCM files; Ensoniq PARIS (.PAF); Apple's Core Audio Format (CAF) and others. Homepage: http://www.mega-nerd.com/libsndfile/ Package: libsndio7.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 88 Maintainer: Peter Piwowarski Architecture: amd64 Multi-Arch: same Source: sndio (1.9.0-0.3) Version: 1.9.0-0.3+b2 Replaces: libsndio7.1 (<= 1.8.1-1~exp2) Depends: libasound2 (>= 1.0.17), libbsd0 (>= 0.0), libc6 (>= 2.33) Suggests: sndiod Breaks: libsndio7.1 (<= 1.8.1-1~exp2) Description: Small audio and MIDI framework from OpenBSD, runtime libraries Sndio is a small, simple audio and MIDI framework, developed by the OpenBSD project. It provides a lightweight audio and MIDI server and a well-documented userspace API to access the server or audio hardware in a uniform way. Sndio is designed to work well for both desktop and professional music applications, and supports features found in more complex sound systems such as per-application volume control, software mixing, and network transparency. . This package contains the sndio userspace libraries. Homepage: https://www.sndio.org/ Package: libsocket6-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 64 Maintainer: Debian Perl Group Architecture: amd64 Version: 0.29-3 Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.14) Description: Perl extensions for IPv6 The Socket6 module supports getaddrinfo() and getnameinfo() to intend to enable protocol independent programming. If your environment supports IPv6, IPv6 related defines such as AF_INET6 are included. Homepage: https://metacpan.org/release/Socket6 Package: libsodium23 Status: install ok installed Priority: optional Section: libs Installed-Size: 415 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: libsodium Version: 1.0.18-1+deb12u1 Depends: libc6 (>= 2.34) Description: Network communication, cryptography and signaturing library NaCl (pronounced "salt") is a new easy-to-use high-speed software library for network communication, encryption, decryption, signatures, etc. . NaCl's goal is to provide all of the core operations needed to build higher-level cryptographic tools. . Sodium is a portable, cross-compilable, installable, packageable fork of NaCl, with a compatible API. Homepage: https://www.libsodium.org/ Package: libsope1 Status: install ok installed Priority: optional Section: libs Installed-Size: 10334 Maintainer: Debian SOGo Maintainers Architecture: amd64 Source: sope Version: 5.8.0-1+deb12u1 Depends: gnustep-base-runtime (>= 1.28.0), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libgnustep-base1.28 (>= 1.28.0), libldap-2.5-0 (>= 2.5.4), libmariadb3 (>= 3.0.0), libobjc4 (>= 4.6), libpq5, libssl3 (>= 3.0.0), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4) Description: SKYRiX Object Publishing Environment (shared libraries) An extensive set of Objective-C frameworks which form a complete Web application server environment. Besides the Apple WebObjects compatible appserver that has been extended with Zope concepts, it contains a large set of reusable classes: XML processing (SAX, DOM), MIME/IMAP4 processing, LDAP connectivity, RDBMS connectivity, and iCalendar parsing. . This package contains the shared libraries. Homepage: https://sogo.nu/ Package: libsord-0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 58 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: sord Version: 0.16.14+git221008-1 Depends: libc6 (>= 2.14), libserd-0-0 (>= 0.30) Suggests: sordi Description: library for storing RDF data in memory Sord is a lightweight C library for storing Resource Description Framework (RDF) data in memory. . Sord includes man pages for the library (man sord) and a simple command line utility (man sordi). Homepage: https://drobilla.net/software/sord.html Package: libsoxr0 Status: install ok installed Priority: optional Section: libs Installed-Size: 229 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libsoxr Version: 0.1.3-4 Depends: libc6 (>= 2.29), libgomp1 (>= 4.9) Description: High quality 1D sample-rate conversion library The SoX Resampler library `libsoxr' performs one-dimensional sample-rate conversion - it may be used, for example, to resample PCM-encoded audio. . It aims to give fast and high quality results for any constant (rational or irrational) resampling ratio. Phase-response, preserved bandwidth, aliasing, and rejection level parameters are all configurable; alternatively, simple `preset' configurations may be selected. . A simple API is provided that allows interfacing using commonly-used sample formats and buffering schemes. Homepage: http://sourceforge.net/projects/soxr/ Package: libspeex1 Status: install ok installed Priority: optional Section: libs Installed-Size: 125 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: speex Version: 1.2.1-2 Depends: libc6 (>= 2.29) Suggests: speex Description: The Speex codec runtime library Speex is an audio codec especially designed for compressing voice at low bit-rates for applications such as voice over IP (VoIP). In some senses, it is meant to be complementary to the Vorbis codec which places a greater emphasis on high-quality music reproduction. . This package provides the speex runtime library. Homepage: https://www.speex.org/ Package: libsphinxbase3 Status: install ok installed Priority: optional Section: libs Installed-Size: 326 Maintainer: Debian Accessibility Team Architecture: amd64 Multi-Arch: same Source: sphinxbase Version: 0.8+5prealpha+1-16 Depends: libblas3 | libblas.so.3, libc6 (>= 2.34), liblapack3 | liblapack.so.3, libpulse0 (>= 0.99.1) Description: Speech recognition tool - shared library CMU Sphinx is a large vocabulary, speaker-independent continuous speech recognition engine. . This package contains the shared library. Homepage: https://cmusphinx.sourceforge.net/ Package: libsqlite3-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1682 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: sqlite3 Version: 3.40.1-2+deb12u2 Depends: libc6 (>= 2.34) Breaks: crowdsec (<< 1.4), python-migrate (<< 0.11.0-4~), python3-migrate (<< 0.11.0-4~) Description: SQLite 3 shared library SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Homepage: https://www.sqlite.org/ Package: libsratom-0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 60 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: sratom Version: 0.6.14-1 Depends: libc6 (>= 2.14), libserd-0-0 (>= 0.30.2), libsord-0-0 (>= 0.12.0~dfsg0) Description: library for serialising LV2 atoms to/from Turtle Sratom is a new C library for serialising LV2 atoms to/from Turtle. It is intended to be a full serialisation solution for LV2 atoms, allowing implementations to serialise binary atoms to strings and read them back again. This is particularly useful for saving plugin state, or implementing plugin control with network transparency. Sratom uses Serd and Sord to do the work, it is a small library implemented in a single source file, suitable for direct inclusion in projects if avoiding a dependency is desired. Homepage: https://drobilla.net/software/sratom/ Package: libsrt1.5-gnutls Status: install ok installed Priority: optional Section: libs Installed-Size: 911 Maintainer: Florian Ernst Architecture: amd64 Multi-Arch: same Source: srt Version: 1.5.1-1+deb12u1 Replaces: libsrt1-gnutls Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgnutls30 (>= 3.7.0), libnettle8, libstdc++6 (>= 11) Breaks: libsrt1-gnutls Description: Secure Reliable Transport UDP streaming library (GnuTLS flavour) SRT is a latency-aware UDP transport mechanism optimized for video streams. It detects and compensates for jitter and bandwidth fluctuations due to network congestion. It mitigates packet loss and supports AES encryption. . SSL support is provided by GnuTLS. Homepage: https://github.com/Haivision/srt Package: libss2 Status: install ok installed Priority: optional Section: libs Installed-Size: 71 Maintainer: Theodore Y. Ts'o Architecture: amd64 Multi-Arch: same Source: e2fsprogs (1.47.0-2) Version: 1.47.0-2+b2 Replaces: e2fsprogs (<< 1.34-1) Depends: libcom-err2, libc6 (>= 2.34) Description: command-line interface parsing library libss provides a simple command-line interface parser which will accept input from the user, parse the command into an argv argument vector, and then dispatch it to a handler function. . It was originally inspired by the Multics SubSystem library. Homepage: http://e2fsprogs.sourceforge.net Package: libssh-gcrypt-4 Status: install ok installed Priority: optional Section: libs Installed-Size: 637 Maintainer: Laurent Bigonville Architecture: amd64 Multi-Arch: same Source: libssh Version: 0.10.6-0+deb12u2 Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.14), libgssapi-krb5-2 (>= 1.17), zlib1g (>= 1:1.1.4) Description: tiny C SSH library (gcrypt flavor) The ssh library was designed to be used by programmers needing a working SSH implementation by the mean of a library. The complete control of the client is made by the programmer. With libssh, you can remotely execute programs, transfer files, use a secure and transparent tunnel for your remote programs. With its SFTP implementation, you can play with remote files easily. . This package contains shared libraries linked against gcrypt. Homepage: https://www.libssh.org/ Package: libssh2-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 357 Maintainer: Nicolas Mora Architecture: amd64 Multi-Arch: same Source: libssh2 (1.10.0-3) Version: 1.10.0-3+b1 Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0), zlib1g (>= 1:1.1.4) Description: SSH2 client-side library libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP (v1-v5) sessions; port forwarding, X11 forwarding; password, key-based and keyboard-interactive authentication. . This package contains the runtime library. Homepage: https://libssh2.org/ Package: libssh2-1-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 981 Maintainer: Nicolas Mora Architecture: amd64 Multi-Arch: same Source: libssh2 (1.10.0-3) Version: 1.10.0-3+b1 Depends: libssh2-1 (= 1.10.0-3+b1), libssl-dev, zlib1g-dev Description: SSH2 client-side library (development headers) libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP (v1-v5) sessions; port forwarding, X11 forwarding; password, key-based and keyboard-interactive authentication. . This package contains the development files. Homepage: https://libssh2.org/ Package: libssl-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 12190 Maintainer: Debian OpenSSL Team Architecture: amd64 Multi-Arch: same Source: openssl Version: 3.0.20-1~deb12u2 Depends: libssl3 (= 3.0.20-1~deb12u2) Suggests: libssl-doc Description: Secure Sockets Layer toolkit - development files This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It contains development libraries, header files, and manpages for libssl and libcrypto. Homepage: https://www.openssl.org/ Package: libssl3 Status: install ok installed Priority: optional Section: libs Installed-Size: 6030 Maintainer: Debian OpenSSL Team Architecture: amd64 Multi-Arch: same Source: openssl Version: 3.0.20-1~deb12u2 Depends: libc6 (>= 2.34) Description: Secure Sockets Layer toolkit - shared libraries This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It provides the libssl and libcrypto shared libraries. Homepage: https://www.openssl.org/ Package: libstdc++-12-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 19446 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Provides: libstdc++-dev Depends: gcc-12-base (= 12.2.0-14+deb12u1), libgcc-12-dev (= 12.2.0-14+deb12u1), libstdc++6 (>= 12.2.0-14+deb12u1), libc6-dev (>= 2.23-1~) Suggests: libstdc++-12-doc Description: GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Homepage: http://gcc.gnu.org/ Package: libstdc++6 Status: install ok installed Priority: optional Section: libs Installed-Size: 2686 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Replaces: libstdc++6-12-dbg (<< 4.9.0-3) Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.36), libgcc-s1 (>= 4.2) Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2) Conflicts: scim (<< 1.4.2-1) Description: GNU Standard C++ Library v3 This package contains an additional runtime library for C++ programs built with the GNU compiler. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Homepage: http://gcc.gnu.org/ Package: libstemmer0d Status: install ok installed Priority: optional Section: libs Installed-Size: 818 Maintainer: Stefano Rivera Architecture: amd64 Multi-Arch: same Source: snowball Version: 2.2.0-2 Depends: libc6 (>= 2.4) Description: Snowball stemming algorithms for use in Information Retrieval Snowball provides access to efficient algorithms for calculating a "stemmed" form of a word. This is a form with most of the common morphological endings removed; hopefully representing a common linguistic base form. This is most useful in building search engines and information retrieval software; for example, a search with stemming enabled should be able to find a document containing "cycling" given the query "cycles". . Snowball provides algorithms for several (mainly European) languages. It also provides access to the classic Porter stemming algorithm for English: although this has been superseded by an improved algorithm, the original algorithm may be of interest to information retrieval researchers wishing to reproduce results of earlier experiments. Homepage: https://snowballstem.org/ Package: libsub-exporter-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 155 Maintainer: Debian Perl Group Architecture: all Version: 0.989-1 Depends: perl:any, libdata-optlist-perl, libsub-install-perl Description: sophisticated exporter for custom-built routines When you use a perl module, first it is "required" function used, then its import method is called. . Sub::Exporter provides a sophisticated alternative to Exporter.pm. It allows for renaming, currying/sub-generation etc. . Sub::Exporter builds a custom exporter which can then be installed into your module. It builds this method based on configuration passed to its setup_exporter method. Homepage: https://metacpan.org/release/Sub-Exporter Package: libsub-install-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 31 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 0.929-1 Depends: perl:any Description: module for installing subroutines into packages easily Sub::Install module makes it easy to install subroutines into packages without the unsightly mess of no strict or typeglobs lying about where just anyone can see them. Homepage: https://github.com/rjbs/Sub-Install Package: libsvtav1enc1 Status: install ok installed Priority: optional Section: libs Installed-Size: 6632 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: svt-av1 Version: 1.4.1+dfsg-1 Depends: libc6 (>= 2.34) Description: Scalable Video Technology for AV1 (libsvtav1enc shared library) The Scalable Video Technology for AV1 (SVT-AV1 Encoder and Decoder) is an AV1-compliant encoder/decoder library core. The SVT-AV1 encoder development is a work-in-progress targeting performance levels applicable to both VOD and Live encoding / transcoding video applications. The SVT-AV1 decoder implementation is targeting future codec research activities. . This package provides the shared library libsvtav1enc. Homepage: https://gitlab.com/AOMediaCodec/SVT-AV1 Package: libswresample4 Status: install ok installed Priority: optional Section: libs Installed-Size: 236 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: ffmpeg Version: 7:5.1.9-0+deb12u1 Depends: libavutil57 (>= 7:5.1), libc6 (>= 2.29), libsoxr0 (>= 0.1.0) Description: FFmpeg library for audio resampling, rematrixing etc. - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library performs highly optimized audio resampling, rematrixing and sample format conversion operations. Specifically, this library performs the following conversions: * Resampling is the process of changing the audio rate, for example from a high sample rate of 44100Hz to 8000Hz. Audio conversion from high to low sample rate is a lossy process. Several resampling options and algorithms are available. * Rematrixing is the process of changing the channel layout, for example from stereo to mono. When the input channels cannot be mapped to the output streams, the process is lossy, since it involves different gain factors and mixing. Various other audio conversions (e.g. stretching and padding) are enabled through dedicated options. * Format conversion is the process of converting the type of samples, for example from 16-bit signed samples to unsigned 8-bit or float samples. It also handles packing conversion, when passing from packed layout (all samples belonging to distinct channels interleaved in the same buffer), to planar layout (all samples belonging to the same channel stored in a dedicated buffer or "plane"). . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libswscale6 Status: install ok installed Priority: optional Section: libs Installed-Size: 760 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: ffmpeg Version: 7:5.1.9-0+deb12u1 Depends: libavutil57 (= 7:5.1.9-0+deb12u1), libc6 (>= 2.34) Description: FFmpeg library for image scaling and various conversions - runtime files FFmpeg is the leading multimedia framework, able to decode, encode, transcode, mux, demux, stream, filter and play pretty much anything that humans and machines have created. It supports the most obscure ancient formats up to the cutting edge. . This library performs highly optimized image scaling and colorspace and pixel format conversion operations. Specifically, this library performs the following conversions: * Rescaling is the process of changing the video size. Several rescaling options and algorithms are available. This is usually a lossy process. * Pixel format conversion is the process of converting the image format and colorspace of the image, for example from planar YUV420P to RGB24 packed. It also handles packing conversion, that is converts from packed layout (all pixels belonging to distinct planes interleaved in the same buffer), to planar layout (all samples belonging to the same plane stored in a dedicated buffer or "plane"). This is usually a lossy process in case the source and destination colorspaces differ. . This package contains the runtime files. Homepage: https://ffmpeg.org/ Package: libsys-hostname-long-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 34 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 1.5-3 Depends: perl:any Description: module tp determine the long (fully-qualified) hostname Sys::Hostname::Long determines the host full name on multiple operating systems (MacOS, Windows, Unix-like systems; more later.) . The Sys::Hostname class is the best and standard way to get the basic hostname, but that may not be fully qualified. This module tries to determine the host's fully qualified name. Homepage: https://metacpan.org/release/Sys-Hostname-Long Package: libsystemd-shared Status: install ok installed Priority: optional Section: libs Installed-Size: 5350 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: same Source: systemd Version: 252.39-1~deb12u2 Depends: libacl1 (>= 2.2.23), libapparmor1 (>= 2.13), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.24), libc6 (>= 2.36), libcap2 (>= 1:2.10), libcrypt1 (>= 1:4.4.0), libgcrypt20 (>= 1.10.0), libip4tc2 (>= 1.8.3), libkmod2 (>= 15), liblz4-1 (>= 0.0~r130), liblzma5 (>= 5.1.1alpha+20120614), libmount1 (>= 2.30), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.4.1), libselinux1 (>= 3.1~), libssl3 (>= 3.0.0), libzstd1 (>= 1.5.2) Description: systemd shared private library This internal shared library provides common code used by various systemd components. It is supposed to decrease memory and disk footprint. The shared library is not meant for public use and is not API or ABI stable. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: libsystemd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 909 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: same Source: systemd Version: 252.39-1~deb12u2 Depends: libc6 (>= 2.34), libcap2 (>= 1:2.10), libgcrypt20 (>= 1.10.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614), libzstd1 (>= 1.5.2) Description: systemd utility library This library provides APIs to interface with various system components such as the system journal, the system service manager, D-Bus and more. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: libtalloc2 Status: install ok installed Priority: optional Section: libs Installed-Size: 86 Maintainer: Debian Samba Maintainers Architecture: amd64 Multi-Arch: same Source: talloc Version: 2.4.0-f2 Depends: libc6 (>= 2.16) Breaks: python3-talloc (<< 2.1.13-2~) Description: hierarchical pool based memory allocator A hierarchical pool based memory allocator with destructors. It uses reference counting to determine when memory should be freed. Homepage: https://talloc.samba.org/ Package: libtasn1-6 Status: install ok installed Priority: optional Section: libs Installed-Size: 116 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Version: 4.19.0-2+deb12u1 Depends: libc6 (>= 2.14) Description: Manage ASN.1 structures (runtime) Manage ASN1 (Abstract Syntax Notation One) structures. The main features of this library are: * on-line ASN1 structure management that doesn't require any C code file generation. * off-line ASN1 structure management with C code file generation containing an array. * DER (Distinguish Encoding Rules) encoding * no limits for INTEGER and ENUMERATED values . This package contains runtime libraries. Homepage: https://www.gnu.org/software/libtasn1/ Package: libtermkey1 Status: install ok installed Priority: optional Section: libs Installed-Size: 63 Maintainer: James McCoy Architecture: amd64 Multi-Arch: same Source: libtermkey Version: 0.22-1 Depends: libc6 (>= 2.14), libunibilium4 (>= 1.0) Description: library for processing keyboard input This library allows easy processing of keyboard entry from terminal-based programs. It handles all the necessary logic to recognise special keys, UTF-8 combining, and so on, with a simple interface. It provides the following features: . * Follows terminfo for every sequence listed there, only falling back on other methods to deal with unrecognised input. * Recognises special keys (such as arrow and function keys), including "modified" keys like Ctrl-Left. * Recognises XTerm-style mouse position/button reporting. * MIT licenced to allow almost all projects to use it; both Open Source and Commercial. * Small API - just three functions are needed in simple common cases. * Both synchronous (blocking) and asynchronous (non-blocking) APIs are supported. Homepage: http://www.leonerd.org.uk/code/libtermkey/ Package: libtext-charwidth-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 41 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Version: 0.04-11 Depends: libc6 (>= 2.4), perl-base (>= 5.36.0-4), perlapi-5.36.0 Description: get display widths of characters on the terminal Text::CharWidth permits one to get the display widths of characters and strings on the terminal, using wcwidth() and wcswidth() from libc. . It provides mbwidth(), mbswidth(), and mblen(). Homepage: https://metacpan.org/release/Text-CharWidth Package: libtext-iconv-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 49 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Version: 1.7-8 Depends: libc6 (>= 2.4), perl-base (>= 5.36.0-4), perlapi-5.36.0 Description: module to convert between character sets in Perl The iconv() family of functions from XPG4 defines an API for converting between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They are provided by libc6. . This package allows access to them from Perl via the Text::Iconv package. Homepage: https://metacpan.org/release/Text-Iconv Package: libtext-wrapi18n-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 26 Maintainer: Debian Perl Group Architecture: all Version: 0.06-10 Depends: libtext-charwidth-perl Description: internationalized substitute of Text::Wrap The Text::WrapI18N module is a substitution for Text::Wrap, supporting multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth characters such as east Asian characters, combining characters such as diacritical marks and Thai, and languages which don't use whitespaces between words such as Chinese and Japanese. . It provides wrap(). Homepage: https://metacpan.org/release/Text-WrapI18N Package: libthai-data Status: install ok installed Priority: optional Section: libs Installed-Size: 626 Maintainer: Theppitak Karoonboonyanan Architecture: all Multi-Arch: foreign Source: libthai Version: 0.1.29-1 Breaks: libthai0 (<< 0.1.10) Description: Data files for Thai language support library LibThai is a set of Thai language support routines aimed to ease developers' tasks to incorporate Thai language support in their applications. It includes important Thai-specific functions e.g. word breaking, input and output methods as well as basic character and string supports. . This package contains data files needed by the LibThai library. Homepage: https://linux.thai.net/projects/libthai Package: libthai0 Status: install ok installed Priority: optional Section: libs Installed-Size: 99 Maintainer: Theppitak Karoonboonyanan Architecture: amd64 Multi-Arch: same Source: libthai Version: 0.1.29-1 Depends: libthai-data (>= 0.1.10), libc6 (>= 2.14), libdatrie1 (>= 0.2.0) Enhances: libqtcore4, libqtgui4 Description: Thai language support library LibThai is a set of Thai language support routines aimed to ease developers' tasks to incorporate Thai language support in their applications. It includes important Thai-specific functions e.g. word breaking, input and output methods as well as basic character and string supports. . This package contains the shared libraries needed to run programs that use the LibThai library. Homepage: https://linux.thai.net/projects/libthai Package: libtheora0 Status: install ok installed Priority: optional Section: libs Installed-Size: 648 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libtheora Version: 1.1.1+dfsg.1-16.1+deb12u1 Depends: libc6 (>= 2.14), libcairo2 (>= 1.2.4), libogg0 (>= 1.1.0) Description: Theora Video Compression Codec Theora is an open video codec being developed by the Xiph.org Foundation as part of their Ogg project. Theora is originally derived from On2's VP3 codec, and has improved on it significantly with the merging of code from the Thusnelda branch. Homepage: https://www.theora.org/ Package: libtiff6 Status: install ok installed Priority: optional Section: libs Installed-Size: 716 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: tiff Version: 4.5.0-6+deb12u4 Depends: libc6 (>= 2.33), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblerc4 (>= 3.0), liblzma5 (>= 5.1.1alpha+20120614), libwebp7 (>= 1.2.4), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Description: Tag Image File Format (TIFF) library libtiff is a library providing support for the Tag Image File Format (TIFF), a widely used format for storing image data. This package includes the shared library. Homepage: https://libtiff.gitlab.io/libtiff/ Package: libtimedate-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 127 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 2.3300-2 Depends: perl:any Description: collection of modules to manipulate date/time information TimeDate is a collection of Perl modules useful for manipulating date and time information. Date::Parse can parse absolute date specifications in a wide variety of input formats and many languages (via Date::Language). . This package also includes Date::Format, which can format dates into strings, as well as Time::Zone, which contains miscellaneous time zone functions. Homepage: https://metacpan.org/release/TimeDate Package: libtinfo6 Status: install ok installed Priority: optional Section: libs Installed-Size: 541 Maintainer: Craig Small Architecture: amd64 Multi-Arch: same Source: ncurses Version: 6.4-4 Depends: libc6 (>= 2.34) Description: shared low-level terminfo library for terminal handling The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the shared low-level terminfo library. Homepage: https://invisible-island.net/ncurses/ Package: libtirpc-common Status: install ok installed Priority: optional Section: libs Installed-Size: 35 Maintainer: Josue Ortega Architecture: all Multi-Arch: foreign Source: libtirpc Version: 1.3.3+ds-1 Replaces: libtirpc1, libtirpc3 (<< 1.1.4-0.1~) Breaks: libtirpc1, libtirpc3 (<< 1.1.4-0.1~) Conffiles: /etc/netconfig ca8db53e3af4d735335c2607d21c7195 Description: transport-independent RPC library - common files This package contains a port of Sun's transport-independent RPC library to Linux. The library is intended as a replacement for the RPC code in the GNU C library, providing among others support for RPC (and in turn, NFS) over IPv6. . This package contains the netconfig configuration file as well as the associated manpage. Homepage: http://sourceforge.net/projects/libtirpc Package: libtirpc-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 717 Maintainer: Josue Ortega Architecture: amd64 Multi-Arch: same Source: libtirpc Version: 1.3.3+ds-1 Depends: libtirpc3 (= 1.3.3+ds-1) Description: transport-independent RPC library - development files This package contains a port of Sun's transport-independent RPC library to Linux. The library is intended as a replacement for the RPC code in the GNU C library, providing among others support for RPC (and in turn, NFS) over IPv6. . This package contains the files needed for development against libtirpc. Homepage: http://sourceforge.net/projects/libtirpc Package: libtirpc3 Status: install ok installed Priority: optional Section: libs Installed-Size: 226 Maintainer: Josue Ortega Architecture: amd64 Multi-Arch: same Source: libtirpc Version: 1.3.3+ds-1 Depends: libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libtirpc-common (>= 1.3.3+ds-1) Breaks: nfs-common (<< 1:1.2.8-7), nfs-kernel-server (<< 1:1.2.8-7) Description: transport-independent RPC library This package contains a port of Sun's transport-independent RPC library to Linux. The library is intended as a replacement for the RPC code in the GNU C library, providing among others support for RPC (and in turn, NFS) over IPv6. Homepage: http://sourceforge.net/projects/libtirpc Package: libtool Status: install ok installed Priority: optional Section: devel Installed-Size: 1213 Maintainer: Alastair McKinstry Architecture: all Multi-Arch: foreign Version: 2.4.7-7~deb12u1 Depends: gcc | c-compiler, cpp, libc6-dev | libc-dev, file, autotools-dev Recommends: libltdl-dev Suggests: libtool-doc, autoconf, automaken, gfortran | fortran95-compiler, gcj-jdk Description: Generic library support script This is GNU libtool, a generic library support script. Libtool hides the complexity of generating special library types (such as shared libraries) behind a consistent interface. To use libtool, add the new generic library building commands to your Makefile, Makefile.in, or Makefile.am. See the documentation for details. Libtool supports building static libraries on all platforms. . Libtool supports generation of C, C++, Fortran and Java libraries. Homepage: https://www.gnu.org/software/libtool/ Package: libtorrent-rasterbar2.0 Status: install ok installed Priority: optional Section: libs Installed-Size: 5047 Maintainer: Christian Marillat Architecture: amd64 Multi-Arch: same Source: libtorrent-rasterbar (2.0.8-1) Version: 2.0.8-1+b1 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.4), libssl3 (>= 3.0.0), libstdc++6 (>= 12.2.0-12) Description: C++ bittorrent library by Rasterbar Software Bittorrent library by Rasterbar Software (Arvid Norberg). libtorrent-rasterbar is a C++ library that aims to be a good alternative to all the other bittorrent implementations around. . The main goals of libtorrent-rasterbar are: * to be cpu efficient * to be memory efficient * to be very easy to use . This package contains libtorrent-rasterbar run time shared library. Homepage: https://libtorrent.org/ Package: libtree-sitter0 Status: install ok installed Priority: optional Section: libs Installed-Size: 201 Maintainer: Tree-sitter Maintainers Architecture: amd64 Multi-Arch: same Source: tree-sitter Version: 0.20.7-1 Depends: libc6 (>= 2.17) Description: incremental parsing system for programming tools Tree-sitter is a parser generator tool and an incremental parsing library. It can build a concrete syntax tree for a source file and efficiently update the syntax tree as the source file is edited. Homepage: https://tree-sitter.github.io/tree-sitter/ Package: libtry-tiny-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 48 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 0.31-2 Depends: perl:any Suggests: libsub-name-perl Description: module providing minimalistic try/catch Try::Tiny is a Perl module that provides bare bones try/catch statements. It is designed to eliminate common mistakes with eval blocks, and NOTHING else. . The main focus of this module is to provide simple and reliable error handling for those having a hard time installing TryCatch, but who still want to write correct eval blocks without 5 lines of boilerplate each time. Homepage: https://metacpan.org/release/Try-Tiny Package: libts0 Status: install ok config-files Priority: optional Section: libs Installed-Size: 293 Maintainer: Martin Kepplinger Architecture: amd64 Multi-Arch: same Source: tslib (1.22-1) Version: 1.22-1+b1 Config-Version: 1.22-1+b1 Replaces: tsconf Depends: libc6 (>= 2.14) Breaks: tsconf Conffiles: /etc/ts.conf b46cb8dea4fccd73f97666fd938bafcd Description: touch screen library Tslib is an abstraction layer for touchscreen panel events, as well as a filter stack for the manipulation of those events. Examples of implemented filters include debounce, median, iir, dejitter and the calibration transform. Homepage: http://tslib.org Package: libtsan2 Status: install ok installed Priority: optional Section: libs Installed-Size: 7815 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 3.3) Description: ThreadSanitizer -- a Valgrind-based detector of data races (runtime) ThreadSanitizer (Tsan) is a data race detector for C/C++ programs. The Linux and Mac versions are based on Valgrind. Homepage: http://gcc.gnu.org/ Package: libtwolame0 Status: install ok installed Priority: optional Section: libs Installed-Size: 147 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: twolame Version: 0.4.0-2 Depends: libc6 (>= 2.29) Description: MPEG Audio Layer 2 encoding library TwoLAME is an optimized MPEG Audio Layer 2 encoder. It is based on tooLAME by Mike Cheng, which in turn is based upon the ISO dist10 code and portions of LAME. . TwoLAME does NOT support MPEG Audio Layer 3 (MP3) encoding due to patent issues surrounding MP3. . However, as most MPEG Audio players are able to play layer 2 (MP2) files, TwoLAME makes a very good drop-in replacement for LAME and other layer 3 encoders. . This package contains the shared library. Homepage: http://www.twolame.org Package: libubsan1 Status: install ok installed Priority: optional Section: libs Installed-Size: 2652 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-12 Version: 12.2.0-14+deb12u1 Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.1.1) Description: UBSan -- undefined behaviour sanitizer (runtime) UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined. Various computations will be instrumented to detect undefined behavior at runtime. Available for C and C++. Homepage: http://gcc.gnu.org/ Package: libuchardet0 Status: install ok installed Priority: optional Section: libs Installed-Size: 208 Maintainer: James Cowgill Architecture: amd64 Multi-Arch: same Source: uchardet Version: 0.0.7-1 Depends: libc6 (>= 2.4), libgcc-s1 (>= 3.0), libstdc++6 (>= 4.1.1) Description: universal charset detection library - shared library uchardet is a C language binding of the original C++ implementation of the universal charset detection library by Mozilla. . uchardet is a encoding detector library, which takes a sequence of bytes in an unknown character encoding without any additional information, and attempts to determine the encoding of the text. . This package contains the shared library. Homepage: https://www.freedesktop.org/wiki/Software/uchardet/ Package: libudev1 Status: install ok installed Priority: optional Section: libs Installed-Size: 240 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: same Source: systemd Version: 252.39-1~deb12u2 Depends: libc6 (>= 2.34) Description: libudev shared library This library provides APIs to introspect and enumerate devices on the local system. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: libudfread0 Status: install ok installed Priority: optional Section: libs Installed-Size: 56 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libudfread Version: 1.1.2-1 Depends: libc6 (>= 2.14) Description: UDF reader library This library allows reading UDF filesystems, like raw devices and image files. . The library is created and maintained by VideoLAN Project and is used by projects like VLC and Kodi. Homepage: https://www.videolan.org/developers/libudfread.html Package: libunbound8 Status: install ok installed Priority: optional Section: libs Installed-Size: 1236 Maintainer: unbound packagers Architecture: amd64 Multi-Arch: same Source: unbound Version: 1.17.1-2+deb12u4 Depends: libc6 (>= 2.34), libevent-2.1-7 (>= 2.1.8-stable), libgmp10 (>= 2:6.2.1+dfsg1), libhogweed6, libnettle8 Description: library implementing DNS resolution and validation libunbound performs and validates DNS lookups; it can be used to convert hostnames to IP addresses and back and obtain other information from the DNS. Cryptographic validation of results is performed with DNSSEC. Homepage: https://www.unbound.net/ Package: libunibilium4 Status: install ok installed Priority: optional Section: libs Installed-Size: 97 Maintainer: James McCoy Architecture: amd64 Multi-Arch: same Source: unibilium Version: 2.1.0-1 Depends: libc6 (>= 2.14) Description: simple, self-contained terminfo library Unibilium is a very basic terminfo library. It doesn't depend on curses or any other library. It also doesn't use global variables, so it should be thread-safe. Homepage: https://github.com/neovim/unibilium Package: libunistring2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1807 Maintainer: Jörg Frings-Fürst Architecture: amd64 Multi-Arch: same Source: libunistring Version: 1.0-2 Depends: libc6 (>= 2.34) Description: Unicode string library for C The 'libunistring' library implements Unicode strings (in the UTF-8, UTF-16, and UTF-32 encodings), together with functions for Unicode characters (character names, classifications, properties) and functions for string processing (formatted output, width, word breaks, line breaks, normalization, case folding, regular expressions). . This package contains the shared library. Homepage: https://www.gnu.org/software/libunistring/ Package: libunwind8 Status: install ok installed Priority: optional Section: libs Installed-Size: 196 Maintainer: Adrian Bunk Architecture: amd64 Multi-Arch: same Source: libunwind Version: 1.6.2-3 Replaces: libgcc1 (<< 1:4.0.0-2) Depends: libc6 (>= 2.34), liblzma5 (>= 5.1.1alpha+20110809) Conflicts: libunwind1-dev Description: library to determine the call-chain of a program - runtime The primary goal of this project is to define a portable and efficient C programming interface (API) to determine the call-chain of a program. The API additionally provides the means to manipulate the preserved (callee-saved) state of each call-frame and to resume execution at any point in the call-chain (non-local goto). The API supports both local (same-process) and remote (across-process) operation. As such, the API is useful in a number of applications. . This package includes the shared libraries Homepage: http://www.nongnu.org/libunwind Package: liburcu8 Status: install ok installed Priority: optional Section: libs Installed-Size: 344 Maintainer: Jon Bernard Architecture: amd64 Multi-Arch: same Source: liburcu Version: 0.13.2-1 Depends: libc6 (>= 2.34) Description: userspace RCU (read-copy-update) library This data synchronization library provides read-side access which scales linearly with the number of cores. It does so by allowing multiples copies of a given data structure to live at the same time, and by monitoring the data structure accesses to detect grace periods after which memory reclamation is possible. Homepage: https://liburcu.org/ Package: liburi-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 237 Maintainer: Debian Perl Group Architecture: all Multi-Arch: foreign Version: 5.17-1 Depends: perl:any, libregexp-ipv6-perl Suggests: libbusiness-isbn-perl (>= 3.005), libwww-perl Description: module to manipulate and access URI strings URI is a collection of Perl modules that represent and manipulate Uniform Resource Identifier (URI) references as specified in RFC 2396. . URI objects can be used to access and manipulate the various components that make up these strings. There are also methods to combine URIs in various ways. . The URI class replaces the URI::URL class that used to be distributed with libwww-perl. This package also includes an emulation of the old URI::URL interface, which implements both the old and the new interface. Homepage: https://metacpan.org/release/URI Package: liburing2 Status: install ok installed Priority: optional Section: libs Installed-Size: 44 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: liburing Version: 2.3-3 Depends: libc6 (>= 2.4) Description: Linux kernel io_uring access library - shared library This library provides helpers to setup and teardown io_uring instances, and also a simplified interface for applications that do not need (or want) to deal with the full kernel side implementation. . This package contains the shared library. Homepage: https://github.com/axboe/liburing Package: libusb-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 155 Maintainer: Aurelien Jarno Architecture: amd64 Multi-Arch: same Source: libusb-1.0 Version: 2:1.0.26-1 Depends: libc6 (>= 2.17), libudev1 (>= 183) Description: userspace USB programming library Library for programming USB applications without the knowledge of Linux kernel internals. . This package contains what you need to run programs that use this library. Homepage: http://www.libusb.info Package: libutempter0 Status: install ok installed Priority: optional Section: libs Installed-Size: 50 Maintainer: Christian Göttsche Architecture: amd64 Multi-Arch: same Source: libutempter Version: 1.2.1-3 Depends: libc6 (>= 2.34) Description: privileged helper for utmp/wtmp updates (runtime) The libutempter library provides interface for terminal emulators such as screen and xterm to record user sessions to utmp and wtmp files. . The utempter is a privileged helper used by libutempter library to manipulate utmp and wtmp files. Homepage: https://git.altlinux.org/people/ldv/packages/?p=libutempter.git Package: libuuid1 Status: install ok installed Priority: optional Section: libs Installed-Size: 79 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.38.1-5+deb12u3 Depends: libc6 (>= 2.25) Recommends: uuid-runtime Description: Universally Unique ID library The libuuid library generates and parses 128-bit Universally Unique IDs (UUIDs). A UUID is an identifier that is unique within the space of all such identifiers across both space and time. It can be used for multiple purposes, from tagging objects with an extremely short lifetime to reliably identifying very persistent objects across a network. . See RFC 4122 for more information. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: libuv1 Status: install ok installed Priority: optional Section: libs Installed-Size: 294 Maintainer: Dominique Dumont Architecture: amd64 Multi-Arch: same Version: 1.44.2-1+deb12u1 Depends: libc6 (>= 2.34) Description: asynchronous event notification library - runtime library Libuv is the asynchronous library behind Node.js. Very similar to libevent or libev, it provides the main elements for event driven systems: watching and waiting for availability in a set of sockets, and some other events like timers or asynchronous messages. However, libuv also comes with some other extras like: * files watchers and asynchronous operations * a portable TCP and UDP API, as well as asynchronous DNS resolution * processes and threads management, and a portable inter-process communications mechanism, with pipes and work queues * a plugins mechanism for loading libraries dynamically * interface with external libraries that also need to access the I/O. . This package includes the dynamic library against which you can link your program. Homepage: https://github.com/libuv/libuv Package: libva-drm2 Status: install ok installed Priority: optional Section: libs Installed-Size: 43 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libva Version: 2.17.0-1 Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.60), libva2 (>= 2.17.0), libva2 (<< 2.17.0.1) Description: Video Acceleration (VA) API for Linux -- DRM runtime Video Acceleration API (VA API) is a library ("libVA") and API specification which enables and provides access to graphics hardware (GPU) acceleration for video processing on Linux and UNIX based operating systems. Accelerated processing includes video decoding, video encoding, subpicture blending and rendering. The specification was originally designed by Intel for its GMA (Graphics Media Accelerator) series of GPU hardware, the API is however not limited to GPUs or Intel specific hardware, as other hardware and manufacturers can also freely use this API for hardware accelerated video decoding. . This package provides the libva-drm library. Homepage: https://01.org/linuxmedia/vaapi Package: libva-x11-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 55 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libva Version: 2.17.0-1 Depends: libc6 (>= 2.33), libdrm2 (>= 2.4.60), libva2 (>= 2.17.0), libva2 (<< 2.17.0.1), libx11-6 (>= 2:1.4.99.1), libx11-xcb1 (>= 2:1.8.3), libxcb-dri3-0, libxcb1, libxext6, libxfixes3 Description: Video Acceleration (VA) API for Linux -- X11 runtime Video Acceleration API (VA API) is a library ("libVA") and API specification which enables and provides access to graphics hardware (GPU) acceleration for video processing on Linux and UNIX based operating systems. Accelerated processing includes video decoding, video encoding, subpicture blending and rendering. The specification was originally designed by Intel for its GMA (Graphics Media Accelerator) series of GPU hardware, the API is however not limited to GPUs or Intel specific hardware, as other hardware and manufacturers can also freely use this API for hardware accelerated video decoding. . This package provides the libva-x11 library. Homepage: https://01.org/linuxmedia/vaapi Package: libva2 Status: install ok installed Priority: optional Section: libs Installed-Size: 217 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libva Version: 2.17.0-1 Provides: libva-driver-abi-1.0, libva-driver-abi-1.1, libva-driver-abi-1.10, libva-driver-abi-1.11, libva-driver-abi-1.12, libva-driver-abi-1.13, libva-driver-abi-1.14, libva-driver-abi-1.15, libva-driver-abi-1.16, libva-driver-abi-1.17, libva-driver-abi-1.2, libva-driver-abi-1.3, libva-driver-abi-1.4, libva-driver-abi-1.5, libva-driver-abi-1.6, libva-driver-abi-1.7, libva-driver-abi-1.8, libva-driver-abi-1.9 Depends: libc6 (>= 2.34) Recommends: va-driver-all | va-driver Description: Video Acceleration (VA) API for Linux -- runtime Video Acceleration API (VA API) is a library ("libVA") and API specification which enables and provides access to graphics hardware (GPU) acceleration for video processing on Linux and UNIX based operating systems. Accelerated processing includes video decoding, video encoding, subpicture blending and rendering. The specification was originally designed by Intel for its GMA (Graphics Media Accelerator) series of GPU hardware, the API is however not limited to GPUs or Intel specific hardware, as other hardware and manufacturers can also freely use this API for hardware accelerated video decoding. . This package provides the main libva library. Homepage: https://01.org/linuxmedia/vaapi Package: libvbr2 Status: install ok installed Priority: optional Section: libs Installed-Size: 71 Maintainer: David Bürgin Architecture: amd64 Multi-Arch: same Source: opendkim Version: 2.11.0~beta2-8+deb12u1 Depends: libc6 (>= 2.34) Description: Vouch By Reference (VBR) library The OpenDKIM Project is a community effort to develop and maintain a C library for producing DKIM-aware applications and an open source milter for providing DomainKeys Identified Mail (DKIM) service. . This package provides library for implementing RFC 5518 Vouch By Reference (VBR), a peer-to-peer domain reputation service protocol based on DKIM signed domains. . Vouch By Reference, or VBR, is a protocol for adding third-party certification to email. Specifically, VBR permits independent third parties to certify the owner of a domain name that is associated with received mail. VBR may be performed anywhere along the email transit path, by any capable receiving module, either within the handling service or by end-user software. Homepage: http://www.opendkim.org/ Package: libvdpau1 Status: install ok installed Priority: optional Section: libs Installed-Size: 106 Maintainer: Debian NVIDIA Maintainers Architecture: amd64 Multi-Arch: same Source: libvdpau Version: 1.5-2 Depends: libc6 (>= 2.34), libx11-6 (>= 2:1.4.99.1), libxext6 Recommends: vdpau-driver-all | vdpau-driver Conffiles: /etc/vdpau_wrapper.cfg bc89239208609c5d031b74c99a45747d Description: Video Decode and Presentation API for Unix (libraries) VDPAU (Video Decode and Presentation API for Unix) is an open source library (libvdpau) and API designed by NVIDIA originally for its GeForce 8 series and later GPU hardware, targeted at the X Window System on Unix operating-systems (including Linux, FreeBSD, and Solaris). This VDPAU API allows video programs to offload portions of the video decoding process and video post-processing to the GPU video-hardware. . This package contains the VDPAU wrapper and trace libraries. Homepage: https://www.freedesktop.org/wiki/Software/VDPAU/ Package: libvidstab1.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 99 Maintainer: Keng-Yu Lin Architecture: amd64 Multi-Arch: same Source: libvidstab (1.1.0-2) Version: 1.1.0-2+b1 Depends: libc6 (>= 2.15), libgomp1 (>= 4.9) Description: video stabilization library (shared library) Imagine you captured a nice video with your camcorder, compact camera or even cell phone while skiing, cycling or whatever sports and the video is basically just jiggled. . Modern cameras come along with hardware stabilisation, however this does not work if you have really strong vibrations - rather the contrary - sometimes this mechanism starts to oscillate. . Vid.Stab is your friend in this matter. It is designed to stabilize even strongly jiggled clips. . This package contains the shared library. Homepage: http://public.hronopik.de/vid.stab/ Package: libvorbis0a Status: install ok installed Priority: optional Section: libs Installed-Size: 205 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libvorbis Version: 1.3.7-1 Depends: libc6 (>= 2.29), libogg0 (>= 1.1.0) Description: decoder library for Vorbis General Audio Compression Codec Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format for audio and music at fixed and variable bitrates from 16 to 128 kbps/channel. . The Vorbis library is the primary Ogg Vorbis library. Homepage: https://www.xiph.org/vorbis/ Package: libvorbisenc2 Status: install ok installed Priority: optional Section: libs Installed-Size: 703 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libvorbis Version: 1.3.7-1 Depends: libc6 (>= 2.4), libvorbis0a (= 1.3.7-1) Description: encoder library for Vorbis General Audio Compression Codec Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format for audio and music at fixed and variable bitrates from 16 to 128 kbps/channel. . The Vorbisenc library provides a convenient API for setting up an encoding environment using libvorbis. Homepage: https://www.xiph.org/vorbis/ Package: libvorbisfile3 Status: install ok installed Priority: optional Section: libs Installed-Size: 63 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libvorbis Version: 1.3.7-1 Depends: libc6 (>= 2.14), libogg0 (>= 1.1.0), libvorbis0a (= 1.3.7-1) Description: high-level API for Vorbis General Audio Compression Codec Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format for audio and music at fixed and variable bitrates from 16 to 128 kbps/channel. . The Vorbisfile library provides a convenient high-level API for decoding and basic manipulation of all Vorbis-I audio streams. Homepage: https://www.xiph.org/vorbis/ Package: libvpx7 Status: install ok installed Priority: optional Section: libs Installed-Size: 3061 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libvpx Version: 1.12.0-1+deb12u5 Depends: libc6 (>= 2.34) Description: VP8 and VP9 video codec (shared library) VP8 and VP9 are open video codecs, originally developed by On2 and released as open source by Google Inc. They are the successor of the VP3 codec, on which the Theora codec was based. . This package contains the shared libraries. Homepage: https://www.webmproject.org Package: libvterm0 Status: install ok installed Priority: optional Section: libs Installed-Size: 85 Maintainer: James McCoy Architecture: amd64 Multi-Arch: same Source: libvterm Version: 0.1.4-1 Depends: libc6 (>= 2.14) Breaks: neovim (<< 0.4), pangoterm (<< 0~bzr608) Description: abstract terminal library An abstract C99 library which implements a VT220 or xterm-like terminal emulator. It doesn't use any particular graphics toolkit or output system, instead it invokes callback function pointers that its embedding program should provide it to draw on its behalf. It avoids calling malloc() during normal running state, allowing it to be used in embedded kernel situations. Homepage: http://www.leonerd.org.uk/code/libvterm/ Package: libvulkan1 Status: install ok installed Priority: optional Section: libs Installed-Size: 477 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: vulkan-loader Version: 1.3.239.0-1 Replaces: libvulkan-dev (<< 1.1.70+dfsg1-2), vulkan-loader Depends: libc6 (>= 2.34) Recommends: mesa-vulkan-drivers | vulkan-icd Breaks: libvulkan-dev (<< 1.1.70+dfsg1-2), vulkan-loader Description: Vulkan loader library The Loader implements the main VK library. It handles layer management and driver management. The loader fully supports multi-gpu operation. As part of this, it dispatches API calls to the correct driver, and to the correct layers, based on the GPU object selected by the application. . This package includes the loader library. Homepage: https://github.com/KhronosGroup/Vulkan-Loader Package: libwayland-client0 Status: install ok installed Priority: optional Section: libs Installed-Size: 89 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: wayland Version: 1.21.0-1 Replaces: libwayland0 (<< 1.1.0-1) Depends: libc6 (>= 2.28), libffi8 (>= 3.4) Conflicts: libwayland0 (<< 1.1.0-1) Description: wayland compositor infrastructure - client library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships the library that implements the client side of the Wayland protocol. Homepage: https://wayland.freedesktop.org/ Package: libwayland-cursor0 Status: install ok installed Priority: optional Section: libs Installed-Size: 54 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: wayland Version: 1.21.0-1 Replaces: libwayland0 (<< 1.1.0-1) Depends: libc6 (>= 2.28), libwayland-client0 (>= 1.20.0) Conflicts: libwayland0 (<< 1.1.0-1) Description: wayland compositor infrastructure - cursor library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships a helper library to manage cursors. Homepage: https://wayland.freedesktop.org/ Package: libwayland-egl1 Status: install ok installed Priority: optional Section: libs Installed-Size: 33 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: wayland Version: 1.21.0-1 Replaces: libwayland-egl1-mesa (<< 18.0.5-0) Provides: libwayland-egl1-mesa Depends: libc6 (>= 2.2.5) Breaks: libwayland-egl1-mesa (<< 18.0.5-0) Description: wayland compositor infrastructure - EGL library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships the library that implements the Wayland EGL platform of the Wayland protocol. Homepage: https://wayland.freedesktop.org/ Package: libwayland-server0 Status: install ok installed Priority: optional Section: libs Installed-Size: 111 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: wayland Version: 1.21.0-1 Replaces: libwayland0 (<< 1.1.0-1) Depends: libc6 (>= 2.33), libffi8 (>= 3.4) Breaks: weston (<< 1.2.0) Conflicts: libwayland0 (<< 1.1.0-1) Description: wayland compositor infrastructure - server library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships the library that implements the server side of the Wayland protocol. Homepage: https://wayland.freedesktop.org/ Package: libwbclient0 Status: install ok installed Priority: optional Section: libs Installed-Size: 132 Maintainer: Debian Samba Maintainers Architecture: amd64 Multi-Arch: same Source: samba Version: 2:4.17.12+dfsg-0+deb12u4 Depends: libbsd0 (>= 0.0), libc6 (>= 2.34) Breaks: samba-libs (<< 2:4.11.0+dfsg-1~) Description: Samba winbind client library Samba is an implementation of the SMB/CIFS protocol for Unix systems, providing support for cross-platform file and printer sharing with Microsoft Windows, OS X, and other Unix systems. . This package provides a library for client applications that interact via the winbind pipe protocol with a Samba winbind server. Homepage: https://www.samba.org Package: libwebp7 Status: install ok installed Priority: optional Section: libs Installed-Size: 544 Maintainer: Jeff Breidenbach Architecture: amd64 Multi-Arch: same Source: libwebp Version: 1.2.4-0.2+deb12u1 Depends: libc6 (>= 2.34) Description: Lossy compression of digital photographic images Image Compression format, based on the VP8 codec. WebP uses the modern VP8 compression format to deliver efficient compression of images for the web. More than 30% extra gain over optimized JPEG, for same quality, is not unusual. Homepage: https://developers.google.com/speed/webp/ Package: libwebpdemux2 Status: install ok installed Priority: optional Section: libs Installed-Size: 120 Maintainer: Jeff Breidenbach Architecture: amd64 Multi-Arch: same Source: libwebp Version: 1.2.4-0.2+deb12u1 Depends: libc6 (>= 2.14), libwebp7 (>= 1.2.4) Description: Lossy compression of digital photographic images. Image Compression format, based on the VP8 codec. WebP uses the modern VP8 compression format to deliver efficient compression of images for the web. More than 30% extra gain over optimized JPEG, for same quality, is not unusual. Homepage: https://developers.google.com/speed/webp/ Package: libwebpmux3 Status: install ok installed Priority: optional Section: libs Installed-Size: 144 Maintainer: Jeff Breidenbach Architecture: amd64 Multi-Arch: same Source: libwebp Version: 1.2.4-0.2+deb12u1 Depends: libc6 (>= 2.29), libwebp7 (>= 1.2.4) Description: Lossy compression of digital photographic images Image Compression format, based on the VP8 codec. WebP uses the modern VP8 compression format to deliver efficient compression of images for the web. More than 30% extra gain over optimized JPEG, for same quality, is not unusual. Homepage: https://developers.google.com/speed/webp/ Package: libwrap0 Status: install ok installed Priority: optional Section: libs Installed-Size: 110 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: same Source: tcp-wrappers Version: 7.6.q-32 Depends: libc6 (>= 2.33), libnsl2 (>= 1.0) Description: Wietse Venema's TCP wrappers library Wietse Venema's network logger, also known as TCPD or LOG_TCP. . These programs log the client host name of incoming telnet, ftp, rsh, rlogin, finger etc. requests. . Security options are: - access control per host, domain and/or service; - detection of host name spoofing or host address spoofing; - booby traps to implement an early-warning system. Package: libx11-6 Status: install ok installed Priority: optional Section: libs Installed-Size: 1562 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libx11 Version: 2:1.8.4-2+deb12u2 Depends: libc6 (>= 2.34), libxcb1 (>= 1.11.1), libx11-data Breaks: libx11-xcb1 (<< 2:1.7.0-2) Description: X11 client-side library This package provides a client interface to the X Window System, otherwise known as 'Xlib'. It provides a complete API for the basic functions of the window system. . More information about X.Org can be found at: . This module can be found at https://gitlab.freedesktop.org/xorg/lib/libX11 Package: libx11-data Status: install ok installed Priority: optional Section: x11 Installed-Size: 1577 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: libx11 Version: 2:1.8.4-2+deb12u2 Description: X11 client-side library This package provides the locale data files for libx11. . More information about X.Org can be found at: . This module can be found at https://gitlab.freedesktop.org/xorg/lib/libX11 Package: libx11-xcb1 Status: install ok installed Priority: optional Section: libs Installed-Size: 252 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libx11 Version: 2:1.8.4-2+deb12u2 Depends: libx11-6 (= 2:1.8.4-2+deb12u2) Description: Xlib/XCB interface library libX11-xcb provides functions needed by clients which take advantage of Xlib/XCB to mix calls to both Xlib and XCB over the same X connection. . More information about X.Org can be found at: . More information about XCB can be found at: . This module can be found at https://gitlab.freedesktop.org/xorg/lib/libX11 Package: libx264-164 Status: install ok installed Priority: optional Section: libs Installed-Size: 1877 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: x264 Version: 2:0.164.3095+gitbaee400-3 Depends: libc6 (>= 2.34) Description: x264 video coding library libx264 is an advanced encoding library for creating H.264 (MPEG-4 AVC) video streams. . This package contains the libx264 shared library. Homepage: https://www.videolan.org/developers/x264.html Package: libx265-199 Status: install ok installed Priority: optional Section: libs Installed-Size: 16203 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: x265 (3.5-2) Version: 3.5-2+b1 Depends: libc6 (>= 2.34), libnuma1 (>= 2.0.11), libstdc++6 (>= 4.1.1) Description: H.265/HEVC video stream encoder (shared library) libx265 is an encoding library for creating H.265/High Efficiency Video Coding (HEVC) video streams. . This package contains the shared library. Homepage: http://x265.org Package: libx86-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 274 Maintainer: Seunghun Han Architecture: amd64 Multi-Arch: same Source: libx86 Version: 1.1+ds1-12 Depends: libc6 (>= 2.7) Description: x86 real-mode library A library to provide support for making real-mode calls x86 calls. On x86 hardware, vm86 mode is used. On other platforms, x86 emulation is provided. . This package contains the shared library. Homepage: https://www.codon.org.uk/~mjg59/libx86/ Package: libxapian30 Status: install ok installed Priority: optional Section: libs Installed-Size: 2666 Maintainer: Olly Betts Architecture: amd64 Multi-Arch: same Source: xapian-core Version: 1.4.22-1 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.4), libstdc++6 (>= 11), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Suggests: xapian-tools Description: Search engine library This package contains the core Xapian runtime library. . The Xapian search engine library is a highly adaptable toolkit which allows developers to easily add advanced indexing and search facilities to their own applications. It implements the probabilistic model of information retrieval, and provides facilities for performing ranked free-text searches, relevance feedback, phrase searching, boolean searching, stemming, and simultaneous update and searching. It is highly scalable, and is capable of working with collections containing hundreds of millions of documents. Homepage: https://xapian.org/ Package: libxau6 Status: install ok installed Priority: optional Section: libs Installed-Size: 42 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxau Version: 1:1.0.9-1 Depends: libc6 (>= 2.4) Description: X11 authorisation library This package provides the main interface to the X11 authorisation handling, which controls authorisation for X connections, both client-side and server-side. . More information about X.Org can be found at: . This module can be found at https://gitlab.freedesktop.org/xorg/lib/libxau Package: libxcb-dri2-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 136 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb Version: 1.15-1 Depends: libc6 (>= 2.4), libxcb1 Description: X C Binding, dri2 extension This package contains the library files needed to run software using libxcb-dri2, the dri2 extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-dri3-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 136 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb Version: 1.15-1 Depends: libc6 (>= 2.4), libxcb1 (>= 1.12) Description: X C Binding, dri3 extension This package contains the library files needed to run software using libxcb-dri3, the dri3 extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-glx0 Status: install ok installed Priority: optional Section: libs Installed-Size: 244 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb Version: 1.15-1 Depends: libc6 (>= 2.4), libxcb1 Description: X C Binding, glx extension This package contains the library files needed to run software using libxcb-glx, the glx extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-present0 Status: install ok installed Priority: optional Section: libs Installed-Size: 126 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb Version: 1.15-1 Depends: libc6 (>= 2.4), libxcb1 Description: X C Binding, present extension This package contains the library files needed to run software using libxcb-present, the present extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-randr0 Status: install ok installed Priority: optional Section: libs Installed-Size: 192 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb Version: 1.15-1 Depends: libc6 (>= 2.4), libxcb1 (>= 1.9.2) Description: X C Binding, randr extension This package contains the library files needed to run software using libxcb-randr, the randr extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-render0 Status: install ok installed Priority: optional Section: libs Installed-Size: 176 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb Version: 1.15-1 Depends: libc6 (>= 2.14), libxcb1 (>= 1.8) Description: X C Binding, render extension This package contains the library files needed to run software using libxcb-render, the render extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-shape0 Status: install ok installed Priority: optional Section: libs Installed-Size: 127 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb Version: 1.15-1 Depends: libc6 (>= 2.4), libxcb1 Description: X C Binding, shape extension This package contains the library files needed to run software using libxcb-shape, the shape extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-shm0 Status: install ok installed Priority: optional Section: libs Installed-Size: 126 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb Version: 1.15-1 Depends: libc6 (>= 2.4), libxcb1 (>= 1.12) Description: X C Binding, shm extension This package contains the library files needed to run software using libxcb-shm, the shm extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-sync1 Status: install ok installed Priority: optional Section: libs Installed-Size: 145 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb Version: 1.15-1 Depends: libc6 (>= 2.14), libxcb1 Description: X C Binding, sync extension This package contains the library files needed to run software using libxcb-sync, the sync extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb-xfixes0 Status: install ok installed Priority: optional Section: libs Installed-Size: 151 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb Version: 1.15-1 Depends: libc6 (>= 2.4), libxcb1 Description: X C Binding, xfixes extension This package contains the library files needed to run software using libxcb-xfixes, the xfixes extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcb1 Status: install ok installed Priority: optional Section: libs Installed-Size: 296 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcb Version: 1.15-1 Depends: libc6 (>= 2.14), libxau6 (>= 1:1.0.9), libxdmcp6 Breaks: alsa-utils (<< 1.0.24.2-5) Description: X C Binding This package contains the library files needed to run software using libxcb, the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: https://xcb.freedesktop.org Package: libxcursor1 Status: install ok installed Priority: optional Section: libs Installed-Size: 83 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcursor Version: 1:1.2.1-1 Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1), libxfixes3, libxrender1 Description: X cursor management library Xcursor is a simple library designed to help locate and load cursors for the X Window System. Cursors can be loaded from files or memory and can exist in several sizes; the library automatically picks the best size. When using images loaded from files, Xcursor prefers to use the Render extension's CreateCursor request for rendering cursors. Where the Render extension is not supported, Xcursor maps the cursor image to a standard X cursor and uses the core X protocol CreateCursor request. . Preferred themes for cursors can be installed if desired, via xcursor-themes or other cursor-theme or icon-theme packages, configured with update-alternatives --config x-cursor-theme. Homepage: https://www.x.org Package: libxdmcp6 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxdmcp Version: 1:1.1.2-3 Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4) Description: X11 Display Manager Control Protocol library This package provides the main interface to the X11 display manager control protocol library, which allows for remote logins to display managers. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXdmcp Package: libxext6 Status: install ok installed Priority: optional Section: libs Installed-Size: 132 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxext (2:1.3.4-1) Version: 2:1.3.4-1+b1 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0) Description: X11 miscellaneous extension library libXext provides an X Window System client interface to several extensions to the X protocol. . The supported protocol extensions are: - DOUBLE-BUFFER (DBE), the Double Buffer extension; - DPMS, the VESA Display Power Management System extension; - Extended-Visual-Information (EVI), an extension for gathering extra information about the X server's visuals; - LBX, the Low Bandwidth X extension; - MIT-SHM, the MIT X client/server shared memory extension; - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT; - Multi-Buffering, the multi-buffering and stereo display extension; - SECURITY, the X security extension; - SHAPE, the non-rectangular shaped window extension; - SYNC, the X synchronization extension; - TOG-CUP, the Open Group's Colormap Utilization extension; - XC-APPGROUP, the X Consortium's Application Group extension; - XC-MISC, the X Consortium's resource ID querying extension; - XTEST, the X test extension (this is one of two client-side implementations; the other is in the libXtst library, provided by the libxtst6 package); . libXext also provides a small set of utility functions to aid authors of client APIs for X protocol extensions. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXext Package: libxfixes3 Status: install ok installed Priority: optional Section: libs Installed-Size: 57 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxfixes Version: 1:6.0.0-2 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0) Description: X11 miscellaneous 'fixes' extension library libXfixes provides an X Window System client interface to the 'XFIXES' extension to the X protocol. . It provides support for Region types, and some cursor functions. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXfixes Package: libxi6 Status: install ok installed Priority: optional Section: libs Installed-Size: 149 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxi (2:1.8-1) Version: 2:1.8-1+b1 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6 Description: X11 Input extension library libXi provides an X Window System client interface to the XINPUT extension to the X protocol. . The Input extension allows setup and configuration of multiple input devices, and hotplugging of input devices (to be added and removed on the fly). . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXi Homepage: https://www.x.org/ Package: libxkbcommon0 Status: install ok installed Priority: optional Section: libs Installed-Size: 296 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxkbcommon Version: 1.5.0-1 Depends: xkb-data, libc6 (>= 2.33) Description: library interface to the XKB compiler - shared library This package provides a library to handle keyboard descriptions, including loading them from disk, parsing them and handling their state. It's mainly meant for client toolkits, window systems, and other system applications; currently that includes Wayland, kmscon, GTK+, Clutter, and more. . More information about X.Org can be found at: . This module can be found at https://github.com/xkbcommon/libxkbcommon.git Homepage: http://www.xkbcommon.org/ Package: libxml2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1867 Maintainer: Debian XML/SGML Group Architecture: amd64 Multi-Arch: same Version: 2.9.14+dfsg-1.3~deb12u5 Depends: libc6 (>= 2.34), libicu72 (>= 72.1~rc-1~), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3) Conflicts: w3c-dtd-xhtml Description: GNOME XML library XML is a metalanguage to let you design your own markup language. A regular markup language defines a way to describe information in a certain class of documents (eg HTML). XML lets you define your own customized markup languages for many classes of document. It can do this because it's written in SGML, the international standard metalanguage for markup languages. . This package provides a library providing an extensive API to handle such XML data files. Homepage: http://xmlsoft.org Package: libxmlb2 Status: install ok installed Priority: optional Section: libs Installed-Size: 190 Maintainer: Debian EFI team Architecture: amd64 Multi-Arch: same Source: libxmlb Version: 0.3.10-2 Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.53.2), liblzma5 (>= 5.1.1alpha+20120614) Description: Binary XML library The libxmlb library takes XML source, and converts it to a structured binary representation with a deduplicated string table -- where the strings have the NULs included. . This allows an application to mmap the binary XML file, do an XPath query and return some strings without actually parsing the entire document. This is all done using (almost) zero allocations and no actual copying of the binary data. Homepage: https://github.com/hughsie/libxmlb Package: libxmlsec1 Status: install ok installed Priority: optional Section: libs Installed-Size: 525 Maintainer: Debian XML/SGML Group Architecture: amd64 Multi-Arch: same Source: xmlsec1 Version: 1.2.37-2 Depends: libc6 (>= 2.14), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25) Description: XML security library The XML Security Library implements standards related to secure handling of XML data. . This package provides dynamic libraries for use by applications. Specifically, it provides all XML security library functionality except for the cryptography engine. Homepage: https://www.aleksey.com/xmlsec/ Package: libxmlsec1-openssl Status: install ok installed Priority: optional Section: libs Installed-Size: 322 Maintainer: Debian XML/SGML Group Architecture: amd64 Multi-Arch: same Source: xmlsec1 Version: 1.2.37-2 Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0), libxml2 (>= 2.7.4), libxmlsec1 (>= 1.2.35) Description: Openssl engine for the XML security library The XML Security Library implements standards related to secure handling of XML data. . This package provides dynamic libraries for use by applications. Specifically, it provides the openssl implementation of the XML security library cryptography functions. Homepage: https://www.aleksey.com/xmlsec/ Package: libxpm4 Status: install ok installed Priority: optional Section: libs Installed-Size: 111 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxpm Version: 1:3.5.12-1.1+deb12u1 Depends: libc6 (>= 2.34), libx11-6 Description: X11 pixmap library The X PixMap image format is an extension of the monochrome X BitMap format specified in the X protocol, and is commonly used in traditional X applications. . This package provides runtime support for XPM format. Homepage: https://www.x.org Package: libxrandr2 Status: install ok installed Priority: optional Section: libs Installed-Size: 88 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxrandr (2:1.5.2-2) Version: 2:1.5.2-2+b1 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6, libxrender1 Description: X11 RandR extension library libXrandr provides an X Window System client interface to the RandR extension to the X protocol. . The RandR extension allows for run-time configuration of display attributes such as resolution, rotation, and reflection. . More information about X.Org can be found at: . This module can be found at https://gitlab.freedesktop.org/xorg/lib/libXrandr Package: libxrender1 Status: install ok installed Priority: optional Section: libs Installed-Size: 78 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxrender Version: 1:0.9.10-1.1 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0) Description: X Rendering Extension client library The X Rendering Extension (Render) introduces digital image composition as the foundation of a new rendering model within the X Window System. Rendering geometric figures is accomplished by client-side tessellation into either triangles or trapezoids. Text is drawn by loading glyphs into the server and rendering sets of them. The Xrender library exposes this extension to X clients. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXrender Package: libxshmfence1 Status: install ok installed Priority: optional Section: libs Installed-Size: 26 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxshmfence Version: 1.3-1 Depends: libc6 (>= 2.27) Description: X shared memory fences - shared library This library provides an interface to shared-memory fences for synchronization between the X server and direct-rendering clients. . This package contains the xshmfence shared library. Package: libxslt1.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 493 Maintainer: Debian XML/SGML Group Architecture: amd64 Multi-Arch: same Source: libxslt Version: 1.1.35-1+deb12u4 Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.10.0), libxml2 (>= 2.9.0) Description: XSLT 1.0 processing library - runtime library XSLT is an XML language for defining transformations of XML files from XML to some other arbitrary format, such as XML, HTML, plain text, etc. using standard XSLT stylesheets. libxslt is a C library which implements XSLT version 1.0. . This package contains the libxslt library used by applications for XSLT transformations. Homepage: https://gitlab.gnome.org/GNOME/libxslt/-/wikis/home Package: libxss1 Status: install ok installed Priority: optional Section: libs Installed-Size: 42 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxss Version: 1:1.2.3-1 Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1), libxext6, x11-common Description: X11 Screen Saver extension library libXss provides an X Window System client interface to the MIT-SCREEN-SAVER extension to the X protocol. . The Screen Saver extension allows clients behaving as screen savers to register themselves with the X server, to better integrate themselves with the running session. . More information about X.Org can be found at: . This module can be found at https://gitlab.freedesktop.org/xorg/lib/libXScrnSaver Package: libxtables12 Status: install ok installed Priority: optional Section: libs Installed-Size: 101 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Multi-Arch: same Source: iptables Version: 1.8.9-2 Replaces: libxtables11 (>= 1.6.0+snapshot20161117-1) Depends: libc6 (>= 2.34) Breaks: libxtables11 (>= 1.6.0+snapshot20161117-1) Description: netfilter xtables library The iptables/xtables framework has been replaced by nftables. You should consider migrating now. . However, even if a given system may be fully running on native nftables, there are other reasons why libxtables might be installed. For one, nftables itself uses it to be able to display old rulesets that were created using xtables extensions (to help folks migrate). Other third-party software might also be linked to this library. . This library being installed in the system should be harmless in any case. . This package contains the user-space interface to the Netfilter xtables kernel framework. Homepage: https://www.netfilter.org/ Package: libxv1 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxv Version: 2:1.0.11-1.1 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6 Description: X11 Video extension library libXv provides an X Window System client interface to the XVideo extension to the X protocol. . The XVideo extension allows for accelerated drawing of videos. Hardware adaptors are exposed to clients, which may draw in a number of colourspaces, including YUV. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXv Package: libxvidcore4 Status: install ok installed Priority: optional Section: libs Installed-Size: 734 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: xvidcore Version: 2:1.3.7-1 Depends: libc6 (>= 2.29) Description: Open source MPEG-4 video codec (library) Xvid (formerly XviD) is an open source MPEG-4 video codec, implementing MPEG-4 Simple Profile, Advanced Simple Profile, and Advanced Video Coding standards. It is written in C with assembler optimizations for quality and speed (including MMX, SSE, and 3Dnow! code for i386 and AltiVec for PowerPC), and is especially optimized towards offline, multi-pass compression for storage and archival purposes. . This package contains the shared library. Homepage: https://labs.xvid.com/source/ Package: libxxf86vm1 Status: install ok installed Priority: optional Section: libs Installed-Size: 50 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxxf86vm (1:1.1.4-1) Version: 1:1.1.4-1+b2 Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6 Description: X11 XFree86 video mode extension library libXxf86vm provides an interface to the XFree86-VidModeExtension extension, which allows client applications to get and set video mode timings in extensive detail. It is used by the xvidtune program in particular. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXxf86vm Package: libxxhash0 Status: install ok installed Priority: optional Section: libs Installed-Size: 99 Maintainer: Josue Ortega Architecture: amd64 Multi-Arch: same Source: xxhash Version: 0.8.1-1 Depends: libc6 (>= 2.14) Description: shared library for xxhash xxHash is an Extremely fast Hash algorithm, running at RAM speed limits. It successfully completes the SMHasher test suite which evaluates collision, dispersion and randomness qualities of hash functions. Code is highly portable, and hashes are identical on all platforms (little / big endian). . This package contains the shared library. Homepage: https://cyan4973.github.io/xxHash Package: libyaml-0-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 152 Maintainer: Florian Ernst Architecture: amd64 Multi-Arch: same Source: libyaml Version: 0.2.5-1 Depends: libc6 (>= 2.14) Description: Fast YAML 1.1 parser and emitter library LibYAML is a C library for parsing and emitting data in YAML 1.1, a human-readable data serialization format. Homepage: https://github.com/yaml/libyaml Package: libytnef0 Status: install ok installed Priority: optional Section: libs Installed-Size: 118 Maintainer: Ricardo Mones Architecture: amd64 Multi-Arch: same Source: libytnef (2.0-1) Version: 2.0-1+b1 Depends: libc6 (>= 2.14) Description: improved decoder for application/ms-tnef attachments Yerase's TNEF Stream Reader allows you to decode application/ms-tnef e-mail attachments, which are usually entitled "winmail.dat" and are generally a file container format that is only readable by Microsoft Outlook. Some TNEF streams also include RTF-formatted data. . libytnef0 is the support library that exposes these functions to other programs. The ytnef program is the frontend for this library, so you should probably install that (included in ytnef-tools) if you want to take advantage of it. Homepage: https://github.com/Yeraze/ytnef Package: libyuv0 Status: install ok installed Priority: optional Section: libs Installed-Size: 671 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: libyuv Version: 0.0~git20230123.b2528b0-1 Replaces: libyuv Provides: libyuv Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.0), libjpeg62-turbo (>= 1.3.1), libstdc++6 (>= 5) Conflicts: libyuv Description: Library for YUV scaling (shared library) libyuv is an open source project that includes YUV scaling and conversion functionality. . This package provides the shared library. Homepage: https://chromium.googlesource.com/libyuv/libyuv/ Package: libz3-4 Status: install ok installed Priority: optional Section: libs Installed-Size: 22767 Maintainer: LLVM Packaging Team Architecture: amd64 Multi-Arch: same Source: z3 Version: 4.8.12-3.1 Replaces: libz3-dev (<< 4.4.1) Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.4), libstdc++6 (>= 12) Breaks: libz3-dev (<< 4.4.1) Description: theorem prover from Microsoft Research - runtime libraries Z3 is a state-of-the-art theorem prover from Microsoft Research. It can be used to check the satisfiability of logical formulas over one or more theories. Z3 offers a compelling match for software analysis and verification tools, since several common software constructs map directly into supported theories. . This package contains runtime libraries. You shouldn't have to install it manually. Homepage: https://github.com/Z3Prover/z3 Package: libzeroc-ice3.7 Status: install ok installed Priority: optional Section: libs Installed-Size: 12679 Maintainer: José Gutiérrez de la Concha Architecture: amd64 Multi-Arch: same Source: zeroc-ice (3.7.8-2.1) Version: 3.7.8-2.1+b1 Depends: adduser, libbz2-1.0, libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libdbus-1-3 (>= 1.9.14), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.0), liblmdb0 (>= 0.9.7), libssl3 (>= 3.0.0), libstdc++6 (>= 11), libsystemd0 Description: C++ run-time libraries for the Ice framework This package contains C++ run-time libraries for the Ice framework. . Ice is a comprehensive RPC framework that helps you network your software with minimal effort. Ice takes care of all interactions with low-level network programming interfaces and allows you to focus your efforts on your application logic. Homepage: https://zeroc.com Package: libzimg2 Status: install ok installed Priority: optional Section: libs Installed-Size: 852 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: zimg Version: 3.0.4+ds1-1 Depends: libc6 (>= 2.32), libgcc-s1 (>= 3.0), libstdc++6 (>= 11) Description: scaling, colorspace, depth conversion library (shared library) The "z" library implements the commonly required image processing basics of scaling, colorspace conversion, and depth conversion. A simple API enables conversion between any supported formats to operate with minimal knowledge from the programmer. . This package constains the shared library. Homepage: https://github.com/sekrit-twc/zimg Package: libzip4 Status: install ok installed Priority: optional Section: libs Installed-Size: 146 Maintainer: Stefan Schörghofer Architecture: amd64 Multi-Arch: same Source: libzip (1.7.3-1) Version: 1.7.3-1+b1 Depends: libbz2-1.0, libc6 (>= 2.33), libssl3 (>= 3.0.0), zlib1g (>= 1:1.1.4) Description: library for reading, creating, and modifying zip archives (runtime) libzip is a C library for reading, creating, and modifying zip archives. Files can be added from data buffers, files, or compressed data copied directly from other zip archives. Changes made without closing the archive can be reverted. . This package contains the files necessary for running applications that use the libzip library. Homepage: https://libzip.org Package: libzmq5 Status: install ok installed Priority: optional Section: libs Installed-Size: 808 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: zeromq3 Version: 4.3.4-6 Depends: libbsd0 (>= 0.0), libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgssapi-krb5-2 (>= 1.17), libnorm1 (>= 1.5r6), libpgm-5.3-0 (>= 5.1.116~dfsg), libsodium23 (>= 1.0.3), libstdc++6 (>= 12) Description: lightweight messaging kernel (shared library) ØMQ is a library which extends the standard socket interfaces with features traditionally provided by specialised messaging middleware products. . ØMQ sockets provide an abstraction of asynchronous message queues, multiple messaging patterns, message filtering (subscriptions), seamless access to multiple transport protocols and more. . This package contains the libzmq shared library. Homepage: https://www.zeromq.org/ Package: libzstd1 Status: install ok installed Priority: optional Section: libs Installed-Size: 785 Maintainer: RPM packaging team Architecture: amd64 Multi-Arch: same Source: libzstd Version: 1.5.4+dfsg2-5 Depends: libc6 (>= 2.34) Description: fast lossless compression algorithm Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting real-time compression scenarios at zlib-level compression ratio. . This package contains the shared library. Homepage: https://github.com/facebook/zstd Package: libzvbi-common Status: install ok installed Priority: optional Section: devel Installed-Size: 191 Maintainer: Ileana Dumitrescu Architecture: all Multi-Arch: foreign Source: zvbi Version: 0.2.41-1+deb12u1 Replaces: libzvbi-0.1 (<= 0.2.1-3) Description: Vertical Blanking Interval decoder (VBI) - common files The vertical blanking interval (VBI) is an interval in a television signal that temporarily suspends transmission of the signal for the electron gun to move back up to the first line of the television screen to trace the next screen field. . The vertical blanking interval can be used to carry data, since anything sent during the VBI would naturally not be displayed; various test signals, closed captioning, and other digital data can be sent during this time period. These include information like closed-caption data, Teletext (primarily in Europe), and now Intercast and the ATVEC Internet television encodings. . The Zapping VBI library, in short ZVBI, provides functions to capture and decode VBI data. It is written in plain ANSI C with few dependencies on other tools and libraries, licensed under GPL. Some features: * Captures raw VBI samples from V4L, V4L2 and FreeBSD BKTR devices, sliced VBI data from Linux DVB devices; * Implements a VBI Proxy to share one VBI device between multiple applications; * Has a robust and versatile bit slicer which handles a wide range of data services; * Functions to capture multiple data services at once, such as Closed Caption (both NTSC and PAL), Teletext, VPS, WSS, XDS; * Level 3.5 Teletext decoder with support for all Teletext character sets, graphics, 4096 colors, with built-in page cache including search functions; * Closed Caption decoder which supports roll-up, pop-up and paint-on style caption, color, expanded character set, text attributes and free text placement; * Renders Teletext and Caption pages, can export to HTML, PNG and other formats. * Can determine network names; * Can find Teletext subtitle and program pages; * Functions to extract data transmissions in Teletext streams (currently Page Format Clear and Independent Data Line Format A); * Can multiplex and demultiplex DVB VBI PES and TS streams. . This package contains internationalization files. Homepage: https://github.com/zapping-vbi/zvbi Package: libzvbi0 Status: install ok installed Priority: optional Section: libs Installed-Size: 727 Maintainer: Ileana Dumitrescu Architecture: amd64 Multi-Arch: same Source: zvbi Version: 0.2.41-1+deb12u1 Replaces: libzvbi-0.1 (<= 0.2.1-3) Depends: libc6 (>= 2.34), libpng16-16 (>= 1.6.2-1), libzvbi-common (= 0.2.41-1+deb12u1) Description: Vertical Blanking Interval decoder (VBI) - runtime files The vertical blanking interval (VBI) is an interval in a television signal that temporarily suspends transmission of the signal for the electron gun to move back up to the first line of the television screen to trace the next screen field. . The vertical blanking interval can be used to carry data, since anything sent during the VBI would naturally not be displayed; various test signals, closed captioning, and other digital data can be sent during this time period. These include information like closed-caption data, Teletext (primarily in Europe), and now Intercast and the ATVEC Internet television encodings. . The Zapping VBI library, in short ZVBI, provides functions to capture and decode VBI data. It is written in plain ANSI C with few dependencies on other tools and libraries, licensed under GPL. Some features: * Captures raw VBI samples from V4L, V4L2 and FreeBSD BKTR devices, sliced VBI data from Linux DVB devices; * Implements a VBI Proxy to share one VBI device between multiple applications; * Has a robust and versatile bit slicer which handles a wide range of data services; * Functions to capture multiple data services at once, such as Closed Caption (both NTSC and PAL), Teletext, VPS, WSS, XDS; * Level 3.5 Teletext decoder with support for all Teletext character sets, graphics, 4096 colors, with built-in page cache including search functions; * Closed Caption decoder which supports roll-up, pop-up and paint-on style caption, color, expanded character set, text attributes and free text placement; * Renders Teletext and Caption pages, can export to HTML, PNG and other formats. * Can determine network names; * Can find Teletext subtitle and program pages; * Functions to extract data transmissions in Teletext streams (currently Page Format Clear and Independent Data Line Format A); * Can multiplex and demultiplex DVB VBI PES and TS streams. Homepage: https://github.com/zapping-vbi/zvbi Package: linux-base Status: install ok installed Priority: optional Section: kernel Installed-Size: 76 Maintainer: Debian Kernel Team Architecture: all Multi-Arch: foreign Version: 4.12.1~deb12u1 Replaces: kernel-common (<= 13.018+nmu1) Depends: debconf (>= 0.5) | debconf-2.0 Breaks: kernel-common (<= 13.018+nmu1), linux-perf (<< 5.16.2-1~exp1) Description: Linux image base package This package contains files and support scripts for all Linux images. Package: linux-image-6.1.0-20-amd64 Status: install ok config-files Priority: optional Section: kernel Installed-Size: 398593 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.85+1) Version: 6.1.85-1 Config-Version: 6.1.85-1 Replaces: linux-image-6.1.0-20-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-20-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.85-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-21-amd64 Status: install ok config-files Priority: optional Section: kernel Installed-Size: 398592 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.90+1) Version: 6.1.90-1 Config-Version: 6.1.90-1 Replaces: linux-image-6.1.0-21-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-21-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.90-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-23-amd64 Status: install ok config-files Priority: optional Section: kernel Installed-Size: 398628 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.99+1) Version: 6.1.99-1 Config-Version: 6.1.99-1 Replaces: linux-image-6.1.0-23-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-23-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.99-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-25-amd64 Status: install ok config-files Priority: optional Section: kernel Installed-Size: 398844 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.106+3) Version: 6.1.106-3 Config-Version: 6.1.106-3 Replaces: linux-image-6.1.0-25-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-25-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.106-3) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-26-amd64 Status: install ok config-files Priority: optional Section: kernel Installed-Size: 398821 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.112+1) Version: 6.1.112-1 Config-Version: 6.1.112-1 Replaces: linux-image-6.1.0-26-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-26-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.112-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-32-amd64 Status: install ok config-files Priority: optional Section: kernel Installed-Size: 399128 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.129+1) Version: 6.1.129-1 Config-Version: 6.1.129-1 Replaces: linux-image-6.1.0-32-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-32-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.129-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-33-amd64 Status: install ok config-files Priority: optional Section: kernel Installed-Size: 399132 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.133+1) Version: 6.1.133-1 Config-Version: 6.1.133-1 Replaces: linux-image-6.1.0-33-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-33-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.133-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-37-amd64 Status: deinstall ok config-files Priority: optional Section: kernel Installed-Size: 399275 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.140+1) Version: 6.1.140-1 Config-Version: 6.1.140-1 Replaces: linux-image-6.1.0-37-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-37-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.140-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-39-amd64 Status: deinstall ok config-files Priority: optional Section: kernel Installed-Size: 398145 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.148+1) Version: 6.1.148-1 Config-Version: 6.1.148-1 Replaces: linux-image-6.1.0-39-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-39-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.148-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-42-amd64 Status: deinstall ok config-files Priority: optional Section: kernel Installed-Size: 399651 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.159+1) Version: 6.1.159-1 Config-Version: 6.1.159-1 Replaces: linux-image-6.1.0-42-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-42-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.159-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-43-amd64 Status: install ok installed Priority: optional Section: kernel Installed-Size: 399833 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.162+1) Version: 6.1.162-1 Replaces: linux-image-6.1.0-43-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-43-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.162-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-44-amd64 Status: install ok installed Priority: optional Section: kernel Installed-Size: 399826 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.164+1) Version: 6.1.164-1 Replaces: linux-image-6.1.0-44-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-44-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.164-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-45-amd64 Status: install ok installed Priority: optional Section: kernel Installed-Size: 399852 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.170+1) Version: 6.1.170-1 Replaces: linux-image-6.1.0-45-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-45-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.170-1) Homepage: https://www.kernel.org/ Package: linux-image-6.1.0-49-amd64 Status: install ok installed Priority: optional Section: kernel Installed-Size: 399986 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.174+1) Version: 6.1.174-1 Replaces: linux-image-6.1.0-49-amd64-unsigned Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: firmware-linux-free, apparmor Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Conflicts: linux-image-6.1.0-49-amd64-unsigned Description: Linux 6.1 for 64-bit PCs (signed) The Linux kernel 6.1 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . The kernel image and modules are signed for use with Secure Boot. Built-Using: linux (= 6.1.174-1) Homepage: https://www.kernel.org/ Package: linux-image-amd64 Status: install ok installed Priority: optional Section: kernel Installed-Size: 13 Maintainer: Debian Kernel Team Architecture: amd64 Source: linux-signed-amd64 (6.1.174+1) Version: 6.1.174-1 Provides: linux-image-generic, linux-latest-modules-6.1.0-49-amd64, virtualbox-guest-modules, wireguard-modules (= 1.0.0) Depends: linux-image-6.1.0-49-amd64 (= 6.1.174-1) Description: Linux for 64-bit PCs (meta-package) This package depends on the latest Linux kernel and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. Built-Using: linux (= 6.1.174-1) Homepage: https://www.kernel.org/ Package: linux-libc-dev Status: install ok installed Priority: optional Section: devel Installed-Size: 7007 Maintainer: Debian Kernel Team Architecture: amd64 Multi-Arch: same Source: linux Version: 6.1.174-1 Description: Linux support headers for userspace development This package provides userspaces headers from the Linux kernel. These headers are used by the installed headers for GNU libc and other system libraries. Homepage: https://www.kernel.org/ Package: locales Status: install ok installed Priority: standard Section: localization Installed-Size: 15847 Maintainer: GNU Libc Maintainers Architecture: all Source: glibc Version: 2.36-9+deb12u14 Depends: libc-bin (>> 2.36), libc-l10n (>> 2.36), debconf (>= 0.5) | debconf-2.0 Conffiles: /etc/locale.alias 4a3f5ef911616822ec6fe04e31930bbf Description: GNU C Library: National Language (locale) data [support] Machine-readable data files, shared objects and programs used by the C library for localization (l10n) and internationalization (i18n) support. . This package contains tools to generate locale definitions from source files (included in this package). It allows you to customize which definitions actually get generated. This is a space-saver over how this package used to be, with all locales generated by default. This created a package that unpacked to an excess of 30 megs. Homepage: https://www.gnu.org/software/libc/libc.html Package: locales-all Status: install ok installed Priority: optional Section: localization Installed-Size: 227367 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: foreign Source: glibc Version: 2.36-9+deb12u14 Depends: libc-l10n (>> 2.36) Description: GNU C Library: Precompiled locale data This package contains the precompiled locale data for all supported locales. A better alternative is to install the locales package and only select desired locales, but it can be useful on a low-memory machine because some locale files take a lot of memory to be compiled. Homepage: https://www.gnu.org/software/libc/libc.html Package: login Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 2550 Maintainer: Shadow package maintainers Architecture: amd64 Multi-Arch: foreign Source: shadow Version: 1:4.13+dfsg1-1+deb12u2 Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules Conflicts: python-4suite (<< 0.99cvs20060405-1) Conffiles: /etc/login.defs f43a7b1eb7e082f1d4e2cb8f8376e71b /etc/pam.d/login 5afbc06eb5f71fef25170cf3c936a442 Description: system login tools This package provides some required infrastructure for logins and for changing effective user or group IDs, including: * login, the program that invokes a user shell on a virtual terminal; * nologin, a dummy shell for disabled user accounts; Homepage: https://github.com/shadow-maint/shadow Package: logrotate Status: install ok installed Priority: important Section: admin Installed-Size: 160 Maintainer: Christian Göttsche Architecture: amd64 Multi-Arch: foreign Version: 3.21.0-1 Depends: cron | anacron | cron-daemon | systemd-sysv, libacl1 (>= 2.2.23), libc6 (>= 2.34), libpopt0 (>= 1.14), libselinux1 (>= 3.1~) Suggests: bsd-mailx | mailx Conffiles: /etc/cron.daily/logrotate 31da718265eaaa2fdabcfb2743bda171 /etc/logrotate.conf bb61e48721fc3fb8e58002bce2f9a571 /etc/logrotate.d/btmp 55631862595faf6432786dc335eb3f44 /etc/logrotate.d/wtmp 46cd7ecb1810441bd450987a976f5540 Description: Log rotation utility The logrotate utility is designed to simplify the administration of log files on a system which generates a lot of log files. Logrotate allows for the automatic rotation compression, removal and mailing of log files. Logrotate can be set to handle a log file daily, weekly, monthly or when the log file gets to a certain size. Normally, logrotate runs as a daily cron job. Homepage: https://github.com/logrotate/logrotate Package: logsave Status: install ok installed Priority: optional Section: admin Installed-Size: 50 Maintainer: Theodore Y. Ts'o Architecture: amd64 Multi-Arch: foreign Source: e2fsprogs (1.47.0-2) Version: 1.47.0-2+b2 Replaces: e2fsprogs (<< 1.45.3-1) Depends: libc6 (>= 2.34) Breaks: e2fsprogs (<< 1.45.3-1) Description: save the output of a command in a log file The logsave program will execute cmd_prog with the specified argument(s), and save a copy of its output to logfile. If the containing directory for logfile does not exist, logsave will accumulate the output in memory until it can be written out. A copy of the output will also be written to standard output. Homepage: http://e2fsprogs.sourceforge.net Package: lsb-release Status: install ok installed Priority: optional Section: misc Installed-Size: 17 Maintainer: Gioele Barabucci Architecture: all Multi-Arch: foreign Source: lsb-release-minimal Version: 12.0-1 Description: Linux Standard Base version reporting utility (minimal implementation) The Linux Standard Base (http://www.linuxbase.org/) is a standard core system that third-party applications written for Linux can depend upon. . The lsb-release command is a simple tool to help identify the Linux distribution being used and its compliance with the Linux Standard Base. . This package contains a bare-bones implementation that uses the information in /etc/os-release instead of relying on LSB packages. Homepage: https://gioele.io/lsb-release-minimal Package: lsof Status: install ok installed Priority: standard Section: utils Installed-Size: 482 Maintainer: Andres Salomon Architecture: amd64 Version: 4.95.0-1 Depends: libc6 (>= 2.33), libselinux1 (>= 3.1~), libtirpc3 (>= 1.0.2) Description: utility to list open files Lsof is a Unix-specific diagnostic tool. Its name stands for LiSt Open Files, and it does just that. It lists information about any files that are open, by processes currently running on the system. Homepage: https://github.com/lsof-org/lsof Package: lua-bitop Status: install ok installed Priority: optional Section: interpreters Installed-Size: 86 Maintainer: Debian Lua Team Architecture: amd64 Multi-Arch: same Version: 1.0.2-7 Replaces: liblua5.1-bitop0 (<< 1.0.1-6~) Provides: liblua5.1-bitop0, lua5.1-bitop, lua5.2-bitop, lua5.3-bitop, lua5.4-bitop Depends: libc6 (>= 2.4) Breaks: liblua5.1-bitop0 (<< 1.0.1-6~) Description: fast bit manipulation library for the Lua language This package contains the Lua bitop fast bit manipulation library. Homepage: http://bitop.luajit.org Lua-Versions: 5.1 5.2 5.3 5.4 Package: lua-expat Status: install ok installed Priority: optional Section: interpreters Installed-Size: 208 Maintainer: Debian Lua Team Architecture: amd64 Multi-Arch: same Version: 1.5.1-3 Provides: lua5.1-expat, lua5.2-expat, lua5.3-expat, lua5.4-expat Depends: libc6 (>= 2.4), libexpat1 (>= 2.4.1) Description: libexpat bindings for the Lua language This package contains the bindings for the expat library. Homepage: https://github.com/lunarmodules/luaexpat/ Lua-Versions: 5.1 5.2 5.3 5.4 Package: lua-filesystem Status: install ok installed Priority: optional Section: interpreters Installed-Size: 118 Maintainer: Debian Lua Team Architecture: amd64 Multi-Arch: same Version: 1.8.0-3 Provides: lua5.1-filesystem, lua5.2-filesystem, lua5.3-filesystem, lua5.4-filesystem Depends: libc6 (>= 2.33) Description: luafilesystem library for the Lua language This package contains the luafilesystem library, a set of portable functions for directory creation, listing and deletion and for file locking. Homepage: https://github.com/keplerproject/luafilesystem Lua-Versions: 5.1 5.2 5.3 5.4 Package: lua-lpeg Status: install ok installed Priority: optional Section: interpreters Installed-Size: 252 Maintainer: Enrico Tassi Architecture: amd64 Multi-Arch: same Version: 1.0.2-2 Provides: lua5.1-lpeg, lua5.2-lpeg, lua5.3-lpeg, lua5.4-lpeg Depends: libc6 (>= 2.14) Description: LPeg library for the Lua language LPeg is a new pattern-matching library for Lua, based on Parsing Expression Grammars (PEGs). PEGs look similar to regular expressions or context-free grammars in Backus-Naur form (BNF) notation. PEGs make a good replacement for regular expressions, because they are strictly more powerful. For example, a regular expression inherently cannot find matched pairs of parentheses, because it is not recursive, but a PEG can. Homepage: http://www.inf.puc-rio.br/~roberto/lpeg.html Lua-Versions: 5.1 5.2 5.3 5.4 Package: lua-luv Status: install ok installed Priority: optional Section: interpreters Installed-Size: 748 Maintainer: Debian Lua Team Architecture: amd64 Multi-Arch: same Version: 1.44.2-0-1 Provides: lua5.1-luv, lua5.2-luv, lua5.3-luv, lua5.4-luv Depends: libc6 (>= 2.14), libuv1 (>= 1.44.1) Description: libuv bindings for Lua libuv is a multi-platform support library with a focus on asynchronous I/O. . This package provides libuv bindings for the Lua programming language. Homepage: https://github.com/luvit/luv Lua-Versions: 5.1 5.2 5.3 5.4 Package: lua-resty-core Status: install ok installed Priority: optional Section: net Installed-Size: 234 Maintainer: Jan Mojžíš Architecture: all Version: 0.1.25-1 Provides: lua5.1-resty-core Depends: libluajit2-5.1-2, libnginx-mod-http-lua (<< 1:0.10.23.1~), libnginx-mod-http-lua (>= 1:0.10.23), lua-resty-lrucache Description: New FFI-based Lua API for NGINX Lua module This pure Lua library reimplements part of the ngx_lua module's Nginx API for Lua with LuaJIT FFI and installs the new FFI-based Lua API into the ngx.* and ndk.* namespaces used by the ngx_lua module. In addition, this Lua library implements any significant new Lua APIs of the ngx_lua module as proper Lua modules, like ngx.semaphore and ngx.balancer. The FFI-based Lua API can work with LuaJIT's JIT compiler. ngx_lua's default API is based on the standard Lua C API, which will never be JIT compiled and the user Lua code is always interpreted (slowly). Homepage: https://github.com/openresty/lua-resty-core Lua-Versions: 5.1 Package: lua-resty-lrucache Status: install ok installed Priority: optional Section: net Installed-Size: 42 Maintainer: Jan Mojžíš Architecture: all Version: 0.13-10 Provides: lua5.1-resty-lrucache Depends: libluajit2-5.1-2 Description: Simple LRU cache for the ngx_lua module The LRU cache resides completely in the Lua VM and is subject to Lua GC. As such, do not expect it to get shared across the OS process boundary. The upside is that you can cache arbitrary complex Lua values (such as deep nested Lua tables) without the overhead of serialization (as with ngx_lua's shared dictionary API). The downside is that your cache is always limited to the current OS process (i.e. the current Nginx worker process). It does not really make much sense to use this library in the context of init_by_lua because the cache will not get shared by any of the worker processes (unless you just want to "warm up" the cache with predefined items which will get inherited by the workers via fork()). Homepage: https://github.com/openresty/lua-resty-lrucache Lua-Versions: 5.1 Package: lua-sec Status: install ok installed Priority: optional Section: interpreters Installed-Size: 328 Maintainer: Debian Lua Team Architecture: amd64 Multi-Arch: same Version: 1.2.0-2 Provides: lua5.1-sec, lua5.2-sec, lua5.3-sec, lua5.4-sec Depends: lua-socket (>= 3.1.0), libc6 (>= 2.4), libssl3 (>= 3.0.0) Description: SSL socket library for the Lua language This package contains the luasec library, that adds on top of the luasocket library SSL support. Homepage: https://github.com/brunoos/luasec Lua-Versions: 5.1 5.2 5.3 5.4 Package: lua-socket Status: install ok installed Priority: optional Section: interpreters Installed-Size: 910 Maintainer: Debian Lua Team Architecture: amd64 Multi-Arch: same Source: luasocket (3.1.0-1) Version: 3.1.0-1+b1 Provides: lua5.1-socket, lua5.2-socket, lua5.3-socket, lua5.4-socket Depends: libc6 (>= 2.15) Description: TCP/UDP socket library for the Lua language Luasocket provides a TCP/UDP socket library for the Lua language . Also provided are HTTP and SMTP implementations, a simple FTP implementation and some URL parsing functions. . Luasocket supports blocking and non-blocking sockets and also provides a select() interface to the language. Homepage: https://lunarmodules.github.io/luasocket/ Lua-Versions: 5.1 5.2 5.3 5.4 Package: lua5.4 Status: install ok installed Priority: optional Section: interpreters Installed-Size: 462 Maintainer: Debian Lua Team Architecture: amd64 Multi-Arch: foreign Version: 5.4.4-3+deb12u1 Provides: lua Depends: libc6 (>= 2.34), libreadline8 (>= 6.0) Description: Simple, extensible, embeddable programming language Lua is a powerful, light-weight programming language designed for extending applications. The language engine is accessible as a library, having a C API which allows the application to exchange data with Lua programs and also to extend Lua with C functions. Lua is also used as a general-purpose, stand-alone language through the simple command line interpreter provided. . This package contains the Lua command line interpreter and bytecode compiler. Install it if you are developing or using Lua scripts. Homepage: http://www.lua.org Package: lvm2 Status: install ok installed Priority: optional Section: admin Installed-Size: 4009 Maintainer: Debian LVM Team Architecture: amd64 Multi-Arch: foreign Version: 2.03.16-2 Depends: libaio1 (>= 0.3.93), libblkid1 (>= 2.24.2), libc6 (>= 2.34), libdevmapper-event1.02.1 (>= 2:1.02.74), libedit2 (>= 2.11-20080614-0), libselinux1 (>= 3.1~), libsystemd0 (>= 233), libudev1 (>= 183), lsb-base, dmsetup (>= 2:1.02.185-2~), dmeventd (>= 2:1.02.185-2~) Recommends: thin-provisioning-tools Conffiles: /etc/lvm/lvm.conf daa2538ce1abd1d6c249c8b53d951de2 /etc/lvm/lvmlocal.conf a149b0ec175b15065a7ae82c849e77c9 /etc/lvm/profile/cache-mq.profile 9df1883c03bac9d3041e75745cb5e0ec /etc/lvm/profile/cache-smq.profile d27b7f0947c6ac21944c05e6098b9850 /etc/lvm/profile/command_profile_template.profile 3bab119bec857c31a53725da2d0a9408 /etc/lvm/profile/lvmdbusd.profile ffa904d375ce53ebb6befe7d65cf391a /etc/lvm/profile/metadata_profile_template.profile bccbaf503cb8f0adb5b4f841f7c1f735 /etc/lvm/profile/thin-generic.profile f57ede2b5b249024766c51a223e15ed5 /etc/lvm/profile/thin-performance.profile f4de81439550553043e04f019a48a827 /etc/lvm/profile/vdo-small.profile da26d10e71e517a6f02ff0d53395e3c9 Description: Linux Logical Volume Manager This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM supports enterprise level volume management of disk and disk subsystems by grouping arbitrary disks into volume groups. The total capacity of volume groups can be allocated to logical volumes, which are accessed as regular block devices. Homepage: https://sourceware.org/lvm2/ Package: m4 Status: install ok installed Priority: optional Section: interpreters Installed-Size: 670 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Version: 1.4.19-3 Depends: libc6 (>= 2.34) Suggests: m4-doc Description: macro processing language GNU `m4' is an implementation of the traditional UNIX macro processor. It is mostly SVR4 compatible, although it has some extensions (for example, handling more than 9 positional parameters to macros). `m4' also has builtin functions for including files, running shell commands, doing arithmetic, etc. Autoconf needs GNU `m4' for generating `configure' scripts, but not for running them. Homepage: https://www.gnu.org/software/m4/ Package: mailcap Status: install ok installed Priority: optional Section: utils Installed-Size: 86 Maintainer: Mime-Support Packagers Architecture: all Multi-Arch: foreign Version: 3.70+nmu1 Replaces: mime-support (<< 3.65) Provides: run-mailcap Depends: perl, media-types Recommends: bzip2, file, xz-utils Breaks: mime-support (<< 3.65) Conffiles: /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e Description: Debian's mailcap system, and support programs The mailcap system associates media types with programs that can handle them, using system and user configuration files. A file's media type is determined by its extension or by running the "file" command if available. . Other packages register their programs as viewers/editors/composers/etc by placing mailcap entry files or FreeDesktop menu entries in predetermined directories monitored by this package's dpkg triggers. . This package provides a "run-mailcap" program to open arbitrary files, and in addition the "see", "edit", "compose", and "print" aliases to display, alter, create, and print (respectively). . This package also provides the "debian-view" utility to handle Debian packages interactively. Package: make Status: install ok installed Priority: optional Section: devel Installed-Size: 1592 Maintainer: Manoj Srivastava Architecture: amd64 Multi-Arch: allowed Source: make-dfsg Version: 4.3-4.1 Replaces: make-guile Depends: libc6 (>= 2.27) Suggests: make-doc Conflicts: make-guile Description: utility for directing compilation GNU Make is a utility which controls the generation of executables and other target files of a program from the program's source files. It determines automatically which pieces of a large program need to be (re)created, and issues the commands to (re)create them. Make can be used to organize any task in which targets (files) are to be automatically updated based on input files whenever the corresponding input is newer --- it is not limited to building computer programs. Indeed, Make is a general purpose dependency solver. Homepage: https://www.gnu.org/software/make/ Package: man-db Status: install ok installed Priority: important Section: doc Installed-Size: 2963 Maintainer: Colin Watson Architecture: amd64 Multi-Arch: foreign Version: 2.11.2-2 Replaces: man, nlsutils Provides: man, man-browser Depends: bsdextrautils | bsdmainutils (<< 12.1.1~), groff-base, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libgdbm6 (>= 1.16), libpipeline1 (>= 1.5.0), libseccomp2 (>= 2.1.0), zlib1g (>= 1:1.1.4) Suggests: apparmor, groff, less, www-browser Conflicts: man Conffiles: /etc/apparmor.d/usr.bin.man 4f614d75041882370498f7fe2d43a44b /etc/cron.daily/man-db 62423d7fa68568c9c0aefceac182d9ea /etc/cron.weekly/man-db eebc5bb3e1dac973301570da3f453334 /etc/manpath.config 6d70333de0a08c7a71018da458201eb6 Description: tools for reading manual pages This package provides the man command, the primary way of examining the system help files (manual pages). Other utilities provided include the whatis and apropos commands for searching the manual page database, the manpath utility for determining the manual page search path, and the maintenance utilities mandb, catman and zsoelim. man-db uses the groff suite of programs to format and display the manual pages. Homepage: https://man-db.gitlab.io/man-db/ Package: manpages Status: install ok installed Priority: standard Section: doc Installed-Size: 1548 Maintainer: Dr. Tobias Quathamer Architecture: all Multi-Arch: foreign Version: 6.03-2 Replaces: initscripts (<< 3.0.0-1), inn2-dev (<< 2.6.5-1), manpages-dev (<< 5.09-2) Suggests: man-browser Breaks: initscripts (<< 3.0.0-1), inn2-dev (<< 2.6.5-1), manpages-dev (<< 5.09-2) Description: Manual pages about using a GNU/Linux system This package contains GNU/Linux manual pages for these sections: 4 = Devices (e.g. hd, sd). 5 = File formats and protocols, syntaxes of several system files (e.g. wtmp, /etc/passwd, nfs). 7 = Conventions and standards, macro packages, etc. (e.g. nroff, ascii). . Beside the intro man page describing the section, a few manual pages from sections 1,6 and 8 are also provided. . The man pages describe syntaxes of several system files. Homepage: https://www.kernel.org/doc/man-pages/ Package: mariadb-common Status: install ok installed Priority: optional Section: database Installed-Size: 67 Maintainer: Debian MySQL Maintainers Architecture: all Multi-Arch: foreign Source: mariadb Version: 1:10.11.14-0+deb12u2 Depends: mysql-common (>= 5.6.25) Conffiles: /etc/mysql/mariadb.cnf f78499dd07dccc3238cc15dd937b87bb Description: MariaDB common configuration files MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. . This package includes configuration files common to all MariaDB programs. Homepage: https://mariadb.org/ Package: mawk Status: install ok installed Priority: required Section: interpreters Installed-Size: 263 Maintainer: Boyuan Yang Architecture: amd64 Multi-Arch: foreign Version: 1.3.4.20200120-3.1 Provides: awk Depends: libc6 (>= 2.29) Description: Pattern scanning and text processing language Mawk is an interpreter for the AWK Programming Language. The AWK language is useful for manipulation of data files, text retrieval and processing, and for prototyping and experimenting with algorithms. Mawk is a new awk meaning it implements the AWK language as defined in Aho, Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms to the POSIX 1003.2 (draft 11.3) definition of the AWK language which contains a few features not described in the AWK book, and mawk provides a small number of extensions. . Mawk is smaller and much faster than gawk. It has some compile-time limits such as NF = 32767 and sprintf buffer = 1020. Homepage: https://invisible-island.net/mawk/ Package: mdadm Status: install ok installed Priority: optional Section: admin Installed-Size: 1236 Maintainer: Daniel Baumann Architecture: amd64 Version: 4.2-5 Depends: debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libudev1 (>= 183), debconf, lsb-base, udev Pre-Depends: init-system-helpers (>= 1.54~) Recommends: default-mta | mail-transport-agent, kmod | module-init-tools Suggests: dracut-core Conffiles: /etc/cron.d/mdadm e2384a232bdaaf9ec65173d5282e40fe /etc/cron.daily/mdadm 487494f679bd1417e85336baf93aa890 /etc/init.d/mdadm efc6265fbfed68898f122344143747f9 /etc/init.d/mdadm-waitidle 0d575d4210d6927d4f674ec7c2abbd30 /etc/logcheck/ignore.d.server/mdadm 5eeaf5c5c7dc0291a986e43004dfd495 /etc/logcheck/violations.d/mdadm efd87cec251921ce0642171eae5f3b73 /etc/modprobe.d/mdadm.conf d3be82c0f275d6c25b04d388baf9e836 Description: Tool to administer Linux MD arrays (software RAID) The mdadm utility can be used to create, manage, and monitor MD (multi-disk) arrays for software RAID or multipath I/O. . This package automatically configures mdadm to assemble arrays during the system startup process. If not needed, this functionality can be disabled. Homepage: https://raid.wiki.kernel.org/index.php/Linux_Raid Package: media-types Status: install ok installed Priority: standard Section: net Installed-Size: 92 Maintainer: Mime-Support Packagers Architecture: all Multi-Arch: foreign Version: 10.0.0 Replaces: mime-support (<< 3.65) Breaks: mime-support (<< 3.65) Conffiles: /etc/mime.types e8937e06f21a0edb49813f91567be8e6 Description: List of standard media types and their usual file extension This package installs the configuration file /etc/mime.types, that lists standard media types (originally known as "MIME" types) and their usual file extension. This provides a simple way for programs to have a first guess at a file's content. On standard Debian desktop systems, one will also find more sophisticated tools, for instance provided by the "file" and "xdg-utils" packages. . The /etc/mime.types file is compiled by hand using mostly information provided by the Internet Assigned Numbers Authority (IANA). Package: memcached Status: install ok installed Priority: optional Section: web Installed-Size: 597 Maintainer: Chris Lamb Architecture: amd64 Version: 1.6.18-1 Depends: adduser, lsb-base, perl, perl:any, libc6 (>= 2.34), libevent-2.1-7 (>= 2.1.8-stable), libsasl2-2 (>= 2.1.28+dfsg), libssl3 (>= 3.0.0) Pre-Depends: init-system-helpers (>= 1.54~) Suggests: libanyevent-perl, libcache-memcached-perl, libmemcached, libterm-readkey-perl, libyaml-perl Conffiles: /etc/default/memcached 58efa3a45665c4aa98575579f2bca8ac /etc/init.d/memcached 5b482b1057c0d2951e55592712aef784 Description: High-performance in-memory object caching system Danga Interactive developed memcached to enhance the speed of LiveJournal.com, a site which was already doing 20 million+ dynamic page views per day for 1 million users with a bunch of webservers and a bunch of database servers. memcached dropped the database load to almost nothing, yielding faster page load times for users, better resource utilization, and faster access to the databases on a memcache miss. . memcached optimizes specific high-load serving applications that are designed to take advantage of its versatile no-locking memory access system. Clients are available in several different programming languages, to suit the needs of the specific application. Traditionally this has been used in mod_perl apps to avoid storing large chunks of data in Apache memory, and to share this burden across several machines. Homepage: https://memcached.org/ Package: mime-support Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 17 Maintainer: Mime-Support Packagers Architecture: all Multi-Arch: foreign Version: 3.66 Depends: mailcap, media-types Description: transitional package This is a transitional package. It will be possible to remove it safely once its dependency chain has adjusted to depend on mailcap or media-types directly. Package: mktorrent Status: install ok installed Priority: optional Section: net Installed-Size: 48 Maintainer: Paride Legovini Architecture: amd64 Multi-Arch: foreign Version: 1.1-3 Depends: libc6 (>= 2.33), libssl3 (>= 3.0.0) Description: simple command line utility to create BitTorrent metainfo files mktorrent is a text-based utility to create BitTorrent metainfo files used by trackers and torrent clients. It can create metainfo files for single files or complete directories in a fast way. . It supports: - multiple trackers, - embedding custom comments into torrent files, - multi-threaded hashing. . It also supports setting the "private" flag, which advises the BitTorrent agents to refrain from using alternative peer discovery mechanisms, such as Distributed Hash Table (DHT), Local Peer Discovery (LPD), or Peer Exchange. Homepage: https://github.com/pobrn/mktorrent Package: mokutil Status: install ok installed Priority: optional Section: admin Installed-Size: 80 Maintainer: Debian UEFI Maintainers Architecture: amd64 Version: 0.6.0-2 Depends: libc6 (>= 2.33), libcrypt1 (>= 1:4.1.0), libefivar1 (>= 37), libkeyutils1 (>= 1.5.9), libssl3 (>= 3.0.0) Description: tools for manipulating machine owner keys This program provides the means to enroll and erase the machine owner keys (MOK) stored in the database of shim. Package: mount Status: install ok installed Priority: required Section: admin Installed-Size: 393 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: foreign Source: util-linux Version: 2.38.1-5+deb12u3 Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libmount1 (>= 2.38), libselinux1 (>= 3.1~), libsmartcols1 (>= 2.33) Suggests: nfs-common Description: tools for mounting and manipulating filesystems This package provides the mount(8), umount(8), swapon(8), swapoff(8), and losetup(8) commands. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: mtr-tiny Status: install ok installed Priority: optional Section: net Installed-Size: 161 Maintainer: Robert Woodcock Architecture: amd64 Source: mtr Version: 0.95-1 Replaces: mtr Depends: libc6 (>= 2.33), libjansson4 (>= 2.0.1), libncurses6 (>= 6), libtinfo6 (>= 6) Breaks: mtr, suidmanager (<< 0.50) Description: Full screen ncurses traceroute tool mtr combines the functionality of the 'traceroute' and 'ping' programs in a single network diagnostic tool. . As mtr starts, it investigates the network connection between the host mtr runs on and a user-specified destination host. After it determines the address of each network hop between the machines, it sends a sequence of ICMP ECHO requests to each one to determine the quality of the link to each machine. As it does this, it prints running statistics about each machine. . mtr-tiny is compiled without support for X and conserves disk space. Homepage: https://www.bitwizard.nl/mtr/ Package: mumble-server Status: install ok installed Priority: optional Section: sound Installed-Size: 3081 Maintainer: Christopher Knadle Architecture: amd64 Source: mumble Version: 1.3.4-4 Depends: libavahi-compat-libdnssd1 (>= 0.6.16), libc6 (>= 2.34), libcap2 (>= 1:2.10), libgcc-s1 (>= 3.0), libprotobuf32 (>= 3.21.12), libqt5core5a (>= 5.15.1), libqt5dbus5 (>= 5.14.1), libqt5network5 (>= 5.14.1), libqt5sql5 (>= 5.0.2), libqt5xml5 (>= 5.0.2), libssl3 (>= 3.0.0), libstdc++6 (>= 11), libzeroc-ice3.7, debconf (>= 0.5) | debconf-2.0, adduser, libqt5sql5-sqlite, lsb-base (>= 3.0-6) Conffiles: /etc/dbus-1/system.d/mumble-server.conf aa56659bfd9f8751c9ce097e58d2e055 /etc/default/mumble-server c34fb7c6a1ef3315e41ae84561a4e4d9 /etc/init.d/mumble-server 4ae1ba9fbe0e49a500774cb9f0767cc5 /etc/logrotate.d/mumble-server 4dc528c0e9ab8aab6b1675f1177dab70 /etc/mumble-server.ini 4d1567151a3fbd58be92cef1e061cd13 Description: Low latency encrypted VoIP server Murmur is the VoIP server component for Mumble. Murmur is installed in a system-wide fashion, but can also be run by individual users. Each murmur process supports multiple virtual servers, each with their own user base and channel list. Homepage: https://www.mumble.info Package: mysql-common Status: install ok installed Priority: optional Section: database Installed-Size: 33 Maintainer: Debian MySQL Maintainers Architecture: all Multi-Arch: foreign Source: mysql-defaults (1.1.0) Version: 5.8+1.1.0 Replaces: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5 Provides: mysql-common-5.6 Breaks: mariadb-common (<< 10.0.20-3~) Conflicts: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5 Conffiles: /etc/mysql/conf.d/mysql.cnf 61e0993270966cc6bc96b46c01ade21f /etc/mysql/conf.d/mysqldump.cnf 20890decb4486ce539753193908fb356 /etc/mysql/my.cnf.fallback cfe2bc1819d5e200eca8ca6912f714af Description: MySQL database common files, e.g. /etc/mysql/my.cnf MySQL is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MySQL are speed, robustness and ease of use. . This package includes files needed by all versions of the client library, e.g. /etc/mysql/my.cnf. Package: nano Status: install ok installed Priority: important Section: editors Installed-Size: 2804 Maintainer: Jordi Mallach Architecture: amd64 Version: 7.2-1+deb12u1 Replaces: nano-tiny (<< 2.8.6-2), pico Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libtinfo6 (>= 6) Suggests: hunspell Breaks: nano-tiny (<< 2.8.6-2) Conflicts: pico Conffiles: /etc/nanorc be076483dde4364946fcf3d1ea5dce26 Description: small, friendly text editor inspired by Pico GNU nano is an easy-to-use text editor originally designed as a replacement for Pico, the ncurses-based editor from the non-free mailer package Pine (itself now available under the Apache License as Alpine). . However, GNU nano also implements many features missing in Pico, including: - undo/redo - line numbering - syntax coloring - soft-wrapping of overlong lines - selecting text by holding Shift - interactive search and replace (with regular expression support) - a go-to line (and column) command - support for multiple file buffers - auto-indentation - tab completion of filenames and search terms - toggling features while running - and full internationalization support Homepage: https://www.nano-editor.org/ Package: ncdu Status: install ok installed Priority: optional Section: admin Installed-Size: 113 Maintainer: Eugene V. Lyubimkin Architecture: amd64 Version: 1.18-0.2 Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libtinfo6 (>= 6) Description: ncurses disk usage viewer Ncdu is a ncurses-based du viewer. It provides a fast and easy-to-use interface through famous du utility. It allows one to browse through the directories and show percentages of disk usage with ncurses library. Homepage: https://dev.yorhel.nl/ncdu/ Package: ncurses-base Essential: yes Status: install ok installed Priority: required Section: misc Installed-Size: 379 Maintainer: Craig Small Architecture: all Multi-Arch: foreign Source: ncurses Version: 6.4-4 Provides: ncurses-runtime Breaks: bash-static (<< 4.4.18-1.1), libmono-corlib4.5-cil (<< 4.6.2.7+dfsg-2), libslang2 (<< 2.3.1a-3), libtinfo5 (<< 6.1), libunibilium0 (<< 2), libunibilium4 (<< 2.0.0-3), neovim (<< 0.6.0), vim-common (<< 2:9.0.1000-2), zsh-static (<< 5.4.2-4) Conffiles: /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171 Description: basic terminal type definitions The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains terminfo data files to support the most common types of terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220, vt52, and xterm. Homepage: https://invisible-island.net/ncurses/ Package: ncurses-bin Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 636 Maintainer: Craig Small Architecture: amd64 Multi-Arch: foreign Source: ncurses Version: 6.4-4 Pre-Depends: libc6 (>= 2.34), libtinfo6 (>= 6.3) Description: terminal-related programs and man pages The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the programs used for manipulating the terminfo database and individual terminfo entries, as well as some programs for resetting terminals and such. Homepage: https://invisible-island.net/ncurses/ Package: ncurses-term Status: install ok installed Priority: standard Section: misc Installed-Size: 4289 Maintainer: Craig Small Architecture: all Multi-Arch: foreign Source: ncurses Version: 6.4-4 Replaces: alacritty (<< 0.3.4~), dvtm (<< 0.15-3), jfbterm (<< 0.4.7-10), kon2 (<< 0.3.9b-21), libiterm1 (<< 0.5-9), tn5250 (<< 0.17.4-3) Depends: ncurses-base (>= 6.1+20190713) Breaks: bash-static (<< 4.4.18-1.1), dvtm (<< 0.15-3), libmono-corlib4.5-cil (<< 4.6.2.7+dfsg-2), libslang2 (<< 2.3.1a-3), libtinfo5 (<< 6.1), libunibilium0 (<< 2), libunibilium4 (<< 2.0.0-3), vim-common (<< 2:9.0.1000-2), zsh-static (<< 5.4.2-4) Description: additional terminal type definitions The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains all of the numerous terminal definitions not found in the ncurses-base package. Homepage: https://invisible-island.net/ncurses/ Package: neofetch Status: install ok installed Priority: optional Section: utils Installed-Size: 352 Maintainer: Nobuhiro Iwamatsu Architecture: all Multi-Arch: foreign Version: 7.1.0-4 Recommends: chafa, caca-utils, imagemagick, jp2a, libsixel-bin, w3m-img, pciutils Description: Shows Linux System Information with Distribution Logo Neofetch is a cross-platform and easy-to-use system information command line script that collects your Linux system information and display it on the terminal next to an image, it could be your distributions logo or any ascii art of your choice. Homepage: https://github.com/dylanaraps/neofetch Package: neovim Status: install ok installed Priority: optional Section: editors Installed-Size: 4680 Maintainer: Debian Vim Maintainers Architecture: amd64 Version: 0.7.2-7 Provides: editor Depends: neovim-runtime (= 0.7.2-7), libc6 (>= 2.34), libluajit-5.1-2 (>= 2.0.4+dfsg) | libluajit2-5.1-2 (>= 2.1~), libmsgpackc2 (>= 2.1.0), libtermkey1 (>= 0.19), libtree-sitter0 (>= 0.20.2), libunibilium4 (>= 2.0), libuv1 (>= 1.30.1), libvterm0 (>= 0.1), lua-luv (>= 1.44.2-0) Recommends: python3-pynvim, xclip | xsel | wl-clipboard, xxd Suggests: ctags, vim-scripts Description: heavily refactored vim fork Neovim is a fork of Vim focused on modern code and features, rather than running in legacy environments. . msgpack API enables structured communication to/from any programming language. Remote plugins run as co-processes that communicate with Neovim safely and asynchronously. . GUIs (or TUIs) can easily embed Neovim or communicate via TCP sockets using the discoverable msgpack API. Homepage: https://neovim.io/ Package: neovim-runtime Status: install ok installed Priority: optional Section: editors Installed-Size: 20066 Maintainer: Debian Vim Maintainers Architecture: all Multi-Arch: foreign Source: neovim Version: 0.7.2-7 Description: heavily refactored vim fork (runtime files) Neovim is a fork of Vim focused on modern code and features, rather than running in legacy environments. . This package contains the architecture independent runtime files used by neovim. Examples of such files are: documentation, rules for language-specific highlighting and indentation, color schemes, and standard plugins. Homepage: https://neovim.io/ Package: net-tools Status: install ok installed Priority: important Section: net Installed-Size: 978 Maintainer: net-tools Team Architecture: amd64 Multi-Arch: foreign Version: 2.10-0.1+deb12u2 Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~) Description: NET-3 networking toolkit This package includes the important tools for controlling the network subsystem of the Linux kernel. This includes arp, ifconfig, netstat, rarp, nameif and route. Additionally, this package contains utilities relating to particular network hardware types (plipconfig, slattach, mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr). . In the upstream package 'hostname' and friends are included. Those are not installed by this package, since there is a special "hostname*.deb". Homepage: http://sourceforge.net/projects/net-tools/ Package: netbase Status: install ok installed Priority: important Section: admin Installed-Size: 36 Maintainer: Marco d'Itri Architecture: all Multi-Arch: foreign Version: 6.4 Replaces: ebtables (<< 2.0.11-2) Breaks: ebtables (<< 2.0.11-2) Conffiles: /etc/ethertypes cd7fa874d85f7587e2ed11174d58cf83 /etc/protocols 0c247591a720f534fe543401bd4844d6 /etc/rpc 2d7748cd0feba2e43ee52d4d7f834188 /etc/services 3975f0d8c4e1ecb25f035edfb1ba27ac Description: Basic TCP/IP networking system This package provides the necessary infrastructure for basic TCP/IP based networking. . In particular, it supplies common name-to-number mappings in /etc/services, /etc/rpc, /etc/protocols and /etc/ethertypes. Package: netcat-traditional Status: install ok installed Priority: optional Section: net Installed-Size: 143 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Source: netcat Version: 1.10-47 Provides: netcat Depends: libc6 (>= 2.15) Description: TCP/IP swiss army knife A simple Unix utility which reads and writes data across network connections using TCP or UDP protocol. It is designed to be a reliable "back-end" tool that can be used directly or easily driven by other programs and scripts. At the same time it is a feature-rich network debugging and exploration tool, since it can create almost any kind of connection you would need and has several interesting built-in capabilities. . This is the "classic" netcat, written by *Hobbit*. It lacks many features found in netcat-openbsd. Homepage: http://www.stearns.org/nc/ Package: nftables Status: install ok installed Priority: important Section: net Installed-Size: 176 Maintainer: Debian Netfilter Packaging Team Architecture: amd64 Version: 1.0.6-2+deb12u2 Depends: libnftables1 (= 1.0.6-2+deb12u2), libc6 (>= 2.34), libedit2 (>= 3.1-20130611-0) Recommends: netbase Suggests: firewalld Conffiles: /etc/nftables.conf 4d4241fcd44b9a69b74f69d571f35a20 Description: Program to control packet filtering rules by Netfilter project This software provides an in-kernel packet classification framework that is based on a network-specific Virtual Machine (VM) and the nft userspace command line tool. The nftables framework reuses the existing Netfilter subsystems such as the existing hook infrastructure, the connection tracking system, NAT, userspace queueing and logging subsystem. . nftables replaces the old popular iptables, ip6tables, arptables and ebtables. . Netfilter software and nftables in particular are used in applications such as Internet connection sharing, firewalls, IP accounting, transparent proxying, advanced routing and traffic control. . A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended. Homepage: https://www.netfilter.org/ Package: nginx Status: install ok installed Priority: optional Section: httpd Installed-Size: 1331 Maintainer: Debian Nginx Maintainers Architecture: amd64 Version: 1.22.1-9+deb12u8 Replaces: nginx-core (<< 1.22.1-6~), nginx-extras (<< 1.22.1-6~), nginx-light (<< 1.22.1-6~) Provides: httpd, httpd-cgi, nginx-abi-1.22.1-7 Depends: libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libpcre2-8-0 (>= 10.22), libssl3 (>= 3.0.0), zlib1g (>= 1:1.1.4), iproute2, nginx-common (<< 1.22.1-9+deb12u8.1~), nginx-common (>= 1.22.1-9+deb12u8) Breaks: nginx-core (<< 1.22.1-6~), nginx-extras (<< 1.22.1-6~), nginx-light (<< 1.22.1-6~) Description: small, powerful, scalable web/proxy server Nginx ("engine X") is a high-performance web and reverse proxy server created by Igor Sysoev. It can be used both as a standalone web server and as a proxy to reduce the load on back-end HTTP or mail servers. Homepage: https://nginx.org Package: nginx-common Status: install ok installed Priority: optional Section: httpd Installed-Size: 332 Maintainer: Debian Nginx Maintainers Architecture: all Multi-Arch: foreign Source: nginx Version: 1.22.1-9+deb12u8 Replaces: nginx (<< 1.22.1-8) Depends: debconf (>= 0.5) | debconf-2.0 Suggests: fcgiwrap, nginx-doc, ssl-cert Breaks: nginx (<< 1.22.1-8) Conffiles: /etc/default/nginx 596fbc1f5712caaa02e8c799a4e2a01f /etc/init.d/nginx 290f6f12a12bc8e882bc5af46c1bfe7c /etc/logrotate.d/nginx b29112f9480a70fa7de2729ff39923e2 /etc/nginx/fastcgi.conf 74e91892a9e591cde6d65c3e8e7e5fb2 /etc/nginx/fastcgi_params d4fe70d397348c37f086219021ac9b0d /etc/nginx/koi-utf 3e338aca6a53a5420fc791b5ef86f64c /etc/nginx/koi-win bfa0b80381fed2b1dfcf617b0ba204ec /etc/nginx/mime.types 60d17ef2cb190ea97b74947b5d1a0ad6 /etc/nginx/nginx.conf e5398edc0b51497dba606859fb13a86e /etc/nginx/proxy_params f981a958660df0c24906c5260d7e401c /etc/nginx/scgi_params 550f60006b87f280d3a1340396240d39 /etc/nginx/sites-available/default f1f26aef86f90a484f3a2f46ccc46ff6 /etc/nginx/snippets/fastcgi-php.conf 828e5bd1f3de7b3ef0e6856598b2a8c0 /etc/nginx/snippets/snakeoil.conf 0a8bff8a55d8ec9d002e1b8460d2d64f /etc/nginx/uwsgi_params 0913e8f60373cfe818bc7402d4d5126d /etc/nginx/win-utf 0f39cbfca77d4f3bb5d33f009a514c71 /etc/ufw/applications.d/nginx 3e24def79cf627acc2ab1b1bdfbc645c Description: small, powerful, scalable web/proxy server - common files Nginx ("engine X") is a high-performance web and reverse proxy server created by Igor Sysoev. It can be used both as a standalone web server and as a proxy to reduce the load on back-end HTTP or mail servers. . This package contains base configuration files used by all versions of nginx. Homepage: https://nginx.org Package: nginx-extras Status: install ok installed Priority: optional Section: httpd Installed-Size: 92 Maintainer: Debian Nginx Maintainers Architecture: amd64 Source: nginx Version: 1.22.1-9+deb12u8 Depends: nginx (= 1.22.1-9+deb12u8), libnginx-mod-http-geoip (= 1.22.1-9+deb12u8), libnginx-mod-http-image-filter (= 1.22.1-9+deb12u8), libnginx-mod-http-perl (= 1.22.1-9+deb12u8), libnginx-mod-http-xslt-filter (= 1.22.1-9+deb12u8), libnginx-mod-mail (= 1.22.1-9+deb12u8), libnginx-mod-stream (= 1.22.1-9+deb12u8), libnginx-mod-stream-geoip (= 1.22.1-9+deb12u8), libnginx-mod-http-auth-pam (>= 1:1.5.3-3~), libnginx-mod-http-cache-purge (>= 1:2.3-4~), libnginx-mod-http-dav-ext (>= 1:3.0.0-3~), libnginx-mod-http-echo (>= 1:0.63-4~), libnginx-mod-http-fancyindex (>= 1:0.5.2-3~), libnginx-mod-http-geoip2 (>= 1:3.4-3~), libnginx-mod-http-headers-more-filter (>= 1:0.34-3~), libnginx-mod-http-lua (>= 1:0.10.23-1~), libnginx-mod-http-subs-filter (>= 1:0.6.4-4~), libnginx-mod-http-uploadprogress (>= 1:0.9.2-3~), libnginx-mod-http-upstream-fair (>= 1:0.0~git20120408.a18b409-3~), libnginx-mod-nchan (>= 1:1.3.6+dfsg-2~), libnginx-mod-stream-geoip2 (>= 1:3.4-3~) Description: nginx web/proxy server (extended version) Nginx ("engine X") is a high-performance web and reverse proxy server created by Igor Sysoev. It can be used both as a standalone web server and as a proxy to reduce the load on back-end HTTP or mail servers. . This metapackage provides a version of nginx with the standard modules, plus extra features and modules such as the Perl module, which allows the addition of Perl in configuration files. . STANDARD HTTP MODULES: Core, Access, Auth Basic, Auto Index, Browser, Empty GIF, FastCGI, Geo, Limit Connections, Limit Requests, Map, Memcached, Proxy, Referer, Rewrite, SCGI, Split Clients, UWSGI. . OPTIONAL HTTP MODULES: Addition, Auth Request, Charset, WebDAV, FLV, GeoIP, Gunzip, Gzip, Gzip Precompression, Headers, HTTP/2, Image Filter, Index, Log, MP4, Embedded Perl, Random Index, Real IP, Slice, Secure Link, SSI, SSL, SSL Preread, Stub Status, Substitution, Thread Pool, Upstream, User ID, XSLT. . OPTIONAL MAIL MODULES: Mail Core, Auth HTTP, Proxy, SSL, IMAP, POP3, SMTP. . OPTIONAL STREAM MODULES: Stream, GeoIP, GeoIP2 . THIRD PARTY MODULES: Auth PAM, Cache Purge, DAV Ext, Echo, Fancy Index, GeoIP2, Headers More, Embedded Lua, HTTP Substitutions, Nchan, Upload Progress, Upstream Fair Queue. Homepage: https://nginx.org Package: nmap Status: install ok installed Priority: optional Section: net Installed-Size: 4434 Maintainer: Debian Security Tools Architecture: amd64 Version: 7.93+dfsg1-1 Depends: nmap-common (= 7.93+dfsg1-1), libc6 (>= 2.34), libgcc-s1 (>= 3.0), liblinear4 (>= 2.01+dfsg), liblua5.3-0, libpcap0.8 (>= 1.5.1), libpcre3, libssh2-1 (>= 1.2.9), libssl3 (>= 3.0.0), libstdc++6 (>= 11), lua-lpeg (>= 1.0.2), zlib1g (>= 1:1.1.4) Suggests: ncat, ndiff, zenmap Description: The Network Mapper Nmap is a utility for network exploration or security auditing. It supports ping scanning (determine which hosts are up), many port scanning techniques, version detection (determine service protocols and application versions listening behind ports), and TCP/IP fingerprinting (remote host OS or device identification). Nmap also offers flexible target and port specification, decoy/stealth scanning, sunRPC scanning, and more. Most Unix and Windows platforms are supported in both GUI and commandline modes. Several popular handheld devices are also supported, including the Sharp Zaurus and the iPAQ. Homepage: https://nmap.org/ Package: nmap-common Status: install ok installed Priority: optional Section: net Installed-Size: 21188 Maintainer: Debian Security Tools Architecture: all Multi-Arch: foreign Source: nmap Version: 7.93+dfsg1-1 Recommends: nmap Description: Architecture independent files for nmap Nmap is a utility for network exploration or security auditing. It supports ping scanning (determine which hosts are up), many port scanning techniques, version detection (determine service protocols and application versions listening behind ports), and TCP/IP fingerprinting (remote host OS or device identification). Nmap also offers flexible target and port specification, decoy/stealth scanning, sunRPC scanning, and more. Most Unix and Windows platforms are supported in both GUI and commandline modes. Several popular handheld devices are also supported, including the Sharp Zaurus and the iPAQ. . This package contains the nmap files shared by all architectures. Homepage: https://nmap.org/ Package: node-esprima Status: install ok config-files Priority: optional Section: javascript Installed-Size: 477 Maintainer: Debian Javascript Maintainers Architecture: all Multi-Arch: foreign Version: 4.0.1+ds+~4.0.3-2 Config-Version: 4.0.1+ds+~4.0.3-2 Provides: libjs-esprima (= 4.0.1+ds+~4.0.3-2), node-types-esprima (= 4.0.3) Depends: nodejs:any Suggests: javascript-common Breaks: node-escodegen (<< 1.14.1+dfsg-2~) Description: ECMAScript parsing infrastructure for multipurpose analysis Esprima is a high-performance and standard-compliant parser for ECMAScript written in ECMAScript. . Node.js is an event-based server-side JavaScript engine. Homepage: https://esprima.org Package: node-mime Status: install ok config-files Priority: optional Section: javascript Installed-Size: 269 Maintainer: Debian Javascript Maintainers Architecture: all Multi-Arch: foreign Version: 3.0.0+dfsg+~cs3.97.1-1 Config-Version: 3.0.0+dfsg+~cs3.97.1-1 Provides: node-mime-db (= 1.52.0), node-mime-score (= 1.2.0), node-types-mime-db (= 1.43.1) Depends: nodejs:any Description: library for mime-type mapping for Node.js mime is a Node.js library for mime-type mapping. . A comprehensive, compact MIME type module. . Node.js is an event-based server-side javascript engine. Homepage: https://github.com/broofa/node-mime Package: node-source-map Status: install ok config-files Priority: optional Section: javascript Installed-Size: 247 Maintainer: Debian Javascript Maintainers Architecture: all Multi-Arch: foreign Version: 0.7.0++dfsg2+really.0.6.1-15 Config-Version: 0.7.0++dfsg2+really.0.6.1-15 Provides: node-types-source-map (= 0.7.0++dfsg2+really.0.6.1-15) Depends: libjs-source-map (= 0.7.0++dfsg2+really.0.6.1-15) Description: Mozilla source map generator and consumer - Node.js module Mozilla implementation of source map generator and consumer, for source maps written in the Asynchronous Module Definition format. . Source maps provide a language-agnostic way to compile back production code to the original source code. . Node.js is an event-based server-side JavaScript engine. Homepage: https://github.com/mozilla/source-map Package: node-sprintf-js Status: install ok config-files Priority: optional Section: javascript Installed-Size: 29 Maintainer: Debian Javascript Maintainers Architecture: all Version: 1.1.2+ds1+~1.1.2-1 Config-Version: 1.1.2+ds1+~1.1.2-1 Provides: node-types-sprintf-js Depends: libjs-sprintf-js (= 1.1.2+ds1+~1.1.2-1) Description: Node.js Pure JavaScript sprintf implementation node-sprintf-js is a javascript implementation of C sprintf (3). This function composes a string with the same text that would be printed if format was used on printf, but instead of being printed, the content is stored as a string in the buffer pointed by a str argument. . Node.js is an event-based server-side JavaScript engine. Homepage: https://github.com/alexei/sprintf.js Package: node-undici Status: install ok config-files Priority: optional Section: javascript Installed-Size: 1484 Maintainer: Debian Javascript Maintainers Architecture: all Multi-Arch: foreign Version: 5.15.0+dfsg1+~cs20.10.9.3-1+deb12u4 Config-Version: 5.15.0+dfsg1+~cs20.10.9.3-1+deb12u4 Provides: node-binary-search (= 1.3.6), node-undici-types (= 5.15.0) Depends: node-busboy Description: Node.js HTTP/1.1 client undici provides the Node.js core HTTP client, using WebAssembly to achieve performance and pluggability. It brings features like: - redirect support - native mocking layer using MockAgent - Client, Pool, Agent are unified by a Dispatcher API Homepage: https://undici.nodejs.org Package: nodejs Status: install ok installed Priority: optional Section: web Installed-Size: 192105 Maintainer: NodeSource Support Architecture: amd64 Version: 20.19.5-1nodesource1 Replaces: nodejs-dev (<= 0.8.22), nodejs-legacy, npm (<= 1.2.14) Provides: nodejs-dev, nodejs-doc, nodejs-legacy, npm Depends: libc6 (>= 2.28), libgcc1 (>= 1:3.4), libstdc++6 (>= 5.2), python3, ca-certificates Conflicts: nodejs-dev, nodejs-doc, nodejs-legacy, npm Description: Node.js event-based server-side javascript engine Node.js is similar in design to and influenced by systems like Ruby's Event Machine or Python's Twisted. . It takes the event model a bit further - it presents the event loop as a language construct instead of as a library. . Node.js is bundled with several useful libraries to handle server tasks : System, Events, Standard I/O, Modules, Timers, Child Processes, POSIX, HTTP, Multipart Parsing, TCP, DNS, Assert, Path, URL, Query Strings. Homepage: https://nodejs.org Package: npm Status: install ok config-files Priority: optional Section: javascript Installed-Size: 2941 Maintainer: Debian Javascript Maintainers Architecture: all Version: 9.2.0~ds1-1 Config-Version: 9.2.0~ds1-1 Provides: arborist (= 6.1.5), node-libnpmaccess (= 7.0.1), node-libnpmdiff (= 5.0.6), node-libnpmexec (= 5.0.6), node-libnpmfund (= 4.0.6), node-libnpmhook (= 9.0.1), node-libnpmorg (= 5.0.1), node-libnpmpack (= 5.0.6), node-libnpmpublish (= 7.0.6), node-libnpmsearch (= 6.0.1), node-libnpmteam (= 5.0.1), node-libnpmversion (= 4.0.1), node-npm (= 9.2.0), node-npm-packlist (= 7.0.4), node-npmcli-arborist (= 6.1.5), node-npmcli-config (= 6.1.0), node-npmcli-disparity-colors (= 3.0.0), node-npmcli-git (= 4.0.3), node-npmcli-installed-package-contents (= 2.0.1), node-npmcli-map-workspaces (= 3.0.0), node-npmcli-metavuln-calculator (= 5.0.0), node-npmcli-mock-registry (= 1.0.0), node-npmcli-name-from-folder (= 1.0.1), node-npmcli-node-gyp (= 3.0.0), node-npmcli-package-json (= 3.0.0), node-npmcli-promise-spawn (= 6.0.1), node-npmcli-query (= 3.0.0), node-npmcli-run-script (= 6.0.0), node-npmcli-smoke-tests (= 1.0.0), node-pacote (= 15.0.7), node-qrcode-terminal (= 0.12.0), pacote (= 15.0.7), qrcode-terminal (= 0.12.0) Depends: ca-certificates, node-abbrev, node-agent-base, node-aproba, node-archy, node-base64-js, node-binary-extensions, node-cacache (>= 17), node-chalk (>= 5.1.2-2~), node-chownr, node-ci-info, node-cli-table3, node-colors, node-columnify, node-cssesc, node-debug, node-depd, node-diff, node-emoji-regex, node-encoding, node-events, node-glob, node-got, node-graceful-fs, node-gyp, node-hosted-git-info (>= 6), node-http-proxy-agent, node-https-proxy-agent, node-ieee754, node-ini, node-ip, node-ip-regex, node-json-parse-better-errors, node-jsonparse, node-lru-cache, node-minimatch, node-minipass, node-mkdirp, node-ms, node-negotiator, node-nopt, node-normalize-package-data, node-npm-bundled, node-npm-normalize-package-bin, node-npm-package-arg (>= 10), node-npmlog, node-once, node-p-map, node-postcss-selector-parser, node-promise-retry, node-promzard, node-read, node-read-package-json, node-rimraf, node-semver, node-ssri, node-string-width, node-strip-ansi, node-tar, node-text-table, node-validate-npm-package-license, node-validate-npm-package-name, node-which, node-wrappy, node-write-file-atomic, node-yallist, nodejs:any Recommends: git, node-tap Suggests: node-opener Description: package manager for Node.js Node.js is an event-based server-side javascript engine. . npm is the package manager for the Node JavaScript platform. It puts modules in place so that node can find them, and manages dependency conflicts intelligently. . It is extremely configurable to support a wide variety of use cases. Most commonly, it is used to publish, discover, install, and develop node programs. . Install also node-opener to have full npm features enabled. Homepage: https://docs.npmjs.com/ Package: ocl-icd-libopencl1 Status: install ok installed Priority: optional Section: libs Installed-Size: 140 Maintainer: Debian OpenCL Maintainers Architecture: amd64 Multi-Arch: same Source: ocl-icd Version: 2.3.1-1 Replaces: amd-app, libopencl1, nvidia-libopencl1-dev Provides: libopencl-1.1-1, libopencl-1.2-1, libopencl-2.0-1, libopencl-2.1-1, libopencl-2.2-1, libopencl-3.0-1, libopencl1 Depends: libc6 (>= 2.34) Suggests: opencl-icd Conflicts: amd-app, libopencl1, nvidia-libopencl1-dev Description: Generic OpenCL ICD Loader OpenCL (Open Computing Language) is a multivendor open standard for general-purpose parallel programming of heterogeneous systems that include CPUs, GPUs and other processors. . This package contains an installable client driver loader (ICD Loader) library that can be used to load any (free or non-free) installable client driver (ICD) for OpenCL. It acts as a demultiplexer so several ICD can be installed and used together. Homepage: https://github.com/OCL-dev/ocl-icd Package: opendkim Status: install ok installed Priority: optional Section: mail Installed-Size: 447 Maintainer: David Bürgin Architecture: amd64 Version: 2.11.0~beta2-8+deb12u1 Depends: libopendkim11 (= 2.11.0~beta2-8+deb12u1), libbsd0 (>= 0.0), libc6 (>= 2.34), libdb5.3, libldap-2.5-0 (>= 2.5.4), liblua5.3-0, libmemcached11 (>= 1.1.4), libmilter1.0.1 (>= 8.14.1), libopendbx1 (>= 1.4.6), librbl1 (>= 2.7.2), libssl3 (>= 3.0.0), libunbound8 (>= 1.8.0), libvbr2 (>= 2.7.2), adduser, lsb-base, dns-root-data Pre-Depends: init-system-helpers (>= 1.54~) Recommends: opendkim-tools Conffiles: /etc/default/opendkim d04976c1685bce5450f217303b7edd16 /etc/dkimkeys/README.PrivateKeys 2c549002dea448b1b26e9865cb32aec2 /etc/init.d/opendkim d56132ac1519ee503a48683d7eb8f57a /etc/mail/m4/opendkim.m4 52b6f8ac75d31d74d7ae158192f7918d /etc/opendkim.conf 5ad260d06704f44102594fa2b71d2681 Description: DomainKeys Identified Mail (DKIM) signing and verifying milter The OpenDKIM Project is a community effort to develop and maintain a C library for producing DKIM-aware applications and an open source milter for providing DomainKeys Identified Mail (DKIM) service. . DKIM provides a way for senders to confirm their identity when sending email by adding a cryptographic signature to the headers of the message. . This package contains the OpenDKIM mail filter (Milter) for plugging into Milter-aware MTAs. It implements both signing and verification. Homepage: http://www.opendkim.org/ Package: opendkim-tools Status: install ok installed Priority: optional Section: mail Installed-Size: 455 Maintainer: David Bürgin Architecture: amd64 Source: opendkim Version: 2.11.0~beta2-8+deb12u1 Replaces: opendkim (<< 2.5.2+dfsg-2~) Depends: libbsd0 (>= 0.0), libc6 (>= 2.34), libdb5.3, libldap-2.5-0 (>= 2.5.4), liblua5.3-0, libmemcached11 (>= 1.1.4), libopendbx1 (>= 1.4.6), libopendkim11 (>= 2.11.0~alpha), librbl1 (>= 2.7.2), libssl3 (>= 3.0.0), libunbound8 (>= 1.8.0), libvbr2 (>= 2.7.2), perl:any Breaks: opendkim (<< 2.5.2+dfsg-2~) Description: utilities for administering the OpenDKIM milter The OpenDKIM Project is a community effort to develop and maintain a C library for producing DKIM-aware applications and an open source milter for providing DomainKeys Identified Mail (DKIM) service. . This package contains command line tools for the OpenDKIM mail filter (Milter). The following tools are included: - opendkim-genkey - opendkim-genzone - opendkim-atpszone - opendkim-testkey - opendkim-testmsg - opendkim-spam - opendkim-stats - opendkim-gengraphs - opendkim-genstats - opendkim-importstats - opendkim-expire Homepage: http://www.opendkim.org/ Package: openssh-client Status: install ok installed Priority: standard Section: net Installed-Size: 5801 Maintainer: Debian OpenSSH Maintainers Architecture: amd64 Multi-Arch: foreign Source: openssh Version: 1:9.2p1-2+deb12u10 Replaces: openssh-sk-helper, ssh, ssh-krb5 Provides: ssh-client Depends: adduser, passwd, libc6 (>= 2.36), libedit2 (>= 2.11-20080614-0), libfido2-1 (>= 1.8.0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl3 (>= 3.0.19), zlib1g (>= 1:1.1.4) Recommends: xauth Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass Breaks: openssh-sk-helper Conflicts: sftp Conffiles: /etc/ssh/ssh_config 8a5bddc82befb71d8ef34cc903d3d077 Description: secure shell (SSH) client, for secure access to remote machines This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine. It provides secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. It can be used to provide applications with a secure communication channel. . This package provides the ssh, scp and sftp clients, the ssh-agent and ssh-add programs to make public key authentication more convenient, and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities. . In some countries it may be illegal to use any encryption at all without a special permit. . ssh replaces the insecure rsh, rcp and rlogin programs, which are obsolete for most purposes. Homepage: https://www.openssh.com/ Package: openssh-server Status: install ok installed Priority: optional Section: net Installed-Size: 1930 Maintainer: Debian OpenSSH Maintainers Architecture: amd64 Multi-Arch: foreign Source: openssh Version: 1:9.2p1-2+deb12u10 Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5 Provides: ssh-server Depends: adduser, libpam-modules, libpam-runtime, lsb-base, openssh-client (= 1:9.2p1-2+deb12u10), openssh-sftp-server, procps, ucf, debconf (>= 0.5) | debconf-2.0, runit-helper (>= 2.14.0~), libaudit1 (>= 1:2.2.1), libc6 (>= 2.36), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl3 (>= 3.0.19), libsystemd0, libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4) Pre-Depends: init-system-helpers (>= 1.54~) Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth Suggests: molly-guard, monkeysphere, ssh-askpass, ufw Breaks: runit (<< 2.1.2-51~) Conflicts: sftp, ssh-socks, ssh2 Conffiles: /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035 /etc/init.d/ssh 3649a6fe8c18ad1d5245fd91737de507 /etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812 /etc/ssh/moduli 1f68f6ab5e45958e61ff32297ea1c3ec /etc/sv/ssh/.meta/installed d41d8cd98f00b204e9800998ecf8427e /etc/sv/ssh/finish f5f032f6f3e569c821346294d410b636 /etc/sv/ssh/log/run 63e0ec3e1080dafc68d6d71d42b150a9 /etc/sv/ssh/run 411f69ac55d12f0c98998552846b1c78 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e Description: secure shell (SSH) server, for secure access from remote machines This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine. It provides secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. It can be used to provide applications with a secure communication channel. . This package provides the sshd server. . In some countries it may be illegal to use any encryption at all without a special permit. . sshd replaces the insecure rshd program, which is obsolete for most purposes. Homepage: https://www.openssh.com/ Package: openssh-sftp-server Status: install ok installed Priority: optional Section: net Installed-Size: 217 Maintainer: Debian OpenSSH Maintainers Architecture: amd64 Multi-Arch: foreign Source: openssh Version: 1:9.2p1-2+deb12u10 Replaces: openssh-server (<< 1:6.5p1-5) Depends: openssh-client (= 1:9.2p1-2+deb12u10), libc6 (>= 2.34) Recommends: openssh-server | ssh-server Breaks: openssh-server (<< 1:6.5p1-5) Enhances: openssh-server, ssh-server Description: secure shell (SSH) sftp server module, for SFTP access from remote machines This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine. It provides secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. It can be used to provide applications with a secure communication channel. . This package provides the SFTP server module for the SSH server. It is needed if you want to access your SSH server with SFTP. The SFTP server module also works with other SSH daemons like dropbear. . OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer protocol described in: . http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt . Newer versions of the draft will not be supported, though some features are individually implemented as extensions. Homepage: https://www.openssh.com/ Package: openssl Status: install ok installed Priority: optional Section: utils Installed-Size: 2310 Maintainer: Debian OpenSSL Team Architecture: amd64 Multi-Arch: foreign Version: 3.0.20-1~deb12u2 Depends: libc6 (>= 2.34), libssl3 (>= 3.0.9) Suggests: ca-certificates Conffiles: /etc/ssl/openssl.cnf fe1993ec22f6b8a46cb9706acd8fc68f Description: Secure Sockets Layer toolkit - cryptographic utility This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It contains the general-purpose command line binary /usr/bin/openssl, useful for cryptographic operations such as: * creating RSA, DH, and DSA key parameters; * creating X.509 certificates, CSRs, and CRLs; * calculating message digests; * encrypting and decrypting with ciphers; * testing SSL/TLS clients and servers; * handling S/MIME signed or encrypted mail. Homepage: https://www.openssl.org/ Package: os-prober Status: install ok installed Priority: optional Section: utils Installed-Size: 110 Maintainer: Debian Install System Team Architecture: amd64 Version: 1.81 Depends: libc6 (>= 2.4), grub-common, mount Description: utility to detect other OSes on a set of drives This package detects other OSes available on a system and outputs the results in a generic machine-readable format. Package: packagekit Status: install ok installed Priority: optional Section: admin Installed-Size: 2952 Maintainer: Matthias Klumpp Architecture: amd64 Multi-Arch: foreign Version: 1.2.6-5+deb12u1 Depends: libglib2.0-bin, polkitd, init-system-helpers (>= 1.52), libappstream4 (>= 0.15.0), libapt-pkg6.0 (>= 1.9.2), libc6 (>= 2.34), libgcc-s1 (>= 3.0), libglib2.0-0 (>= 2.70.0), libgstreamer1.0-0 (>= 1.0.0), libpackagekit-glib2-18 (>= 1.2.4), libpolkit-gobject-1-0 (>= 0.99), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 11), libsystemd0 (>= 214) Recommends: appstream, packagekit-tools, systemd Breaks: plymouth (<< 0.9.5) Conffiles: /etc/PackageKit/PackageKit.conf 71da11578968301072133d233e91cd1e /etc/PackageKit/Vendor.conf 030ed6e12ae40796abf4bdea34bdb472 /etc/apt/apt.conf.d/20packagekit edd8462c9bfc2c453caa7d8650af0487 /etc/dbus-1/system.d/org.freedesktop.PackageKit.conf fded44ee0c8edb7e65b9649570db3574 Description: Provides a package management service PackageKit allows performing simple software management tasks over a DBus interface e.g. refreshing the cache, updating, installing and removing software packages or searching for multimedia codecs and file handlers. . The work is done by backends which make use of the package manager shipped by the corresponding distribution. PackageKit is not meant to replace advanced tools like Synaptic. . The main benefits are: - unified interface on several distributions - fine grained privileges by using PolicyKit - independency from a running desktop session during the processing Homepage: https://www.freedesktop.org/software/PackageKit/ Package: passwd Status: install ok installed Priority: required Section: admin Installed-Size: 2827 Maintainer: Shadow package maintainers Architecture: amd64 Multi-Arch: foreign Source: shadow Version: 1:4.13+dfsg1-1+deb12u2 Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.36), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsemanage2 (>= 2.0.32), libpam-modules Recommends: sensible-utils Conffiles: /etc/default/useradd e03965d134c26725cbc51a57969da6c9 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63 Description: change and administer password and group data This package includes passwd, chsh, chfn, and many other programs to maintain password and group data. . Shadow passwords are supported. See /usr/share/doc/passwd/README.Debian Homepage: https://github.com/shadow-maint/shadow Package: patch Status: install ok installed Priority: optional Section: vcs Installed-Size: 248 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: foreign Version: 2.7.6-7 Depends: libc6 (>= 2.17) Suggests: ed, diffutils-doc Description: Apply a diff file to an original Patch will take a patch file containing any of the four forms of difference listing produced by the diff program and apply those differences to an original file, producing a patched version. Homepage: https://savannah.gnu.org/projects/patch/ Package: perl Status: install ok installed Priority: standard Section: perl Installed-Size: 670 Maintainer: Niko Tyni Architecture: amd64 Multi-Arch: allowed Version: 5.36.0-7+deb12u3 Replaces: perl-base (<< 5.36.0-2), perl-modules (<< 5.22.0~) Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 2.40), libattribute-handlers-perl (= 1.02), libautodie-perl (= 2.34), libcompress-raw-bzip2-perl (= 2.103), libcompress-raw-zlib-perl (= 2.105), libcompress-zlib-perl (= 2.106), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.140), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.58), libdigest-perl (= 1.20), libdigest-sha-perl (= 6.02), libencode-perl (= 3.17), libexperimental-perl (= 0.028), libextutils-cbuilder-perl (= 0.280236), libextutils-command-perl (= 7.64), libextutils-install-perl (= 2.20), libextutils-parsexs-perl (= 3.450000), libfile-spec-perl (= 3.8400), libhttp-tiny-perl (= 0.080), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.106), libio-compress-bzip2-perl (= 2.106), libio-compress-perl (= 2.106), libio-compress-zlib-perl (= 2.106), libio-zlib-perl (= 1.11), libjson-pp-perl (= 4.07000), liblocale-maketext-perl (= 1.31), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 1.999830), libmath-complex-perl (= 1.5902), libmime-base64-perl (= 3.16), libmodule-corelist-perl (= 5.20220520), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000037), libnet-perl (= 1:3.14), libnet-ping-perl (= 2.74), libparams-check-perl (= 0.38), libparent-perl (= 0.238), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.43), libstorable-perl (= 3.26), libsys-syslog-perl (= 0.36), libtest-harness-perl (= 3.44), libtest-simple-perl (= 1.302190), libtest-tester-perl (= 1.302190), libtest-use-ok-perl (= 1.302190), libtext-balanced-perl (= 2.04), libthread-queue-perl (= 3.14), libthreads-perl (= 2.27), libthreads-shared-perl (= 1.64), libtime-hires-perl (= 1.9770), libtime-local-perl (= 1.3000), libtime-piece-perl (= 1.3401), libunicode-collate-perl (= 1.31), libversion-perl (= 1:0.9929), libversion-requirements-perl, podlators-perl (= 4.14) Depends: perl-base (= 5.36.0-7+deb12u3), perl-modules-5.36 (>= 5.36.0-7+deb12u3), libperl5.36 (= 5.36.0-7+deb12u3) Pre-Depends: dpkg (>= 1.17.17) Recommends: netbase Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.36.0-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5) Conflicts: libjson-pp-perl (<< 2.27200-2) Conffiles: /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733 Description: Larry Wall's Practical Extraction and Report Language Perl is a highly capable, feature-rich programming language with over 20 years of development. Perl 5 runs on over 100 platforms from portables to mainframes. Perl is suitable for both rapid prototyping and large scale development projects. . Perl 5 supports many programming styles, including procedural, functional, and object-oriented. In addition to this, it is supported by an ever-growing collection of reusable modules which accelerate development. Some of these modules include Web frameworks, database integration, networking protocols, and encryption. Perl provides interfaces to C and C++ for custom extension development. Homepage: http://dev.perl.org/perl5/ Package: perl-base Essential: yes Status: install ok installed Priority: required Section: perl Installed-Size: 7639 Maintainer: Niko Tyni Architecture: amd64 Source: perl Version: 5.36.0-7+deb12u3 Replaces: libfile-path-perl (<< 2.18), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.41), libscalar-list-utils-perl (<< 1:1.62), libsocket-perl (<< 2.033), libxsloader-perl (<< 0.31), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3) Provides: libfile-path-perl (= 2.18), libfile-temp-perl (= 0.2311), libio-socket-ip-perl (= 0.41), libscalar-list-utils-perl (= 1:1.62), libsocket-perl (= 2.033), libxsloader-perl (= 0.31), perlapi-5.36.0 Pre-Depends: libc6 (>= 2.35), libcrypt1 (>= 1:4.1.0), dpkg (>= 1.17.17) Suggests: perl, sensible-utils Breaks: amanda-common (<< 1:3.3.9-2), backuppc (<< 4.4.0-7~), bucardo (<< 5.5.0-1.1), debconf (<< 1.5.61), dh-haskell (<< 0.3), duck (<< 0.14.1), intltool (<< 0.51.0-4), kio-perldoc (<< 20.04.1-1), latexml (<< 0.8.4-2), libdevel-mat-dumper-perl (<< 0.42-3), libencode-arabic-perl (<< 14.2-2), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.18), libfile-spec-perl (<< 3.8400), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.41), libmp3-tag-perl (<< 1.13-1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.62), libsocket-perl (<< 2.033), libxsloader-perl (<< 0.31), mailagent (<< 1:3.1-81-2), perl (<< 5.36.0~), perl-modules (<< 5.36.0~), pod2pdf (<< 0.42-5.1), slic3r (<< 1.2.9+dfsg-6.1), slic3r-prusa (<< 1.37.0+dfsg-1.1), texinfo (<< 6.1.0.dfsg.1-8) Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41) Description: minimal Perl system Perl is a scripting language used in many system scripts and utilities. . This package provides a Perl interpreter and the small subset of the standard run-time library required to perform basic tasks. For a full Perl installation, install "perl" (and its dependencies, "perl-modules-5.36" and "perl-doc"). Homepage: http://dev.perl.org/perl5/ Package: perl-modules-5.36 Status: install ok installed Priority: optional Section: libs Installed-Size: 17817 Maintainer: Niko Tyni Architecture: all Multi-Arch: foreign Source: perl Version: 5.36.0-7+deb12u3 Replaces: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.40), libattribute-handlers-perl (<< 1.02), libautodie-perl (<< 2.34), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.028), libextutils-cbuilder-perl (<< 0.280236), libextutils-command-perl (<< 7.64), libextutils-install-perl (<< 2.20), libextutils-parsexs-perl (<< 3.450000), libfile-spec-perl (<< 3.8400), libhttp-tiny-perl (<< 0.080), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.11), libjson-pp-perl (<< 4.07000), liblocale-maketext-perl (<< 1.31), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999830), libmath-complex-perl (<< 1.5902), libmodule-corelist-perl (<< 5.20220520), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.14), libnet-ping-perl (<< 2.74), libparams-check-perl (<< 0.38), libparent-perl (<< 0.238), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.43), libtest-harness-perl (<< 3.44), libtest-simple-perl (<< 1.302190), libtest-tester-perl (<< 1.302190), libtest-use-ok-perl (<< 1.302190), libtext-balanced-perl (<< 2.04), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9929), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 4.14) Provides: perl-modules Depends: perl-base (>= 5.36.0-1) Pre-Depends: dpkg (>= 1.17.17) Recommends: perl (>= 5.36.0-1) Breaks: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.40), libattribute-handlers-perl (<< 1.02), libautodie-perl (<< 2.34), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.028), libextutils-cbuilder-perl (<< 0.280236), libextutils-command-perl (<< 7.64), libextutils-install-perl (<< 2.20), libextutils-parsexs-perl (<< 3.450000), libfile-spec-perl (<< 3.8400), libhttp-tiny-perl (<< 0.080), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.11), libjson-pp-perl (<< 4.07000), liblocale-maketext-perl (<< 1.31), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999830), libmath-complex-perl (<< 1.5902), libmodule-corelist-perl (<< 5.20220520), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.14), libnet-ping-perl (<< 2.74), libparams-check-perl (<< 0.38), libparent-perl (<< 0.238), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.43), libtest-harness-perl (<< 3.44), libtest-simple-perl (<< 1.302190), libtest-tester-perl (<< 1.302190), libtest-use-ok-perl (<< 1.302190), libtext-balanced-perl (<< 2.04), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9929), maildirsync (<< 1.2-2.1), perl (<< 5.36.0~), podlators-perl (<< 4.14) Conflicts: perl-modules (<< 5.22.0~) Description: Core Perl modules Architecture independent Perl modules. These modules are part of Perl and required if the `perl' package is installed. . Note that this package only exists to save archive space and should be considered an internal implementation detail of the `perl' package. Other packages should not depend on `perl-modules-5.36' directly, they should use `perl' (which depends on `perl-modules-5.36') instead. Homepage: http://dev.perl.org/perl5/ Package: perl-openssl-defaults Status: install ok installed Priority: optional Section: perl Installed-Size: 29 Maintainer: Debian Perl Group Architecture: amd64 Multi-Arch: same Source: perl-openssl-defaults (7) Version: 7+b1 Provides: dh-sequence-perl-openssl, perl-openssl-abi-3 Depends: libc6 (>= 2.2.5), libssl3 (>= 3.0.0) Suggests: debhelper Description: version compatibility baseline for Perl OpenSSL packages A subset of Perl XS module packages expose the OpenSSL binary interface to Perl code. This can lead to incompatibilities if these packages are linked against different versions of OpenSSL. . This package provides a virtual package "perl-openssl-abi-x" that corresponds to the libssl-dev package SONAME it was built against. The packages that need to stay compatible with each other can depend on this. . Tools are also provided for generating this dependency with minimum hassle. See the instructions in README.Debian. Package: pinentry-curses Status: install ok installed Priority: optional Section: utils Installed-Size: 140 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: foreign Source: pinentry Version: 1.2.1-1 Provides: pinentry Depends: libassuan0 (>= 2.1.0), libc6 (>= 2.34), libgpg-error0 (>= 1.16), libncursesw6 (>= 6), libtinfo6 (>= 6) Suggests: pinentry-doc Enhances: gnupg-agent Description: curses-based PIN or pass-phrase entry dialog for GnuPG This package contains a program that allows for secure entry of PINs or pass phrases. That means it tries to take care that the entered information is not swapped to disk or temporarily stored anywhere. This functionality is particularly useful for entering pass phrases when using encryption software such as GnuPG or e-mail clients using the same. It uses an open protocol and is therefore not tied to particular software. . The program contained in this package implements a PIN entry dialog using the curses tool kit, meaning that it is useful for users working in text mode without the X Window System. There are sibling packages that implement PIN entry dialogs that use an X tool kit. If you install any of the graphical packages then this package is not necessary because the sibling packages automatically fall back to text mode if X is not active. Homepage: https://www.gnupg.org/related_software/pinentry/ Package: pipx Status: install ok installed Priority: optional Section: python Installed-Size: 913 Maintainer: Debian Python Team Architecture: all Source: python-pipx Version: 1.1.0-1 Depends: python3-venv, python3-argcomplete, python3-importlib-metadata | python3 (>> 3.8), python3-packaging, python3-userpath, python3:any Recommends: fonts-font-awesome (>= 5.0.10+really4.7.0~dfsg-4.1), libjs-bootstrap4 (>= 4.6.1+dfsg1-4), libjs-highlight.js, libjs-jquery (>= 3.6.1+dfsg+~3.5.14-1), libjs-lunr (>= 2.3.9~dfsg-2), mkdocs (>= 1.4.2+dfsg-2) Description: execute binaries from Python packages in isolated environments pipx allows you to... . * Run the latest version of a CLI application from a package in a temporary virtual environment, leaving your system untouched after it finishes. * Install packages to isolated virtual environments, while globally exposing their CLI applications so you can run them from anywhere. * Easily list, upgrade, and uninstall packages that were installed with pipx. . pipx runs with regular user permissions, never calling "sudo pip install". Homepage: https://github.com/pypa/pipx Package: pkg-config Status: deinstall ok config-files Priority: optional Section: oldlibs Installed-Size: 29 Maintainer: Andrej Shadura Architecture: amd64 Multi-Arch: same Source: pkgconf Version: 1.8.1-1 Config-Version: 1.8.1-1 Depends: pkgconf (>= 1.8.0-7~) Conffiles: /etc/dpkg/dpkg.cfg.d/pkg-config-hook-config newconffile remove-on-upgrade Description: manage compile and link flags for libraries (transitional package) pkgconf is an implementation of the pkg-config system, which helps to configure compiler and linker flags for development frameworks. . pkgconf is a replacement for pkg-config, providing additional functionality while also maintaining compatibility. . This package only provides a dependency link to the pkgconf package to help with package upgrades. It can be safely removed. Homepage: http://pkgconf.org/ Package: pkgconf Status: deinstall ok config-files Priority: optional Section: devel Installed-Size: 65 Maintainer: Andrej Shadura Architecture: amd64 Multi-Arch: same Version: 1.8.1-1 Config-Version: 1.8.1-1 Replaces: pkg-config (<< 1.8) Provides: pkg-config (= 1.8.1-1) Depends: pkgconf-bin Breaks: pkg-config (<< 1.8) Conffiles: /etc/dpkg/dpkg.cfg.d/pkgconf-hook-config newconffile remove-on-upgrade Description: manage compile and link flags for libraries pkgconf is an implementation of the pkg-config system, which helps to configure compiler and linker flags for development frameworks. . pkgconf is a replacement for pkg-config, providing additional functionality while also maintaining compatibility. Homepage: http://pkgconf.org/ Package: polkitd Status: install ok installed Priority: optional Section: admin Installed-Size: 470 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: foreign Source: policykit-1 Version: 122-3 Replaces: policykit-1 (<< 0.120-4~), polkitd-javascript (<< 121+compat0.1-3~) Depends: adduser | systemd-sysusers, default-dbus-system-bus | dbus-system-bus, default-logind | logind, xml-core (>= 0.14), libc6 (>= 2.34), libduktape207 (>= 2.0.3), libexpat1 (>= 2.0.1), libglib2.0-0 (>= 2.37.3), libpam0g (>= 0.99.7.1), libpolkit-agent-1-0 (= 122-3), libpolkit-gobject-1-0 (= 122-3), libsystemd0 (>= 213) Suggests: polkitd-pkla (>= 121+compat0.1) Breaks: policykit-1 (<< 0.120-4~), polkitd-javascript (<< 121+compat0.1-3~) Description: framework for managing administrative policies and privileges polkit is an application-level toolkit for defining and handling the policy that allows unprivileged processes to speak to privileged processes. It was previously named PolicyKit. . It is a framework for centralizing the decision making process with respect to granting access to privileged operations for unprivileged (desktop) applications. . In a typical use of polkit, an unprivileged application such as gnome-disks sends requests via D-Bus or other inter-process communication mechanisms to a privileged system service such as udisks, which asks polkitd for permission to process those requests. This allows the application to carry out privileged tasks without making use of setuid, which avoids several common sources of security vulnerabilities. . This package provides the polkitd D-Bus service and supporting programs. The pkexec program is not included, and can be found in the pkexec package. Homepage: https://www.freedesktop.org/wiki/Software/polkit/ Package: postfix Status: install ok installed Priority: optional Section: mail Installed-Size: 4017 Maintainer: LaMont Jones Architecture: amd64 Version: 3.7.11-0+deb12u1 Replaces: mail-transport-agent Provides: mail-transport-agent Depends: libc6 (>= 2.34), libdb5.3, libicu72 (>= 72.1~rc-1~), libnsl2 (>= 1.0), libsasl2-2 (>= 2.1.28+dfsg), libssl3 (>= 3.0.0), debconf (>= 0.5) | debconf-2.0, netbase, adduser (>= 3.48), dpkg (>= 1.8.3), ssl-cert, cpio, e2fsprogs Pre-Depends: init-system-helpers (>= 1.54~) Recommends: python3, ca-certificates Suggests: procmail, postfix-mysql, postfix-pgsql, postfix-ldap, postfix-pcre, postfix-lmdb, postfix-sqlite, sasl2-bin | dovecot-common, libsasl2-modules | dovecot-common, resolvconf, postfix-cdb, mail-reader, postfix-mta-sts-resolver, ufw, postfix-doc Conflicts: mail-transport-agent, smail Conffiles: /etc/init.d/postfix 394590f409167c291ab25309361d48eb /etc/insserv.conf.d/postfix 7fe2d086ff4822fc9fe13adab1090dce /etc/network/if-down.d/postfix a72bb9cc8c2ecff9802f5d580ad9ce0a /etc/network/if-up.d/postfix 5bcf5310518ead318871689424129b24 /etc/postfix/post-install a4d8cfa6319c13a5b4f0b42227f16547 /etc/postfix/postfix-files 1d704c9613552a2ba1003af7958db130 /etc/postfix/postfix-script 7d9116d6267632d74f642d70ac4b1ef1 /etc/ppp/ip-down.d/postfix a72bb9cc8c2ecff9802f5d580ad9ce0a /etc/ppp/ip-up.d/postfix 5bcf5310518ead318871689424129b24 /etc/resolvconf/update-libc.d/postfix 60d8805fabdbb6a44f10f9af380985ad /etc/rsyslog.d/postfix.conf d8a09827fff2a22311e4dd4a83e95c83 /etc/ufw/applications.d/postfix 5c7e746dc9255e750b8f50460de11a32 Description: High-performance mail transport agent Postfix is Wietse Venema's mail transport agent that started life as an alternative to the widely-used Sendmail program. Postfix attempts to be fast, easy to administer, and secure, while at the same time being sendmail compatible enough to not upset existing users. Thus, the outside has a sendmail-ish flavor, but the inside is completely different. Homepage: https://www.postfix.org Package: postfix-pcre Status: install ok installed Priority: optional Section: mail Installed-Size: 388 Maintainer: LaMont Jones Architecture: amd64 Source: postfix Version: 3.7.11-0+deb12u1 Depends: libc6 (>= 2.4), libpcre2-8-0 (>= 10.22), postfix (= 3.7.11-0+deb12u1) Conffiles: /etc/postfix/postfix-files.d/pcre.files 4e98e4e37ff5e622de0dae1b5198b2e6 Description: PCRE map support for Postfix Postfix is Wietse Venema's mail transport agent that started life as an alternative to the widely-used Sendmail program. Postfix attempts to be fast, easy to administer, and secure, while at the same time being sendmail compatible enough to not upset existing users. Thus, the outside has a sendmail-ish flavor, but the inside is completely different. . This provides support for PCRE (perl compatible regular expression) maps in Postfix. If you plan to use PCRE maps with Postfix, you need this. Homepage: https://www.postfix.org Package: postgresql Status: install ok installed Priority: optional Section: database Installed-Size: 16 Maintainer: Debian PostgreSQL Maintainers Architecture: all Source: postgresql-common (248+deb12u1) Version: 15+248+deb12u1 Depends: postgresql-15 Suggests: postgresql-doc Description: object-relational SQL database (supported version) This metapackage always depends on the currently supported PostgreSQL database server version. . PostgreSQL is a fully featured object-relational database management system. It supports a large part of the SQL standard and is designed to be extensible by users in many aspects. Some of the features are: ACID transactions, foreign keys, views, sequences, subqueries, triggers, user-defined types and functions, outer joins, multiversion concurrency control. Graphical user interfaces and bindings for many programming languages are available as well. Package: postgresql-15 Status: install ok installed Priority: optional Section: database Installed-Size: 53045 Maintainer: Debian PostgreSQL Maintainers Architecture: amd64 Version: 15.18-0+deb12u1 Provides: postgresql-15-jit-llvm (= 14), postgresql-contrib-15 Depends: locales | locales-all, postgresql-client-15, postgresql-common (>= 241~), ssl-cert, tzdata, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgssapi-krb5-2 (>= 1.14+dfsg), libicu72 (>= 72.1~rc-1~), libldap-2.5-0 (>= 2.5.4), libllvm14, liblz4-1 (>= 0.0~r130), libpam0g (>= 0.99.7.1), libpq5 (>= 14~beta2), libselinux1 (>= 3.1~), libssl3 (>= 3.0.0), libstdc++6 (>= 5.2), libsystemd0, libuuid1 (>= 2.16), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Recommends: sysstat Breaks: dbconfig-common (<< 2.0.22~) Description: The World's Most Advanced Open Source Relational Database PostgreSQL, also known as Postgres, is a free and open-source relational database management system (RDBMS) emphasizing extensibility and SQL compliance. It features transactions with Atomicity, Consistency, Isolation, Durability (ACID) properties, automatically updatable views, materialized views, triggers, foreign keys, and stored procedures. It is designed to handle a range of workloads, from single machines to data warehouses or Web services with many concurrent users. . This package provides the database server for PostgreSQL 15. Homepage: http://www.postgresql.org/ Postgresql-Catversion: 202209061 Package: postgresql-client-15 Status: install ok installed Priority: optional Section: database Installed-Size: 8289 Maintainer: Debian PostgreSQL Maintainers Architecture: amd64 Multi-Arch: foreign Source: postgresql-15 Version: 15.18-0+deb12u1 Provides: postgresql-client Depends: libpq5 (>= 15.18), postgresql-client-common (>= 182~), sensible-utils, libc6 (>= 2.34), liblz4-1 (>= 0.0~r127), libreadline8 (>= 6.0), libssl3 (>= 3.0.0), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Suggests: postgresql-15, postgresql-doc-15 Description: front-end programs for PostgreSQL 15 This package contains client and administrative programs for PostgreSQL: these are the interactive terminal client psql and programs for creating and removing users and databases. . This is the client package for PostgreSQL 15. If you install PostgreSQL 15 on a standalone machine, you need the server package postgresql-15, too. On a network, you can install this package on many client machines, while the server package may be installed on only one machine. . PostgreSQL is an object-relational SQL database management system. Homepage: http://www.postgresql.org/ Package: postgresql-client-common Status: install ok installed Priority: optional Section: database Installed-Size: 130 Maintainer: Debian PostgreSQL Maintainers Architecture: all Multi-Arch: foreign Source: postgresql-common Version: 248+deb12u1 Depends: netbase, perl:any Conffiles: /etc/postgresql-common/supported_versions 71e93cbf6b710f422a5c54e9a63282a5 /etc/postgresql-common/user_clusters d2959e6ae6847342be07146ce06af33b Description: manager for multiple PostgreSQL client versions The postgresql-client-common package provides a structure under which multiple versions of PostgreSQL client programs may be installed at the same time. It provides a wrapper which selects the right version for the particular cluster you want to access (with a command line option, an environment variable, /etc/postgresql-common/user_clusters, or ~/.postgresqlrc). . PostgreSQL is a fully featured object-relational database management system. It supports a large part of the SQL standard and is designed to be extensible by users in many aspects. Its features include ACID transactions, foreign keys, views, sequences, subqueries, triggers, outer joins, multiversion concurrency control, and user-defined types and functions. Package: postgresql-common Status: install ok installed Priority: optional Section: database Installed-Size: 657 Maintainer: Debian PostgreSQL Maintainers Architecture: all Multi-Arch: foreign Version: 248+deb12u1 Replaces: pgdg-keyring, postgresql-server-dev-all (<< 204) Depends: adduser, debconf (>= 0.5.00) | debconf-2.0, libjson-perl, lsb-base (>= 3.0-3), postgresql-client-common (= 248+deb12u1), ssl-cert (>= 1.0.11), ucf, perl:any Pre-Depends: init-system-helpers (>= 1.54~) Recommends: e2fsprogs, logrotate Breaks: postgresql-9.1 (<< 9.1.1-3~), postgresql-server-dev-all (<< 204) Conflicts: pgdg-keyring Conffiles: /etc/init.d/postgresql 1b9da643d7a403248d70e1776fb98458 /etc/logrotate.d/postgresql-common 101326ef5d138998692ece35109ef1a2 Description: PostgreSQL database-cluster manager The postgresql-common package provides a structure under which multiple versions of PostgreSQL may be installed and/or multiple clusters maintained at one time. . The commands provided are pg_conftool, pg_createcluster, pg_ctlcluster, pg_dropcluster, pg_lsclusters, pg_renamecluster, pg_upgradecluster, pg_virtualenv. . PostgreSQL is a fully featured object-relational database management system. It supports a large part of the SQL standard and is designed to be extensible by users in many aspects. Its features include ACID transactions, foreign keys, views, sequences, subqueries, triggers, outer joins, multiversion concurrency control, and user-defined types and functions. Package: postgresql-contrib Status: install ok installed Priority: optional Section: database Installed-Size: 16 Maintainer: Debian PostgreSQL Maintainers Architecture: all Source: postgresql-common (248+deb12u1) Version: 15+248+deb12u1 Depends: postgresql-contrib-15 Description: additional facilities for PostgreSQL (supported version) This metapackage always depends on the currently supported PostgreSQL database contrib package. . PostgreSQL is a fully featured object-relational database management system. It supports a large part of the SQL standard and is designed to be extensible by users in many aspects. Some of the features are: ACID transactions, foreign keys, views, sequences, subqueries, triggers, user-defined types and functions, outer joins, multiversion concurrency control. Graphical user interfaces and bindings for many programming languages are available as well. Package: procps Status: install ok installed Priority: important Section: admin Installed-Size: 2091 Maintainer: Craig Small Architecture: amd64 Multi-Arch: foreign Version: 2:4.0.2-3 Replaces: manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2) Provides: watch Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libproc2-0 (>= 2:4.0.2), libtinfo6 (>= 6), init-system-helpers (>= 1.29~) Recommends: psmisc Breaks: guymager (<= 0.5.9-1), manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2), open-vm-tools (<= 2011.12.20-562307-1) Conffiles: /etc/init.d/procps f9903aa0d9f2f10714269befb4cdba8f /etc/sysctl.conf c0c09cba30da0565737cace8000d64ee /etc/sysctl.d/README.sysctl 48e64ce233c8aba8e0693adf8cf4c464 Description: /proc file system utilities This package provides command line and full screen utilities for browsing procfs, a "pseudo" file system dynamically generated by the kernel to provide information about the status of entries in its process table (such as whether the process is running, stopped, or a "zombie"). . It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop, snice, sysctl, tload, top, uptime, vmstat, w, and watch. Homepage: https://gitlab.com/procps-ng/procps Package: prosody Status: install ok installed Priority: optional Section: net Installed-Size: 2100 Maintainer: Debian XMPP Maintainers Architecture: amd64 Multi-Arch: foreign Version: 0.12.3-1+deb12u1 Provides: xmpp-server Depends: adduser, lua-expat (>= 1.2.0), lua-filesystem (>= 1.4.2-3~), lua5.4, lua5.4-bitop, lua5.4-expat, lua5.4-filesystem, lua5.4-sec, lua5.4-socket, ssl-cert, libc6 (>= 2.34), libicu72 (>= 72.1~rc-1~), libssl3 (>= 3.0.0) Pre-Depends: init-system-helpers (>= 1.54~) Recommends: lua5.4-event, lua5.4-readline, lua5.4-unbound Suggests: lua-dbi-mysql, lua-dbi-postgresql, lua-dbi-sqlite3, lua-zlib Conflicts: prosody-modules (<< 0.0~hg20220330.b45c23ce24ba+dfsg-1) Conffiles: /etc/init.d/prosody 106dcd9e7a842ad61ad6523d906245b4 /etc/logrotate.d/prosody 806c5f1c3137ccb0ab544c8a38d63a54 /etc/prosody/README 0449cb3bc6efd160f9621c1f2503572d /etc/prosody/conf.avail/example.com.cfg.lua e4d047b795e1e062844dd7f14e45b44f /etc/prosody/conf.avail/localhost.cfg.lua c5005c1f57bd8a44ae572320ace8227b /etc/prosody/migrator.cfg.lua 34b57351f374d40a1b23426caedd61bc /etc/prosody/prosody.cfg.lua d05c118e7446f9dda5bf33ad5a182740 Description: Lightweight Jabber/XMPP server Prosody is a modern XMPP communication server. It aims to be easy to set up and configure, and efficient with system resources. Additionally, for developers it aims to be easy to extend and give a flexible system on which to rapidly develop added functionality, or prototype new protocols. Homepage: http://www.prosody.im/ Package: psmisc Status: install ok installed Priority: optional Section: admin Installed-Size: 909 Maintainer: Craig Small Architecture: amd64 Multi-Arch: foreign Version: 23.6-1 Replaces: manpages-de (<< 4.9.1-1) Depends: libc6 (>= 2.34), libtinfo6 (>= 6) Breaks: manpages-de (<< 4.9.1-1) Description: utilities that use the proc file system This package contains miscellaneous utilities that use the proc FS: . - fuser: identifies processes that are using files or sockets. - killall: kills processes by name (e.g. "killall -HUP named"). - peekfd: shows the data traveling over a file descriptor. - pstree: shows currently running processes as a tree. - prtstat: print the contents of /proc//stat Homepage: http://psmisc.sf.net/ Package: publicsuffix Status: install ok installed Priority: optional Section: net Installed-Size: 339 Maintainer: Daniel Kahn Gillmor Architecture: all Multi-Arch: foreign Version: 20230209.2326-1 Provides: publicsuffix-dafsa Description: accurate, machine-readable list of domain name suffixes A machine-readable list of domain name suffixes that accept public registration. Each suffix represents the part of a domain name which is not under the control of the individual registrant, which makes the list useful for grouping cookies, deciding same-origin policies, collating spam, and other activities. Homepage: https://publicsuffix.org Package: python-apt-common Status: install ok installed Priority: optional Section: python Installed-Size: 527 Maintainer: APT Development Team Architecture: all Multi-Arch: foreign Source: python-apt Version: 2.6.0 Replaces: python-apt (<< 0.7.98+nmu1) Breaks: python-apt (<< 0.7.98+nmu1) Enhances: python-apt, python3-apt Description: Python interface to libapt-pkg (locales) The apt_pkg Python interface will provide full access to the internal libapt-pkg structures allowing Python programs to easily perform a variety of functions. . This package contains locales. Package: python3 Status: install ok installed Priority: optional Section: python Installed-Size: 81 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Source: python3-defaults (3.11.2-1) Version: 3.11.2-1+b1 Replaces: python3-minimal (<< 3.1.2-2) Provides: python3-profiler, python3-supported-max (= 3.11), python3-supported-min (= 3.11) Depends: python3.11 (>= 3.11.2-1~), libpython3-stdlib (= 3.11.2-1+b1) Pre-Depends: python3-minimal (= 3.11.2-1+b1) Suggests: python3-doc (>= 3.11.2-1+b1), python3-tk (>= 3.11.2-1~), python3-venv (>= 3.11.2-1+b1) Description: interactive high-level object-oriented language (default python3 version) Python, the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package is a dependency package, which depends on Debian's default Python 3 version (currently v3.11). Homepage: https://www.python.org/ Package: python3-acme Status: install ok installed Priority: optional Section: python Installed-Size: 141 Maintainer: Debian Let's Encrypt Architecture: all Source: python-acme Version: 2.1.0-1 Provides: python3-acme-abi-2 (= 2.1) Depends: ca-certificates, python3-openssl (>= 17.5.0), python3-cryptography (>= 2.5.0), python3-josepy (>= 1.13.0~), python3-pkg-resources, python3-requests, python3-rfc3339, python3-tz (>= 2019.3~), python3:any Suggests: python-acme-doc Description: ACME protocol library for Python 3 This is a library used by the Let's Encrypt client for the ACME (Automated Certificate Management Environment). The ACME protocol is designed as part of the Let's Encrypt project, to make it possible to setup an HTTPS server and have it automatically obtain a browser-trusted certificate, without any human intervention. This library implements the protocol used for proving the control of a domain. This library is Python 3. Homepage: https://letsencrypt.org/ Package: python3-apt Status: install ok installed Priority: optional Section: python Installed-Size: 685 Maintainer: APT Development Team Architecture: amd64 Multi-Arch: allowed Source: python-apt Version: 2.6.0 Replaces: python-apt (<< 0.7.98+nmu1) Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libapt-pkg6.0 (>= 1.9.11~), libc6 (>= 2.33), libgcc-s1 (>= 3.0), libstdc++6 (>= 11), python-apt-common, distro-info-data Recommends: lsb-release, iso-codes Suggests: python-apt-doc, apt Breaks: apt-xapian-index (<< 0.51~), kthresher (<= 1.4.0-1), python-apt (<< 0.7.98+nmu1) Description: Python 3 interface to libapt-pkg The apt_pkg Python 3 interface will provide full access to the internal libapt-pkg structures allowing Python 3 programs to easily perform a variety of functions, such as: . - Access to the APT configuration system - Access to the APT package information database - Parsing of Debian package control files, and other files with a similar structure . The included 'aptsources' Python interface provides an abstraction of the sources.list configuration on the repository and the distro level. Package: python3-argcomplete Status: install ok installed Priority: optional Section: python Installed-Size: 139 Maintainer: Debian Python Team Architecture: all Source: python-argcomplete Version: 2.0.0-1 Replaces: python-argcomplete Depends: python3-importlib-metadata | python3 (<< 3.6) | python3 (>> 3.7), python3-importlib-metadata | python3 (<< 3.7) | python3 (>> 3.8), python3:any Breaks: python-argcomplete Description: bash tab completion for argparse (for Python 3) Argcomplete provides easy, extensible command line tab completion of arguments for your Python script. . It makes two assumptions: . * You're using bash as your shell * You're using argparse to manage your command line arguments/options . Argcomplete is particularly useful if your program has lots of options or subparsers, and if your program can dynamically suggest completions for your argument/option values (for example, if the user is browsing resources over the network). . This package provides the module for Python 3.x. Package: python3-attr Status: install ok installed Priority: optional Section: python Installed-Size: 251 Maintainer: Debian Python Team Architecture: all Source: python-attrs Version: 22.2.0-1 Depends: python3:any Suggests: python-attr-doc Description: Attributes without boilerplate (Python 3) attrs is an MIT-licensed Python package with class decorators that ease the chores of implementing the most common attribute-related object protocols. . You just specify the attributes to work with and attrs gives you: - a nice human-readable __repr__, - a complete set of comparison methods, - an initializer, - and much more without writing dull boilerplate code again and again. . This package contains attrs packaged for Python 3. Homepage: https://attrs.readthedocs.org/ Package: python3-blinker Status: install ok installed Priority: optional Section: python Installed-Size: 58 Maintainer: Debian Python Team Architecture: all Source: blinker Version: 1.5-1 Depends: python3:any Suggests: python-blinker-doc Description: Fast, simple object-to-object and broadcast signaling (Python3) Blinker provides fast & simple object-to-object and broadcast signaling for Python objects. Interested signal receivers can subscribe to specific senders or receive signals sent by any sender. . The core of Blinker is quite small but provides powerful features: * a global registry of named signals * anonymous signals * custom name registries * permanently or temporarily connected receivers * automatically disconnected receivers via weak referencing * sending arbitrary data payloads * collecting return values from signal receivers * thread safety . This package contains the Python 3 version. Homepage: https://github.com/pallets-eco/blinker Package: python3-certbot Status: install ok installed Priority: optional Section: python Installed-Size: 902 Maintainer: Debian Let's Encrypt Architecture: all Source: python-certbot Version: 2.1.0-4 Replaces: python-letsencrypt Provides: python3-certbot-abi-2 (= 2.1) Depends: python3-acme-abi-2 (>= 2.1), python3-requests, python3-acme, python3-configargparse, python3-configobj, python3-cryptography (>= 2.5.0), python3-distro, python3-josepy (>= 1.13.0~), python3-parsedatetime (>= 2.4), python3-pkg-resources, python3-rfc3339, python3-tz (>= 2019.3), python3:any Recommends: certbot Suggests: python-certbot-doc Breaks: python-letsencrypt (<= 0.6.0) Description: main library for certbot The objective of Certbot, Let's Enc rypt, and the ACME (Automated Certificate Management Environment) protocol is to make it possible to set up an HTTPS server and have it automatically obtain a browser-trusted certificate, without any human intervention. This is accomplished by running a certificate management agent on the web server. . This agent is used to: . - Automatically prove to the Let's Encrypt CA that you control the website - Obtain a browser-trusted certificate and set it up on your web server - Keep track of when your certificate is going to expire, and renew it - Help you revoke the certificate if that ever becomes necessary. . This package contains the main libraries. Homepage: https://certbot.eff.org/ Package: python3-certbot-nginx Status: install ok installed Priority: optional Section: python Installed-Size: 171 Maintainer: Debian Let's Encrypt Architecture: all Source: python-certbot-nginx Version: 2.1.0-2 Depends: certbot, nginx, python3-acme-abi-2 (>= 2.1), python3-certbot-abi-2 (>= 2.1), python3-acme, python3-certbot, python3-openssl, python3-pkg-resources, python3-pyparsing, python3:any Suggests: python-certbot-nginx-doc Description: Nginx plugin for Certbot The objective of Certbot, Let's Encrypt, and the ACME (Automated Certificate Management Environment) protocol is to make it possible to set up an HTTPS server and have it automatically obtain a browser-trusted certificate, without any human intervention. This is accomplished by running a certificate management agent on the web server. . This agent is used to: . - Automatically prove to the Let's Encrypt CA that you control the website - Obtain a browser-trusted certificate and set it up on your web server - Keep track of when your certificate is going to expire, and renew it - Help you revoke the certificate if that ever becomes necessary. . This package contains the Nginx plugin to the main application. Homepage: https://letsencrypt.org/ Package: python3-certifi Status: install ok installed Priority: optional Section: python Installed-Size: 324 Maintainer: Sebastien Delafond Architecture: all Source: python-certifi Version: 2022.9.24-1 Depends: ca-certificates, python3:any Description: root certificates for validating SSL certs and verifying TLS hosts (python3) Certifi is a carefully curated collection of Root Certificates for validating the trustworthiness of SSL certificates while verifying the identity of TLS hosts. It has been extracted from the Requests project. . The version of certifi in this Debian package is patched to return the location of Debian-provided CA certificates, instead of those packaged by upstream. . This is the python3 package. Homepage: https://github.com/certifi/python-certifi Package: python3-cffi-backend Status: install ok installed Priority: optional Section: python Installed-Size: 213 Maintainer: Debian Python Team Architecture: amd64 Multi-Arch: same Source: python-cffi (1.15.1-5) Version: 1.15.1-5+b1 Provides: python3-cffi-backend-api-9729, python3-cffi-backend-api-max (= 10495), python3-cffi-backend-api-min (= 9729) Depends: python3 (<< 3.12), python3 (>= 3.11~), libc6 (>= 2.34), libffi8 (>= 3.4) Description: Foreign Function Interface for Python 3 calling C code - runtime Convenient and reliable way of calling C code from Python 3. . The aim of this project is to provide a convenient and reliable way of calling C code from Python. It keeps Python logic in Python, and minimises the C required. It is able to work at either the C API or ABI level, unlike most other approaches, that only support the ABI level. . This package contains the runtime support for pre-built cffi modules. Homepage: https://cffi.readthedocs.org/ Package: python3-chardet Status: install ok installed Priority: optional Section: python Installed-Size: 1144 Maintainer: Piotr Ożarowski Architecture: all Multi-Arch: foreign Source: chardet Version: 5.1.0+dfsg-2 Replaces: python-chardet (<< 3.0.4-6) Depends: python3:any, python3-pkg-resources Breaks: python-chardet (<< 3.0.4-6) Description: Universal Character Encoding Detector (Python3) Chardet is a continuation of Mark Pilgrim's excellent original chardet port from C, and Ian Cordasco's charade Python 3-compatible fork. Chardet takes a sequence of bytes in an unknown character encoding, and attempts to determine the encoding. . Supported encodings: * Big5, GB2312/GB18030, EUC-TW, HZ-GB-2312, and ISO-2022-CN (Traditional and Simplified Chinese) * EUC-JP, SHIFT_JIS, and ISO-2022-JP (Japanese) * EUC-KR and ISO-2022-KR (Korean) * KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, and windows-1251 (Russian) * ISO-8859-2 and windows-1250 (Hungarian) * ISO-8859-5 and windows-1251 (Bulgarian) * ISO-8859-1 and windows-1252 (Western European languages) * ISO-8859-7 and windows-1253 (Greek) * ISO-8859-8 and windows-1255 (Visual and Logical Hebrew) * TIS-620 (Thai) * UTF-32 BE, LE, 3412-ordered, or 2143-ordered (with a BOM) * UTF-16 BE or LE (with a BOM) * UTF-8 (with or without a BOM) * ASCII . This library is a port of the auto-detection code in Mozilla. . This package contains the Python 3 version of the library. Homepage: https://github.com/chardet/chardet Package: python3-charset-normalizer Status: install ok installed Priority: optional Section: python Installed-Size: 209 Maintainer: Debian Python Team Architecture: all Source: python-charset-normalizer Version: 3.0.1-2 Depends: python3:any Description: charset, encoding and language detection (Python 3) charset-normalizer is a library for detection of charsets, encodings, and languages in Python programs. It can be compared to chardet, with a different approach, which intends to make it faster and more reliable. charset-normalizer can also detect natural languages. . All IANA character set names for which the Python core library provides codecs are supported. . This package installs the library for Python 3. Homepage: https://github.com/ousret/charset_normalizer Package: python3-click Status: install ok installed Priority: optional Section: python Installed-Size: 379 Maintainer: Sandro Tosi Architecture: all Source: python-click Version: 8.1.3-2 Depends: python3-colorama, python3-importlib-metadata | python3 (>> 3.8), python3:any Breaks: python3-click-threading (<< 0.5.0) Description: Wrapper around optparse for command line utilities - Python 3.x Click is a Python package for creating beautiful command line interfaces in a composable way with as little code as necessary. It's the "Command Line Interface Creation Kit". It's highly configurable but comes with sensible defaults out of the box. . It aims to make the process of writing command line tools quick and fun while also preventing any frustration caused by the inability to implement an intended CLI API. . This is the Python 3 compatible package. Homepage: https://github.com/pallets/click Package: python3-colorama Status: install ok installed Priority: optional Section: python Installed-Size: 133 Maintainer: Debian Python Team Architecture: all Source: python-colorama Version: 0.4.6-2 Depends: python3:any Description: Cross-platform colored terminal text in Python - Python 3.x Python-colorama provides a simple cross-platform API to print colored terminal text from Python applications. . ANSI escape character sequences are commonly used to produce colored terminal text on Unix. Colorama provides some shortcuts to generate these sequences. . This package provides the module for Python 3. Homepage: https://github.com/tartley/colorama Package: python3-configargparse Status: install ok installed Priority: optional Section: python Installed-Size: 92 Maintainer: Debian Python Team Architecture: all Source: python-configargparse Version: 1.5.3-1 Depends: python3:any Description: replacement for argparse with config files and environment variables (Python 3) Applications with more than a handful of user-settable options are best configured through a combination of command line args, config files, hard-coded defaults, and in some cases, environment variables. . Python’s command line parsing modules such as argparse have very limited support for config files and environment variables, so this module extends argparse to add these features. . This is the Python 3 module. Homepage: https://github.com/zorro3/ConfigArgParse Package: python3-configobj Status: install ok installed Priority: optional Section: python Installed-Size: 164 Maintainer: Debian Python Team Architecture: all Multi-Arch: foreign Source: configobj Version: 5.0.8-1 Depends: python3-six, python3:any Suggests: python-configobj-doc Description: simple but powerful config file reader and writer for Python 3 ConfigObj is a simple but powerful config file reader and writer: an ini file round tripper. Its main feature is that it is very easy to use, with a straightforward programmer's interface and a simple syntax for config files. It has lots of other features, though: . * Nested sections (subsections), to any level * List values * Multiple line values * String interpolation (substitution) * Integrated with a powerful validation system + including automatic type checking/conversion + and allowing default values + repeated sections * All comments in the file are preserved * The order of keys/sections is preserved * Full Unicode support * Powerful unrepr mode for storing/retrieving Python data-types . This is the Python 3 version of the package. Homepage: http://www.voidspace.org.uk/python/configobj.html Package: python3-cryptography Status: install ok installed Priority: optional Section: python Installed-Size: 2983 Maintainer: Tristan Seligmann Architecture: amd64 Source: python-cryptography Version: 38.0.4-3+deb12u1 Depends: python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3:any, libc6 (>= 2.34), libgcc-s1 (>= 4.2), libssl3 (>= 3.0.0) Suggests: python-cryptography-doc, python3-cryptography-vectors Description: Python library exposing cryptographic recipes and primitives (Python 3) The cryptography library is designed to be a "one-stop-shop" for all your cryptographic needs in Python. . As an alternative to the libraries that came before it, cryptography tries to address some of the issues with those libraries: - Lack of PyPy and Python 3 support. - Lack of maintenance. - Use of poor implementations of algorithms (i.e. ones with known side-channel attacks). - Lack of high level, "Cryptography for humans", APIs. - Absence of algorithms such as AES-GCM. - Poor introspectability, and thus poor testability. - Extremely error prone APIs, and bad defaults. . This package contains the Python 3 version of cryptography. Homepage: https://cryptography.io/ Package: python3-dateutil Status: install ok installed Priority: optional Section: python Installed-Size: 321 Maintainer: Debian Python Team Architecture: all Multi-Arch: foreign Source: python-dateutil Version: 2.8.2-2 Depends: python3-six (>= 1.5), python3:any, tzdata Breaks: khal (<< 1:0.9.10-0.1~), python3-icalendar (<< 4.0.3-2~), python3-vobject (<< 0.9.6.1-0.1~) Description: powerful extensions to the standard Python 3 datetime module It features: . * computing of relative deltas (next month, next year, next monday, last week of month, etc); * computing of relative deltas between two given date and/or datetime objects * computing of dates based on very flexible recurrence rules, using a superset of the iCalendar specification. Parsing of RFC strings is supported as well. * generic parsing of dates in almost any string format * timezone (tzinfo) implementations for tzfile(5) format files (/etc/localtime, /usr/share/zoneinfo, etc), TZ environment string (in all known formats), iCalendar format files, given ranges (with help from relative deltas), local machine timezone, fixed offset timezone, UTC timezone * computing of Easter Sunday dates for any given year, using Western, Orthodox or Julian algorithms . This package provides the Python 3 version of the datetime module. Homepage: https://github.com/dateutil/dateutil Package: python3-dbus Status: install ok installed Priority: optional Section: python Installed-Size: 405 Maintainer: Utopia Maintenance Team Architecture: amd64 Source: dbus-python (1.3.2-4) Version: 1.3.2-4+b1 Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.4), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.16.0) Recommends: python3-gi Suggests: python-dbus-doc Description: simple interprocess messaging system (Python 3 interface) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . This package provides a Python 3 interface to D-Bus. . See the dbus description for more information about D-Bus in general. Homepage: https://www.freedesktop.org/wiki/Software/DBusBindings#Python Package: python3-debian Status: install ok installed Priority: optional Section: python Installed-Size: 591 Maintainer: Debian python-debian Maintainers Architecture: all Source: python-debian Version: 0.1.49 Depends: python3-chardet, python3:any Recommends: python3-apt, zstd Suggests: gpgv Description: Python 3 modules to work with Debian-related data formats This package provides Python 3 modules that abstract many formats of Debian related files. Currently handled are: * Debtags information (debian.debtags module) * debian/changelog (debian.changelog module) * Packages files, pdiffs (debian.debian_support module) * Control files of single or multiple RFC822-style paragraphs, e.g. debian/control, .changes, .dsc, Packages, Sources, Release, etc. (debian.deb822 module) * Raw .deb and .ar files, with (read-only) access to contained files and meta-information Homepage: https://salsa.debian.org/python-debian-team/python-debian Package: python3-debianbts Status: install ok installed Priority: optional Section: python Installed-Size: 53 Maintainer: Bastian Venthur Architecture: all Source: python-debianbts Version: 4.0.1 Depends: python3-pysimplesoap, python3:any Description: Python interface to Debian's Bug Tracking System This package provides the debianbts module, which allows one to query Debian's BTS via it's SOAP-interface and returns the answer in Python's native data types. Package: python3-defusedxml Status: install ok installed Priority: optional Section: python Installed-Size: 113 Maintainer: Debian Python Team Architecture: all Source: defusedxml Version: 0.7.1-2 Depends: python3:any Description: XML bomb protection for Python stdlib modules (for Python 3) The results of an attack on a vulnerable XML library can be fairly dramatic. With just a few hundred bytes of XML data an attacker can occupy several gigabytes of memory within seconds. An attacker can also keep CPUs busy for a long time with a small to medium size request. . This library allows for XML to be parsed in a manner that avoids these pitfalls. . This package contains the module for the Python 3 interpreter. Homepage: https://github.com/tiran/defusedxml Package: python3-dev Status: install ok installed Priority: optional Section: python Installed-Size: 155 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Source: python3-defaults (3.11.2-1) Version: 3.11.2-1+b1 Replaces: python3 (<< 3.9.2-1~), python3.1 (<< 3.1.2+20100706-3) Depends: python3 (= 3.11.2-1+b1), libpython3-dev (= 3.11.2-1+b1), python3.11-dev (>= 3.11.2-1~), python3-distutils (>= 3.11.2-1~), libjs-sphinxdoc (>= 5.2) Breaks: python3 (<< 3.9.2-1~) Description: header files and a static library for Python (default) Header files, a static library and development tools for building Python modules, extending the Python interpreter or embedding Python in applications. . This package is a dependency package, which depends on Debian's default Python 3 version's headers (currently v3.11). Built-Using: sphinx (= 5.3.0-4) Homepage: https://www.python.org/ Package: python3-distro Status: install ok installed Priority: optional Section: python Installed-Size: 83 Maintainer: Debian Python Team Architecture: all Multi-Arch: foreign Source: python-distro Version: 1.8.0-1 Depends: lsb-release, python3:any Description: Linux OS platform information API distro (for: Linux Distribution) provides information about the Linux distribution it runs on, such as a reliable machine-readable ID, or version information. . It is a renewed alternative implementation for Python's original platform.linux_distribution function, but it also provides much more functionality which isn't necessarily Python bound like a command-line interface. . This is the Python 3 version of the library. Homepage: https://github.com/python-distro/distro Package: python3-distutils Status: install ok installed Priority: optional Section: python Installed-Size: 638 Maintainer: Matthias Klose Architecture: all Multi-Arch: foreign Source: python3-stdlib-extensions Version: 3.11.2-3 Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-2) Provides: python3.11-distutils Depends: python3:any (>= 3.10.8-0~), python3:any (<< 3.12), python3-lib2to3 (= 3.11.2-3) Breaks: libpython3.10-stdlib (<< 3.10.0~b1), libpython3.6-stdlib (<< 3.6.5~rc1-3), libpython3.7-stdlib (<< 3.7.0~b2-2), libpython3.8-stdlib (<< 3.8.0~b2-5) Description: distutils package for Python 3.x Distutils package for Python 3.x. This package contains the distutils module from the Python standard library. Package: python3-docopt Status: install ok installed Priority: optional Section: python Installed-Size: 89 Maintainer: Agustin Henze Architecture: all Source: docopt Version: 0.6.2-4.1 Depends: python3:any Description: command-line interface description language (Python3) docopt helps you define an interface for your command-line app and automatically generate a parser for it. Its interface descriptions are based on a formalization of the standard conventions used in help messages and man pages. . This is the Python 3 compatible version of the package. Homepage: http://docopt.org Package: python3-gi Status: install ok installed Priority: optional Section: python Installed-Size: 730 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: allowed Source: pygobject (3.42.2-3) Version: 3.42.2-3+b1 Depends: gir1.2-glib-2.0 (>= 1.48.0), python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.14), libffi8 (>= 3.4), libgirepository-1.0-1 (>= 1.62.0-4~), libgirepository-1.0-1-with-libffi8 (>= 1.62.0-4~), libglib2.0-0 (>= 2.67.3) Description: Python 3 bindings for gobject-introspection libraries GObject is an abstraction layer that allows programming with an object paradigm that is compatible with many languages. It is a part of Glib, the core library used to build GTK+ and GNOME. . This package contains the Python 3 binding generator for libraries that support gobject-introspection, i. e. which ship a gir1.2-- package. With these packages, the libraries can be used from Python 3. Homepage: https://wiki.gnome.org/Projects/PyGObject Package: python3-httplib2 Status: install ok installed Priority: optional Section: python Installed-Size: 133 Maintainer: Debian Python Team Architecture: all Source: python-httplib2 Version: 0.20.4-3 Depends: ca-certificates, python3-pyparsing, python3:any Breaks: python3-wsgi-intercept (<< 1.9.0) Description: comprehensive HTTP client library written for Python3 httplib2.py supports many features left out of other HTTP libraries. * HTTP and HTTPS * Keep-Alive * Authentication * Caching * All Methods * Redirects * Compression * Lost update support * Unit Tested . This package provides module for python3 series. Homepage: https://github.com/httplib2/httplib2 Package: python3-idna Status: install ok installed Priority: optional Section: python Installed-Size: 335 Maintainer: Debian Python Team Architecture: all Multi-Arch: foreign Source: python-idna Version: 3.3-1+deb12u1 Depends: python3:any Description: Python IDNA2008 (RFC 5891) handling (Python 3) A library to support the Internationalised Domain Names in Applications (IDNA) protocol as specified in RFC 5891. This version of the protocol is often referred to as “IDNA2008” and can produce different results from the earlier standard from 2003. . The library is also intended to act as a suitable drop-in replacement for the “encodings.idna” module that comes with the Python standard library but currently only supports the older 2003 specification. . This package contains the module for Python 3. Homepage: https://github.com/kjd/idna Package: python3-jinja2 Status: install ok installed Priority: optional Section: python Installed-Size: 540 Maintainer: Piotr Ożarowski Architecture: all Source: jinja2 Version: 3.1.2-1+deb12u3 Replaces: python-jinja2 (<< 2.11.1-1) Depends: python3-markupsafe (>= 2.0), python3:any Recommends: python3-babel, python3-pkg-resources Suggests: python-jinja2-doc Breaks: python-jinja2 (<< 2.11.1-1) Description: small but fast and easy to use stand-alone template engine Jinja2 is a template engine written in pure Python. It provides a Django inspired non-XML syntax but supports inline expressions and an optional sandboxed environment. . The key-features are: * Configurable syntax. If you are generating LaTeX or other formats with Jinja2 you can change the delimiters to something that integrates better into the LaTeX markup. * Fast. While performance is not the primarily target of Jinja2 it’s surprisingly fast. The overhead compared to regular Python code was reduced to the very minimum. * Easy to debug. Jinja2 integrates directly into the Python traceback system which allows you to debug Jinja2 templates with regular Python debugging helpers. * Secure. It’s possible to evaluate untrusted template code if the optional sandbox is enabled. This allows Jinja2 to be used as templating language for applications where users may modify the template design. Homepage: http://jinja.pocoo.org/ Package: python3-josepy Status: install ok installed Priority: optional Section: python Installed-Size: 105 Maintainer: Debian Let's Encrypt Architecture: all Source: python-josepy Version: 1.13.0-1 Depends: python3-cryptography (>= 1.5), python3-openssl (>= 0.13), python3-pkg-resources, python3:any Description: JOSE implementation for Python 3.x This package is a Python implementation of the standards developed by IETF Javascript Object Signing and Encryption (Active WG), in particular the following RFCs: . - JSON Web Algorithms (JWA) - JSON Web Key (JWK) - JSON Web Signature (JWS) . This package was originally developed as part of the ACME protocol implementation. This is the Python 3 library. Homepage: https://certbot.eff.org/ Package: python3-json-pointer Status: install ok installed Priority: optional Section: python Installed-Size: 45 Maintainer: Debian OpenStack Architecture: all Multi-Arch: foreign Source: python-json-pointer Version: 2.3-2 Depends: python3:any Description: resolve JSON pointers - Python 3.x Python-json-pointer is a small library to resolve JSON pointers according to the IETF draft specification. JSON Pointer defines a string syntax for identifying a specific value within a JavaScript Object Notation (JSON) document. . This package provides the module for Python 3.x. Homepage: https://github.com/stefankoegl/python-json-pointer Package: python3-jsonpatch Status: install ok installed Priority: optional Section: python Installed-Size: 60 Maintainer: Debian OpenStack Architecture: all Source: python-json-patch Version: 1.32-2 Depends: python3-json-pointer, python3:any Description: library to apply JSON patches - Python 3.x Python-json-patch is a Python module (a library) to apply JSON Patches according to the IETF draft specification. . From the IETF site: . JavaScript Object Notation (JSON) [RFC4627] is a common format for the exchange and storage of structured data. HTTP PATCH [RFC5789] extends the Hypertext Transfer Protocol (HTTP) [RFC2616] with a method to perform partial modifications to resources. . JSON Patch is a format (identified by the media type "application/ json-patch") for expressing a sequence of operations to apply to a target JSON document, suitable for use with the HTTP PATCH method. . This format is also potentially useful in other cases when it's necessary to make partial updates to a JSON document. . This package provides the Python 3.x module. Homepage: https://github.com/stefankoegl/python-json-patch Package: python3-jsonschema Status: install ok installed Priority: optional Section: python Installed-Size: 491 Maintainer: Debian OpenStack Architecture: all Source: python-jsonschema Version: 4.10.3-1 Depends: python3-attr, python3-importlib-metadata | python3 (>> 3.8), python3-importlib-resources | python3 (>> 3.9), python3-pyrsistent, python3-typing-extensions | python3 (>> 3.8), python3:any Recommends: python3-idna, python3-json-pointer, python3-rfc3987, python3-uritemplate, python3-webcolors Suggests: python-jsonschema-doc Breaks: python3-json-pointer (<< 1.14) Description: An(other) implementation of JSON Schema (Draft 3, 4, 6, 7) JSON Schema is a specification for a JSON-based format for defining the structure of JSON data. JSON Schema provides a contract for what JSON data is required for a given application and how it can be modified, much like what XML Schema provides for XML. JSON Schema is intended to provide validation, documentation, and interaction control of JSON data. Homepage: https://github.com/Julian/jsonschema Package: python3-jwt Status: install ok installed Priority: optional Section: python Installed-Size: 103 Maintainer: Debian Python Team Architecture: all Source: pyjwt Version: 2.6.0-1+deb12u1 Depends: python3:any Recommends: python3-cryptography Suggests: python3-crypto Description: Python 3 implementation of JSON Web Token PyJWT implements the JSON Web Token draft 01, a way of representing signed content using JSON data structures. . Supported algorithms for cryptographic signing: . * HS256 - HMAC using SHA-256 hash algorithm (default) * HS384 - HMAC using SHA-384 hash algorithm * HS512 - HMAC using SHA-512 hash algorithm * RS256 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-256 hash algorithm * RS384 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-384 hash algorithm * RS512 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-512 hash algorithm . Supported reserved claim names: - "exp" (Expiration Time) Claim . This package contains the Python 3 version of the library. Homepage: https://github.com/jpadilla/pyjwt Package: python3-lazr.restfulclient Status: install ok installed Priority: optional Section: python Installed-Size: 178 Maintainer: Stefano Rivera Architecture: all Source: lazr.restfulclient Version: 0.14.5-1 Depends: python3-httplib2 (>= 0.7.7), python3-lazr.uri, python3-wadllib (>= 1.1.4), python3-distro, python3-importlib-metadata | python3 (>> 3.8), python3-oauthlib, python3-pkg-resources, python3-six, python3:any Description: client for lazr.restful-based web services (Python 3) A programmable client library that takes advantage of the commonalities among lazr.rest web services to provide added functionality on top of wadllib. . This package is for Python 3. Homepage: https://launchpad.net/lazr.restfulclient Package: python3-lazr.uri Status: install ok installed Priority: optional Section: python Installed-Size: 73 Maintainer: Stefano Rivera Architecture: all Source: lazr.uri Version: 1.0.6-3 Depends: python3-importlib-metadata | python3 (>> 3.8), python3-pkg-resources, python3:any Description: library for parsing, manipulating, and generating URIs A self-contained, easily reusable, Python library for parsing, manipulating and generating URIs. With it you can extract parts of a URL, compare URIs to see if one contains another, search for URIs in text, and many other things. . This package contains the library for Python 3.x. Homepage: https://launchpad.net/lazr.uri Package: python3-lib2to3 Status: install ok installed Priority: optional Section: python Installed-Size: 365 Maintainer: Matthias Klose Architecture: all Multi-Arch: foreign Source: python3-stdlib-extensions Version: 3.11.2-3 Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3) Provides: python3.11-lib2to3 Depends: python3:any (>= 3.10.8-0~), python3:any (<< 3.12) Breaks: libpython3.10-stdlib (<< 3.10.0~b1), libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3) Description: Interactive high-level object-oriented language (lib2to3) Python is a high-level, interactive, object-oriented language. It includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains the lib2to3 library, a Python2 to Python3 converter. Package: python3-libtorrent Status: install ok installed Priority: optional Section: python Installed-Size: 4932 Maintainer: Christian Marillat Architecture: amd64 Source: libtorrent-rasterbar (2.0.8-1) Version: 2.0.8-1+b1 Depends: libboost-python1.74.0 (>= 1.74.0), libboost-python1.74.0-py311, libc6 (>= 2.32), libgcc-s1 (>= 3.0), libssl3 (>= 3.0.0), libstdc++6 (>= 11), libtorrent-rasterbar2.0 (>= 2.0.8), python3 (<< 3.12), python3 (>= 3.11~) Description: Python bindings for libtorrent-rasterbar (Python 3) Bittorrent library by Rasterbar Software (Arvid Norberg). libtorrent-rasterbar is a C++ library that aims to be a good alternative to all the other bittorrent implementations around. . The main goals of libtorrent-rasterbar are: * to be cpu efficient * to be memory efficient * to be very easy to use . This package contains Python 3 bindings for the libtorrent-rasterbar library. Homepage: https://libtorrent.org/ Package: python3-markdown Status: install ok installed Priority: optional Section: python Installed-Size: 309 Maintainer: Debian Python Team Architecture: all Source: python-markdown Version: 3.4.1-2 Replaces: python-markdown (<< 3.1.1-4) Depends: python3-importlib-metadata | python3 (>> 3.10), python3:any Recommends: python3-pygments, python3-yaml Suggests: python-markdown-doc Breaks: python-markdown (<< 3.1.1-4), python3-mdx-math (<< 0.7-2~) Description: text-to-HTML conversion library/tool (Python 3 version) Markdown is a text-to-HTML conversion tool for web writers. Markdown allows you to write using an easy-to-read, easy-to-write plain text format, then convert it to structurally valid XHTML (or HTML). . This is a Python implementation of John Gruber's Markdown. The current version of python-markdown implements all Markdown syntax features and fully passes Markdown Test Suite 1.0. It also supports footnotes and attributes. . This package contains all the files needed to use Markdown with Python 3.x. Homepage: https://github.com/Python-Markdown/markdown Package: python3-markupsafe Status: install ok installed Priority: optional Section: python Installed-Size: 53 Maintainer: Piotr Ożarowski Architecture: amd64 Source: markupsafe (2.1.2-1) Version: 2.1.2-1+b1 Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.14) Description: HTML/XHTML/XML string library MarkupSafe is a Python library implementing a unicode subclass that is aware of HTML escaping rules. It can be used to implement automatic string escaping. Homepage: https://palletsprojects.com/p/markupsafe/ Package: python3-minimal Status: install ok installed Priority: optional Section: python Installed-Size: 111 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Source: python3-defaults (3.11.2-1) Version: 3.11.2-1+b1 Depends: dpkg (>= 1.13.20) Pre-Depends: python3.11-minimal (>= 3.11.2-1~) Description: minimal subset of the Python language (default python3 version) This package contains the interpreter and some essential modules. It's used in the boot process for some basic tasks. See /usr/share/doc/python3.11-minimal/README.Debian for a list of the modules contained in this package. Homepage: https://www.python.org/ Cnf-Visible-Pkgname: python3 Package: python3-netifaces Status: install ok installed Priority: optional Section: python Installed-Size: 53 Maintainer: Debian Python Team Architecture: amd64 Multi-Arch: same Source: netifaces (0.11.0-2) Version: 0.11.0-2+b1 Depends: python3 (<< 3.12), python3 (>= 3.11~), libc6 (>= 2.4) Description: portable network interface information - Python 3.x netifaces provides a (hopefully portable-ish) way for Python programmers to get access to a list of the network interfaces on the local machine, and to obtain the addresses of those network interfaces. . This package contains the module for Python 3.x. Homepage: https://alastairs-place.net/projects/netifaces/ Package: python3-oauthlib Status: install ok installed Priority: optional Section: python Installed-Size: 562 Maintainer: Debian Python Team Architecture: all Source: python-oauthlib Version: 3.2.2-1 Depends: python3:any, python3-blinker, python3-cryptography, python3-jwt Description: generic, spec-compliant implementation of OAuth for Python3 OAuthLib is a generic utility which implements the logic of OAuth without assuming a specific HTTP request object. It can be used to graft OAuth support onto HTTP libraries. . OAuth 1 is fully supported per the RFC for both clients and providers. . OAuth 2 client and provider support for: . - Authorization Code Grant - Implicit Grant - Client Credentials Grant - Resource Owner Password Credentials Grant - Refresh Tokens - Bearer Tokens - Draft MAC tokens - Token Revocation - OpenID Connect Authentication . This package contains the Python 3 version of the library. Homepage: https://github.com/idan/oauthlib Package: python3-openssl Status: install ok installed Priority: optional Section: python Installed-Size: 244 Maintainer: Sandro Tosi Architecture: all Source: pyopenssl Version: 23.0.0-1 Depends: python3-cryptography (>= 38.0.0), python3-cryptography (<< 40), python3:any Suggests: python-openssl-doc, python3-openssl-dbg Description: Python 3 wrapper around the OpenSSL library High-level wrapper around a subset of the OpenSSL library, includes . * SSL.Connection objects, wrapping the methods of Python's portable sockets * Callbacks written in Python * Extensive error-handling mechanism, mirroring OpenSSL's error codes . A lot of the object methods do nothing more than calling a corresponding function in the OpenSSL library. . This package contains the Python 3 version of pyopenssl. Homepage: https://pyopenssl.org/ Package: python3-packaging Status: install ok installed Priority: optional Section: python Installed-Size: 149 Maintainer: Matthias Klose Architecture: all Source: python-packaging Version: 23.0-1 Depends: python3:any Description: core utilities for python3 packages These core utilities currently consist of: - Version Handling (PEP 440) - Dependency Specification (PEP 440) Homepage: https://pypi.python.org/pypi/packaging Package: python3-parsedatetime Status: install ok installed Priority: optional Section: python Installed-Size: 184 Maintainer: Debian Python Team Architecture: all Source: parsedatetime Version: 2.6-3 Depends: python3:any Recommends: python3-icu Description: Python 3 module to parse human-readable date/time expressions parsedatetime is able to parse, for example, the following: . * August 25th, 2008 * 25 Aug 2008 * Aug 25 5pm * 5pm August 25 * next saturday * tomorrow * next thursday at 4pm * at 4pm * eod * tomorrow eod * eod tuesday * eoy * eom * in 5 minutes * 5 minutes from now * 5 hours before now * 2 hours before noon * 2 days from tomorrow . This package provides the modules for Python 3. Homepage: https://github.com/bear/parsedatetime Package: python3-passlib Status: install ok installed Priority: optional Section: python Installed-Size: 2048 Maintainer: Debian Python Team Architecture: all Source: python-passlib Version: 1.7.4-3 Depends: python3:any, python3-pkg-resources Description: comprehensive password hashing framework Password hashing library for Python 3, which provides cross-platform implementations of over 20 password hashing algorithms, as well as a framework for managing existing password hashes. It's designed to be useful for a wide range of tasks; from verifying a hash found in /etc/shadow, to providing full-strength password hashing for multi-user applications. Homepage: https://passlib.readthedocs.io Package: python3-pil Status: install ok installed Priority: optional Section: python Installed-Size: 1715 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: pillow Version: 9.4.0-1.1+deb12u1 Replaces: python3-imaging (<< 1.1.7+2.0.0-1.1) Provides: python3-pillow Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, mime-support | python3-pil.imagetk, libc6 (>= 2.14), libfreetype6 (>= 2.10.1), libimagequant0 (>= 2.11.10), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.7), libopenjp2-7 (>= 2.0.0), libraqm0 (>= 0.7.0), libtiff6 (>= 4.0.3), libwebp7 (>= 1.2.4), libwebpdemux2 (>= 1.2.4), libwebpmux3 (>= 1.2.4), libxcb1, zlib1g (>= 1:1.1.4) Recommends: python3-olefile Suggests: python-pil-doc Breaks: python3-imaging (<< 1.1.7+2.0.0-1.1) Conflicts: python3-imaging (<< 1.1.7+2.0.0-1.1) Description: Python Imaging Library (Python3) The Python Imaging Library (PIL) adds an image object to your Python interpreter. You can load images from a variety of file formats, and apply a rich set of image operations to them. . Image Objects: o Bilevel, greyscale, palette, true colour (RGB), true colour with transparency (RGBA). o colour separation (CMYK). o Copy, cut, paste operations. o Flip, transpose, resize, rotate, and arbitrary affine transforms. o Transparency operations. o Channel and point operations. o Colour transforms, including matrix operations. o Image enhancement, including convolution filters. . File Formats: o Full (Open/Load/Save): BMP, EPS (with ghostscript), GIF, IM, JPEG, MSP, PDF, PNG, PPM, TIFF, XBM. o Read only (Open/Load): ARG, CUR, DCX, FLI, FPX, GBR, GD, ICO, IMT, IPTC, MCIDAS, MPEG, PhotoCD, PCX, PIXAR, PSD, TGA, SGI, SUN, TGA, WMF, XPM. o Save only: PDF, EPS (without ghostscript). Homepage: http://python-pillow.github.io/ Package: python3-pip Status: install ok installed Priority: optional Section: python Installed-Size: 6678 Maintainer: Debian Python Team Architecture: all Source: python-pip Version: 23.0.1+dfsg-1 Replaces: python-pip Provides: pip Depends: ca-certificates, python3-distutils, python3-setuptools, python3-wheel, python3:any Recommends: build-essential, python3-dev (>= 3.2) Breaks: python-pip Description: Python package installer pip is the Python package installer. It integrates with virtualenv, doesn't do partial installs, can save package state for replaying, can install from non-egg sources, and can install from version control repositories. . This is the Python 3 version of the package. Homepage: https://pip.pypa.io/en/stable/ Package: python3-pip-whl Status: install ok installed Priority: optional Section: python Installed-Size: 1747 Maintainer: Debian Python Team Architecture: all Multi-Arch: foreign Source: python-pip Version: 23.0.1+dfsg-1 Replaces: python-pip-whl (<< 21.3.1+dfsg-2~) Depends: ca-certificates Breaks: python-pip-whl (<< 21.3.1+dfsg-2~) Description: Python package installer (pip wheel) pip is the Python package installer. It integrates with virtualenv, doesn't do partial installs, can save package state for replaying, can install from non-egg sources, and can install from version control repositories. . This is the support package for the PEP 427 wheel version of the package, required for using pip inside a virtual environment. Homepage: https://pip.pypa.io/en/stable/ Package: python3-pkg-resources Status: install ok installed Priority: optional Section: python Installed-Size: 1052 Maintainer: Matthias Klose Architecture: all Multi-Arch: foreign Source: setuptools Version: 66.1.1-1+deb12u2 Depends: python3:any Suggests: python3-setuptools Description: Package Discovery and Resource Access using pkg_resources The pkg_resources module provides an API for Python libraries to access their resource files, and for extensible applications and frameworks to automatically discover plugins. It also provides runtime support for using C extensions that are inside zipfile-format eggs, support for merging packages that have separately-distributed modules or subpackages, and APIs for managing Python's current "working set" of active packages. Homepage: https://pypi.python.org/pypi/setuptools Package: python3-pycurl Status: install ok installed Priority: optional Section: python Installed-Size: 201 Maintainer: Debian Python Team Architecture: amd64 Source: pycurl Version: 7.45.2-3 Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.15), libcurl3-gnutls (>= 7.88.1) Suggests: libcurl4-gnutls-dev, python-pycurl-doc Description: Python bindings to libcurl (Python 3) This module provides the Python bindings to libcurl. Please refer to the libcurl documentation available in libcurl4-gnutls-dev Debian package. . NOTE: the SSL support is provided by GnuTLS. . This package contains PyCURL for Python 3. Homepage: http://pycurl.sourceforge.net Package: python3-pygments Status: install ok installed Priority: optional Section: python Installed-Size: 4225 Maintainer: Piotr Ożarowski Architecture: all Multi-Arch: foreign Source: pygments Version: 2.14.0+dfsg-1 Replaces: python-pygments (<< 2.3.1+dfsg-4~) Depends: python3-pkg-resources, python3:any Suggests: python-pygments-doc, ttf-bitstream-vera Breaks: python-pygments (<< 2.3.1+dfsg-4~) Description: syntax highlighting package written in Python 3 Pygments aims to be a generic syntax highlighter for general use in all kinds of software such as forum systems, wikis or other applications that need to prettify source code. . Highlights are: * a wide range of common languages and markup formats is supported * special attention is paid to details, increasing quality by a fair amount * support for new languages and formats are added easily * a number of output formats, presently HTML, LaTeX and ANSI sequences * it is usable as a command-line tool and as a library Homepage: https://pygments.org/ Package: python3-pyparsing Status: install ok installed Priority: optional Section: python Installed-Size: 453 Maintainer: Debian Python Team Architecture: all Multi-Arch: foreign Source: pyparsing Version: 3.0.9-1 Depends: python3:any Suggests: python-pyparsing-doc Breaks: python3-translate (<< 3.6.0~), translate-toolkit (<< 3.6.0~) Description: alternative to creating and executing simple grammars - Python 3.x The parsing module is an alternative approach to creating and executing simple grammars, vs. the traditional lex/yacc approach, or the use of regular expressions. The parsing module provides a library of classes that client code uses to construct the grammar directly in Python code. . Here's an example: . from pyparsing import Word, alphas greet = Word(alphas) + "," + Word(alphas) + "!" hello = "Hello, World!" print hello, "->", greet.parseString(hello) . This package contains the Python 3.x version of python-pyparsing. Homepage: https://github.com/pyparsing/pyparsing/ Package: python3-pyrsistent Status: install ok installed Priority: optional Section: python Installed-Size: 250 Maintainer: Debian Python Team Architecture: amd64 Multi-Arch: same Source: pyrsistent (0.18.1-1) Version: 0.18.1-1+b3 Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.14) Description: persistent/functional/immutable data structures for Python Pyrsistent is a number of persistent collections (sometimes referred to as functional data structures). Persistent in the sense that they are immutable. . All methods on a data structure that would normally mutate it instead return a new copy of the structure containing the requested updates. The original structure is left untouched. . The collection types and key features currently implemented are: . * PVector, similar to a python list * PMap, similar to dict * PSet, similar to set * PRecord, a PMap on steroids with fixed fields, optional type and invariant checking and much more * PClass, a Python class fixed fields, optional type and invariant checking and much more * Checked collections, PVector, PMap and PSet with optional type and invariance checks and more * PBag, similar to collections.Counter * PList, a classic singly linked list * PDeque, similar to collections.deque * Immutable object type (immutable) built on the named tuple * freeze and thaw functions to convert between pythons standard collections and pyrsistent collections. * Flexible transformations of arbitrarily complex structures built from PMaps and PVectors. Homepage: https://github.com/tobgu/pyrsistent/ Package: python3-pysimplesoap Status: install ok installed Priority: optional Section: python Installed-Size: 191 Maintainer: Sandro Tosi Architecture: all Source: pysimplesoap Version: 1.16.2-5 Depends: python3-httplib2, python3-pycurl, python3:any Description: simple and lightweight SOAP Library (Python 3) Python simple and lightweight SOAP library for client and server webservices interfaces, aimed to be as small and easy as possible, supporting most common functionality. Initially it was inspired by PHP Soap Extension (mimicking its functionality, simplicity and ease of use), with many advanced features added. . This package contains the Python 3 version of pysimplesoap . Homepage: https://github.com/pysimplesoap/pysimplesoap/ Package: python3-radicale Status: install ok installed Priority: optional Section: python Installed-Size: 431 Maintainer: Jonas Smedegaard Architecture: all Source: radicale Version: 3.1.8-2 Depends: python3-dateutil (>= 2.7.3), python3-defusedxml, python3-passlib, python3-pkg-resources | python3 (>> 3.9), python3-vobject (>= 0.9.6), python3:any Description: simple calendar and addressbook server - python3 module Radicale is a CalDAV (calendar) and CardDAV (contact) server. . Calendars and address books are available for both local and remote access, possibly limited through authentication policies. They can be viewed and edited by calendar and contact clients on mobile phones or computers. . This package contains the Radicale Python 3.x module. Homepage: https://radicale.org/ Package: python3-regex Status: install ok config-files Priority: optional Section: python Installed-Size: 1367 Maintainer: Sandro Tosi Architecture: amd64 Source: python-regex (0.1.20221031-1) Version: 0.1.20221031-1+b1 Config-Version: 0.1.20221031-1+b1 Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.14) Description: alternative regular expression module (Python 3) This new regex implementation is intended eventually to replace Python's current re module implementation. . For testing and comparison with the current 're' module the new implementation is in the form of a module called 'regex'. . This is the Python 3 version of the package. Homepage: https://github.com/mrabarnett/mrab-regex Package: python3-reportbug Status: install ok installed Priority: standard Section: python Installed-Size: 353 Maintainer: Reportbug Maintainers Architecture: all Source: reportbug Version: 12.0.0 Depends: apt, file, python3-apt, python3-debian, python3-debianbts (>= 2.10), python3-requests, sensible-utils, python3:any Suggests: reportbug Description: Python modules for interacting with bug tracking systems reportbug is a tool designed to make the reporting of bugs in Debian and derived distributions relatively painless. . This package includes Python modules which may be reusable by other tools that want to interact with the Debian bug tracking system. . To actually report a bug, install the reportbug package. Package: python3-requests Status: install ok installed Priority: optional Section: python Installed-Size: 232 Maintainer: Debian Python Team Architecture: all Multi-Arch: foreign Source: requests Version: 2.28.1+dfsg-1 Depends: python3-certifi, python3-charset-normalizer, python3-idna, python3-urllib3 (>= 1.21.1), python3:any, ca-certificates, python3-chardet (>= 3.0.2) Suggests: python3-cryptography, python3-idna (>= 2.5), python3-openssl, python3-socks, python-requests-doc Breaks: awscli (<< 1.11.139) Description: elegant and simple HTTP library for Python3, built for human beings Requests allow you to send HTTP/1.1 requests. You can add headers, form data, multipart files, and parameters with simple Python dictionaries, and access the response data in the same way. It's powered by httplib and urllib3, but it does all the hard work and crazy hacks for you. . Features . - International Domains and URLs - Keep-Alive & Connection Pooling - Sessions with Cookie Persistence - Browser-style SSL Verification - Basic/Digest Authentication - Elegant Key/Value Cookies - Automatic Decompression - Unicode Response Bodies - Multipart File Uploads - Connection Timeouts . This package contains the Python 3 version of the library. Homepage: http://python-requests.org Package: python3-rfc3339 Status: install ok installed Priority: optional Section: python Installed-Size: 33 Maintainer: Debian Python Team Architecture: all Source: pyrfc3339 Version: 1.1-4 Depends: python3-tz, python3:any Description: parser and generator of RFC 3339-compliant timestamps (Python 3) pyRFC3339 parses and generates RFC 3339-compliant timestamps using Python datetime.datetime objects. . This is the Python 3 module. Homepage: https://github.com/kurtraschke/pyRFC3339 Package: python3-serial Status: install ok installed Priority: optional Section: python Installed-Size: 459 Maintainer: Matthias Klose Architecture: all Source: pyserial Version: 3.5-1.1 Depends: python3:any Suggests: python3-wxgtk3.0 | python3-wxgtk Description: pyserial - module encapsulating access for the serial port This module encapsulates the access for the serial port. It provides back-ends for standard Python running on Windows, Linux, BSD (possibly any POSIX compliant system). The module named "serial" automatically selects the appropriate back-end. Homepage: https://github.com/pyserial/pyserial Package: python3-setuptools Status: install ok installed Priority: optional Section: python Installed-Size: 2534 Maintainer: Matthias Klose Architecture: all Multi-Arch: foreign Source: setuptools Version: 66.1.1-1+deb12u2 Depends: python3-pkg-resources (= 66.1.1-1+deb12u2), python3-distutils, python3:any Suggests: python-setuptools-doc Description: Python3 Distutils Enhancements Extensions to the python-distutils for large or complex distributions. Homepage: https://pypi.python.org/pypi/setuptools Package: python3-setuptools-whl Status: install ok installed Priority: optional Section: python Installed-Size: 1316 Maintainer: Matthias Klose Architecture: all Source: setuptools Version: 66.1.1-1+deb12u2 Replaces: python-pip-whl (<< 21.3.1+dfsg-2~) Breaks: python-pip-whl (<< 21.3.1+dfsg-2~) Description: Python Distutils Enhancements (wheel package) Extensions to the python-distutils for large or complex distributions. . This is the support package for the PEP 427 wheel version of the package, required for using setuptools inside a virtual environment. Homepage: https://pypi.python.org/pypi/setuptools Package: python3-six Status: install ok installed Priority: optional Section: python Installed-Size: 63 Maintainer: Debian Python Team Architecture: all Multi-Arch: foreign Source: six Version: 1.16.0-4 Depends: python3:any Description: Python 2 and 3 compatibility library Six is a Python 2 and 3 compatibility library. It provides utility functions for smoothing over the differences between the Python versions with the goal of writing Python code that is compatible on both Python versions. Homepage: https://github.com/benjaminp/six Package: python3-software-properties Status: install ok installed Priority: optional Section: python Installed-Size: 143 Maintainer: Julian Andres Klode Architecture: all Source: software-properties Version: 0.99.30-4.1~deb12u1 Depends: gpg, iso-codes, lsb-release, python3, python3-apt, python3-gi, python3-lazr.restfulclient, python3:any Description: manage the repositories that you install software from This software provides an abstraction of the used apt repositories. It allows you to easily manage your distribution and independent software vendor software sources. . This package contains the Python3 module. Package: python3-transmissionrpc Status: install ok installed Priority: optional Section: python Installed-Size: 147 Maintainer: Debian Python Team Architecture: all Source: transmissionrpc Version: 0.11-7 Replaces: python-transmissionrpc (<< 0.11-4) Depends: python3-six (>= 1.1.0), python3:any Suggests: transmission-daemon Breaks: python-transmissionrpc (<< 0.11-4) Description: Transmission RPC client module for Python 3 transmissionrpc is a Python module implementing the JSON-RPC client protocol for the Bittorrent client Transmission. All Transmission features implemented up to version 1.93. . Also, package includes Python script helical.py, with CLI and interactive interfaces, which demonstrates transmissionrpc module usage. . This package contains the Python 3 module. Homepage: https://bitbucket.org/blueluna/transmissionrpc/ Package: python3-tz Status: install ok installed Priority: optional Section: python Installed-Size: 103 Maintainer: Debian Python Team Architecture: all Source: python-tz Version: 2022.7.1-4 Depends: tzdata, python3:any Description: Python3 version of the Olson timezone database python-tz brings the Olson tz database into Python. This library allows accurate and cross platform timezone calculations using Python 2.3 or higher. It also solves the issue of ambiguous times at the end of daylight savings, which you can read more about in the Python Library Reference (datetime.tzinfo). . This package contains the Python 3 version of the library. Homepage: https://pythonhosted.org/pytz/ Package: python3-urllib3 Status: install ok installed Priority: optional Section: python Installed-Size: 456 Maintainer: Debian Python Team Architecture: all Source: python-urllib3 Version: 1.26.12-1+deb12u4 Depends: python3:any, python3-six Recommends: ca-certificates Suggests: python3-brotli, python3-cryptography, python3-idna, python3-openssl, python3-socks Description: HTTP library with thread-safe connection pooling for Python3 urllib3 supports features left out of urllib and urllib2 libraries. . - Re-use the same socket connection for multiple requests (HTTPConnectionPool and HTTPSConnectionPool) (with optional client-side certificate verification). - File posting (encode_multipart_formdata). - Built-in redirection and retries (optional). - Supports gzip and deflate decoding. - Thread-safe and sanity-safe. - Small and easy to understand codebase perfect for extending and building upon. . This package contains the Python 3 version of the library. Homepage: https://urllib3.readthedocs.org Package: python3-userpath Status: install ok installed Priority: optional Section: python Installed-Size: 47 Maintainer: Debian Python Team Architecture: all Source: python-userpath Version: 1.8.0-1 Depends: python3-click, python3:any Recommends: python3-psutil Description: tool for adding locations to the user PATH - Python3 library userpath is a command-line tool and Python library to add custom locations to user PATH. Only user-specific PATH is changed, avoiding the need for elevated privileges. . This package provides the userpath library for Python 3. Homepage: https://github.com/ofek/userpath Package: python3-venv Status: install ok installed Priority: optional Section: python Installed-Size: 6 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Source: python3-defaults (3.11.2-1) Version: 3.11.2-1+b1 Depends: python3.11-venv (>= 3.11.2-1~), python3 (= 3.11.2-1+b1), python3-distutils (>= 3.11.2-1~) Description: venv module for python3 (default python3 version) This package contains the venv module for the Python language (default python3 version). . The venv module provides support for creating lightweight "virtual environments" with their own site directories, optionally isolated from system site directories. Each virtual environment has its own Python binary (which matches the version of the binary that was used to create this environment) and can have its own independent set of installed Python packages in its site directories. . This package is a dependency package, which depends on Debian's default Python 3 version's venv module (currently v3.11). Homepage: https://www.python.org/ Package: python3-vobject Status: install ok installed Priority: optional Section: python Installed-Size: 187 Maintainer: Debian Python Team Architecture: all Source: python-vobject Version: 0.9.6.1-2 Depends: python3-dateutil, python3:any Recommends: python3-tz Description: parse iCalendar and vCards in Python3 Parses iCalendar and vCard files into Python3 data structures, decoding the relevant encodings. Also serializes vobject data structures to valid iCalendar or vCard unicode strings. Homepage: https://eventable.github.io/vobject/ Package: python3-wadllib Status: install ok installed Priority: optional Section: python Installed-Size: 363 Maintainer: Stefano Rivera Architecture: all Source: python-wadllib Version: 1.3.6-4 Depends: python3-importlib-metadata | python3 (>> 3.8), python3-lazr.uri, python3-pkg-resources, python3:any Description: Python 3 library for navigating WADL files The Web Application Description Language (WADL) is an XML vocabulary for describing the capabilities of HTTP resources. wadllib can be used in conjunction with an HTTP library to navigate and manipulate those resources. . This package provides wadllib for Python 3.x. Homepage: https://launchpad.net/wadllib Package: python3-wheel Status: install ok installed Priority: optional Section: python Installed-Size: 131 Maintainer: Debian Python Team Architecture: all Source: wheel Version: 0.38.4-2 Depends: python3-distutils, python3:any Suggests: python3-setuptools Description: built-package format for Python A wheel is a ZIP-format archive with a specially formatted filename and the `.whl` extension. It is designed to contain all the files for a PEP 376 compatible install in a way that is very close to the on-disk format. . The wheel project provides a `bdist_wheel` command for setuptools. Wheel files can be installed with `pip`. . This is the Python 3 compatible package. Homepage: https://github.com/pypa/wheel Package: python3-xlib Status: install ok installed Priority: optional Section: python Installed-Size: 726 Maintainer: Debian Python Team Architecture: all Source: python-xlib Version: 0.33-2 Depends: python3-six (>= 1.10.0), python3:any Description: interface for Python 3 to the X11 protocol python-xlib is a 100% pure Python 3 implementation of the X11 protocol. It currently implements client-side X11R6 fully, supports the resource database, ICCM, and the Shape extension. Homepage: https://github.com/python-xlib/python-xlib Package: python3-yaml Status: install ok installed Priority: optional Section: python Installed-Size: 493 Maintainer: Debian Python Team Architecture: amd64 Multi-Arch: allowed Source: pyyaml (6.0-3) Version: 6.0-3+b2 Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.14), libyaml-0-2 (>= 0.2.2~) Description: YAML parser and emitter for Python3 Python3-yaml is a complete YAML 1.1 parser and emitter for Python3. It can parse all examples from the specification. The parsing algorithm is simple enough to be a reference for YAML parser implementors. A simple extension API is also provided. The package is built using libyaml for improved speed. Homepage: https://github.com/yaml/pyyaml Package: python3.11 Status: install ok installed Priority: optional Section: python Installed-Size: 650 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Version: 3.11.2-6+deb12u7 Depends: python3.11-minimal (= 3.11.2-6+deb12u7), libpython3.11-stdlib (= 3.11.2-6+deb12u7), media-types | mime-support Recommends: ca-certificates Suggests: python3.11-venv, python3.11-doc, binutils Breaks: python3-all (<< 3.6.5~rc1-1), python3-dev (<< 3.6.5~rc1-1), python3-venv (<< 3.6.5-2) Description: Interactive high-level object-oriented language (version 3.11) Python is a high-level, interactive, object-oriented language. Its 3.11 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. Package: python3.11-dev Status: install ok installed Priority: optional Section: python Installed-Size: 616 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Source: python3.11 Version: 3.11.2-6+deb12u7 Depends: python3.11 (= 3.11.2-6+deb12u7), libpython3.11-dev (= 3.11.2-6+deb12u7), libpython3.11 (= 3.11.2-6+deb12u7) Recommends: libc6-dev | libc-dev Description: Header files and a static library for Python (v3.11) Header files, a static library and development tools for building Python (v3.11) modules, extending the Python interpreter or embedding Python (v3.11) in applications. . Maintainers of Python packages should read README.maintainers. Package: python3.11-minimal Status: install ok installed Priority: optional Section: python Installed-Size: 6766 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Source: python3.11 Version: 3.11.2-6+deb12u7 Depends: libpython3.11-minimal (= 3.11.2-6+deb12u7), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0) Pre-Depends: libc6 (>= 2.35) Recommends: python3.11 Suggests: binfmt-support Conflicts: binfmt-support (<< 1.1.2) Description: Minimal subset of the Python language (version 3.11) This package contains the interpreter and some essential modules. It can be used in the boot process for some basic tasks. See /usr/share/doc/python3.11-minimal/README.Debian for a list of the modules contained in this package. Cnf-Visible-Pkgname: python3.11 Package: python3.11-venv Status: install ok installed Priority: optional Section: python Installed-Size: 28 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Source: python3.11 Version: 3.11.2-6+deb12u7 Depends: python3.11 (= 3.11.2-6+deb12u7), python3-pip-whl (>= 22.2), python3-setuptools-whl, python3.11-distutils Breaks: python3-pip (<< 1.5.6-4) Description: Interactive high-level object-oriented language (pyvenv binary, version 3.11) Python is a high-level, interactive, object-oriented language. Its 3.11 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains the pyvenv-3.11 binary. Package: qemu-guest-agent Status: install ok installed Priority: optional Section: otherosfs Installed-Size: 1123 Maintainer: Debian QEMU Team Architecture: amd64 Multi-Arch: foreign Source: qemu (1:7.2+dfsg-7+deb12u18) Version: 1:7.2+dfsg-7+deb12u18+b2 Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.63.3), libnuma1 (>= 2.0.11), libudev1 (>= 183), liburing2 (>= 2.3) Pre-Depends: init-system-helpers (>= 1.54~) Conffiles: /etc/init.d/qemu-guest-agent f61a64ac1e48993023018fd1cff85191 /etc/qemu/fsfreeze-hook 15f6ff42cbc5550a07ee21c2a471d905 Description: Guest-side qemu-system agent QEMU is a fast processor emulator: currently the package supports ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4, SPARC and x86-64 emulation. By using dynamic translation it achieves reasonable speed while being easy to port on new host CPUs. . This package provides a daemon (agent) to run inside qemu-system guests (full system emulation). It communicates with the host using a virtio-serial channel org.qemu.guest_agent.0, and allows one to perform some functions in the guest from the host, including: - querying and setting guest system time - performing guest filesystem sync operation - initiating guest shutdown or suspend to ram - accessing guest files - freezing/thawing guest filesystem operations - others. . Install this package on a system which is running as guest inside qemu virtual machine. It is not used on the host. Homepage: http://www.qemu.org/ Package: qemu-utils Status: install ok installed Priority: optional Section: otherosfs Installed-Size: 6911 Maintainer: Debian QEMU Team Architecture: amd64 Multi-Arch: foreign Source: qemu (1:7.2+dfsg-7+deb12u18) Version: 1:7.2+dfsg-7+deb12u18+b2 Depends: libaio1 (>= 0.3.93), libc6 (>= 2.34), libfuse3-3 (>= 3.2.3), libglib2.0-0 (>= 2.67.3), libgmp10 (>= 2:6.2.1+dfsg1), libgnutls30 (>= 3.7.5), libhogweed6, libnettle8, libnuma1 (>= 2.0.11), libselinux1 (>= 3.1~), liburing2 (>= 2.3), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Recommends: qemu-block-extra (= 1:7.2+dfsg-7+deb12u18+b2) Breaks: qemu-system-common (<< 1:3.1+dfsg-3~) Description: QEMU utilities QEMU is a fast processor emulator: currently the package supports ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4, SPARC and x86-64 emulation. By using dynamic translation it achieves reasonable speed while being easy to port on new host CPUs. . This package provides QEMU related utilities: * qemu-img: QEMU disk image utility * qemu-io: QEMU disk exerciser * qemu-nbd: QEMU disk network block device server Homepage: http://www.qemu.org/ Package: radicale Status: install ok installed Priority: optional Section: net Installed-Size: 154 Maintainer: Jonas Smedegaard Architecture: all Version: 3.1.8-2 Depends: adduser, lsb-base, python3-radicale (= 3.1.8-2), python3:any Pre-Depends: init-system-helpers (>= 1.54~) Recommends: ssl-cert Suggests: apache2, apache2-utils, libapache2-mod-proxy-uwsgi, python3-bcrypt, python3-passlib, uwsgi, uwsgi-plugin-python3 Conffiles: /etc/apache2/conf-available/radicale-uwsgi.conf 340ee91a042cdf74a9312bfa968a2d21 /etc/default/radicale c8e716bb1a4e6e987ba9559dc3457b85 /etc/init.d/radicale 30df0ff4e50721990098527941cd3dc5 /etc/logrotate.d/radicale 8bf19d67ee24a3716d9a1da60c26aec0 /etc/radicale/config a51b5e17e0904049b675f572ec961aac /etc/radicale/rights 97ba46f050be2086aa982258939155d9 /etc/uwsgi/apps-available/radicale.ini d2db6ecf6ca9837e804734975a31db49 Description: simple calendar and addressbook server - daemon Radicale is a CalDAV (calendar) and CardDAV (contact) server. . Calendars and address books are available for both local and remote access, possibly limited through authentication policies. They can be viewed and edited by calendar and contact clients on mobile phones or computers. . This package contains the radicale daemon. . Creating encrypted password files require the package apache2-utils. . Stronger password hashes require the packages python3-passlib and python3-bcrypt. . Serving directly with uWSGI requires the packages uwsgi and uwsgi-plugin-python3. Serving with Apache as front-end and uWSGI only as middleware additionally requires the packages apache2 and libapache2-mod-proxy-uwsgi. Homepage: https://radicale.org/ Package: readline-common Status: install ok installed Priority: important Section: utils Installed-Size: 89 Maintainer: Matthias Klose Architecture: all Multi-Arch: foreign Source: readline Version: 8.2-1.3 Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11) Depends: dpkg (>= 1.15.4) | install-info Suggests: readline-doc Conflicts: libreadline-common, libreadline5 (<< 5.0-11) Description: GNU readline and history libraries, common files The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. Package: redis-server Status: install ok installed Priority: optional Section: database Installed-Size: 183 Maintainer: Chris Lamb Architecture: amd64 Source: redis Version: 5:7.0.15-1~deb12u7 Depends: lsb-base (>= 3.2-14), redis-tools (= 5:7.0.15-1~deb12u7) Pre-Depends: init-system-helpers (>= 1.54~) Conffiles: /etc/default/redis-server 36255dd86b15accc2acd4db7f5e21f05 /etc/init.d/redis-server 2a51c7aa28acf5d7244352e80d0b26ff /etc/logrotate.d/redis-server 420ce1e139dd2044c4a3e44a2781a0a3 /etc/redis/redis.conf 3f070d8d3ef55ec295f647bec0cd3326 Description: Persistent key-value database with network interface Redis is a key-value database in a similar vein to memcache but the dataset is non-volatile. Redis additionally provides native support for atomically manipulating and querying data structures such as lists and sets. . The dataset is stored entirely in memory and periodically flushed to disk. Homepage: https://redis.io/ Package: redis-tools Status: install ok installed Priority: optional Section: database Installed-Size: 5837 Maintainer: Chris Lamb Architecture: amd64 Source: redis Version: 5:7.0.15-1~deb12u7 Replaces: redis-server (<< 2:2.6.16-1) Depends: adduser, libatomic1 (>= 4.8), libc6 (>= 2.34), libjemalloc2 (>= 3.5.0), liblzf1 (>= 1.5), libssl3 (>= 3.0.0), libsystemd0 Suggests: ruby-redis Breaks: redis-server (<< 2:2.6.16-1) Description: Persistent key-value database with network interface (client) Redis is a key-value database in a similar vein to memcache but the dataset is non-volatile. Redis additionally provides native support for atomically manipulating and querying data structures such as lists and sets. . This package contains the command line client and other tools. Homepage: https://redis.io/ Package: reportbug Status: install ok installed Priority: standard Section: utils Installed-Size: 190 Maintainer: Reportbug Maintainers Architecture: all Version: 12.0.0 Depends: apt, python3-reportbug (= 12.0.0), sensible-utils, python3:any Suggests: claws-mail (>= 3.8.0), debconf, debsums (>= 2.0.47), default-mta | postfix | exim4 | mail-transport-agent, dlocate, emacs-bin-common, file (>> 1.30), gnupg | pgp, python3-urwid, reportbug-gtk (= 12.0.0), xdg-utils Conffiles: /etc/reportbug.conf 705322b9a62d3b68f7edde9beeb31522 Description: reports bugs in the Debian distribution reportbug is a tool designed to make the reporting of bugs in Debian and derived distributions relatively painless. Its features include: . * Integration with many mail user agents. * Access to outstanding bug reports to make it easier to identify whether problems have already been reported. * Automatic checking for newer versions of packages. * Optional automatic verification of integrity of packages via debsums. * Support for following-up on outstanding reports. * Optional PGP/GnuPG integration. . Bug reporting in Debian relies on email; reportbug can use a local mail transport agent (like exim or sendmail), submit directly through an external mail server, or pass messages to an installed mail user agent (e.g., mutt) for submission. . This package also includes the "querybts" script for browsing the Debian bug tracking system. Package: resolvconf Status: install ok installed Priority: optional Section: net Installed-Size: 180 Maintainer: resolvconf team Architecture: all Version: 1.91+nmu1 Depends: lsb-base, debconf (>= 0.5) | debconf-2.0 Breaks: dhcp3-client (<< 4.1.1-P1-15+squeeze1), dnscache-run Enhances: dhcpcd, dnsmasq, ifupdown, isc-dhcp-client, libc6, network-manager, nscd, pdnsd, ppp, pump, udhcpc Conffiles: /etc/resolvconf/update.d/dnscache newconffile remove-on-upgrade /etc/dhcp/dhclient-enter-hooks.d/resolvconf 586788af39de093b8145ea9d9fc43875 /etc/init.d/resolvconf 98b70e5ff3e146b633ba3cbe1feeec20 /etc/network/if-down.d/resolvconf e7b9537b50829454c9c9c583b5ace757 /etc/network/if-up.d/000resolvconf e7df1adfba699cdf1594eb33528b1490 /etc/ppp/ip-down.d/000resolvconf e50ecd8f5226bebba46e1eab652a4169 /etc/ppp/ip-up.d/000resolvconf 8cda84dd75e71467394378a6a71edcd6 /etc/resolvconf/interface-order 9431a58c5e7d90e7e1835b290172e168 /etc/resolvconf/resolv.conf.d/base d41d8cd98f00b204e9800998ecf8427e /etc/resolvconf/resolv.conf.d/head 287f6b2e5e81a8830857af92bf26d7ec /etc/resolvconf/update.d/libc 1abffebc4024b0f3eb67932a37ab0da8 Description: name server information handler Resolvconf is a framework for keeping up to date the system's information about name servers. It sets itself up as the intermediary between programs that supply this information (such as ifup and ifdown, DHCP clients, the PPP daemon and local name servers) and programs that use this information (such as DNS caches and resolver libraries). . This package may require some manual configuration. Please read the README file for detailed instructions. Homepage: https://salsa.debian.org/debian/resolvconf Package: rpcsvc-proto Status: install ok installed Priority: optional Section: libs Installed-Size: 246 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1.4.3-1 Replaces: libc-dev-bin (<< 2.31-14), libc6-dev (<< 2.31-14) Depends: libc6 (>= 2.34) Breaks: libc-dev-bin (<< 2.31-14), libc6-dev (<< 2.31-14) Description: RPC protocol compiler and definitions rpcgen is a tool that generates C code to implement an RPC protocol. The input to rpcgen is a language similar to C known as RPC Language (Remote Procedure Call Language). . This package also includes several rpcsvc header files and RPC protocol definitions from SunRPC sources that were previously shipped by glibc. Homepage: https://github.com/thkukuk/rpcsvc-proto Package: rsync Status: install ok installed Priority: optional Section: net Installed-Size: 793 Maintainer: Paul Slootman Architecture: amd64 Multi-Arch: foreign Version: 3.2.7-1+deb12u5 Depends: lsb-base, libacl1 (>= 2.2.23), libc6 (>= 2.34), liblz4-1 (>= 0.0~r130), libpopt0 (>= 1.14), libssl3 (>= 3.0.0), libxxhash0 (>= 0.8.0), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4) Pre-Depends: init-system-helpers (>= 1.54~) Suggests: openssh-client, openssh-server, python3, python3-braceexpand Conffiles: /etc/default/rsync b8fd9efa75e2bda2583b0d7c0892a073 /etc/init.d/rsync 59aa13cd1a70ff254a2991ad0c522ea5 Description: fast, versatile, remote (and local) file-copying tool rsync is a fast and versatile file-copying tool which can copy locally and to/from a remote host. It offers many options to control its behavior, and its remote-update protocol can minimize network traffic to make transferring updates between machines fast and efficient. . It is widely used for backups and mirroring and as an improved copy command for everyday use. . This package provides both the rsync command line tool and optional daemon functionality. Homepage: https://rsync.samba.org/ Package: runit-helper Status: install ok installed Priority: optional Section: admin Installed-Size: 19 Maintainer: Lorenzo Puliti Architecture: all Multi-Arch: foreign Source: dh-runit Version: 2.15.2 Description: dh-runit implementation detail runit-helper provides code, which actually perform actions on system users on behalf of dh-runit package. This separation allows packages take advantage of improvement or fixes in 'dh-runit' without rebuilding. . This package is implementation detail of 'dh-runit'. It should never be installed manually. No assumption about its content can be made. Homepage: https://salsa.debian.org/debian/dh-runit Package: sed Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 987 Maintainer: Clint Adams Architecture: amd64 Multi-Arch: foreign Version: 4.9-1+deb12u1 Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~) Description: GNU stream editor for filtering/transforming text sed reads the specified files or the standard input if no files are specified, makes editing changes according to a list of commands, and writes the results to the standard output. Homepage: https://www.gnu.org/software/sed/ Package: sensible-utils Status: install ok installed Priority: important Section: utils Installed-Size: 56 Maintainer: Anibal Monsalve Salazar Architecture: all Multi-Arch: foreign Version: 0.0.17+nmu1 Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~) Description: Utilities for sensible alternative selection This package provides a number of small utilities which are used by programs to sensibly select and spawn an appropriate browser, editor, or pager. . The specific utilities included are: sensible-browser sensible-editor sensible-pager Package: sgml-base Status: install ok installed Priority: optional Section: text Installed-Size: 70 Maintainer: Debian QA Group Architecture: all Multi-Arch: foreign Version: 1.31 Pre-Depends: dpkg (>= 1.16.4) Suggests: sgml-base-doc Description: SGML infrastructure and SGML catalog file support This package creates the SGML infrastructure directories and provides SGML catalog file support in compliance with the current Debian SGML Policy draft: . * infrastructure directories: - /etc/sgml - /usr/share/sgml/{declaration,dtd,entities,misc,stylesheet} - /usr/share/local/sgml/{declaration,dtd,entities,misc,stylesheet} . * update-catalog(8): tool for maintaining the root SGML catalog file and the package SGML catalog files in the '/etc/sgml' directory. Package: shared-mime-info Status: install ok installed Priority: optional Section: misc Installed-Size: 5030 Maintainer: Debian freedesktop.org maintainers Architecture: amd64 Multi-Arch: foreign Version: 2.2-1 Depends: libc6 (>= 2.33), libglib2.0-0 (>= 2.35.9), libxml2 (>= 2.7.4) Description: FreeDesktop.org shared MIME database and spec This is the shared MIME-info database from the X Desktop Group. It is required by any program complying to the Shared MIME-Info Database spec, which is also included in this package. . At this time at least ROX, GNOME, KDE and Xfce use this database. Homepage: https://freedesktop.org/wiki/Software/shared-mime-info Package: shim-helpers-amd64-signed Status: install ok installed Priority: optional Section: admin Installed-Size: 933 Maintainer: Debian EFI team Architecture: amd64 Version: 1+15.8+1~deb12u1 Replaces: shim (<< 15+1533136590.3beb971-3~), shim-signed (<< 1.29) Depends: shim-unsigned (>= 15.8-1~deb12u1) Breaks: shim-signed (<< 1.29) Conflicts: shim (<< 15+1533136590.3beb971-3~) Description: boot loader to chain-load signed boot loaders (signed by Debian) This package provides a minimalist boot loader which allows verifying signatures of other UEFI binaries against either the Secure Boot DB/DBX or against a built-in signature database. Its purpose is to allow a small, infrequently-changing binary to be signed by the UEFI CA, while allowing an OS distributor to revision their main bootloader independently of the CA. . This package contains the MOK manager and fall-back manager signed by the Debian UEFI CA to be used by shim-signed. Built-Using: shim (= 15.8-1~deb12u1) Package: shim-signed Status: install ok installed Priority: optional Section: utils Installed-Size: 960 Maintainer: Debian EFI Team Architecture: amd64 Multi-Arch: same Source: shim-signed (1.44~1+deb12u1) Version: 1.44~1+deb12u1+15.8-1~deb12u1 Depends: shim-signed-common (>= 1.44~1+deb12u1), grub-efi-amd64-bin, shim-helpers-amd64-signed (>= 1+15.8+1~deb12u1), grub2-common (>= 2.06-13+deb12u1) Description: Secure Boot chain-loading bootloader (Microsoft-signed binary) This package provides a minimalist boot loader which allows verifying signatures of other UEFI binaries against either the Secure Boot DB/DBX or against a built-in signature database. Its purpose is to allow a small, infrequently-changing binary to be signed by the UEFI CA, while allowing an OS distributor to revision their main bootloader independently of the CA. . This package contains the version of the bootloader binary signed by the Microsoft UEFI CA. Built-Using: shim (= 15.8-1~deb12u1) Package: shim-signed-common Status: install ok installed Priority: optional Section: utils Installed-Size: 50 Maintainer: Debian EFI Team Architecture: all Multi-Arch: foreign Source: shim-signed (1.44~1+deb12u1) Version: 1.44~1+deb12u1+15.8-1~deb12u1 Replaces: shim-signed (<< 1.32+15+1533136590.3beb971-5) Depends: debconf (>= 0.5) | debconf-2.0, mokutil Breaks: shim-signed (<< 1.32+15+1533136590.3beb971-5) Description: Secure Boot chain-loading bootloader (common helper scripts) This package provides a minimalist boot loader which allows verifying signatures of other UEFI binaries against either the Secure Boot DB/DBX or against a built-in signature database. Its purpose is to allow a small, infrequently-changing binary to be signed by the UEFI CA, while allowing an OS distributor to revision their main bootloader independently of the CA. . This package contains common helper scripts for all versions of the shim-signed package. Package: shim-unsigned Status: install ok installed Priority: optional Section: admin Installed-Size: 1875 Maintainer: Debian EFI team Architecture: amd64 Multi-Arch: same Source: shim Version: 15.8-1~deb12u1 Replaces: shim (<< 15+1533136590.3beb971-3~) Conflicts: shim (<< 15+1533136590.3beb971-3~) Description: boot loader to chain-load signed boot loaders under Secure Boot This package provides a minimalist boot loader which allows verifying signatures of other UEFI binaries against either the Secure Boot DB/DBX or against a built-in signature database. Its purpose is to allow a small, infrequently-changing binary to be signed by the UEFI CA, while allowing an OS distributor to revision their main bootloader independently of the CA. Package: software-properties-common Status: install ok installed Priority: optional Section: admin Installed-Size: 450 Maintainer: Julian Andres Klode Architecture: all Source: software-properties Version: 0.99.30-4.1~deb12u1 Replaces: python-software-properties (<< 0.85), python3-software-properties (<< 0.85) Depends: ca-certificates, gir1.2-glib-2.0, gir1.2-packagekitglib-1.0 (>= 1.1.0-2), packagekit, python-apt-common (>= 0.9), python3, python3-dbus, python3-gi, python3-software-properties (= 0.99.30-4.1~deb12u1), python3:any Breaks: python-software-properties (<< 0.85), python3-software-properties (<< 0.85) Conffiles: /etc/dbus-1/system.d/com.ubuntu.SoftwareProperties.conf cc3c01a5b5e8e05d40c9c075f44c43ea Description: manage the repositories that you install software from (common) This software provides an abstraction of the used apt repositories. It allows you to easily manage your distribution and independent software vendor software sources. . This package contains the common files for software-properties like the D-Bus backend. Package: sogo Status: install ok installed Priority: optional Section: mail Installed-Size: 6995 Maintainer: Debian SOGo Maintainers Architecture: amd64 Version: 5.8.0-2+deb12u3 Depends: gnustep-base-runtime (>= 1.28.0), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libcurl4 (>= 7.16.2), libgcc-s1 (>= 3.0), libglib2.0-0 (>= 2.14.0), libgnustep-base1.28 (>= 1.28.0), liblasso3 (>= 2.3.5), libmemcached11 (>= 1.1.4), liboath0 (>= 1.12.0), libobjc4 (>= 4.6), libsbjson2.3, libsodium23 (>= 1.0.13), libsope1 (>= 5.8.0), libssl3 (>= 3.0.0), libytnef0, libzip4 (>= 1.0), systemd | tmpreaper, sogo-common (= 5.8.0-2+deb12u3), adduser, zip, lsb-base (>= 3.0-6), memcached Pre-Depends: init-system-helpers (>= 1.54~) Suggests: postgresql | default-mysql-server | virtual-mysql-server Conffiles: /etc/cron.d/sogo c392ae3e5a6b76e58aebce5147524290 /etc/cron.daily/sogo cf5b80f04e12731afaeb99c2d83f47e2 /etc/default/sogo 986e4c2506f01ca3531f04d066a49b3c /etc/init.d/sogo ff8589e3c59833760e73bfeb57bf7bf7 /etc/logrotate.d/sogo ab60201c92fa68f6d7ddae04f800d1cf /etc/sogo/sogo.conf dc2f14d7500e3e9ff81eb7cf828f3ff6 Description: Scalable groupware server SOGo is a groupware server built around OpenGroupware.org (OGo) and the SOPE application server with focus on scalability. It has many feature enhancements: . * CalDAV and GroupDAV compliance * full handling of vCard as well as vCalendar/iCalendar formats * support for folder sharing and ACLs . The Web interface has been rewritten in an AJAX fashion to provide a faster UI for the users, consistency in look and feel with the Mozilla applications, and to reduce the load of the transactions on the server. . This package contains the SOGo daemon. Homepage: https://sogo.nu/ Package: sogo-common Status: install ok installed Priority: optional Section: mail Installed-Size: 46052 Maintainer: Debian SOGo Maintainers Architecture: all Multi-Arch: foreign Source: sogo Version: 5.8.0-2+deb12u3 Suggests: httpd Description: Scalable groupware server - common files SOGo is a groupware server built around OpenGroupware.org (OGo) and the SOPE application server with focus on scalability. . This package contains the architecture-indepedent files, including all the files that are needed on the web proxy. Homepage: https://sogo.nu/ Package: spamassassin Status: install ok installed Priority: optional Section: mail Installed-Size: 4925 Maintainer: Noah Meyerhans Architecture: all Multi-Arch: foreign Version: 4.0.1-1~deb12u1 Provides: libmail-spamassassin-perl Depends: perl, libhtml-parser-perl, libsocket6-perl, adduser, libsys-hostname-long-perl, libarchive-tar-perl, libnet-dns-perl, libnetaddr-ip-perl, libhttp-date-perl, libmail-dkim-perl, libio-string-perl, lsb-base (>= 3.0-6), libwww-perl | curl | w3m Recommends: spamc, sa-compile (= 4.0.1-1~deb12u1), libmail-spf-perl, libsys-syslog-perl, gnupg, libbsd-resource-perl, libmail-dmarc-perl Suggests: razor, libio-socket-ssl-perl, libdbi-perl, pyzor, libcompress-zlib-perl, libencode-detect-perl, libgeoip2-perl, libnet-patricia-perl Conffiles: /etc/cron.daily/spamassassin 6e8609c4e24fb8aa174c02631ff4c887 /etc/spamassassin/65_debian.cf e8330ff50b858cd750053c8b8677b967 /etc/spamassassin/init.pre e4ad7ff878f1f2e8b9924063d86c25d3 /etc/spamassassin/local.cf 8e42a77cad3902cac39dc45fd4878366 /etc/spamassassin/v310.pre edadff48d1ad5cd5f2429b0dc7b0b23f /etc/spamassassin/v312.pre 92e67cf5033226c448670756e931121e /etc/spamassassin/v320.pre be4b0a1783350c94609e6843c8195109 /etc/spamassassin/v330.pre d4ae657f84f6663fea400857b27dd803 /etc/spamassassin/v340.pre 337b4ae54ec9f95839d156d144365879 /etc/spamassassin/v341.pre a66d09b07b29591b3941a7c2da354f59 /etc/spamassassin/v342.pre e6fa6c4fe3c628d48ef72352095f3b75 /etc/spamassassin/v343.pre 3a31144bc8572571e73ac86e4bc6275e /etc/spamassassin/v400.pre 228d5d7d132425780419b9865a3d517e /etc/spamassassin/v401.pre eefce03035e3c0dcc66faffb3213f7eb Description: Perl-based spam filter using text analysis SpamAssassin is a very powerful and fully configurable spam filter with numerous features including automatic white-listing, RBL testing, Bayesian analysis, header and body text analysis. It is designed to be called from a user's .procmail or .forward file, but can also be integrated into a Mail Transport Agent (MTA). . If you use spamassassin on a moderately high-volume mail server, you may which to consider installing the spamc and spamd packages, which provide a daemonized variant of spamassassin that avoids the need to start a full perl runtime for each message processed. Homepage: https://www.spamassassin.org/ Package: spamc Status: install ok installed Priority: optional Section: mail Installed-Size: 117 Maintainer: Noah Meyerhans Architecture: amd64 Multi-Arch: foreign Source: spamassassin Version: 4.0.1-1~deb12u1 Depends: libc6 (>= 2.34), libssl3 (>= 3.0.0) Recommends: spamd Description: Client for SpamAssassin spam filtering daemon spamc is the client to communicate with spamd, the daemonized form of SpamAssassin (see the spamd package). It is written in C for maximum speed and minimum loading overhead. . spamc is quite useful for integrating spamassassin into an MTA or into a .procmailrc file because of its speed. . This package is useless unless you have spamassassin installed, either on this machine or another local machine (i.e. a mail server). Homepage: https://www.spamassassin.org/ Package: speedtest-cli Status: install ok installed Priority: optional Section: utils Installed-Size: 104 Maintainer: Jonathan Carter Architecture: all Version: 2.1.3-2 Depends: python3:any, python3-pkg-resources, ca-certificates Description: Command line interface for testing internet bandwidth using speedtest.net Speedtest.net is a webservice that allows you to test your broadband connection by downloading a file from one of many Speedtest.net servers from around the world. . This utility allows you to use the Speedtest.net service from the command line. . Note: This tool accesses speedtest.net over http, while the web-based client uses websockets. This tool has shown to become increasingly inacurate with high-speed connections. For more information, see the readme on: https://github.com/sivel/speedtest-cli Homepage: https://github.com/sivel/speedtest-cli/ Package: sqlite3 Status: install ok installed Priority: optional Section: database Installed-Size: 533 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: foreign Version: 3.40.1-2+deb12u2 Depends: libc6 (>= 2.34), libreadline8 (>= 6.0), libsqlite3-0 (= 3.40.1-2+deb12u2), zlib1g (>= 1:1.2.0) Suggests: sqlite3-doc Description: Command line interface for SQLite 3 SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Homepage: https://www.sqlite.org/ Package: sse3-support Status: install ok config-files Priority: optional Section: misc Installed-Size: 17 Maintainer: Bastien Roucariès Architecture: amd64 Multi-Arch: foreign Source: isa-support Version: 15.1 Config-Version: 15.1 Pre-Depends: isa-support (= 15.1) Description: CPU feature checking - require SSE3 The packages in the isa-support family probe for microprocessor Instruction Set Architecture features such as SSE3. By refusing to install on machines lacking a required feature, they allow ISA requirements to be handled in terms of package dependencies. . This is a mostly dummy package which checks for SSE3 and refuses to install on unsupported hardware. . Streaming SIMD Extensions (SSE) is a single instruction, multiple data (SIMD) instruction set extension. . SSE3, also called PNI (Prescott New Instructions), is an incremental upgrade to SSE2, adding a handful of new operations useful for processing media. It is available on almost any 64-bit-capable processor except for some early AMD models (Sledgehammer and Clawhammer), but is not available on most 32-bit-only hardware. Package: ssh-import-id Status: install ok installed Priority: optional Section: misc Installed-Size: 52 Maintainer: Andrew Starr-Bochicchio Architecture: all Version: 5.10-1 Depends: ca-certificates, openssh-client, python3-requests (>= 1.1.0), python3-distro, wget, python3:any Recommends: openssh-server Conffiles: /etc/ssh/ssh_import_id 8bfa390040fbeeae70bec14f2dccaf11 Description: securely retrieve an SSH public key and install it locally This utility will securely contact a public keyserver (Launchpad.net by default, but Github.com is also supported), retrieve one or more user's public keys, and append these to the current user's ~/.ssh/authorized_keys file. Homepage: http://launchpad.net/ssh-import-id Package: ssl-cert Status: install ok installed Priority: optional Section: utils Installed-Size: 64 Maintainer: Debian Apache Maintainers Architecture: all Multi-Arch: foreign Version: 1.1.2 Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser Description: simple debconf wrapper for OpenSSL This package enables unattended installs of packages that need to create SSL certificates. . It is a simple wrapper for OpenSSL's certificate request utility that feeds it with the correct user variables. Package: sudo Status: install ok installed Priority: optional Section: admin Installed-Size: 6055 Maintainer: Sudo Maintainers Architecture: amd64 Version: 1.9.13p3-1+deb12u4 Replaces: sudo-ldap Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.0.2), libpam-modules Pre-Depends: init-system-helpers (>= 1.54~) Conflicts: sudo-ldap Conffiles: /etc/init.d/sudo 4fd40c92739a3bb2242df7cc6af126df /etc/pam.d/sudo 7fa5090826481c517f23faa1e21c77a8 /etc/pam.d/sudo-i 95199b1f3d5a60bcf98058d9f8b70e70 /etc/sudo.conf 8c714b777580faea54a2eb6d5f17ad1d /etc/sudo_logsrvd.conf ad0ba586da300ae3ba46312ad744a6e2 /etc/sudoers da8bee36494c904ba767f0dd58920878 /etc/sudoers.d/README 44c75ff004a18eeefdde4c998914d6d3 Description: Provide limited super user privileges to specific users Sudo is a program designed to allow a sysadmin to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow people to get their work done. . This version is built with minimal shared library dependencies, use the sudo-ldap package instead if you need LDAP support for sudoers. Homepage: https://www.sudo.ws/ Package: systemd Status: install ok installed Priority: important Section: admin Installed-Size: 9668 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: foreign Version: 252.39-1~deb12u2 Provides: systemd-sysusers (= 252.39-1~deb12u2), systemd-tmpfiles (= 252.39-1~deb12u2) Depends: libacl1 (>= 2.2.23), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.24.2), libcryptsetup12 (>= 2:2.4), libfdisk1 (>= 2.33), libkmod2 (>= 15), libp11-kit0 (>= 0.23.18.1), libseccomp2 (>= 2.3.1), libsystemd-shared (= 252.39-1~deb12u2), libsystemd0 (= 252.39-1~deb12u2), mount Pre-Depends: libblkid1 (>= 2.24), libc6 (>= 2.34), libcap2 (>= 1:2.10), libgcrypt20 (>= 1.10.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614), libmount1 (>= 2.30), libselinux1 (>= 3.1~), libssl3 (>= 3.0.0), libzstd1 (>= 1.5.2) Recommends: default-dbus-system-bus | dbus-system-bus, systemd-timesyncd | time-daemon Suggests: systemd-container, systemd-homed, systemd-userdbd, systemd-boot, systemd-resolved, libfido2-1, libqrencode4, libtss2-esys-3.0.2-0, libtss2-mu0, libtss2-rc0, polkitd | policykit-1 Breaks: less (<< 563), resolvconf (<< 1.83~), sicherboot (<< 0.1.6), udev (<< 247~) Conflicts: consolekit, libpam-ck-connector, systemd-shim Conffiles: /etc/systemd/journald.conf d2187d732ab2911016a4d4017c155dbb /etc/systemd/logind.conf 8276eeafa20aa65e6a5dca3bdcddafb4 /etc/systemd/networkd.conf f461eed370e565cbe9890dd6b2c43996 /etc/systemd/pstore.conf ea1d43113c41edaacb39180d60a50b08 /etc/systemd/sleep.conf 72e9b6cd3c3c7c2abbe19564771336d0 /etc/systemd/system.conf 36ace4ee4543e277db35948826aa6979 /etc/systemd/user.conf a908ebf52cb61e955dcf6b6662666c8d Description: system and service manager systemd is a system and service manager for Linux. It provides aggressive parallelization capabilities, uses socket and D-Bus activation for starting services, offers on-demand starting of daemons, keeps track of processes using Linux control groups, maintains mount and automount points and implements an elaborate transactional dependency-based service control logic. . Installing the systemd package will not switch your init system unless you boot with init=/lib/systemd/systemd or install systemd-sysv in addition. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: systemd-sysv Status: install ok installed Priority: important Section: admin Installed-Size: 74 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: foreign Source: systemd Version: 252.39-1~deb12u2 Replaces: sysvinit-core Pre-Depends: systemd Recommends: libpam-systemd, libnss-systemd Conflicts: file-rc, systemd-shim, sysvinit-core Description: system and service manager - SysV compatibility symlinks This package provides manual pages and compatibility symlinks needed for systemd to replace sysvinit. . Installing systemd-sysv will overwrite /sbin/init with a symlink to systemd. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: systemd-timesyncd Status: install ok installed Priority: standard Section: admin Installed-Size: 148 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: foreign Source: systemd Version: 252.39-1~deb12u2 Replaces: systemd (<< 245.4-2~), time-daemon Provides: time-daemon Depends: libc6 (>= 2.34), libsystemd-shared (= 252.39-1~deb12u2), systemd Breaks: systemd (<< 245.4-2~) Conflicts: time-daemon Conffiles: /etc/dhcp/dhclient-exit-hooks.d/timesyncd c66e563f4050725592e2da20a4e1bfef /etc/systemd/timesyncd.conf 9bca5bc8be90d2921301a24084ffcd55 Description: minimalistic service to synchronize local time with NTP servers The package contains the systemd-timesyncd system service that may be used to synchronize the local system clock with a remote Network Time Protocol server. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: sysvinit-utils Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 100 Maintainer: Debian sysvinit maintainers Architecture: amd64 Multi-Arch: foreign Source: sysvinit Version: 3.06-4 Replaces: lsb-base Provides: lsb-base (= 11.1.0) Depends: libc6 (>= 2.34) Conflicts: lsb-base (<< 11.3~) Description: System-V-like utilities This package contains the important System-V-like utilities. . Specifically, this package includes: init-d-script, fstab-decode, killall5, pidof . It also contains the library scripts sourced by init-d-script and other initscripts that were formally in lsb-base. Homepage: https://github.com/slicer69/sysvinit Package: tar Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 3144 Maintainer: Janos Lenart Architecture: amd64 Multi-Arch: foreign Version: 1.34+dfsg-1.2+deb12u1 Replaces: cpio (<< 2.4.2-39) Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~) Suggests: bzip2, ncompress, xz-utils, tar-scripts, tar-doc Breaks: dpkg-dev (<< 1.14.26) Conflicts: cpio (<= 2.4.2-38) Description: GNU version of the tar archiving utility Tar is a program for packaging a set of files as a single archive in tar format. The function it performs is conceptually similar to cpio, and to things like PKZIP in the DOS world. It is heavily used by the Debian package management system, and is useful for performing system backups and exchanging sets of files with others. Homepage: https://www.gnu.org/software/tar/ Package: task-english Status: install ok installed Priority: optional Section: tasks Installed-Size: 6 Maintainer: Debian Install System Team Architecture: all Source: tasksel Version: 3.73 Depends: tasksel (= 3.73), locales Recommends: util-linux-locales, ibritish, iamerican Description: General English environment This task installs packages and documentation in British and American English to help English speaking people use Debian. Package: task-ssh-server Status: install ok installed Priority: optional Section: tasks Installed-Size: 6 Maintainer: Debian Install System Team Architecture: all Source: tasksel Version: 3.73 Depends: tasksel (= 3.73), openssh-server Recommends: openssh-client Description: SSH server This task sets up your system to be remotely accessed through SSH connections. Package: tasksel Status: install ok installed Priority: optional Section: admin Installed-Size: 347 Maintainer: Debian Install System Team Architecture: all Version: 3.73 Depends: debconf (>= 0.5) | debconf-2.0, liblocale-gettext-perl, apt, tasksel-data Pre-Depends: debconf | cdebconf Conflicts: base-config (<< 2.32) Description: tool for selecting tasks for installation on Debian systems This package provides 'tasksel', a simple interface for users who want to configure their system to perform a specific task. Package: tasksel-data Status: install ok installed Priority: important Section: admin Installed-Size: 211 Maintainer: Debian Install System Team Architecture: all Source: tasksel Version: 3.73 Depends: tasksel (= 3.73) Recommends: laptop-detect Description: official tasks used for installation of Debian systems This package contains data about the standard tasks available on a Debian system. Package: tmux Status: install ok installed Priority: optional Section: admin Installed-Size: 1106 Maintainer: Romain Francoise Architecture: amd64 Version: 3.3a-3 Depends: libc6 (>= 2.34), libevent-core-2.1-7 (>= 2.1.8-stable), libtinfo6 (>= 6), libutempter0 (>= 1.1.5) Description: terminal multiplexer tmux enables a number of terminals (or windows) to be accessed and controlled from a single terminal like screen. tmux runs as a server-client system. A server is created automatically when necessary and holds a number of sessions, each of which may have a number of windows linked to it. Any number of clients may connect to a session, or the server may be controlled by issuing commands with tmux. Communication takes place through a socket, by default placed in /tmp. Moreover tmux provides a consistent and well-documented command interface, with the same syntax whether used interactively, as a key binding, or from the shell. It offers a choice of vim or Emacs key layouts. Homepage: https://tmux.github.io/ Package: traceroute Status: install ok installed Priority: important Section: net Installed-Size: 155 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Version: 1:2.1.2-1 Depends: libc6 (>= 2.34) Description: Traces the route taken by packets over an IPv4/IPv6 network The traceroute utility displays the route used by IP packets on their way to a specified network (or Internet) host. Traceroute displays the IP number and host name (if possible) of the machines along the route taken by the packets. Traceroute is used as a network debugging tool. If you're having network connectivity problems, traceroute will show you where the trouble is coming from along the route. . Install traceroute if you need a tool for diagnosing network connectivity problems. Homepage: https://traceroute.sourceforge.net/ Package: transmission-cli Status: install ok installed Priority: optional Section: net Installed-Size: 2739 Maintainer: Sandro Tosi Architecture: amd64 Source: transmission Version: 3.00-2.1+deb12u1 Replaces: transmission-daemon (<< 1.50-1) Depends: transmission-common (= 3.00-2.1+deb12u1), libc6 (>= 2.34), libcurl4 (>= 7.18.0), libevent-2.1-7 (>= 2.1.8-stable), libminiupnpc17 (>= 1.9.20140610), libnatpmp1 (>= 20150609), libssl3 (>= 3.0.0), zlib1g (>= 1:1.1.4) Suggests: transmission-daemon (= 3.00-2.1+deb12u1), transmission-gtk (= 3.00-2.1+deb12u1) Breaks: transmission-daemon (<< 1.50-1) Description: lightweight BitTorrent client (command line programs) Transmission is a set of lightweight BitTorrent clients (in GUI, CLI and daemon form). All its incarnations feature a very simple, intuitive interface on top on an efficient, cross-platform back-end. . This package contains a (deprecated) stand-alone command-line client, transmission-remote to interface with transmission-daemon and tools to create, edit and inspect torrent files. Homepage: https://transmissionbt.com/ Package: transmission-common Status: install ok installed Priority: optional Section: net Installed-Size: 865 Maintainer: Sandro Tosi Architecture: all Source: transmission Version: 3.00-2.1+deb12u1 Replaces: transmission-gtk (<< 2.10-1) Breaks: transmission-gtk (<< 2.10-1) Description: lightweight BitTorrent client (common files) Transmission is a set of lightweight BitTorrent clients (in GUI, CLI and daemon form). All its incarnations feature a very simple, intuitive interface on top on an efficient, cross-platform back-end. . This package contains the common files for the different transmission versions. Homepage: https://transmissionbt.com/ Package: transmission-daemon Status: install ok installed Priority: optional Section: net Installed-Size: 599 Maintainer: Sandro Tosi Architecture: amd64 Source: transmission Version: 3.00-2.1+deb12u1 Replaces: transmission-cli (<< 1.40-1) Depends: lsb-base (>= 3.0), transmission-common (= 3.00-2.1+deb12u1), libc6 (>= 2.34), libcurl4 (>= 7.18.0), libevent-2.1-7 (>= 2.1.8-stable), libminiupnpc17 (>= 1.9.20140610), libnatpmp1 (>= 20150609), libssl3 (>= 3.0.0), libsystemd0, zlib1g (>= 1:1.1.4) Pre-Depends: adduser Recommends: transmission-cli (>= 1.50-1) Breaks: transmission-cli (<< 1.40-1) Conffiles: /etc/default/transmission-daemon fae00fedd4b0ca3df4af5d8e925ea5f4 /etc/init.d/transmission-daemon 5619476738539402c3b137c94a90ad83 /etc/init/transmission-daemon.conf 5dd828d4b16a78c076ef64e33237dee1 /etc/transmission-daemon/README.json 5a1d6f82cb7cdd13d5a83f79506d340a /etc/transmission-daemon/settings.json 276d615568cff1c718147e18bb296cfe Description: lightweight BitTorrent client (daemon) Transmission is a set of lightweight BitTorrent clients (in GUI, CLI and daemon form). All its incarnations feature a very simple, intuitive interface on top on an efficient, cross-platform back-end. . This package contains the transmission-daemon. For the associated transmission-remote, see the package transmission-cli. Homepage: https://transmissionbt.com/ Package: tzdata Status: install ok installed Priority: required Section: localization Installed-Size: 2573 Maintainer: GNU Libc Maintainers Architecture: all Multi-Arch: foreign Version: 2026b-0+deb12u1 Provides: tzdata-bookworm Depends: debconf (>= 0.5) | debconf-2.0 Description: time zone and daylight-saving time data This package contains data required for the implementation of standard local time for many representative locations around the globe. It is updated periodically to reflect changes made by political bodies to time zone boundaries, UTC offsets, and daylight-saving rules. Homepage: https://www.iana.org/time-zones Package: ucf Status: install ok installed Priority: standard Section: utils Installed-Size: 214 Maintainer: Manoj Srivastava Architecture: all Multi-Arch: foreign Version: 3.0043+nmu1+deb12u1 Depends: debconf (>= 0.5) | debconf-2.0, sensible-utils Conffiles: /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e Description: Update Configuration File(s): preserve user changes to config files Debian policy mandates that user changes to configuration files must be preserved during package upgrades. The easy way to achieve this behavior is to make the configuration file a 'conffile', in which case dpkg handles the file specially during upgrades, prompting the user as needed. . This is appropriate only if it is possible to distribute a default version that will work for most installations, although some system administrators may choose to modify it. This implies that the default version will be part of the package distribution, and must not be modified by the maintainer scripts during installation (or at any other time). . This script attempts to provide conffile-like handling for files that may not be labelled conffiles, and are not shipped in a Debian package, but handled by the postinst instead. This script allows one to maintain files in /etc, preserving user changes and in general offering the same facilities while upgrading that dpkg normally provides for 'conffiles'. . Additionally, this script provides facilities for transitioning a file that had not been provided with conffile-like protection to come under this schema, and attempts to minimize questions asked at installation time. Indeed, the transitioning facility is better than the one offered by dpkg while transitioning a file from a non-conffile to conffile status. Package: udev Status: install ok installed Priority: important Section: admin Installed-Size: 10925 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: foreign Source: systemd Version: 252.39-1~deb12u2 Depends: libacl1 (>= 2.2.23), libblkid1 (>= 2.37.2), libc6 (>= 2.34), libcap2 (>= 1:2.10), libkmod2 (>= 15), libselinux1 (>= 3.1~), adduser, libudev1 (= 252.39-1~deb12u2) Conffiles: /etc/init.d/udev e9424814d107af7d8f58a22b1011810a /etc/udev/udev.conf bf60be80a4cc51271a1618edf5a6d66f Description: /dev/ and hotplug management daemon udev is a daemon which dynamically creates and removes device nodes from /dev/, handles hotplug events and loads drivers at boot time. Homepage: https://www.freedesktop.org/wiki/Software/systemd Package: ueberzug Status: install ok installed Priority: optional Section: graphics Installed-Size: 190 Maintainer: Debian Python Team Architecture: amd64 Source: ueberzug (18.1.9-4) Version: 18.1.9-4+b1 Depends: python3-attr, python3-docopt, python3-pil, python3-xlib, python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.14), libx11-6, libxext6 Description: command line utility which draws images on terminals Ueberzug is a command line utility which draws images on terminals using child windows. . It has several advantages over w3mimgdisplay: . - no race conditions, as a new window is created to display images - expose events will be processed, so images will be redrawn on switched workspaces - tmux support (excluding multi pane windows) - terminals without the WINDOWID environment variable are supported - chars are used as both the position and size unit - no memory leak (and unlimited cache) Homepage: https://github.com/seebye/ueberzug Package: ufw Status: install ok installed Priority: optional Section: admin Installed-Size: 857 Maintainer: Jamie Strandboge Architecture: all Version: 0.36.2-1 Depends: iptables, ucf, python3:any, debconf (>= 0.5) | debconf-2.0 Suggests: rsyslog Breaks: iptables-persistent, netfilter-persistent Conffiles: /etc/default/ufw a921dd9d167380b04de4bc911915ea44 /etc/init.d/ufw 4156943ab8a824fcf4b04cc1362eb230 /etc/logrotate.d/ufw 969308e0ddfb74505f0da47b49ada218 /etc/rsyslog.d/20-ufw.conf 98e2f72c9c65ca8d6299886b524e80d1 /etc/ufw/applications.d/ufw-bittorent d9451245a3fb2aa85ed91533ce530f27 /etc/ufw/applications.d/ufw-chat 73204a7a2819499d7802bc83b7e63ee9 /etc/ufw/applications.d/ufw-directoryserver 28888bb4f7fa81ea2ca23bb86995df5b /etc/ufw/applications.d/ufw-dnsserver 7a2634d40515a5baab2d5b355873e1e6 /etc/ufw/applications.d/ufw-fileserver d43adc11063000fc3c1a824071382047 /etc/ufw/applications.d/ufw-loginserver 366b3845c4360ea626f78875a400446b /etc/ufw/applications.d/ufw-mailserver 37e7910a1da915bcf60dac1c2d157377 /etc/ufw/applications.d/ufw-printserver 47e009dc96a9eac7b3f2c2483a889756 /etc/ufw/applications.d/ufw-proxyserver 6e035b6921d41aeee89c3d5867c593c5 /etc/ufw/applications.d/ufw-webserver 07a41595f0b2c9865b7220bea998f8cf /etc/ufw/sysctl.conf 7723079fc108eda8f57eddab3079c70a Description: program for managing a Netfilter firewall The Uncomplicated FireWall is a front-end for iptables, to make managing a Netfilter firewall easier. It provides a command line interface with syntax similar to OpenBSD's Packet Filter. It is particularly well-suited as a host-based firewall. Homepage: https://launchpad.net/ufw Package: unzip Status: install ok installed Priority: optional Section: utils Installed-Size: 379 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Version: 6.0-28 Depends: libbz2-1.0, libc6 (>= 2.34) Suggests: zip Description: De-archiver for .zip files InfoZIP's unzip program. With the exception of multi-volume archives (ie, .ZIP files that are split across several disks using PKZIP's /& option), this can handle any file produced either by PKZIP, or the corresponding InfoZIP zip program. . This version supports encryption. Homepage: https://infozip.sourceforge.net/UnZip.html Package: usr-is-merged Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 13 Maintainer: Marco d'Itri Architecture: all Multi-Arch: foreign Source: usrmerge Version: 37~deb12u1 Breaks: cruft-ng (<< 0.4.4~), initramfs-tools (<< 0.121~) Conflicts: acl (<< 2.2.52-3~), arptables (<< 0.0.4+snapshot20181021-1~), coreutils (<< 8.24-1~), cruft (<< 0.9.44~), cryptsetup (<< 2:1.7.0-1~), davfs2 (<< 1.5.2-1.2~), debianutils (<< 4.5~), dhcpcd (<< 1:5~), ebtables (<< 2.0.10.4+snapshot20181205-1~), elvis-tiny (<< 1.4-24~), kbd (<< 2.0.4-4~), ksh (<< 93u+20120801-3.1~), less (<< 481-2~), libbrlapi-dev (<< 5.3.1-1~), libc0.1 (<< 2.35-4), libc0.3 (<< 2.35-4), libc6 (<< 2.35-4), libc6.1 (<< 2.35-4), libdm0-dev, libjson-c-dev (<< 0.12.1-1.1~), libparted1.8-10 (<< 1.8.8.git.2008.03.24-11.2~), libpng12-0 (<< 1.2.54-6~), libusb-0.1-4 (<< 2:0.1.12-28~), lustre-utils (<< 1.8.5+dfsg-3.2~), mksh (<< 52b-1~), molly-guard (<< 0.7.1+exp1~), musl-dev (<< 1.1.9-1.1~), nano (<< 2.3.99pre3-1~), open-iscsi (<< 2.0.873+git0.3b4b4500-13~), open-vm-tools (<< 2:10.0.5-3227872-2~), policycoreutils (<< 2.4-4~), safe-rm (<< 0.12-6~), tcsh (<< 6.18.01-4~), vsearch (<< 1.9.5-2~), xfsdump (<< 3.1.6+nmu1~), xfslibs-dev (<< 4.9.0+nmu1~), yp-tools (<< 3.3-5~), zsh (<< 5.2-4~) Description: Transitional package to assert a merged-/usr system This package can be successfully installed only on merged-/usr systems. . It can be safely removed once no other package depends on it anymore. Homepage: https://wiki.debian.org/UsrMerge Package: util-linux Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 4978 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: foreign Version: 2.38.1-5+deb12u3 Replaces: hardlink Provides: hardlink Depends: util-linux-extra Pre-Depends: libblkid1 (>= 2.37.2), libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libcrypt1 (>= 1:4.1.0), libmount1 (>= 2.38), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsmartcols1 (>= 2.38), libsystemd0, libtinfo6 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Recommends: sensible-utils Suggests: dosfstools, kbd, util-linux-locales Conflicts: hardlink Conffiles: /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45 /etc/pam.d/su 60fbbe65c90d741bc0d380543cefe8af /etc/pam.d/su-l 756fef5687fecc0d986e5951427b0c4f Description: miscellaneous system utilities This package contains a number of important utilities, most of which are oriented towards maintenance of your system. Some of the more important utilities included in this package allow you to view kernel messages, create new filesystems, view block device information, interface with real time clock, etc. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: util-linux-extra Status: install ok installed Priority: standard Section: utils Installed-Size: 366 Maintainer: util-linux packagers Architecture: amd64 Multi-Arch: foreign Source: util-linux Version: 2.38.1-5+deb12u3 Replaces: util-linux (<< 2.38~) Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libsmartcols1 (>= 2.38) Breaks: util-linux (<< 2.38~) Conffiles: /etc/default/hwclock 02f94aaf57aff4e2e6751ec7b877a997 /etc/init.d/hwclock.sh c06bc68c12cbdd9c7f60ba25ee587efe Description: interactive login tools Tools commonly found on systems where humans login interactively, or are needed with non-standard system configurations. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: util-linux-locales Status: install ok installed Priority: optional Section: localization Installed-Size: 7969 Maintainer: util-linux packagers Architecture: all Multi-Arch: foreign Source: util-linux Version: 2.38.1-5+deb12u3 Depends: util-linux (>= 2.38.1) Description: locales files for util-linux This package contains the internationalization files for the util-linux package. . They are needed when you want the programs in util-linux to print their messages in other languages than English. Homepage: https://www.kernel.org/pub/linux/utils/util-linux/ Package: vim Status: install ok installed Priority: optional Section: editors Installed-Size: 3650 Maintainer: Debian Vim Maintainers Architecture: amd64 Version: 2:9.0.1378-2+deb12u2 Provides: editor Depends: vim-common (= 2:9.0.1378-2+deb12u2), vim-runtime (= 2:9.0.1378-2+deb12u2), libacl1 (>= 2.2.23), libc6 (>= 2.34), libgpm2 (>= 1.20.7), libselinux1 (>= 3.1~), libsodium23 (>= 1.0.14), libtinfo6 (>= 6) Suggests: ctags, vim-doc, vim-scripts Description: Vi IMproved - enhanced vi editor Vim is an almost compatible version of the UNIX editor Vi. . Many new features have been added: multi level undo, syntax highlighting, command line history, on-line help, filename completion, block operations, folding, Unicode support, etc. . This package contains a version of vim compiled with a rather standard set of features. This package does not provide a GUI version of Vim. See the other vim-* packages if you need more (or less). Homepage: https://www.vim.org/ Package: vim-common Status: install ok installed Priority: important Section: editors Installed-Size: 245 Maintainer: Debian Vim Maintainers Architecture: all Multi-Arch: foreign Source: vim Version: 2:9.0.1378-2+deb12u2 Recommends: xxd, vim | vim-gtk3 | vim-motif | vim-nox | vim-tiny Conffiles: /etc/vim/vimrc a28f17fea43e405b96cdffd3d6522382 Description: Vi IMproved - Common files Vim is an almost compatible version of the UNIX editor Vi. . This package contains files shared by all non GUI-enabled vim variants available in Debian. Examples of such shared files are: manpages and configuration files. Homepage: https://www.vim.org/ Package: vim-runtime Status: install ok installed Priority: optional Section: editors Installed-Size: 36406 Maintainer: Debian Vim Maintainers Architecture: all Multi-Arch: foreign Source: vim Version: 2:9.0.1378-2+deb12u2 Recommends: vim | vim-gtk3 | vim-motif | vim-nox | vim-tiny Breaks: vim-tiny (<< 2:9.0.1378-2+deb12u2) Enhances: vim-tiny Description: Vi IMproved - Runtime files Vim is an almost compatible version of the UNIX editor Vi. . This package contains vimtutor and the architecture independent runtime files, used, if available, by all vim variants available in Debian. Example of such runtime files are: online documentation, rules for language-specific syntax highlighting and indentation, color schemes, and standard plugins. Homepage: https://www.vim.org/ Package: vim-tiny Status: install ok installed Priority: important Section: editors Installed-Size: 1689 Maintainer: Debian Vim Maintainers Architecture: amd64 Source: vim Version: 2:9.0.1378-2+deb12u2 Provides: editor Depends: vim-common (= 2:9.0.1378-2+deb12u2), libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~), libtinfo6 (>= 6) Suggests: indent Conffiles: /etc/vim/vimrc.tiny 750b961d2a0bb4851c7a924cb428a72f Description: Vi IMproved - enhanced vi editor - compact version Vim is an almost compatible version of the UNIX editor Vi. . This package contains a minimal version of Vim compiled with no GUI and a small subset of features. This package's sole purpose is to provide the vi binary for base installations. . If a vim binary is wanted, try one of the following more featureful packages: vim, vim-nox, vim-motif, or vim-gtk3. Homepage: https://www.vim.org/ Package: wget Status: install ok installed Priority: standard Section: web Installed-Size: 3521 Maintainer: Noël Köthe Architecture: amd64 Multi-Arch: foreign Version: 1.21.3-1+deb12u1 Depends: libc6 (>= 2.34), libgnutls30 (>= 3.7.5), libidn2-0 (>= 0.6), libnettle8, libpcre2-8-0 (>= 10.22), libpsl5 (>= 0.16.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Recommends: ca-certificates Conflicts: wget-ssl Conffiles: /etc/wgetrc c43064699caf6109f4b3da0405c06ebb Description: retrieves files from the web Wget is a network utility to retrieve files from the web using HTTP(S) and FTP, the two most widely used internet protocols. It works non-interactively, so it will work in the background, after having logged off. The program supports recursive retrieval of web-authoring pages as well as FTP sites -- you can use Wget to make mirrors of archives and home pages or to travel the web like a WWW robot. . Wget works particularly well with slow or unstable connections by continuing to retrieve a document until the document is fully downloaded. Re-getting files from where it left off works on servers (both HTTP and FTP) that support it. Both HTTP and FTP retrievals can be time stamped, so Wget can see if the remote file has changed since the last retrieval and automatically retrieve the new version if it has. . Wget supports proxy servers; this can lighten the network load, speed up retrieval, and provide access behind firewalls. Homepage: https://www.gnu.org/software/wget/ Package: whiptail Status: install ok installed Priority: important Section: utils Installed-Size: 57 Maintainer: Alastair McKinstry Architecture: amd64 Multi-Arch: foreign Source: newt (0.52.23-1) Version: 0.52.23-1+b1 Depends: libc6 (>= 2.34), libnewt0.52 (>= 0.52.23), libpopt0 (>= 1.14), libslang2 (>= 2.2.4) Description: Displays user-friendly dialog boxes from shell scripts Whiptail is a "dialog" replacement using newt instead of ncurses. It provides a method of displaying several different types of dialog boxes from shell scripts. This allows a developer of a script to interact with the user in a much friendlier manner. Homepage: https://pagure.io/newt Package: x11-common Status: install ok installed Priority: optional Section: x11 Installed-Size: 308 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: xorg Version: 1:7.7+23 Depends: lsb-base (>= 1.3-9ubuntu2) Conffiles: /etc/X11/Xreset 05d188ccac2f3360af8fe0c216640233 /etc/X11/Xreset.d/README b344c222b5daf81926fd3270df374b5f /etc/X11/Xresources/x11-common b640adb1cd646ec097f8df5b6deca9f0 /etc/X11/Xsession 9383a93bc2172001d9b9f46de7dd2256 /etc/X11/Xsession.d/20x11-common_process-args 6957432229b7305a40cb84a7a63edd4e /etc/X11/Xsession.d/30x11-common_xresources 61cebe25ee0c64e981b88958dfee6f9c /etc/X11/Xsession.d/35x11-common_xhost-local 3080616d080574d7b06c2b2a20af53dd /etc/X11/Xsession.d/40x11-common_xsessionrc db544c8543d1cb3762b9859288e77040 /etc/X11/Xsession.d/50x11-common_determine-startup b4570043736ae7f22947067b6d28ab8d /etc/X11/Xsession.d/90x11-common_ssh-agent 71116d351e6eab4ecce9b84229a4ece0 /etc/X11/Xsession.d/99x11-common_start 3874d5e8f3ec888f69adb126e223e168 /etc/X11/Xsession.options 210cd520efa87a5197cac01e10b3a84a /etc/X11/rgb.txt 09ee098b83d94c7c046d6b55ebe84ae1 /etc/init.d/x11-common b121acab13ded0fb7e9bc90ad55c9a43 Description: X Window System (X.Org) infrastructure x11-common contains the filesystem infrastructure required for further installation of the X Window System in any configuration; it does not provide a full installation of clients, servers, libraries, and utilities required to run the X Window System. . A number of terms are used to refer to the X Window System, including "X", "X Version 11", "X11", "X11R6", and "X11R7". The version of X used in Debian is derived from the version released by the X.Org Foundation, and is thus often also referred to as "X.Org". All of the preceding quoted terms are functionally interchangeable in an Debian system. Homepage: https://www.x.org/ Package: xdg-user-dirs Status: install ok installed Priority: optional Section: utils Installed-Size: 376 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: foreign Version: 0.18-1 Depends: libc6 (>= 2.34) Conffiles: /etc/xdg/autostart/xdg-user-dirs.desktop 19075979fa4ac105aa08763bd68e9589 /etc/xdg/user-dirs.conf 602a95ec7fe4068512bebb712c41102d /etc/xdg/user-dirs.defaults b8595963fe74aeb65e854ba9da7f1acb Description: tool to manage well known user directories xdg-user-dirs is a tool to help manage "well known" user directories like the desktop folder and the music folder. It also handles localization (i.e. translation) of the filenames. . The way it works is that xdg-user-dirs-update is run very early in the login phase. This program reads a configuration file, and a set of default directories. It then creates localized versions of these directories in the users home directory and sets up a config file in $(XDG_CONFIG_HOME)/user-dirs.dirs (XDG_CONFIG_HOME defaults to ~/.config) that applications can read to find these directories. Homepage: https://www.freedesktop.org/wiki/Software/xdg-user-dirs Package: xdg-utils Status: install ok installed Priority: optional Section: utils Installed-Size: 329 Maintainer: Debian freedesktop.org maintainers Architecture: all Multi-Arch: foreign Version: 1.1.3-4.1 Recommends: libfile-mimeinfo-perl, libnet-dbus-perl, libx11-protocol-perl, x11-utils, x11-xserver-utils Description: desktop integration utilities from freedesktop.org xdg-utils contains utilities for integrating applications with the desktop environment, regardless of which desktop environment is used. . The following utilities are included: . * xdg-desktop-menu - Install desktop menu items * xdg-desktop-icon - Install icons on the user's desktop * xdg-email - Compose a new email in the user's preferred email client, potentially with subject and other info filled in * xdg-icon-resource - Install icon resources * xdg-mime - Query and install MIME types and associations * xdg-open - Open a URI in the user's preferred application that handles the respective URI or file type * xdg-screensaver - Enable, disable, or suspend the screensaver * xdg-settings - Get or set the default web browser and URI handlers Homepage: https://www.freedesktop.org/wiki/Software/xdg-utils/ Package: xfsprogs Status: install ok installed Priority: optional Section: admin Installed-Size: 3444 Maintainer: XFS Development Team Architecture: amd64 Version: 6.1.0-1 Replaces: xfsdump (<< 3.0.0) Provides: fsck-backend Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.20), libedit2 (>= 2.11-20080614-0), libicu72 (>= 72.1~rc-1~), libinih1 (>= 53), liburcu8 (>= 0.13.0), libuuid1 (>= 2.16), python3:any Suggests: xfsdump, acl, attr, quota Breaks: xfsdump (<< 3.0.0) Description: Utilities for managing the XFS filesystem A set of commands to use the XFS filesystem, including mkfs.xfs. . XFS is a high performance journaling filesystem which originated on the SGI IRIX platform. It is completely multi-threaded, can support large files and large filesystems, extended attributes, variable block sizes, is extent based, and makes extensive use of Btrees (directories, extents, free space) to aid both performance and scalability. . Refer to the documentation at https://xfs.wiki.kernel.org/ for complete details. Homepage: https://xfs.wiki.kernel.org/ Package: xkb-data Status: install ok installed Priority: optional Section: x11 Installed-Size: 6925 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: xkeyboard-config Version: 2.35.1-1 Breaks: libx11-6 (<< 2:1.4.3), x11-xkb-utils (<< 7.7+5) Description: X Keyboard Extension (XKB) configuration data This package contains configuration data used by the X Keyboard Extension (XKB), which allows selection of keyboard layouts when using a graphical interface. . Every X11 vendor provides its own XKB data files, so keyboard layout designers have to send their layouts to several places. The xkeyboard-config project has been launched at FreeDesktop in order to provide a central repository that could be used by all vendors. Homepage: https://www.freedesktop.org/Software/XKeyboardConfig Package: xml-core Status: install ok installed Priority: optional Section: text Installed-Size: 118 Maintainer: Debian XML-SGML group Architecture: all Multi-Arch: foreign Version: 0.18+nmu1 Depends: sed (>= 4.1.2-8), sgml-base (>= 1.28) Suggests: debhelper (>= 9.20120909) Conffiles: /etc/sgml/xml-core.cat 055ba0bd3154c0a58b9bf8a0c9ecf2fa Description: XML infrastructure and XML catalog file support This package creates the XML infrastructure directories and provides XML catalog file support in compliance with the current Debian XML Policy draft: . * infrastructure directories: - /etc/xml - /usr/share/xml/{declaration,entities,misc,schema} - /usr/local/share/xml/{declaration,entities,misc,schema} . * XML catalog schema: OASIS XML Catalog Committee Specification 1.0 . * update-xmlcatalog(8): tool for maintaining the root XML catalog file and the package XML catalog files in the '/etc/xml' directory as well as local XML catalog files. . * dh_installxmlcatalogs(1): debhelper tool for installing local XML catalog files and registering XML entities in package XML catalog files and the root XML catalog file (requires debhelper package) Package: xz-utils Status: install ok installed Priority: standard Section: utils Installed-Size: 1226 Maintainer: Sebastian Andrzej Siewior Architecture: amd64 Multi-Arch: foreign Version: 5.4.1-1 Replaces: lzip (<< 1.8~rc2), manpages-de (<< 4.17.0-2~bpo11+1), manpages-fr (<< 4.17.0-2~bpo11+1), xz-lzma Provides: lzma Depends: libc6 (>= 2.34), liblzma5 (>= 5.4.0) Breaks: lzip (<< 1.8~rc2), manpages-de (<< 4.17.0-2~bpo11+1), manpages-fr (<< 4.17.0-2~bpo11+1) Conflicts: lzma (<< 9.22-1), xz-lzma Description: XZ-format compression utilities XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . This package provides the command line tools for working with XZ compression, including xz, unxz, xzcat, xzgrep, and so on. They can also handle the older LZMA format, and if invoked via appropriate symlinks will emulate the behavior of the commands in the lzma package. . The XZ format is similar to the older LZMA format but includes some improvements for general use: . * 'file' magic for detecting XZ files; * crc64 data integrity check; * limited random-access reading support; * improved support for multithreading (not used in xz-utils); * support for flushing the encoder. Homepage: https://tukaani.org/xz/ Package: zip Status: install ok installed Priority: optional Section: utils Installed-Size: 616 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Version: 3.0-13 Depends: libbz2-1.0, libc6 (>= 2.34) Recommends: unzip Description: Archiver for .zip files This is InfoZIP's zip program. It produces files that are fully compatible with the popular PKZIP program; however, the command line options are not identical. In other words, the end result is the same, but the methods differ. :-) . This version supports encryption. Homepage: https://infozip.sourceforge.net/Zip.html Package: zlib1g Status: install ok installed Priority: optional Section: libs Installed-Size: 168 Maintainer: Mark Brown Architecture: amd64 Multi-Arch: same Source: zlib Version: 1:1.2.13.dfsg-1 Provides: libz1 Depends: libc6 (>= 2.14) Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12) Conflicts: zlib1 (<= 1:1.0.4-7) Description: compression library - runtime zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the shared library. Homepage: http://zlib.net/ Package: zlib1g-dev Status: install ok installed Priority: optional Section: libdevel Installed-Size: 1310 Maintainer: Mark Brown Architecture: amd64 Multi-Arch: same Source: zlib Version: 1:1.2.13.dfsg-1 Provides: libz-dev Depends: zlib1g (= 1:1.2.13.dfsg-1), libc6-dev | libc-dev Conflicts: zlib1-dev Description: compression library - development zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the development support files. Homepage: http://zlib.net/ Package: zstd Status: install ok installed Priority: optional Section: utils Installed-Size: 2102 Maintainer: RPM packaging team Architecture: amd64 Multi-Arch: foreign Source: libzstd Version: 1.5.4+dfsg2-5 Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), liblz4-1 (>= 1.8.0), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 12), zlib1g (>= 1:1.1.4) Description: fast lossless compression algorithm -- CLI tool Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting real-time compression scenarios at zlib-level compression ratio. . This package contains the CLI program implementing zstd. Homepage: https://github.com/facebook/zstd